Wireless Speaker
4000 Series
S4807
User manual
Register your product and get support at：
www.philips.com/support
Contents
1 Important 2
Safety 2
2 Your wireless speaker 3
Introduction 3
What's in the box 3
Overview of the speaker 3
3 Get started 4
Charge the built-in battery 4
4 Play from Bluetooth devices 5
Play from Bluetooth devices 5
Multi-point connection 5
Control playback
Control phone call
Trigger voice assistant of
your mobile device
Pairing for stereo mode
4
6
6
6
6
5 Product information 7
6 Troubleshooting 7
General 7
Bluetooth 8
7 Notice 8
Compliance 8
Care of the environment 8
FCC and IC statement 9
Trademark notice 10
EN 1
1 Important
Safety
Important safety instructions
• Make sure that the power supply
voltage corresponds to the voltage
on the back or the underside of
the unit.
• The speaker shall not be exposed
to dripping or splashing.
• Do not place any source of danger
on the speaker (e.g. liquid lled
objects, lit candles).
• Make sure that there is enough free
space around the speaker for
ventilation.
• Please use the speaker safely in an
environment with temperature
between 0℃ and 45℃.
• Only use attachments and accessories
specied by the manufacturer.
• Disposing a battery into re or a
hot oven, mechanically crushing
or cutting a battery can result in
an explosion.
• Leaving a battery in an extremely
high temperature surrounding, or
an extremely low air pressure
environment may result in an
explosion or leakage of ammable
liquid or gas.
Warning
• Never remove the casing of this speaker.
• Never lubricate any part of this speaker.
• Place this speaker on a at, hard and
stable surface.
• Never place this speaker on other
electrical equipment.
• Only use this speaker indoors. Keep this
speaker away from water, moisture and
liquid-lled objects.
• Keep this speaker away from direct
sunlight, naked ames or heat.
• Risk of explosion if a battery is replaced
by an incorrect type.
Battery safety precautions
• Danger of explosion if a battery is
incorrectly replaced. Replace only
with the same or equivalent type.
• A battery (battery pack or battery
installed) shall not be exposed to
excessive heat such as sunshine,
re or the like.
• A battery in extreme high or low
temperatures during use, storage or
transportation, and low air pressure at
high altitude can pose safety hazards.
• Do not replace a battery with an
incorrect type that can defeat a
safeguard (for example, some lithium
battery types).
EN2
2 Your wireless
speaker
Congratulations on your purchase, and
welcome to philips! To fully benet
from the support that philips oers,
register your product at
www.philips.com/support.
What's in the box
1
•
Turn the speaker on or o.
2
• Press and hold to enter stereo
pairing mode.
3
• Enter Bluetooth pairing mode.
• Clear Bluetooth pairing
information.
Check and identify the contents of your
package:
• Speaker
• USB cable
• Quick start guide
• Safety sheet
• Worldwide warranty
• Lanyard
Overview of the speaker
9 568
7
1324
4
• In Bluetooth mode, press to
pause or resume play.
• Respond to an incoming call
through Bluetooth connection.
• Press and hold to trigger voice
assistant of your mobile device.
Power/Bluetooth LED indicator
5
• Power/Bluetooth light.
6 Microphone
7
• Increase volume.
8
• Decrease volume.
Battery level indicators
9
• Show the charging progress.
• Show the battery level: To check
battery status, press any other
keys but not , as will trigger
the power o.
DC IN
10
10
• Charge the built-in battery.
EN 3
Loading...