• This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE
Marking Directive (93/68/EEC).
The tuner frequencies on this product are allocated for use in Western Europe, Asia, the
Middle East, Africa and Oceania. Use in other areas may result in improper reception. The
RDS function operates only in areas with FM stations broadcasting RDS signals.
About This Manual
This product features a number of sophisticated functions ensuring superior reception and
operation. All are designed for the easiest possible use, but many are not self-explanatory.
This operation manual is intended to help you benefit fully from their potential and to
maximize your listening enjoyment.
We recommend that you familiarize yourself with the functions and their operation by
reading through the manual before you use this product. It is especially important that you
read and observe the “Precaution” on the next page and in other sections.
3
Precaution
• A “CLASS 1 LASER PRODUCT” label is affixed to the bottom of the player.
• The Pioneer CarStereo-Pass is for use only in Germany.
• Keep this manual handy as a reference for operating procedures and precautions.
• Always keep the volume low enough for outside sounds to be audible.
• Protect this product from moisture.
• If the battery is disconnected, the preset memory will be erased and must be reprogrammed.
In Case of Trouble
Should this product fail to operate properly, contact your dealer or nearest authorized
Pioneer Service Station.
ENGLISHESPAÑOLDEUTSCHFRANÇAIS
ITALIANONEDERLANDS
4
Basic Operation
To Listen to Music
The following explains the initial operations required before you can listen to music.
Note:
• Loading a disc in this product. (Refer to page 7.)
1. Select the desired source (e.g. Tuner).
Each press changes the Source ...
Each press of the SOURCE button selects the desired source in the following order:
Built-in CD player = Tuner
Note:
• When no disc is set in this product, built-in CD player source will not change.
• When this product’s blue/white lead is connected to the car’s Auto-antenna relay control terminal,
the car’s Auto-antenna extends when this product’s source is switched ON. To retract the antenna,
switch the source OFF.
2. Raise or lower the volume.
3. Turn the source OFF.
Hold for 1 second
5
Basic Operation of Tuner
This product’s AF function can be switched ON and OFF. AF should be switched OFF for
normal tuning operations. (Refer to page 10.)
Manual and Seek Tuning
• You can select the tuning method by changing the length of time
you press the 2/3 button.
Manual Tuning (step by step)0.5 seconds or less
Seek Tuning 0.5 seconds or more
Note:
• If you continue pressing the button for longer than 0.5 seconds, you can skip broadcast
stations. Seek Tuning starts as soon as you release the button.
• Stereo indicator “” lights when a stereo station is selected.
Frequency Indicator
ENGLISHESPAÑOLDEUTSCHFRANÇAIS
Band Indicator
Preset Tuning
• You can memorize broadcast stations in buttons 1
through 6 for easy, one-touch station recall.
Preset station recall2 seconds or less
Broadcast station preset memory2 seconds or more
Note:
• Up to 12 FM stations (6 in F1 (FM1) and F2 (FM2)) and 6 MW/LW
stations can be stored in memory.
• You can also use the 5 or ∞ buttons to recall broadcast stations
memorized in buttons 1 through 6.
Preset Number Indicator
ITALIANONEDERLANDS
Band
F1 (FM1)
= F2 (FM2)
= MW/LW
6
Basic Operation
Basic Operation of Built-in CD Player
Eject
CD Loading Slot
Note:
• The built-in CD player plays one standard 12 cm
or 8 cm (single) CD at a time. Do not use an
adapter when playing 8 cm CD.
• Don’t insert any materials except for CD into
CD loading slot.
Track Number Indicator
Note:
• The CD function can be turned ON/OFF
with the disc remaining in this product.
(Refer to page 5.)
• A disc left partially inserted after ejection may incur damage or fall out.
Play Time Indicator
Track Search and Fast Forward/Reverse
• You can select between Track Search or Fast Forward/Reverse by pressing
the 2/3 button for a different length of time.
Track Search0.5 seconds or less
Fast Forward/Reverse Continue pressing
Note:
• If a disc cannot be inserted fully or playback fails, make sure the recorded side is down.
Push the EJECT button and check the disc for damage before reinserting it.
• If a disc is inserted with the recorded side up, it will be ejected automatically after a few moments.
• If the built-in CD player cannot operate properly, an error message (such as “ERROR-14”)
appears on the display. Refer to “Built-in CD Player’s Error Message” on page 27.
7
Tuner Operation
Local Seek Tuning
This function selects only stations with especially strong signals.
• Switch the Local ON/OFF
with the LOCAL/BSM button.
“LOC”
Best Stations Memory (BSM)
The BSM function stores stations in memory automatically.
• Press the LOCAL/BSM button for 2 seconds to switch
BSM ON.
The stations with the strongest signals will be stored under buttons
1–6 and in order of their signal
strength.
• To cancel the process, press the LOCAL/BSM button before memorization is
complete.
ENGLISH
ESPAÑOLDEUTSCHFRANÇAIS
ITALIANONEDERLANDS
8
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.