Pioneer DEH-P3500MP User Manual [en, es]

Operation Manual Manual de instrucciones

Multi-CD control High power CD/MP3 player with RDS tuner

Reproductor de CD/MP3 de alta potencia con sintonizador de RDS y control de CD múltiple

DEH-P3500MP

English Español

Contents

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away

in a safe place for future reference.

Before You Start

About this unit 4 About this manual 4 Precautions 4 In case of trouble 4 Features 4 Protecting your unit from theft 5



Removing the front panel 5



Attaching the front panel 5

Whats What Head unit 6

Power ON/OFF

Turning the unit on 7 Selecting a source 7 Turning the unit off 7

Tuner

Listening to the radio 8 Introduction of advanced tuner operation 9 Storing and recalling broadcast

frequencies 9 Tuning in strong signals 9 Storing the strongest broadcast

frequencies 10

RDS

Introduction of RDS operation 11 Switching the RDS display 11 Selecting alternative frequencies 11



Using PI Seek 12



Using Auto PI Seek for preset stations 12



Limiting stations to regional programming 12

Receiving traffic announcements 12



Responding to the TP alarm 13

PTY list 14

Built-in CD Player

Playing a CD 15 Introduction of advanced built-in CD player

operation 16 Repeating play 16 Playing tracks in a random order 16 Scanning tracks of a CD 16 Pausing CD playback 17 Selecting the search method 17 Searching every 10 track in the current

disc 17 Using disc title functions 18



Entering disc titles 18



Displaying disc titles 18

Using CD TEXT functions 19



Displaying titles on CD TEXT discs 19



Scrolling titles in the display 19

MP3 Player

Playing a MP3 20 Introduction of advanced built-in CD player

(MP3) operation 21 Repeating play 21 Playing tracks in a random order 22 Scanning folders and tracks 22 Pausing MP3 playback 23 Selecting the search method 23 Searching every 10 track in the current

folder 23 Switching the ID3 tag display on MP3

disc 23 Displaying text information on MP3 disc 24 Scrolling text information in the display 24

Multi-CD Player

Playing a CD 25 50-disc multi-CD player 25

Contents

English

Introduction of advanced multi-CD player

operation 26 Repeating play 26 Playing tracks in a random order 26 Scanning CDs and tracks 27 Pausing CD playback 27 Using ITS playlists 27



Creating a playlist with ITS programming 27



Playback from your ITS playlist 28



Erasing a track from your ITS playlist 28



Erasing a CD from your ITS playlist 29

Using disc title functions 29



Entering disc titles 29



Displaying disc titles 30

Using CD TEXT functions 30



Displaying titles on CD TEXT discs 30



Scrolling titles in the display 30

Using compression and bass emphasis 30

Audio Adjustments

Introduction of audio adjustments 31 Using balance adjustment 31 Using the equalizer 31



Recalling equalizer curves 32



Adjusting equalizer curves 32



Fine adjusting equalizer curve 32 Adjusting loudness 33 Front image enhancer (F.I.E.) 33 Adjusting source levels 34

Switching the auxiliary setting 36

Other Functions Using the AUX source 37



Selecting AUX as the source 37



Setting the AUX title 37

Additional Information

Understanding built-in CD player error

messages 38 Cellular telephone muting 38 CD player and care 38 CD-R/CD-RW discs 39 MP3 files 39 About folders and MP3 files 40 Terms 41 Specifications 42

Initial Settings

Adjusting initial settings 35 Setting the FM tuning step 35 Switching Auto PI Seek 35 Switching the warning tone 35

Section

HHHHHHHHHHHHHH

Before You Start

About this unit

This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC).

The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. Use in other areas may result in improper reception. The RDS function operates only in areas with FM stations broadcasting RDS signals.

About this manual

This unit features a number of sophisticated functions ensuring superior reception and operation. All the functions have been designed for the easiest possible use, but many are not self-explanatory. This operation manual will help you benefit fully from this productspotential and to maximize your listening enjoyment. We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this unit. It is especially important that you read and observe precautions on this page and in other sections.

Precautions

! A CLASS 1 LASER PRODUCT label is af-

fixed to the bottom of this unit.

CLASS 1 LASER PRODUCT

! The Pioneer CarStereo-Pass is for use only

in Germany.

! Keep this manual handy as a reference for

operating procedures and precautions.

! Always keep the volume low enough so you

can hear sounds outside of the car.

! Protect this product from moisture. ! If the battery is disconnected or dis-

charged, the preset memory will be erased and must be reprogrammed.

In case of trouble

Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station.

Features

CD playback

Music CD/CD-R/CD-RW playback is possible.

MP3 file playback

It is possible to play back MP3 files recorded on CD-ROM/CD-R/CD-RW (ISO9660 Level 1/ Level 2 standard recordings). ! Supply of this product only conveys a li-

cense for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenue-generating) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An independent license for such use is required. For details, please visit http://www.mp3licensing.com.

Before You Start

HHHHHHHHHHHHHH

Section

Protecting your unit from theft

The front panel can be detached from the head unit and stored in the protective case provided to discourage theft. ! If the front panel is not detached from the

head unit within five seconds of turning off the ignition, a warning tone will sound.

! You can turn off the warning tone. See

Switching the warning tone on page 35.

