Philips TT 3000 User manual
Register your product and get support at
www.philips.com/welcome
TT3000
2
ENGLISH 6
FRANÇAIS 48
TT3000
6
ENGLISH
Table of contents
Introduction 7
Benefits 8
Intense Pulsed Light (IPL) technology for home
use 8
Effective hair re-growth prevention for everyday
smoothness 9
Gentle treatment 9
Cordless operation for maximum freedom and
flexibility 9
Lamp does not require replacement 9
How Philips’ Intense Pulsed Light technology
works 10
Hair growth 10
Working principle 10
What effect can you expect after treatment? 11
General description 11
Important 12
Danger 12
Warning 12
To prevent damage: 13
Caution 14
Keep the following things in mind to avoid
compromising the lifetime of your Philips Lumea: 14
For whom is Philips Lumea for men not suitable? 14
Contraindictions 15
Electromagnetic fields (EMF) 17
Charging 18
Preparing for use 19
Preparing treatment areas 19
Setting the light intensity 20
Recommended light intensities (1-5) 21
Tanning advice 23
Using the appliance 24
First use and skin test 24
Subsequent use 25
ENGLISH 7
Guidelines for treatment 28
Average treatment time 28
Intended treatment areas 29
Using the appliance on the shoulders, chest, back
and legs 29
How to achieve optimal results 29
Maintenance phase 30
Possible side effects and skin reactions 30
After use 32
Cleaning and maintenance 32
Storage 33
Replacement 34
Replacement parts 34
Environment 34
Removing the rechargeable batteries 35
Guarantee and service 36
Technical specifications 37
Troubleshooting 37
Introduction
Congratulations on your purchase and welcome to
Philips! To fully benefit from the support that Philips
offers, register your product at www.philips.com/
lumeaformen.
Hair removal with light is one of the most
effective methods to get rid of unwanted body hair
with longer-lasting results. It is completely different
from current home hair removal methods and
Philips has been investigating this method together
with leading dermatologists for over 10 years. You
can now use this innovative technology comfortably
in the privacy of your own home, whenever and
wherever you want.
This appliance has been designed and developed
for removing men’s body hair on areas mentioned
below:
ENGLISH8
- arms
- underarms
- pubic area (excluding the scrotum)
- shoulders
- chest
- back
- legs
Do not use the Philips Lumea IPL hair removal system
for men above the neckline, i.e. do not use it on your
face or neck. Do not use the Philips Lumea IPL hair
removal system for men on the scrotum. If you want
to remove hair from the scrotum, use the Bodygroom
included in the package. Please note that the Philips
Lumea for men is designed for use by one person
only. This appliance has been specifically designed for
use by men, but can be used by women as well.
For more information about Philips Lumea for men,
see www.philips.com/lumeaformen. Check our
homepage regularly for updates.
Benefits
This appliance provides the following benefits:
Intense Pulsed Light (IPL) technology for
home use
Philips Lumea for men uses a light-based technology
called ‘Intense Pulsed Light’ (IPL). IPL is also used
in the professional beauty market for hair removal
and has been in use for the last fifteen years. Philips
Lumea for men now brings this innovative
technology to the comfort of your home.
ENGLISH 9
Effective hair re-growth prevention for
everyday smoothness
This method provides you with long-lasting hair
regrowth prevention and smooth skin. Our studies
have shown a significant hair reduction already
after two treatments. Optimal results were
generally achieved after six to seven treatments. A
reduction in hair density is visible from treatment
to treatment. How fast the effect becomes visible
and how long the results last varies from person to
person. For more information, see chapter ‘Using the
appliance’, section ‘How to achieve optimal results’.
Gentle treatment
Philips Lumea for men has been developed in close
cooperation with leading dermatologists for an
effective and gentle treatment.
Cordless operation for maximum freedom
and flexibility
Because the appliance runs on rechargeable
batteries, it is portable and can be used anywhere.
Lamp does not require replacement
Philips Lumea for men is equipped with a highperformance lamp. This lamp can generate over
80,000 flashes and should enable you to continuously
maintain results for more than 5 years* while saving
money on expensive replacement lamps.
*Based on average usage scenario and
recommended treatment regime for one user.
ENGLISH10
1 2 3
How Philips’ Intense Pulsed Light
technology works
Hair growth
Hair growth rates differ from person to person,
depending on age, metabolism and other factors.
