Philips SE 7450 User Manual
Register your product and get support at
www.philips.com/welcome
SE 7450
EN Telephone Answering Machine
Warning
Use only rechargeable batteries.
Charge the handset for 24 hours before use.
Table of contents
1 Safety information 3
4Your phone 11
1.1 Equipment Approval
Information 3
1.2 Interference Information 4
1.3 Hearing Aid Compatibility
(HAC) 5
1.4 FCC RF Radiation Exposure
Statement 5
2Important 6
2.1 Power requirements 6
2.2 Conformity 7
2.3 Electric, Magnetic and
Electromagnetic Fields ("EMF") 7
2.4 Recycle your batteries 8
2.5 Service Centers 8
3 Configure your SE7450 9
3.1 Install battery 9
3.2 Change the Display Language 9
3.3 Registration 9
4.1 What’s in the box 11
4.2 Overview of your phone 12
5 Getting started 15
5.1 Install your phone 15
6 Use more of your phone 16
6.1 Using the Intercom 16
7 Personal settings 18
7.1 Handset Tones 18
7.2 Set Wallpaper 19
7.3 Set Contrast Level 19
7.4 Change the Handset Name 19
7.5 Change the Display Language 19
7.6 Babysit mode 20
7.7 Set Backlight time 20
7.8 Set Theme Colour 20
Table of contents 1
8 Advanced settings 21
8.1 Registration 21
8.2 Unregister a handset 21
9 Games 22
9.1 Play Snake game 22
9.2 Play Tetris game 22
10 Technical data 23
11 Frequently asked
questions 24
12 Index 27
2Table of contents
1 Safety information
1.1 Equipment Approval Information
Your telephone equipment is approved
for connection to the Public Switched
Telephone Network and is in compliance
with parts 15 and 68, FCC Rules and
Regulations and the Technical
Requirements for Telephone Terminal
Equipment published by ACTA.
1.1.1 Notification to the Local
Telephone Company
On the bottom of this equipment is a
label indicating, among other information,
the US number and Ringer Equivalence
Number (REN) for the equipment. You
must, upon request, provide this
information to your telephone company.
The REN is useful in determining the
number of devices you may connect to
your telephone line and still have all of
these devices ring when your telephone
number is called. In most (but not all)
areas, the sum of the RENs of all devices
connected to one line should not exceed
5. To be certain of the number of devices
you may connect to your line as
determined by the REN, you should
contact your local telephone company.
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
applicable FCC Part 68 rules and
requirements adopted by the ACTA. A
compliant telephone cord and modular
plug is provided with this product. It is
designed to be connected to a compatible
modular jack that is also compliant. See
installation instructions for details.
Notes
• This equipment may not be used on
coin service provided by the telephone
company.
• Party lines are subject to state tariffs,
and therefore, you may not be able to
use your own telephone equipment if
you are on a party line. Check with
your local telephone company.
• Notice must be given to the telephone
company upon permanent
disconnection of your telephone from
your line.
• If your home has specially wired alarm
equipment connected to the
telephone line, ensure the installation
of this product does not disable your
alarm equipment. If you have questions
about what will disable alarm
equipment, consult your telephone
company or a qualified installer.
US Number is located on the cabinet
bottom.
REN Number is located on the cabinet
bottom.
1.1.2 Rights of the Telephone
Company
Should your equipment cause trouble on
your line which may harm the telephone
network, the telephone company shall,
Safety information 3
where practicable, notify you that
temporary discontinuance of service may
be required. Where prior notice is not
practicable and the circumstances
warrant such action, the telephone
company may temporarily discontinue
service immediately. In case of such
temporary discontinuance, the telephone
company must: (1) promptly notify you of
such temporary discontinuance; (2) afford
you the opportunity to correct the
situation; and (3) inform you of your right
to bring a complaint to the Commission
pursuant to procedures set forth in
Subpart E of Part 68, FCC Rules and
Regulations.