Important

! Never use force or grip the display and the

buttons tightly when removing or attaching.

! Avoid subjecting the front panel to excessive

shocks.

! Keep the front panel out of direct sunlight and

high temperatures.

Removing the front panel

1 Press OPEN to open the front panel.

2 Grip the left side of the front panel and pull it gently outward.

Take care not to grip it tightly or drop it.

Attaching the front panel

% Replace the front panel by holding it upright to this unit and clipping it securely into the mounting hooks.

English

3 Put the front panel into the protective case provided for safe keeping.

Section

HHHHHHHHHHHHHH

Whats What

Head unit

1 TA button

Press to turn traffic announcements function on or off. Press and hold to turn NEWS function on or off.

2 DISPLAY button

Press to select different displays.

3 PAUSE button

Press to turn pause on or off.

4 AUDIO button

Press to select various sound quality controls.

5 OPEN button

Press to open the front panel.

6 a/b/c/d buttons

Press to do manual seek tuning, fast forward, reverse and track search controls. Also used for controlling functions.

8 BAND button

Press to select among three FM and MW/ LW bands and cancel the control mode of functions.

9 LOUDNESS button

Press to turn loudness on or off.

a 16 buttons

Press for preset tuning and disc number search when using a multi-CD player.

b SOURCE button

This unit is turned on by selecting a source. Press to cycle through all of the available sources.

c VOLUME

Press to increase or decrease the volume.

d EQ button

Press to select various equalizer curves.

7 FUNCTION button

Press to select functions.

Power ON/OFF

HHHHHHHHHHHHHH

Section

Turning the unit on

% Press SOURCE to turn the unit on.

When you select a source the unit is turned on.

Selecting a source

You can select a source you want to listen to. To switch to the built-in CD player, load a disc in this unit (refer to page 15).

% Press SOURCE to select a source.

Press SOURCE repeatedly to switch between the following sources:

Built-in CD playerTelevisionTuner Multi-CD playerExternal unit 1External unit 2AUX

Notes

! In the following cases, the sound source will

not change:  When a unit corresponding to each source

is not connected to this unit.

 When no disc is set in this unit.  When no magazine is set in the multi-CD

player.

 When the AUX (auxiliary input) is set to off

(refer to page 36).

! External unit refers to a Pioneer product (such

as one available in the future) that, although incompatible as a source, enables control of basic functions by this unit. Two external units can be controlled by this unit. When two external units are connected, the allocation of them to external unit 1 or external unit 2 is automatically set by this unit.

! When this units blue/white lead is connected

to the cars auto-antenna relay control terminal, the cars antenna extends when this units source is turned on. To retract the antenna, turn the source off.

Turning the unit off

% Press SOURCE and hold until the unit turns off.

English

Section

HHHHHHHHHHHHHH

Tuner

Listening to the radio

These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on the next page. This units AF (alternative frequencies search) function can be turned on and off. AF should be off for normal tuning operation (refer to page 11).

1 Band indicator

Shows which band the radio is tuned to, MW, LW or FM.

2 Frequency indicator

Shows to which frequency the tuner is tuned.

3 Stereo (5) indicator

Shows that the frequency selected is being broadcast in stereo.

4 To perform manual tuning, press c or d with quick presses.

The frequencies move up or down step by step.

5 To perform seek tuning, press and hold c or d for about one second and release.

The tuner will scan the frequencies until a broadcast strong enough for good reception is found.

# You can cancel seek tuning by pressing either c or d with a quick press. # If you press and hold c or d you can skip broadcasting stations. Seek tuning starts as soon as you release the buttons.

Note

When the frequency selected is being broadcast in stereo the stereo (5) indicator will light.

4 Preset number indicator

Shows what preset has been selected.

1 Press SOURCE to select the tuner.

Press SOURCE until tuner is selected as the source.

2 Use VOLUME to adjust the sound level.

Press to increase or decrease the volume.

3 Press BAND to select a band.

Press BAND until the desired band is displayed, F1, F2, F3 for FM or MW/LW.

Tuner

HHHHHHHHHHHHHH

Section

Introduction of advanced tuner operation

1 LOC indicator

Shows when local seek tuning is on.

2 Function display

Shows the function status.

3 Preset number indicator

Shows what preset has been selected.

% Press FUNCTION to display the function names.

Press FUNCTION repeatedly to switch between the following functions:

BSM (best stations memory)REG (regional) LOCAL (local seek tuning)TA (traffic an-

nouncement standby)AF (alternative frequencies search)NEWS (news program interruption)

# To return to the frequency display, press BAND. # If MW/LW band is selected, you can only select BSM or LOCAL.

Note

If you do not operate the function within about 30 seconds, the display is automatically returned to the frequency display.

Storing and recalling broadcast frequencies

If you press any of the preset tuning buttons 16 you can easily store up to six broadcast frequencies for later recall with the touch of a button.

% When you find a frequency that you want to store in memory press a preset tuning button 16 and hold until the preset number stops flashing.

The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory. The next time you press the same preset tuning button 16 the radio station frequency is recalled from memory.

Notes

! Up to 18 FM stations, 6 for each of the three

FM bands, and 6 MW/LW stations can be stored in memory.

! You can also use a and b to recall radio sta-

tion frequencies assigned to preset tuning buttons 16.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.