However, everyone’s hair normally grows in 3 phases.
1 Growing phase (anagen phase)
The hair grows actively from the root. In this phase
the concentration of melanin is highest. Melanin is
responsible for the pigmentation of the hair. Melanin
concentration is also the determining factor for the
efficacy of this method. Only hairs in the growing
phase are susceptible to treatment with light.
2 Degradation phase (catagen phase)
Hair growth stops and the root shrinks before the
hair sheds.
3 Resting phase (telogen phase)
The old hair separates from its hair follicle and sheds.
The follicle remains at rest until the biological clock
tells it to become active again and grow a new hair.
Working principle
The appliance works by heating up the hair and root
beneath the skin. The melanin in the hair and hair
root absorbs the released light pulses. The darker the
colour of the hair, the more light can be absorbed.
This process stimulates the hair to go into the
resting phase.
The hair now sheds naturally and the hair growth is
inhibited. Hairs can take one or two weeks to shed.
Optimal hair removal cannot be obtained with a
single session, since only hairs in the growing phase
are susceptible to treatment with light. During a
treatment, hairs on the treated area are usually in
different stages of the hair growth cycle. To effectively
ENGLISH 11
treat all hairs you have to repeat the treatment
every two weeks for a few times.
An integrated optical filter ensures that no UV light
reaches the skin and guarantees that the appliance is
safe for the skin.
What effect can you expect after treatment?
- After you have treated the hairs every two weeks
two to four times (depending on your skin/hair
type and the intensity setting), you notice that hair
growth decreases and that the hairs that grow
back are softer.
- After you have treated the hairs six to eight
times (depending on your skin/hair type and the
intensity setting), you notice that most of the hairs
do not return.
- After you have treated the hairs eight times,
continue to use the Lumea for men to maintain
a smooth skin. For more information, see section
‘Maintenance phase’ in chapter ‘Using the
appliance’.
- If you stop using the Lumea for men, the hairs
start to regrow after some time.
General description (Fig. 2)
A Light exit window with integrated UV filter
B Body attachment
C Metallic frame inside the body attachment
D Safety system (safety ring with contact switches)
E Flash button
F Intensity lights (1- 5)
G % Intensity increase button
H ^ Intensity decrease button
I Charging light and battery-low indication
J On/off button
K ’Ready to flash’ light
ENGLISH12
L Appliance socket
M Adapter
N Small plug
O Air vents
Also included: pouch, cleaning cloth and Bodygroom
Important
Read this user manual carefully before you use the
appliance and save it for future reference.
Danger
- Water and electricity are a dangerous
combination. Do not use this appliance in wet
surroundings (e.g. near a bath, a shower or a
swimming pool).
- Keep the appliance and the adapter dry.
- If the appliance is broken, do not touch any inner
part to avoid electric shock.
- Never insert any objects into the appliance.
Warning
- This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
- Children should be supervised to ensure that they
do not play with the appliance.
- The appliance is not intended for children younger
than 15 years. Teenagers aged between 15 and 18
years can use the appliance with the consent and/
or assistance of their parents or the persons who
have parental authority over them. Adults from 19
years and older can use the appliance freely.
ENGLISH 13
- Only charge the appliance with the
adapter supplied.
- Do not use the appliance or the adapter if it is
damaged.
- Do not use the appliance if the light exit window
is broken.
- If the adapter is damaged, always have it replaced
with one of the original type in order to avoid a
hazard.
- The adapter contains a transformer. Do not cut
off the adapter to replace it with another plug, as
this causes a hazardous situation.
To prevent damage:
- Make sure nothing obstructs the air flow through
the ventilation slots.
- Never subject the appliance to heavy shocks and
do not shake or drop it.
- If you take the appliance from a very cold
environment to a very warm environment or vice
versa, wait approximately 3 hours before you use
it.
- Store the appliance in the pouch so that it does
not become dusty.
- Never leave the appliance unattended when it is
switched on. Always switch off the appliance after
use.
- Do not expose the appliance to direct sunlight or
UV light.
- Do not flash against any other surface than the
skin.
ENGLISH14
Caution
- This appliance is only intended for removing
unwanted body hair from areas below the neck.
Do not use it for any other purpose.
- Use this appliance only at settings suitable for
your skin type. Use at higher settings than those
recommended can increase the risk of skin
reactions and side effects.
