Pioneer BD-V1000 User Manual

DIGITAL HOME TERMINAL

BD-V1000 Series

Operating Instructions

CONTENTS

ABOUT THIS MANUAL........................................ 4

BD-V1000 DIAGRAM ........................................... 4

FEATURE IDENTIFICATION ................................. 5

CONNECTIONS ................................................... 6

CABLE TV RECEPTION ....................................... 7

TROUBLESHOOTING.......................... Back Cover

TRADEMARKS AND COPYRIGHTS..... Back Cover

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.

IMPORTANT

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.

CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

Trade Name: PIONEER
Model Number: BD-V1000 Series

FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE

FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.

Responsible Party: PIONEER ELECTRONICS SERVICE, INC.
Address: P.O. Box 1760. Long Beach, CA 90801-1760
Phone: [phone]
Webpage address: www.PioneerUSA.com

Information to User

Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to
operate the equipment.

2
<BRB1050>

IMPORTANT SAFEGUARDS

READ INSTRUCTIONS – All the safety and

operating instructions should be read before
the appliance is operated.

RETAIN INSTRUCTIONS – The safety and

operating instructions should be retained
for future reference.

HEED WARNINGS – All warnings on the

appliance and in the operating instructions
should be adhered to.

FOLLOW INSTRUCTIONS – All operating and

usage instructions should be followed.

CLEANING – Do not use liquid cleaners or

aerosol cleaners. Use a polishing cloth or
soft dry cloth.

ATTACHMENTS – Do not use attachments not

recommended by appliance manufacturer
as they may cause hazards.

WATER AND MOISTURE – Do not use this

appliance near water – for example, near a
bathtub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming
pool, etc.

ACCESSORIES – Do not place this appliance on

an unstable cart, stand, tripod, bracket, or
table. The appliance may fall, causing serious
injury to a child or adult, and serious damage
to the appliance. Use only with a cart, stand,
tripod, bracket, or table recommended by
the manufacturer, or sold with the appliance.
Any mounting of the appliance should follow
the manufacturer's instructions, and should
use a mounting accessory recommended by
the manufacturer.

CART – An appliance and cart combination

should be moved with care. Quick stops,
excessive force, and uneven surfaces may
cause the appliance and cart combination to
overturn.

VENTILATION – Slots and openings in the

cabinet are provided for ventilation to ensure
reliable operation of the appliance and to
protect it from overheating. These openings
must not be blocked or covered. They should
never be blocked by placing the appliance
on a bed, sofa, rug, or other similar surface.
This appliance should never be placed near
or over a radiator or heat register. This
appliance should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided or the
manufacturer's instructions have been
adhered to.

POWER SOURCES – The appliance should be

operated only on the voltage indicated on
the product label. If you are not sure of the
type of power supply to your home, consult
your appliance dealer or local power
company.

POLARIZATION – This unit's power cord has a

polarized plug (one blade is wider than the
other). This plug will fit into the power outlet
only one way. This is a safety feature. If you
are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.

POWER-CORD PROTECTION – Power-supply

cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them. Pay particular
attention to cords at plugs, convenience
receptacles, and the point where they exit
from the appliance.

OUTDOOR ANTENNA GROUNDING – If an

outside antenna or cable system is connected
to the video product, be sure the antenna or
cable system is grounded so as to provide
some protection against voltage surges and
built-up static charges. Section 810 of the
National Electrical Code, ANSI/NFPA 70,
provides information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding
conductors, location of antenna-discharge
unit, connection to grounding electrodes, and
requirements for the grounding electrode. See
Figure A.

LIGHTNING – For added protection for the unit

during a lightning storm, unplug it from the
wall outlet and disconnect the cable system
input. This will prevent damage due to
lightning and power-line surges.

OVERLOADING – Do not overload wall outlets

and extension cords as this can result in a risk
of fire or electric shock.

OBJECT AND LIQUID ENTRY – Never push objects

of any kind into this appliance through
openings as they may touch dangerous voltage
points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any
kind on the appliance.

GROUND
CLAMP

ELECTRIC
SERVICE
EQUIPMENT

FIG. A

SERVICING – Do not attempt to service this

appliance yourself as opening or removing
covers may expose you to dangerous
voltage or other hazards. Refer all servicing
to your cable company.

REPLACEMENT PARTS – When replacement

parts are required, be sure the service
technician has used replacement parts
specified by the manufacturer or have the
same characteristics as the original part.
Unauthorized substitutions may result in
fire, electric shock or other hazards.

SAFETY CHECK – Upon completion of any

service or repairs to this appliance, ask the
service technician to perform safety checks
to determine that the appliance is in proper
operating condition.

DAMAGE REQUIRING SERVICE – Unplug this

appliance from the wall outlet and call your
cable company under the following
conditions:

÷ When the power-supply cord or plug is

damaged.

÷ If liquid has been spilled, or objects have

fallen into the appliance.

÷ If the appliance has been exposed to rain or

water.

÷ If the appliance does not operate normally

by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions. Improper
adjustment of other controls may result in
damage and will often require extensive
work by a qualified technician to restore
the appliance to its normal operation.

÷ If the appliance has been dropped or the

cabinet has been damaged.

÷ When the appliance exhibits a distinct

change in performance – this indicates a
need for service.

NEC – NATIONAL ELECTRICAL CODE

ANTENNA
LEAD IN
WIRE

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810 – 20)

GROUNDING CONDUCTORS
(NEC SECTION 810 – 21)

GROUND CLAMPS

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)

NOTE TO CATV SYSTEM INSTALLER:

This reminder is to call the CATV system installer’s attention to Article 820-40 of the NEC that pr
guidelines for proper grounding and, in particular, specifications that the cable grounding shall be co
to the grounding system of the building, as close to the point of cable entry as practical.

3

<BRB1050>