1 Press FUNCTION to select LOCAL.

Press FUNCTION until LOCAL appears in the display.

English

2 Press a to turn local seek tuning on.

Local seek sensitivity (e.g., LOCAL 2) appears in the display.

Section

Tuner

3 Press c or d to set the sensitivity.

There are four levels of sensitivity for FM and two levels for MW/LW: FM: LOCAL 1LOCAL 2LOCAL 3

LOCAL 4

MW/LW: LOCAL 1LOCAL 2 The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.

4 When you want to return to normal seek tuning, press b to turn local seek tuning off. LOCAL:OFF appears in the display.

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning buttons 16 and once stored there you can tune in to those frequencies with the touch of a button.

HHHHHHHHHHHHHH

1 Press FUNCTION to select BSM.

Press FUNCTION until BSM appears in the display.

2 Press a to turn BSM on. BSM begins to flash. While BSM is flashing

the six strongest broadcast frequencies will be stored under preset tuning buttons 16 in order of their signal strength. When finished, BSM stops flashing.

# To cancel the storage process, press b.

Note

Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using 16.

RDS

HHHHHHHHHHHHHH

Section

Introduction of RDS operation

RDS (radio data system) is a system for providing information along with FM broadcasts. This inaudible information provides such features as program service name, program type, traffic announcement standby and automatic tuning, intended to aid radio listeners in finding and tuning in to a desired station.

1 Program service name

Shows the type of broadcast program.

2 TP (

Shows when a TP station is tuned in.

3 News (

Shows when the set news program is received.

% Press FUNCTION to display the function names.

Press FUNCTION repeatedly to switch between the following functions:

BSM (best stations memory)REG (regional) LOCAL (local seek tuning)TA (traffic an-

nouncement standby)AF (alternative frequencies search)NEWS (news program interruption)

# To return to the frequency display, press BAND. # If MW/LW band is selected, you can only select BSM or LOCAL.

) indicator

! RDS service may not be provided by all sta-

tions.

! RDS functions like AF and TA are only active

when your radio is tuned to a RDS station.

Switching the RDS display

When you tune in a RDS station its program service name is displayed. If you want to know the frequency you can.

% Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings: Program service namePTY information Frequency PTY (program type ID code) information is listed on page 14.

# PTY information and the frequency of the current station appears on the display for eight seconds. # If a PTY code of zero is received from a station, NONE is displayed. This indicates that the station has not defined its program contents. # If the signal is too weak for this unit to pick up the PTY code, NO PTY is displayed.

Selecting alternative frequencies

If you are listening to a broadcast and the reception becomes weak or there are other problems, the unit will automatically search for a different station in the same network which is broadcasting a stronger signal. ! AF is on as a default.

English

Notes

! If you do not operate the function within about

30 seconds, the display is automatically returned to the frequency display.

1 Press FUNCTION to select AF.

Press FUNCTION until AF appears in the display.

Section

HHHHHHHHHHHHHH

RDS

2 Press a to turn AF on. Press a and AF :ON is displayed.

3 Press b to turn AF off. Press b and AF :OFF is displayed.

Notes

! Only RDS stations are tuned in during seek

tuning or BSM when AF is on.

! When you recall a preset station, the tuner

may update the preset station with a new frequency from the stations AF list. (This is only available when using presets on the F1 or F2 bands.) No preset number appears on the display if the RDS data for the station received differs from that for the originally stored station.

! Sound may be temporarily interrupted by an-

other program during a AF frequency search.

! AF can be turned on or off independently for

each FM band.

Using PI Seek

If the unit fails to find a suitable alternative frequency, or if you are listening to a broadcast and the reception becomes weak, the unit will automatically search for a different station with the same programming. During the search, PI SEEK is displayed and the output is muted. The muting is discontinued after completion of the PI Seek, whether or not a different station is found.

Using Auto PI Seek for preset stations

When preset stations cannot be recalled, as when travelling long distances, the unit can be set to perform PI Seek during preset recall. ! The default setting for Auto PI Seek is off.

See Switching Auto PI Seek on page 35.

Limiting stations to regional programming

When AF is used to automatically retune frequencies, the regional function limits the selection to stations broadcasting regional programs.

1 Press FUNCTION to select REG.

Press FUNCTION until REG appears in the display.

2 Press a to turn the regional function on. Press a and REG :ON is displayed.

3 Press b to turn the regional function off. Press b and REG :OFF is displayed.

Notes

! Regional programming and regional networks

are organized differently depending on the country (i.e., they may change according to the hour, state or broadcast area).

! The preset number may disappear on the dis-

play if the tuner tunes in a regional station which differs from the originally set station.

! The regional function can be turned on or off

independently for each FM band.

Receiving traffic announcements

TA (traffic announcement standby) lets you receive traffic announcements automatically, no matter what source you are listening to. TA can be activated for both a TP station (a station that broadcasts traffic information) or an enhanced other networks TP station (a station carrying information which cross-references TP stations).

RDS

HHHHHHHHHHHHHH

Section

1 Tune in a TP or enhanced other networks TP station.

When you are tuned into a TP or enhanced other networks TP station the TP ( tor will light.

2 Press TA to turn traffic announcement standby on.

Press TA and TA O N appears in the display. The tuner will standby for traffic announcements.