Keep the following things in mind to avoid
compromising the lifetime of your Philips
Lumea:
- Do not expose the appliance to temperatures
lower than 15°C or higher than 35°C during use.
- The appliance is equipped with a built-in overheat
protection. If the appliance overheats, it does not
flash. Do not switch off the appliance, but let it
cool down for approx. 15 minutes before you
continue with your treatment.
- Always return the appliance to a service centre
authorised by Philips for examination or repair.
Repair by unqualified people could cause an
extremely hazardous situation for the user.
- Never use the appliance in any of the cases
mentioned in the section ‘Contraindications’.
For whom is Philips Lumea for men not
suitable?
Philips Lumea for men is not designed for everyone.
If any of the following is true for you, then this
appliance is not suitable for you to use!
ENGLISH 15
Contraindictions
Never use the appliance if you have an
unsuitable skin and/or hair colour, i.e.:
- If your natural hair colour in the treatment areas is
light blond, white, grey or red.
- If you are of skin type VI (you rarely or never get
sunburnt and you tan very darkly; your skin colour
is brownish black or darker). In this case you run
a high risk of developing skin reactions, such as
strong redness, burns or discolourations, when
you use Philips Lumea.
Never use the appliance if you suffer from
any of the diseases listed below, i.e.:
- If you have a skin disease such as active skin
cancer, if you have a history of skin cancer or any
other localised cancer in the areas to be treated.
- If you have a history of collagen disorder, including
a history of keloid scar formation or a history of
poor wound healing.
- If you have a history of vascular disorder, such as
the presence of varicose veins or vascular ectasia
in the areas to be treated.
- If your skin is sensitive to light and easily develops
a rash or an allergic reaction.
- If you have infections, eczema, burns, inflammation
of hair follicles, open lacerations, abrasions, herpes
simplex, wounds or lesions and haematomas in
the areas to be treated.
- If you have had surgery in the areas to be treated.
- If you have epilepsy with flashlight sensitivity.
- If you have diabetes, lupus er ythematodes,
porphyria or congestive heart disease.
- If you have any bleeding disorder.
- If you have a history of immunosuppressive
disease (including HIV infection or AIDS).
ENGLISH16
Never use the appliance if you take any of
the medications listed below, i.e.:
- If your skin is currently being treated with or has
recently been treated with Alpha-Hydroxy Acids
(AHAs), Beta- Hydroxy Acids (BHAs), topical
isotretinoin and azelaic acid.
- If you have taken any form of isotretinoin
Accutane
This treatment thins the skin and can therefore
make it more susceptible to tears, wounds and
irritations.
- If you are on painkillers, which reduce the skin?s
sensitivity to heat.
- If you are taking photosensitising agents or
medications, check the package insert of your
medicine and never use the appliance if it is stated
that it can cause photo-allergic reactions, phototoxic reactions or if you have to avoid sun when
taking this medicine.
- If you take anticoagulation medications, including
heavy use of aspirin, in a manner which does not
allow for a minimum 1-week washout period
prior to each treatment.
Never use the appliance on the following
areas:
- In the face.
- On the inside of the nostrils and ears.
- On the nipples, areolas and anus.
- If you are a man: on the scrotum.
- If you are a woman: on the labia minora and
vagina. Never use the appliance if you are
pregnant or breast feeding.
- Over or near anything artificial like silicone
implants, pacemakers, subcutaneous injection
ports (insulin dispenser) or piercings.
®
or Roaccutane® in the last six months.
ENGLISH 17
- On moles, freckles, large veins, darker pigmented
areas, scars, skin anomalies without consulting your
doctor. This can result in a burn and a change in
skin colour, which makes it potentially harder to
identify skin-related diseases (e.g. skin cancer).
- On warts, tattoos or permanent make-up. This can
result in a burn and a change in skin colour.
- On areas, where you use long-lasting deodorants.
This can result in skin reactions. See chapter ‘Using
the appliance’, section ‘Possible side effects and
skin reactions’.
Never use the appliance on sunburnt,
recently tanned (last 48 hours) or faketanned skin:
- All types of tanning can influence the safety of
the treatment. This applies to exposure to natural
sunlight as well as artificial tanning methods, such
as tanning lotions, tanning appliances etc. If you
are tanned or are planning to tan, see chapter
‘Preparing for use’, section ‘Tanning advice’.
