Read your User’s Manual rst for quick tips that make using
your Philips product more enjoyable.
If you have read your instructions and still need assistance,
you may access our online help at www.philips.com/welcome
DVP3136DVD VIDEO PLAYER
dvp3136_94_eng 4.indd 1dvp3136_94_eng 4.indd 12007-06-05 9:58:10 AM2007-06-05 9:58:10 AM
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
2
dvp3136_94_eng 4.indd 2dvp3136_94_eng 4.indd 22007-06-05 9:58:17 AM2007-06-05 9:58:17 AM
Index
English ------------------------------------------6
English
3
dvp3136_94_eng 4.indd 3dvp3136_94_eng 4.indd 32007-06-05 9:58:18 AM2007-06-05 9:58:18 AM
General Information
Environmental Information
All unnecessary packaging has been
omitted. The packaging has been made
easy to separate into two materials;
cardboard (box) and polyethylene (bags,
protective foam sheet).
Your DVD player consists of materials
which can be recycled and reused if
disassembled by a specialised company.
Please observe the local regulations
regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Manufactured under license from
Dolby Laboratories, Dolby
and the double-D symbol are
trademarks of Dolby Laboratories.
Windows Media and the Windows logo
are trademarks, or registered
trademarks of Microsoft Corporation
in the United States and/or other
countries.
Laser Safety
This unit employs a laser. Due to possible
eye injury, only a quali ed service person
should remove the cover or attempt to
service this device.
NOTE:
Pictures shown maybe different
between countries.
CAUTION:
WARNING LOCATION: ON THE
BACKPLATE OF THE SET
NEVER MAKE OR CHANGE
CONNECTIONS WITH THE
POWER SWITCHED ON.
Speci cations are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners.
For Customer Use:
Read carefully the information located at
the bottom or rear of your DVD Video
player and enter below the Serial No.
Retain this information for future
reference.
Model No. DVP 3136
Serial No. ___________________
LASER
Type Semiconductor laser
InGaAlP (DVD)
AIGaAs (CD)
Wave length 658 nm (DVD)
790 nm (CD)
Output Power 7.0 mW (DVD)
10.0 mW (VCD/CD)
Beam divergence 60 degrees
4
dvp3136_94_eng 4.indd 4dvp3136_94_eng 4.indd 42007-06-05 9:58:18 AM2007-06-05 9:58:18 AM
Language Code
5
dvp3136_94_eng 4.indd 5dvp3136_94_eng 4.indd 52007-06-05 9:58:18 AM2007-06-05 9:58:18 AM
Region codes ...............................................................................................................................................9
Connections
Connecting to television .......................................................................................... 10-11
Using Composite Video jacks (CVBS) .............................................................................................. 10
Using Component Video jacks ( YPbPr) ........................................................................................... 10
Using an accessory RF modulator ......................................................................................................11
Connecting the power cord ...........................................................................................12
Optional connections
Connecting to a stereo system .....................................................................................13
Stereo system has right/ left Audio In jacks ...................................................................................13
Connecting to a digital AV receiver .............................................................................13
Receiver has a PCM, Dolby Digital or MPEG decoder ................................................................ 13
Connecting to an Multi- Channel Receiver .................................................................14
Receiver has a Dolby Digital decoder .........................................................................................................14
Connecting to Speaker ..................................................................................................14
Receiver as +RCH- and +LCH-Audio In Jacks ............................................................................... 14
Product Overview
Front and Rear Panels ................................................................................................... 15
Remote Control ..............................................................................................................16
Operations for video playback ..................................................................................... 23
Using the Disc Menu ............................................................................................................................. 23
Zooming in ............................................................................................................................................... 23
Resuming playback from the last stopped point ............................................................................ 23
Time Search .............................................................................................................................................25
Special DVD Features ................................................................................................... 26
Playing a Title ........................................................................................................................................... 26