# To turn traffic announcements standby off, press TA again.

3 Use VOLUME to adjust the TA volume when a traffic announcement begins.

Press to increase or decrease the volume. The newly set volume is stored in memory and recalled for subsequent traffic announcements.

4 Press TA while a traffic announcement is being received to cancel the announcement.

The tuner returns to the original source but remains in the standby mode until TA is pressed again.

# You can also cancel the announcement by pressing SOURCE, BAND, a, b, c or d while a traffic announcement is being received.

) indica-

Responding to the TP alarm

When a TP or enhanced other networksTP station is lost due to a weak signal the TP ( indicator is extinguished and a series of short beeps, about five seconds long, sound to remind you to select another TP or enhanced other networks TP station.

% When listening to the tuner, tune in another TP or enhanced other networksTP station.

English

)

Notes

! You can also turn on or off TA function in the

menu that appears with the pressing of FUNCTION.

! The system switches back to the original

source following traffic announcement reception.

! Only TP and enhanced other networks TP sta-

tions are tuned in during seek tuning or BSM when TA is on.

Section

RDS

PTY list

Specific Type of program

NEWS News

AFFAIRS Current affairs

INFO General information and advice

SPORT Sports

WEATHER Weather reports/meteorological infor-

FINANCE Stock market reports, commerce,

POP MUS Popular music

ROCK MUS Contemporary modern music

EASY MUS Easy listening music

OTH MUS Non categorized music

JAZZ Jazz

COUNTRY Country music

NAT MUS National music

OLDIES Oldies music, golden oldies

FOLK MUS Folk music

L. CLASS Light classical music

CLASSIC Serious classical music

EDUCATE Educational programs

DRAMA All radio plays and serials

CULTURE National or regional culture

SCIENCE Nature, science and technology

VARIED Light entertainment

CHILDREN Childrens

SOCIAL Social affairs

RELIGION Religion affairs or services

PHONE IN Phone In

TOURING Travel programs, not for announce-

LEISURE Hobbies and recreational activities

DOCUMENT Documentaries

mation

trading, etc.

ments about traffic problems

HHHHHHHHHHHHHH

Built-in CD Player

HHHHHHHHHHHHHH

Section

Playing a CD

1 32

These are the basic steps necessary to play a CD with your built-in CD player. More advanced CD operation is explained starting on the next page.

1 Play time indicator

Shows the elapsed playing time of the current track.

2 TXT indicator

Shows when a CD TEXT is inserted.

3 Track number indicator

Shows the track currently playing.

1 Press OPEN to open the front panel.

CD loading slot appears.

# After a CD has been inserted, press SOURCE to select the built-in CD player.

2 Insert a CD into the CD loading slot.

Playback will automatically start.

CD loading slot

3 Close the front panel.

English

4 Use VOLUME to adjust the sound level.

Press to increase or decrease the volume.

5 To perform fast forward or reverse, press and hold c or d.

# If you select the search method to ROUGH, pressing and holding c or d enables you to search every ten track in the current disc. (Refer to Selecting the search method on page 17.)

6 To skip back or forward to another track, press c or d.

Pressing d skips to the start of the next track. Pressing c once skips to the start of the current track. Pressing again will skip to the previous track.

Notes

! The built-in CD player plays one, standard, 12-

cm or 8-cm (single) CD at a time. Do not use an adapter when playing 8-cm CDs.

! Do not insert anything other than a CD into

the CD loading slot.

! If you cannot insert a disc completely or if

after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting the disc again.

! If the built-in CD player does not operate prop-

erly, an error message such as ERROR-11 may be displayed. Refer to Understanding built-in CD player error messages on page

38.

EJECT button

# You can eject a CD by pressing EJECT. # To avoid a malfunction, make sure that no

metal object comes into contact with the terminals when the front panel is open.

Section

HHHHHHHHHHHHHH

Built-in CD Player

Introduction of advanced built-in CD player operation

1 RPT indicator

Shows when repeat play is turned on.

2 Function display

Shows the function status.

% Press FUNCTION to display the function names.

Press FUNCTION repeatedly to switch between the following functions:

RPT (repeat play)RDM (random play) SCAN (scan play)PAUSE (pause) FF/REV (search method)TAG (ID3 tag dis-

play)

# To return to the playback display, press BAND.

Notes

! When playing audio data (CD-DA), it is not ef-

fective even if you turn TAG (ID3 tag display) on. (Refer to page 23.)

! If you do not operate the function within about

30 seconds, the display is automatically returned to the playback display.

2 Press a to turn repeat play on. RPT :ON appears in the display. The track cur-

rently playing will play and then repeat.

3 Press b to turn repeat play off. RPT :OFF appears in the display. The track cur-

rently playing will continue to play and then play the next track.

Note

If you perform track search or fast forward/reverse, repeat play is automatically cancelled.

Playing tracks in a random order

Random play lets you play back tracks on the CD in a random order.

1 Press FUNCTION to select RDM.

Press FUNCTION until RDM appears in the display.

2 Press a to turn random play on. RDM :ON appears in the display. Tracks will

play in a random order.

3 Press b to turn random play off. RDM :OFF appears in the display. Tracks will

continue to play in order.

Repeating play

Repeat play lets you hear the same track over again.

1 Press FUNCTION to select RPT.

Press FUNCTION until RPT appears in the display.

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of each track on the CD.