Note: The list is not exhaustive. If you are not sure
whether you can use the appliance, we advise you
to consult a doctor.
Electromagnetic fields (EMF)
This Philips appliance complies with all standards
regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this
user manual, the appliance is safe to use based on
scientific evidence available today.
ENGLISH18
Charging
Fully charge the batteries before you use the
appliance for the first time and when the batteries
are empty. Fully charging the batteries takes up to 1
hour and 40 minutes.
Charge the appliance when the charging light lights
up orange during use to indicate that the battery is
low. When this happens, the remaining capacity is at
least 30 flashes.
Fully charged batteries provide at least 320 flashes at
light intensity 5.
Fully charge the appliance every 3 to 4 months, even
if you do not use the appliance for a longer time.
Charge the appliance in the following way:
1 Switch off the appliance.
2 Insert the small plug into the appliance and put
the adapter in the wall socket.
, The charging light flashes green to indicate that
the appliance is charging.
, When the batteries are fully charged,
the charging light lights up green continuously.
Notes:
- The adapter feels warm during charging. This is
normal.
- You cannot use the appliance during charging.
- This appliance is equipped with battery overheat
protection and does not charge if the room
temperature exceeds 40°C.
Never cover the appliance and adapter during
charging.
ENGLISH 19
3 After charging, remove the adapter from the
wall socket and pull the small plug out of the
appliance.
Preparing for use
For optimal results and greatest effect, prepare the
areas on which you intend to use the appliance in
the manner described below.
Preparing treatment areas
1 Always shave the areas you intend to treat
before you use the Lumea for men. The Lumea
for men can only be used on a shaved skin.
Note: Philips recommends that you use the Philips
Bodygroom included in the package to preshave
the areas to be treated with the Philips Lumea for
men. Use the Philips Bodygroom dry because the
Philips Lumea for men can only be used on dry
skin.
Note: If your last depilation method involved
removing hairs by the root (e.g epilating, waxing
etc.), wait until you notice significant hair regrowth
before you use Philips Lumea for men.
Note: Do not use depilatory creams instead of
shaving.
Please note that treatment on unshaved or
improperly shaved areas has a number of
undesired effects:
- The light exit window and attachment may
become contaminated with stray hairs and dirt. A
contaminated light exit window and attachment
can reduce the life and efficacy of the appliance.
ENGLISH20
In addition, burns or black spots that appear
on the light exit window and attachment due
to contamination can cause the treatment to
become painful or cause skin reactions like
redness and discolouration.
2 Clean your skin and make sure it is hair-free,
entirely dry and free from oily substances
(e.g. present in cosmetic products like
deodorants, lotions, perfumes, tanning creams
and sunscreens).
3 Check the appliance, especially the light
exit window and the body attachment for
trapped hair, dust and fibres. If you see any
contamination, clean the appliance according
to the instructions in chapter ‘Cleaning and
maintenance’.
Notes:
- If shaving causes wounds or lesions, your skin may
be more sensitive and the light treatment might
feel uncomfortable sometimes.
- Once the hairs stop growing back - which usually
happens after 6-7 treatments - you no longer have
to shave before you use the appliance.
Setting the light intensity
Philips Lumea for men is an appliance developed
for home use and therefore not comparable with
professional light-based appliances with respect
to pain sensation. Pulses of light delivered by
Philips Lumea for men are gentler than those from
professional appliances and therefore you can expect
a convenient and effective treatment.
Adjust the light intensity to your skin and body hair
colour and to a level you find comfortable.
ENGLISH 21
The table with recommended light intensities below
helps you to establish the right light intensity.
1 Consult the table below to determine which
light intensities are most suitable for your
skin and body hair colour and to check if this
method is suitable for you (if it is not, this is
indicated with x in the table).
2 Each body area and possibly even parts of a
body area may require a separate appropriate
light intensity according to the recommended
light intensities table below. The method
is more effective at higher intensities, but
you should reduce the light intensity if you
experience any pain or discomfort.
Persons with darker skin run a higher risk of skin
irritation because their skin absorbs more light.
Therefore lower intensities are recommended for
persons with darker skin.
The light intensity you use can feel warm or hot
on the skin, but should never feel uncomfortable.
To prevent skin reactions, see chapter ‘Using the
appliance’, section ‘Possible side effects and skin
reactions’.