Changing the Audio Language ............................................................................................................. 26
Playback with multi-angles (JPEG) .....................................................................................................28
DVD Menu Options
Using the Language setup menu ................................................................................. 29
OSD Language ......................................................................................................................................... 29
Subtitle/Audio/DVD Menu ................................................................................................................... 29
Using the Video setup menu ...................................................................................30 -32
Setting the Aspect Ratio ...................................................................................................................... 30
TV System ................................................................................................................................................ 31
Video Out ................................................................................................................................................. 31
Using the Audio setup menu ................................................................................... 33-35
Front / Center / Surround Speakers ................................................................................................. 33
Subwoofe r ................................................................................................................................................34
Digital Output ......................................................................................................................................... 34
Night Mode ..............................................................................................................................................35
Down Sampling ....................................................................................................................................... 35
Changing the Password ......................................................................................................................... 37
Using the Misc (Miscellaneous) setup menu .........................................................38-39
Restoring to the original settings ....................................................................................................... 38
Volume Control ...................................................................................................................................... 39
dvp3136_94_eng 4.indd 7dvp3136_94_eng 4.indd 72007-06-05 9:58:19 AM2007-06-05 9:58:19 AM
Care and Safety Information
English
DANGER!
High voltage! Do not open the
device. You run the risk of getting
an electric shock.
The machine does not contain any
user-serviceable parts. Please leave
all maintenance work to quali ed
personnel.
Setup
Finding a suitable location
– Place the set on a at, hard and stable
surface. Do not place the set on a
carpet.
– Do not put any equipment or heavy
objects on top of the set.
– Do not position the set on top of
other equipment that might heat it up
(such as receiver or ampli er).
Do not put anything under the set
–
(such as CDs, magazines).
– Install this unit near the AC outlet and
where the AC power plug can be
reached easily.
Space for ventilation
– Place the apparatus in a location with
adequate ventilation to prevent
internal heat build up. Allow at least
10 cm (4.0”) clearance from the rear
and the top of the set and 5cm (2.0”)
from the left and right to prevent
overheating.
5cm (2.0")
10cm (4.0")
10cm (4.0")
Cleaning discs
Some problems occur because the disc
inside the player is dirty (frozen picture,
sound disruptions, picture distortions).
To avoid these problems, discs should be
cleaned on a regular basis.
To clean a disc, use a micro bre cleaning
cloth and wipe the disc from the center
to the edge in a straight line.
CAUTION!
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or anti-static sprays intended for analog
discs. Since the optical unit (laser) of the
DVD player operates at a higher power
than regular DVD or CD players,
cleaning CDs intended for DVD or CD
players may damage the optical unit
(laser). Therefore, refrain from using a
cleaning CD.
5cm (2.0")
Avoid high temperatures, moisture,
water and dust
– Apparatus shall not be exposed to
dripping or splashing.
– Do not place any sources of danger
on the apparatus (such as liquid lled
objects, lighted candles).
8
dvp3136_94_eng 4.indd 8dvp3136_94_eng 4.indd 82007-06-05 9:58:19 AM2007-06-05 9:58:19 AM
General Information
ALL
4
ALL
ALL
5
6
ALL
1
ALL
ALL
2
3
Accessories supplied
Composite
video cable
(yellow) and
Audio cables
(white, red)
DISC
MENU
Remote
control and
two AAA
batteries
RETURN
TITLE
PREV
PLAY/PAUSE
STOP
SUBTITLE
ZOOM
Region codes
This DVD player is designed to support
the Region Management System. Check
the regional code number on the disc
package. If the number does not match
the player’s region number (see table
below), the player may be unable to
playback the disc.
Tips:
– It may not be possible to play CD-R/RW
or DVD±R/RW in all cases due to the type
of disc or condition of the recording.
– If you are having trouble playing a certain
disc, remove the disc and try a different one.
Improper formatted disc will not played on
this DVD player.