1 Press FUNCTION to select SCAN.

Press FUNCTION until SCAN appears in the display.

Built-in CD Player

HHHHHHHHHHHHHH

Section

2 Press a to turn scan play on. SCAN:ON appears in the display. The first 10

seconds of each track is played.

3 When you find the desired track press b to turn scan play off. SCAN:OFF appears in the display. The track

will continue to play.

# If the display has automatically returned to the playback display, select SCAN again by pressing FUNCTION.

Note

After scanning of a CD is finished, normal playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of the CD.

1 Press FUNCTION to select PAUSE.

Press FUNCTION until PAUSE appears in the display.

2 Press a to turn pause on. PAUSE:ON appears in the display. Play of the

current track pauses.

3 Press b to turn pause off. PAUSE:OFF appears in the display. Play will re-

sume at the same point that you turned pause on.

Note

You can also turn pause on or off by pressing PAUSE.

Selecting the search method

You can switch the search method between fast forward/reverse and searching every 10 track.

1 Press FUNCTION to select FF/REV.

Press FUNCTION until FF/REV appears in the display.

# If the search method ROUGH has been pre- viously selected, ROUGH will be displayed.

2 Press c or d to select the search method.

Press c or d until the desired search method appears in the display.

! FF/REV  Fast forward and reverse ! ROUGH  Searching every 10 track

Searching every 10 track in the current disc

If a disc contains over 10 tracks, you can search every 10 track. When a disc contains a lot of tracks, you can roughly search the track you want to play.

1 Select the search method ROUGH.

Refer to Selecting the search method on this page.

2 Press and hold c or d to search every 10 track in a disc.

# If a disc contains less than 10 tracks, pressing and holding d recalls the last track of a disc. Also, if the remaining number of tracks after searching every 10 tracks are less than 10, pressing and holding d recalls the last track of a disc.

English

Section

HHHHHHHHHHHHHH

Built-in CD Player

# If a disc contains less than 10 tracks, pressing and holding c recalls the first track of a disc. Also, if the remaining number of tracks after searching every 10 tracks are less than 10, pressing and holding c recalls the first track of a disc.

Using disc title functions

You can input CD titles and display the title. The next time you insert a CD for which you have entered a title, the title of that CD will be displayed.

Entering disc titles

Disc title input lets you input CD titles up to 8 letters long and up to 48 disc titles into the built-in CD player.

1 Play a CD that you want to enter the title.

2 Press FUNCTION and hold until TITLE IN appears in the display.

# When playing a CD TEXT disc, you cannot switch to TITLE IN. The disc title will have already been recorded on a CD TEXT disc.

4 Press d to move the cursor to the next character position.

When the letter you want is displayed, press d to move the cursor to the next position and then select the next letter. Press c to move backwards in the display.

5 Move the cursor to the last position by pressing d after entering the title.

When you press d one more time, the entered title is stored in memory.

6 Press BAND to return to the playback display.

Notes

! Titles remain in memory, even after the disc

has been removed from built-in CD player, and are recalled when the disc is reinserted.

! After data for 48 discs has been stored in

memory, data for a new disc will overwrite the oldest one.

! If you connect a multi-CD player, you can

input disc titles for up to 100 discs.

Displaying disc titles

You can display the title of any disc that has had a disc title entered.

3 Press a or b to select a letter of the alphabet.

Each press of a will display a letter of the alphabet in A B C ... X Y Z, numbers and symbols in 1 2 3 ... > [ ] order. Each press of b will display a letter in the reverse order, such as Z Y X ... C B A order.

% Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings: Play timeDISC TTL (disc title) When you select DISC TTL, the title of the currently playing disc is shown in the display.

# If no title has been entered for the currently playing disc, NO TITLE is displayed.

Built-in CD Player

HHHHHHHHHHHHHH

Section

Using CD TEXT functions

Some discs have certain information encoded on the disc during manufacture. These discs may contain such information as the CD title, track title, artists name and playback time and are called CD TEXT discs. Only these specially encoded CD TEXT discs support the functions listed below.

Displaying titles on CD TEXT discs

% Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings: Play timeDISC TTL (disc title)ART NAME (disc artist name) TRK TTL (track title) ART NAME (track artist name)

# If specific information has not been recorded on a CD TEXT disc, NO XXXX will be displayed (e.g., NO T-TTL).

Scrolling titles in the display

This unit can display the first 8 letters only of

DISC TTL, ART NAME, TRK TTL and ART NAME. When the recorded information is

longer than 8 letters, you can scroll the text to the left so that the rest of the title can be seen.

English

% Press DISPLAY and hold until the title begins to scroll to the left.

The rest of the title will appear in the display.

Section

HHHHHHHHHHHHHH

MP3 Player

Playing a MP3

1 32 4

These are the basic steps necessary to play an MP3 with your built-in CD player. More advanced MP3 operation is explained starting on the next page.

1 Folder number indicator

Shows the folder number currently playing.

2 MP3 indicator

Shows when the MP3 file is playing.

3 Play time indicator

Shows the elapsed playing time of the current track (file).

4 Track number indicator

Shows the track (file) currently playing. ! If a track number 100 to 199 is selected,

d on the left of the track number indicator will light.

! If a track number 200 or more is selected,

d on the left of the track number indicator will blink.

