Philips WAS7000 Quick installation guide
REC MARK/UNMARK
DBB
SEARCHCD/MP3-CD HD SOURCE
Wireless Music Station
WAS7000
Connect to your PC
Connect Philips Wireless Music Station to your PC if you want to do
the following:
● Access music files stored on your PC from Philips Music Station’s
UPnP source
SOURCE
● Upgrade firmware of Philips Music Station
To connect to Philips Music Station, your minimum PC requirements must be:
● Windows 2000/XP (Home or Professional)
● Pentium III 500MHz processor or higher
● 256MB RAM
● CD-ROM Drive
● Ethernet Adapter (for wired connection)/ Wireless
● Free hard disk space of 500MB
● Windows Media Player® 9.0 or later installed
UPnP playback
Network Adaptor 802.11 b/g (for wireless connection)
Eng
Set up a wired connection
A1
ETHERNET
Connect the Station to PC directly with the supplied (orange)
Ethernet cable
OR
Connect the Station directly to Access Point with the supplied
(orange) Ethernet cable
LAN
Tips:
● Make sure that Ethernet port on your PC is 'Enabled' to make WADM
connection.
Set up a wireless connection
PC StationAccess Point PC Station
A2
Do you have a wireless Access Point?
YES
On Station :
● Press the MENU button
● Select Settings>Network >
Wireless > (Select desired network) >
(Input the encryption key by
using the 1 way remote control) > Automatic > Apply
Settings > Yes
NO
a. On Station :
● Press SOURCE to enter
UPnP mode
● Press MENU, select
Information >Wireless> SSID
> (write down SSID code)
● Press MENU, select
Information >Wireless> WEB
Key > (write down WEB key)
b. On PC :
● Select Start > Control Panel >
Network Connections >
Enable Wireless Network
Connections > View Available
Wireless Networks > Select
the network that matches
Station's SSID > Input
retrieved Station’s WEP key
Tips:
● Check that PC’s wireless network adaptor is enabled.
● Locate the Station closer to your wireless Access Point.
● Make sure that DHCP is enabled on your wireless Access Point.
If not available, choose Static and key in IP configuration
Loading...