DISPLAY
Region
SETUP
NEXT
MUTE
AUDIO
U.S.A. and
Canada regions
U.K and
Europe regions
Discs that can
be played
English
Asia Paci c,
Taiwan, Korea
Australia,
New Zealand,
Latin America
Russia and
India regions
China, Calcos Islands,
Walls and Futuna
Islands
9
dvp3136_94_eng 4.indd 9dvp3136_94_eng 4.indd 92007-06-05 9:58:19 AM2007-06-05 9:58:19 AM
Connections
English
Connecting to television
COMPONENT
VIDEO IN
S-VIDEO
IN
V (Pr/Cr)
AUDIO
OUT
U (Pb/Cb)
VIDEO IN
Y
2
1
DIGITAL
FRONT L
REAR L
CENTER
SUBWOOFER
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your television.
– Connect the DVD player directly
to the television.
Using Composite Video jacks
(CVBS)
A
Use the composite video cable (yellow)
to connect the DVD player’s TV OUT
(CVBS) jack to the video input jack (or
labeled as A/V In, Video In, Composite or
Baseband) on the television (cable
supplied).
B To hear sound of this DVD player
through your television, use the audio
cables (white/red) to connect FRONT
(L/R) AUDIO OUT jacks of the DVD
player to the corresponding AUDIO IN
jacks on the television (cable supplied).
REAR R
AUDIO OUT
OUT
FRONT R
COAXIAL
AUDIO
IN
TV OUT
COMPONENT VIDEO OUT
S-VIDEO
VIDEO IN
OUT
AUDIO
IN
TV OUT
COMPONENT VIDEO OUT
S-VIDEO
VIDEO IN
COMPONENT
VIDEO IN
IN
V (Pr/Cr)
U (Pb/Cb)
Y
1
COMPONENT
VIDEO IN
IN
V (Pr/Cr)
U (Pb/Cb)
Y
COMPONENT
VIDEO IN
S-VIDEO
IN
V (Pr/Cr)
AUDIO
OUT
U (Pb/Cb)
VIDEO IN
Y
2
DIGITAL
REAR L
FRONT L
CENTER
REAR R
FRONT R
SUBWOOFER
AUDIO OUT
COAXIAL
IMPORTANT!
– The progressive scan video quality
is only possible when using YPbPr
and a progressive scan television is
required.
Using Component Video jacks
(YPbPr)
A
Use the component video cables (red/
blue/green) to connect the DVD player’s
YPbPr jacks to the component video
input jacks (or labeled as YPbPr) on the
television (cable not supplied).
B To hear sound of this DVD player
through your television, use the audio
cables (white/red) to connect FRONT
(L/R) AUDIO OUT jacks of the DVD
player to the corresponding AUDIO IN
jacks on the television (cable supplied).
C Proceed to page 18 for detailed
progressive scan setup.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
10
dvp3136_94_eng 4.indd 10dvp3136_94_eng 4.indd 102007-06-05 9:58:20 AM2007-06-05 9:58:20 AM
O
Connections (continued)
English
RF coaxial cable to TV
2
Back of RF Modulator
ANT IN
(example only)
AUDIO IN
TO TVANT IN
DIGITAL
COAXIAL
OUT
3
TV OUT
COMPONENT VIDEO OUT
4
L
FRONT L
R
FRONT R
OUT
R L
VIDEO
IN
CH3 CH4
ANT IN
1
IMPORTANT!
– If your television only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the
DVD playback on the television. See
your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
Using an accessory RF modulator
Use the composite video cable (yellow)
A
to connect the DVD player’s TV OUT
(CVBS) jack to the video input jack on
the RF modulator.
B Use the RF coaxial cable (not supplied) to
connect ANTENNA OUT or TO TV jack
on the RF modulator to the ANTENNA
IN jack on the television.