1 Press OPEN to open the front panel.

CD loading slot appears.

# After a CD-ROM has been inserted, press

SOURCE to select the built-in CD player.

2 Insert a CD-ROM into the CD loading slot.

Playback will automatically start.

CD loading slot

EJECT button

# You can eject a CD-ROM by pressing EJECT. # To avoid a malfunction, make sure that no

metal object comes into contact with the terminals when the front panel is open.

3 Close the front panel.

4 Use VOLUME to adjust the sound level.

Press to increase or decrease the volume.

5 Press a or b to select a folder.

# You cannot select a folder that does not have an MP3 file recorded in it. # To return to folder 01 (ROOT), press and hold BAND. However, if folder 01 (ROOT) contains no files, playback commences with folder 02.

6 To perform fast forward or reverse, press and hold c or d.

# This is fast forward and reverse operation only for the file being played. This operation is canceled when the previous or next file is reached. # If you select the search method to ROUGH, pressing and holding c or d enables you to search every ten track in the current folder. (Refer to Selecting the search method on page 23.)

7 To skip back or forward to another track, press c or d.

Pressing d skips to the start of the next track. Pressing c once skips to the start of the current track. Pressing again will skip to the previous track.

MP3 Player

HHHHHHHHHHHHHH

Section

Notes

! When playing discs with MP3 files and audio

data (CD-DA) such as CD-EXTRA and MIXEDMODE CDs, both types can be played only by switching mode between MP3 and CD-DA with BAND.

! If you have switched between playback of

MP3 files and audio data (CD-DA), playback starts at the first track on the disc.

! The built-in CD player can play back an MP3

file recorded on CD-ROM. (Refer to page 39 for files that can be played back.)

! Do not insert anything other than a CD into

the CD loading slot.

! There is sometimes a delay between starting

up playback and the sound being issued. This is particularly the case when playing back multi-session and many folders. When being read in, FRMTREAD is displayed.

! If you cannot insert a disc completely or if

after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting the disc again.

! Playback is carried out in order of file number.

Folders are skipped if they contain no files. (If folder 01 (ROOT) contains no files, playback commences with folder 02.)

! When playing back files recorded as VBR

(variable bit rate) files, the play time will not be correctly displayed if fast forward or reverse operations are used.

! If inserted disc contains no files that can be

played back, NO AUDIO is displayed.

! There is no sound on fast forward or reverse. ! If the built-in CD player does not operate prop-

erly, an error message such as ERROR-11 may be displayed. Refer to Understanding built-in CD player error messages on page

38.

Introduction of advanced built-in CD player (MP3) operation

1 RPT indicator

Shows when repeat range is selected to current track (file).

2 Function display

Shows the function status.

% Press FUNCTION to display the function names.

Press FUNCTION repeatedly to switch between the following functions:

RPT (repeat play)RDM (random play) SCAN (scan play)PAUSE (pause) FF/REV (search method)TAG (ID3 tag dis-

play)

# To return to the playback display, press BAND.

Note

If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display.

Repeating play

For MP3 playback, there are three repeat play ranges: FLD (folder repeat), TRK (one-track repeat) and DSC (repeat all tracks).

1 Press FUNCTION to select RPT.

Press FUNCTION until RPT appears in the display.

English

Section

HHHHHHHHHHHHHH

MP3 Player

2 Press c or d to select the repeat range.

Press c or d until the desired repeat range appears in the display.

! FLD  Repeat the current folder ! TRK  Repeat just the current track ! DSC  Repeat all tracks

Notes

! If you select other folder during repeat play,

the repeat play range changes to DSC.

! If you perform track search or fast forward/re-

verse during TRK, the repeat play range changes to FLD.

! When FLD is selected, it is not possible to play

back a subfolder of that folder.

Playing tracks in a random order

Random play lets you play back tracks in a random order within the repeat range, FLD and DSC.

1 Select the repeat range.

Refer to Repeating play on the previous page.

2 Press FUNCTION to select RDM.

Press FUNCTION until RDM appears in the display.

3 Press a to turn random play on. RDM :ON appears in the display. Tracks will

play in a random order within the previously selected FLD or DSC ranges.

4 Press b to turn random play off. RDM :OFF appears in the display. Tracks will

continue to play in order.

Note

If you turn random play on during FLD and then return to the playback display, FRDM appears in the display.

Scanning folders and tracks

While you are using FLD, the beginning of each track in the selected folder plays for about 10 seconds. When you are using DSC, the beginning of the first track of each folder is played for about 10 seconds.

1 Select the repeat range.

Refer to Repeating play on the previous page.

2 Press FUNCTION to select SCAN.

Press FUNCTION until SCAN appears in the display.

3 Press a to turn scan play on. SCAN:ON appears in the display. The first 10

seconds of each track of the current folder (or the first track of each folder) is played.

4 When you find the desired track (or folder) press b to turn scan play off. SCAN:OFF appears in the display. The track

(or folder) will continue to play.

# If the display has automatically returned to the playback display, select SCAN again by pressing FUNCTION.

Notes

! After track or folder scanning is finished, nor-

mal playback of the tracks will begin again.

! If you turn scan play on during FLD and then

return to the playback display, FSCN appears in the display.

MP3 Player

HHHHHHHHHHHHHH

Section

Pausing MP3 playback

Pause lets you temporarily stop playback of the MP3.