The telephone company may make
changes in its communications facilities,
equipment, operations or procedures
where such action is required in the
operation of its business and not
inconsistent with FCC Rules and
Regulations. If these changes are
expected to affect the use or
performance of your telephone
equipment, the telephone company must
give you adequate notice, in writing, to
allow you to maintain uninterrupted
service.
1.2 Interference Information
This equipment generates and uses radio
frequency energy which may interfere
with residential radio and television
reception if not properly installed and
used in accordance with instructions
contained in this manual. Reasonable
protection against such interference is
ensured, although there is no guarantee
this will not occur in a given installation. If
interference is suspected and verified by
switching this equipment on and off, the
user is encouraged to try to correct the
interference by one or more of the
following measures: Reorient the radio/
television receiver’s antenna, relocate
the equipment with respect to the
receiver, plug the equipment and receiver
into separate circuit outlets. The user
may also wish to consult a qualified radio/
television technician for additional
suggestions. This equipment has been
fully tested and complies with all limits for
Class B computing devices pursuant to
part 15 FCC Rules and Regulations. This
device complies with RSS-210 of Industry
Canada. Operation is subject to the
following two conditions: (1) This device
may not cause interference, and (2) This
device must accept any interference,
including interference that may cause
undesired operation of the device.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference; and (2) This device must
accept any interference received,
including interference that may cause
undesired operation.
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference in
a residential installation.
4 Safety information
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation.
Privacy of Communications may not be
ensured when using this product.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving
antenna (that is, the antenna for radio
or television that is “receiving” the
interference).
• Reorient or relocate and increase the
separation between the
telecommunications equipment and
receiving antenna.
• Connect the telecommunications
equipment into an outlet on a circuit
different from that to which the
receiving antenna is connected.
If these measures do not eliminate the
interference, please consult your dealer
or an experienced radio/television
technician for additional suggestions.
Also, the Federal Communications
Commission has prepared a helpful
booklet, “How To Identify and Resolve
Radio/TV Interference Problems.” This
booklet is available from the U.S.
Government Printing Office, Washington,
D.C. 20402. Please specify stock number
004-000-00345-4 when ordering copies.
Notice: The changes or modifications not
expressly approved by the party
responsible for compliance could void the
user's authority to operate the
equipment.
1.3 Hearing Aid Compatibility (HAC)
This telephone system meets FCC/
Industry Canada standards for Hearing
Aid Compatibility.
1.4 FCC RF Radiation Exposure Statement
This equipment complies with FCC RF
radiation exposure limits set forth for an
uncontrolled environment. This
equipment should be installed and
operated with a minimum distance of 20
centimeters between the radiator and
your body. This transmitter must not be
co-located or operated in conjunction
with any other antenna or transmitter.
For body worn operation, this phone has
been tested and meets the FCC RF
exposure guidelines when used with the
belt clip supplied with this product. Use of
other accessories may not ensure
compliance with FCC RF exposure
guidelines.
Safety information 5
NOTES: This equipment may not be used
2Important
Take time to read this user manual before
you use your phone. It contains important
information and notes regarding your
phone.
NOTICE: This product meets the
applicable Industry Canada technical
specifications.
The equipment must be installed using an
acceptable method of connection. The
customer should be aware that
compliance with the above conditions
may not prevent degradation of service in
some situations.
Repairs to certified equipment should be
made by an authorized Canadian
maintenance facility designated by the
supplier. Any repairs or alterations made
by the user to this equipment, or
equipment malfunctions, may give the
telecommunications company cause to
request the user to disconnect the
equipment.
Users should ensure for their own
protection that the electrical ground
connections of the power utility,
telephone lines and internal metallic
water pipe systems, if present, are
connected together. This precaution may
be particularly important in rural areas.
CAUTION: Users should not attempt to
make such connections themselves, but
should contact the appropriate electric
inspection authority, or electrician, as
appropriate.