Recommended light intensities (1-5)
In the table below, ‘x’means that the appliance is not
suitable for you.
ENGLISH22
Skin colour
& characteristics:
hair colour:
dark
blond/light
brown/
brown/dark
brown/
black
hair colour:
white/grey/
red/light
blond
Light
White
(always
sunburn,
no tanning)
4/5 4/5 4/5 3/4 1/2/3 x
x x x x x x
Beige
brown
(easy
(some-
sun-
times
burn,
sun-
mini-
burn,
mal
good
tan-
tan-
ning)
ning)
Important:
To check whether Philips Lumea for men is suitable
for you, see section ‘For whom is Philips Lumea for
men not suitable?’.
If your skin has been exposed to natural sunlight or
an artificial tanning method, it may be darker than
during the previous treatment. Check the table
above to determine which settings are suitable for
your skin colour.If your skin has been exposed to
natural sunlight or an artificial tanning method, it may
be darker than during the previous treatment. Check
the table above to determine which settings are
suitable for your skin colour.
Mid
brown
(rarely
sunburn,
fast
and
good
tanning)
Dark
brown
(rarely
sunburn,
very
good
tanning)
Black
(rarely
to
never
sunburn,
very
dark
tanning)
ENGLISH 23
Tanning advice
Sun exposure before treatment
- Wait at least 48 hours after sunbathing before you
use the appliance. Sunbathing can cause skin to
darken (tan) and/or can cause sunburn (reddening
of the skin).
- After these 48 hours, check the skin for any
remaining sunburn. Do not use Philips Lumea for
men as long as sunburn persists.
- When the sunburn has disappeared, perform a
skin test (see chapter ‘Using the appliance’, section
‘First use and skin test’) on the area to be treated
to determine the appropriate light intensity.
- If your skin is tanned, perform a skin test (see
chapter ‘Using the appliance’, section ‘First use and
skin test’) on the area to be treated and select
the appropriate light intensity. A failure to do so
causes a risk of developing skin reactions after
treatment with Philips Lumea for men.
Sun exposure after treatment
- Wait at least 24 hours after treatment before you
expose treated areas to the sun. Even after 24
hours, make sure that the treated skin does not
show any redness from the treatment anymore
before you expose it to the sun.
- Cover treated areas when you go out in the sun
or use a sun block (SPF 30+) in the two weeks
after the treatment.
- Exposing treated areas to the sun immediately
after treatment without protection can increase
the risk of adverse side effects and skin reactions.
See chapter ‘Using the appliance’, section ‘Possible
side effects and skin reactions’.
ENGLISH24
Tanning with artificial light
- Follow the instructions in ‘Sun exposure before
treatment’ and ‘Sun exposure after treatment’
above.
Tanning with creams
- If you have used artificial tanning lotion, wait until
the artificial tan has fully disappeared before you
use Philips Lumea for men.
Using the appliance
If the treatment becomes intolerably painful at
any point in time, reduce the light intensity setting
until the treatment is comfortable again. If you
notice skin reactions stronger than slight redness,
stop the treatment immediately and read section
‘Possible side effects and skin reactions’ in this
chapter.
First use and skin test
When you use the appliance for the first time,
we advise you to perform a skin test on the area
to be treated to check your skin’s reaction to the
treatment and to get accustomed to light-based
treatment.
1 Choose an area close to the intended
treatment area.
2 Press the on/off button to switch on the
appliance.
, Intensity light 1 goes on automatically to indicate
that the appliance is switched on at default
intensity 1.
ENGLISH 25
3 Apply one flash at the lowest recommended
intensity for your skin type.
4 As long as it feels comfortable (not painful),
increase the setting by one level within the
recommended range for your skin type and
apply one flash for each setting. Do not apply
more than one flash on the same spot.
5 After the skin test, wait for 24 hours and
check your skin for any reaction. If the skin
shows reactions, choose the highest setting
that did not result in any skin reaction for
subsequent use.
Subsequent use
1 Before every treatment, clean the body
attachment, light exit window and
metallic frame of Philips Lumea for men.
2 Press the on/off button to switch on the
appliance.
, Intensity light 1 goes on automatically to indicate
that the appliance is switched on at default
intensity 1.
Note: It is normal that the appliance and the
attachment become warm during use.