1 Press FUNCTION to select PAUSE.

Press FUNCTION until PAUSE appears in the display.

2 Press a to turn pause on. PAUSE:ON appears in the display. Play of the

current track pauses.

3 Press b to turn pause off. PAUSE:OFF appears in the display. Play will re-

sume at the same point that you turned pause on.

Note

You can also turn pause on or off by pressing PAUSE.

Selecting the search method

You can switch the search method between fast forward/reverse and searching every 10 track.

1 Press FUNCTION to select FF/REV.

Press FUNCTION until FF/REV appears in the display.

# If the search method ROUGH has been pre- viously selected, ROUGH will be displayed.

2 Press c or d to select the search method.

Press c or d until the desired search method appears in the display.

! FF/REV  Fast forward and reverse ! ROUGH  Searching every 10 track

Searching every 10 track in the current folder

If the current folder contains over 10 tracks, you can search every 10 track. When the one folder contains a lot of tracks, you can roughly search the track you want to play.

1 Select the search method ROUGH.

Refer to Selecting the search method on this page.

2 Press and hold c or d to search every 10 track in the current folder.

# If the current folder contains less than 10 tracks, pressing and holding d recalls the last track of the folder. Also, if the remaining number of tracks after searching every 10 tracks are less than 10, pressing and holding d recalls the last track of the folder. # If the current folder contains less than 10 tracks, pressing and holding c recalls the first track of the folder. Also, if the remaining number of tracks after searching every 10 tracks are less than 10, pressing and holding c recalls the first track of the folder.

Switching the ID3 tag display on MP3 disc

It is possible to turn the ID3 tag display on MP3 disc on or off, if MP3 disc contains the ID3 tag. ! ID3 tag refers to text information such as

track title and artist name.

1 Press FUNCTION to select TAG.

Press FUNCTION until TAG appears in the display.

2 Press a to turn ID3 tag display on. TAG :ON appears in the display.

English

Section

HHHHHHHHHHHHHH

MP3 Player

3 Press b to turn ID3 tag display off. TAG :OFF appears in the display.

Note

When you turn the ID3 tag on, this unit returns to the beginning of the current track in order to read the text information.

Displaying text information on MP3 disc

Text information recorded on a MP3 disc can be displayed.

% Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings: Play timeFOLDER (folder name)FILE (file name)TRK TTL (track title)ART NAME (artist name)ALBM TTL (album title) COMMENT (comment)Bit rate

# When playing back files recorded as VBR (variable bit rate) files, the bit rate value is not displayed even after switching to bit rate. (VBR will be displayed.) # When you have turned ID3 tag display off, you cannot switch to TRK TTL, ART NAME, ALBM TTL and COMMENT. # If specific information has not been recorded on a MP3 disc, NO XXXX will be displayed (e.g., NO NAME).

you can scroll the text to the left so that the rest of the text information can be seen.

% Press DISPLAY and hold until the text information begins to scroll to the left.

The rest of the text information will appear in the display.

Scrolling text information in the display

This unit can display the first 8 letters only of

FOLDER, FILE, TRK TTL, ART NAME, ALBM TTL and COMMENT. When the re-

corded information is longer than 8 letters,

Multi-CD Player

HHHHHHHHHHHHHH

Section

Playing a CD

You can use this unit to control a multi-CD player, which is sold separately.

These are the basic steps necessary to play a CD with your multi-CD player. More advanced CD operation is explained starting on the next page.

1 Disc number indicator

Shows the disc currently playing.

2 Play time indicator

Shows the elapsed playing time of the current track.

3 Track number indicator

Shows the track currently playing.

1 Press SOURCE to select the multi-CD player.

Press SOURCE until multi-CD is selected as the source.

4 To perform fast forward or reverse, press and hold c or d.

5 To skip back or forward to another track, press c or d.

Pressing d skips to the start of the next track. Pressing c once skips to the start of the current track. Pressing again will skip to the previous track.

Notes

! When the multi-CD player performs the pre-

paratory operations, READY is displayed.

! If the multi-CD player does not operate prop-

erly, an error message such as ERROR-11 may be displayed. Refer to the multi-CD player owners manual.

! If there are no discs in the multi-CD player ma-

gazine, NO DISC is displayed.

50-disc multi-CD player

Only those functions described in this manual are supported for 50-disc multi-CD players.

English

2 Use VOLUME to adjust the sound level.

Press to increase or decrease the volume.

3 Select a disc you want to listen to with the 16 buttons.

For discs located at 1 to 6, press the corresponding number button. If you want to select a disc located at 7 to 12, press and hold the corresponding numbers such as 1 for disc 7, until the disc number appears in the display.

# You can also sequentially select a disc by pressing a/b.

Section

HHHHHHHHHHHHHH

Multi-CD Player

Introduction of advanced multi-CD player operation

1 RPT indicator

Shows when repeat range is selected to current track.

2 Function display

Shows the function status.

% Press FUNCTION to display the function names.

Press FUNCTION repeatedly to switch between the following functions:

RPT (repeat play)RDM (random play) SCAN (scan play)ITS-P (ITS play)PAUSE (pause)COMP (compression and DBE)

# To return to the playback display, press BAND.

Note

If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display.

2 Press c or d to select the repeat range.

Press c or d until the desired repeat range appears in the display.