C To hear sound of this DVD player
through your TV, use the audio cables
(white/red) to connect FRONT (L/R)
AUDIO OUT jacks of the DVD player to
the corresponding AUDIO IN jacks on
the RF modulator (cable supplied).
D Connect the Antenna or Cable TV
service signal to the ANTENNA IN or
RF IN jack on the RF modulator. (It may
have been connected to your TV
previously. Disconnect it from the TV).
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
11
dvp3136_94_eng 4.indd 11dvp3136_94_eng 4.indd 112007-06-05 9:58:20 AM2007-06-05 9:58:20 AM
Connections (continued)
E
English
Connecting the power cord
DIGITAL
COAXIAL
TV OUT
OUT
COMPON
FRONT L
REAR L
CENTER
FRONT R
REAR R
SUBWOOFER
AUDIO OUT
After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
When no disc is loaded, press
STANDBY ON on the DVD player
front panel.
“– – –” may appear on the display
panel.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
12
dvp3136_94_eng 4.indd 12dvp3136_94_eng 4.indd 122007-06-05 9:58:20 AM2007-06-05 9:58:20 AM
Optional connections
Connecting to a stereo
system
STEREO
AUDIO
IN
DIGITAL
DIGITAL
REAR L
CENTER
REAR R
SUBWOOFER
AUDIO OUT
Stereo system has right/ left Audio
In jacks
A
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
B Use the audio cables (white/red) to
connect FRONT (L/R) AUDIO OUT
jacks of the DVD Player to the
corresponding AUDIO IN jacks on the
stereo system (cable supplied).
TV OUT
FRONT L
OUT
FRONT R
COAXIAL
COMPONENT VIDEO OUT
Connecting to a digital AV
receiver
AV Receiver
REAR L
FRONT L
CENTER
REAR R
FRONT R
SUBWOOFER
AUDIO OUT
Receiver has a PCM, Dolby Digital
or MPEG decoder
A
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
B Connect the COAXIAL jack of the DVD
player to the corresponding Digital Audio
In jack on your receiver (cable not
supplied).
C Set the DVD player’s digital output to
PCM-Only or ALL depending on the
capabilities of your receiver (see page 34
{Digital Output}).
DIGITAL
COAXIAL
OUT
TV OUT
COMPONENT VIDEO OUT
AUDIO
IN
DIGITAL
English
Tip:
– If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
13
dvp3136_94_eng 4.indd 13dvp3136_94_eng 4.indd 132007-06-05 9:58:20 AM2007-06-05 9:58:20 AM
Optional connections (continued)
English
Connecting to an MultiChannel Receiver
AV Receiver
Receiver has a Dolby Digital
decoder
A
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
B Connect the Audio Out Left and Right
jack for Front and Rear speakers to the
corresponding input jacks on your
receiver (cable not supplied).
C Connect the Audio Out for Center
speaker and Subwoofer to the
corresponding inputs on your receiver
(cable not supplied).
MULTICHANNEL AUDIO IN
RR
LL
Connecting to Speaker
REARFRONT
SUBW.
CENTER
REARFRONT
+ RCH --LCH +
SPEAKER
Receiver as +RCH- and +LCHAudio In Jacks
A
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
B Connect the “+RCH-” and “-LCH+” to
the corresponding inputs on your
speaker. (speakers not supplied).
Tip:
– 6 Ω and 8 Ω is advised to be the input
impedance of the connecting speakers.
– To have better audio effect from the
speakers, set ‘Audio output’ to ‘Stereo’.
– Connecting the speaker wire with improper
polarity might result in distorted sound/low
quality sound.
– Shorting the speaker terminals might result
in the damage of the main unit and will
make the warranty void.
– Placing the speakers too close to your TV
might distort the image on the TV.
14
dvp3136_94_eng 4.indd 14dvp3136_94_eng 4.indd 142007-06-05 9:58:21 AM2007-06-05 9:58:21 AM
Loading...
+ 32 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.