3 Start each treatment by selecting the light
intensity very carefully, based on your skin’s
sensitivity and on how comfortable the
treatment feels.
Your skin may react differently on different days/
occasions for a number of reasons. See section
‘Possible side effects and skin reactions’ in this
chapter for more information.
ENGLISH26
4 Press the % button to increase the intensity.
To lower the intensity, press the ^ button.
, Every time you press the button, the
corresponding intensity light starts to flash.
This takes a few seconds.
5 Place the appliance at a 90° angle on the skin
so that the body attachment and the safety ring
are in contact with the skin.
Note: It may be difficult to have the safety ring
make proper contact with the skin on certain
areas. In that case, you could hold the Lumea for
men upside down, while you press the flash button
with your thumb.
6 Press the safety ring fully onto the skin with
slight pressure.
, The ‘ready to flash’ light on the back of the
appliance lights up green when all contact
switches of the safety ring are in contact with
the skin and the appliance is charged.
Note: The safety ring has contact switches that
together are the safety system of the appliance.
This safety ring prevents unintentional flashing
without skin contact.
Tip: For easier use, stretch the skin you want to treat.
On areas with softer skin, you may need to exert
ENGLISH 27
more pressure on the appliance to push in all contact
switches.
Note: Bony areas like shinbone, ankles or ribs are
more sensitive than other areas of the body. When
you press the appliance hard onto these areas, the
skin can be more susceptible to skin reactions like
irritation and redness. See section ‘Possible side
effects and skin reactions’ in this chapter. Press the
appliance onto the skin just hard enough to make
the ‘ready to flash’ light go on, but no harder.
7 Press the flash button to release a flash. After
the appliance has flashed once, release the flash
button.
Note: The visible light produced by the appliance
is the reflection of the flash on the skin and
is harmless to your eyes. It is not necessary to
wear goggles during use.
8 Let go of the flash button after the appliance
has flashed. For the next flash, repeat steps 5
to 8. After each flash it takes up to 3.5 seconds
until the appliance is ready to flash again.
Do not treat exactly the same area multiple times
during one session. This does not improve the
effectiveness of the treatment, but increases the
risk of skin reactions.
9 To avoid untreated areas, always make
sure there is some overlap with the previously
treated area when you place the appliance on
the skin.The effective light only comes out of
the light exit window with integrated UV filter.
Make sure the flashes are produced close to
each other. Ask somebody else to help you
ENGLISH28
with the treatment if you want to treat your
back to ensure that the treated areas overlap.
10 Switch off the appliance after you have finished
the treatment.
11 Check the body attachment and light exit
window for hairs and dirt and clean the
appliance after use. See chapter ‘Cleaning and
maintenance’.
Guidelines for treatment
Average treatment time
Area Approx. treatment time
Underarms 2-5 minutes
Entire pubic area (excluding
scrotum)
Shoulders 10-15 minutes
Chest up to 30 minutes, depending on size
Back up to 30 minutes, depending on size
One lower leg 10-15 minutes
One full leg up to 25 minutes
2-5 minutes
of hairy area
of hairy area
Note: The average treatment times above have
been observed during research and tests. Individual
treatment times may vary from person to person.
Note: Fully charged batteries offer at least 320
flashes at intensity 5. How long you can use the
ENGLISH 29
appliance depends on the size of the area to be
treated and the intensity setting used.
Intended treatment areas
The appliance is intended to treat unwanted hairs
on the underarms, shoulders, back, chest, arms, pubic
area (excluding the scrotum) and legs.
Using the appliance on the shoulders, chest,
back and legs
If you use the appliance to treat your shoulders,
chest, back and legs you may have to recharge the
appliance during the treatment. This is normal. How
long you can use the appliance depends on the size
of the treatment area and the intensity setting used.
Tip: If you want to treat your back and your shoulders,
you require the help of your partner or a friend to
guarantee complete coverage and best results.
Tip: The back and chest are often tanned. Take special
care to select the appropriate intensity for treating the
tanned skin to prevent skin reactions.
How to achieve optimal results
- It is normal that hairs are still visible after the first
few treatments (see chapter ‘Introduction’, section
‘Working principle’ for more information).
- To remove all hairs successfully and prevent
the hair follicle from becoming active again, the
treatments have to be repeated once every two
weeks for the first two to three months. Your skin
should be smooth and hair-free by then. Please
Loading...