! MCD  Repeat all discs in the multi-CD

player

! TRK  Repeat just the current track ! DSC  Repeat the current disc

Notes

! If you select other discs during repeat play,

the repeat play range changes to MCD.

! If you perform track search or fast forward/re-

verse during TRK, the repeat play range changes to DSC.

Playing tracks in a random order

Random play lets you play back tracks in a random order within the repeat range, MCD and DSC.

1 Select the repeat range.

Refer to Repeating play on this page.

2 Press FUNCTION to select RDM.

Press FUNCTION until RDM appears in the display.

Repeating play

There are three repeat play ranges for the multi-CD player: MCD (multi-CD player repeat), TRK (one-track repeat) and DSC (disc repeat).

1 Press FUNCTION to select RPT.

Press FUNCTION until RPT appears in the display.

3 Press a to turn random play on. RDM :ON appears in the display. Tracks will

play in a random order within the previously selected MCD or DSC ranges.

4 Press b to turn random play off. RDM :OFF appears in the display. Tracks will

continue to play in order.

Multi-CD Player

HHHHHHHHHHHHHH

Section

Note

If you turn random play on during DSC and then return to the playback display, DRDM appears in the display.

Scanning CDs and tracks

While you are using DSC, the beginning of each track on the selected disc plays for about 10 seconds. When you are using MCD, the beginning of the first track of each disc is played for about 10 seconds.

1 Select the repeat range.

Refer to Repeating play on the previous page.

2 Press FUNCTION to select SCAN.

Press FUNCTION until SCAN appears in the display.

3 Press a to turn scan play on. SCAN :ON appears in the display. The first 10

seconds of each track of the current disc (or the first track of each disc) is played.

4 When you find the desired track (or disc) press b to turn scan play off. SCAN :OFF appears in the display. The track

(or disc) will continue to play.

# If the display has automatically returned to the playback display, select SCAN again by pressing FUNCTION.

Notes

! After track or disc scanning is finished, nor-

mal playback of the tracks will begin again.

! If you turn scan play on during DSC and then

return to the playback display, DSCN appears in the display.

Pausing CD playback

Pause lets you temporarily stop playback of the CD.

1 Press FUNCTION to select PAUSE.

Press FUNCTION until PAUSE appears in the display.

2 Press a to turn pause on. PAUSE:ON appears in the display. Play of the

current track pauses.

3 Press b to turn pause off. PAUSE:OFF appears in the display. Play will re-

sume at the same point that you turned pause on.

Note

You can also turn pause on or off by pressing PAUSE.

Using ITS playlists

ITS (instant track selection) lets you make a playlist of favorite tracks from those in the multi-CD player magazine. After you have added your favorite tracks to the playlist you can turn on ITS play and play just those selections.

Creating a playlist with ITS programming

You can use ITS to enter and playback up to 99 tracks per disc, up to 100 discs (with the disc title). (With multi-CD players sold before the CDX-P1250 and CDX-P650, up to 24 tracks can be stored in the playlist.)

1 Play a CD that you want to program.

Press a or b to select a CD.

English

Section

HHHHHHHHHHHHHH

Multi-CD Player

2 Press FUNCTION and hold until TITLE IN appears in the display, then press FUNCTION to select ITS.

After TITLE IN is displayed, press FUNCTION repeatedly, the following functions appear in the display: TITLE IN (disc title input)ITS (ITS programming)

3 Select a desired track by pressing c or d.

4 Press a to store the currently playing track in the playlist. IN is displayed briefly and the currently playing

selection is added to your playlist. The display then shows ITS again.

5 Press BAND to return to the playback display.

Note

After data for 100 discs has been stored in memory, data for a new disc will overwrite the oldest one.

Playback from your ITS playlist

ITS play lets you listen to the tracks that you have entered into your ITS playlist. When you turn on ITS play, tracks from your ITS playlist in the multi-CD player will begin to play.

1 Select the repeat range.

Refer to Repeating play on page 26.

2 Press FUNCTION to select ITS-P.

Press FUNCTION until ITS-P appears in the display.

3 Press a to turn ITS play on. ITS-P:ON appears in the display. Playback be-

gins of those tracks from your playlist within the previously selected MCD or DSC ranges.

# If no tracks in the current range are programmed for ITS play then EMPTY is displayed.

4 Press b to turn ITS play off. ITS-P:OFF appears in the display. Playback will

continue in normal order from the currently playing track and CD.

Erasing a track from your ITS playlist

When you want to delete a track from your ITS playlist, you can if ITS play is on. If ITS play is already on, skip to step 2. If ITS play is not already on, press FUNCTION.

1 Play a CD you want to delete a track from your ITS playlist, and turn ITS play on.

Refer to Playback from your ITS playlist on this page.

2 Press FUNCTION and hold until TITLE IN appears in the display, then press FUNCTION to select ITS.

After TITLE IN is displayed, press FUNCTION until ITS appears in the display.

3 Select a desired track by pressing c or d.

4 Press b to erase a track from your ITS playlist.

The currently playing selection is erased from your ITS playlist and playback of the next track from your ITS playlist begins.

# If there are no tracks from your playlist in the current range, EMPTY is displayed and normal play resumes.

5 Press BAND to return to the playback display.

+ 64 hidden pages