6Important
on coin service provided by the
telephone company.
2.1 Power requirements
• This product requires an electrical
supply of 220-240 volts AC. In case of
power failure, the communication can
be lost.
• The Electrical network is classified as
hazardous. The only way to power
down the charger is to unplug the
power supply from the electrical
outlet. Ensure that the electrical outlet
is always easily accessible.
• The voltage on the network is
classified as TNV-3
(Telecommunication Network
Voltages), as defined in the standard
UL 60950.
Warning
To avoid damage or malfunction:
• Do not allow the charging contacts or
the battery to come into contact with
metal objects.
• Do not open it as you could be
exposed to high voltages.
• Do not allow the charger to come into
contact with liquids.
• Never use any other battery than the
one delivered with the product or
recommended by Philips: risk of
explosion.
• Always use the cables provided with
the product.
• Handsfree activation could suddenly
increase the volume in the earpiece to
a very high level: make sure the
handset is not too close to your ear.
• This equipment is not designed to
make emergency calls when the power
fails. An alternative has to be made
available to allow emergency calls.
• Do not expose the phone to excessive
heat caused by heating equipment or
direct sunlight.
• Do not drop your phone or allow
objects to fall on your phone.
• Do not use any cleaning agents
containing alcohol, ammonia, benzene,
or abrasives as these may harm the
set.
• Do not use the product in places
where there are explosive hazards.
• Do not let small metal objects come
into contact with the product. This can
deteriorate audio quality and damage
the product.
• Active mobile phones in the vicinity
may cause interference.
About operating and storage
temperatures:
• Operate in a place where temperature
is always between 0 and 35º C (32 to
95º F).
• Store in a place where temperature is
always between -20 and 45º C (-4 to
113º F).
• Battery life may be shortened in low
temperature conditions.
2.2 Conformity
We, Philips declare that the product is in
compliance with the essential requirements
and other relevant provisions of Directive
1999/5/EC. This product can only be
connected to the analogue telephone
networks of the countries mentioned on
the packaging.
You can find the Declaration of
Conformity on www.p4c.philips.com.
2.3 Electric, Magnetic and Electromagnetic Fields ("EMF")
1. Philips Royal Electronics manufactures
and sells many consumer oriented
products which usually, as with any
electronic apparatus, have the ability
to emit and receive electro magnetic
signals.
2. One of Philips' leading Business
Principles is to take all necessary
health and safety precautions for our
products, to comply with all applicable
legal requirements and to stay well
within the EMF standards applicable at
the time of producing the products.
3. Philips is committed to develop,
produce and market products that
cause no adverse health effects.
4. Philips confirms that if its products are
handled properly for their intended
use, they are safe to use according to
scientific evidence available today.
5. Philips plays an active role in the
development of international EMF and
safety standards, enabling Philips to
anticipate further developments in
standardisation for early integration in
its products.
Important 7
2.4 Recycle your batteries
Do not dispose your rechargeable
batteries. Call the toll fee number 1-800822-8837 to get instructions on how to
recycle your batteries.
The RBRC
®
Seal on
the nickel metal
hydride battery
indicates that Philips
Royal Electronics is
voluntarily
participating in an industry program to
collect and recycle these batteries at the
end of their useful lives, when taken out
of service within the United States and
Canada.
The RBRC
®
program provides a
convenient alternative to placing used
nickel metal hydride batteries into the
trash or municipal waste, which may be
illegal in your area.
Philips’s participation in RBRC
®
makes it
easy for you to drop off the spent battery
at local retailers participating in the
®
RBRC
program or at authorized Philips
product service centers.
Please call 1-800-8-BATTERY for
information on Ni-MH battery recycling
and disposal bans/restrictions in your
area. Philips’s involvement in this prog ram
is part of its commitment to protecting
our environment and conserving natural
resources.
®
RBRC
is a registered trademark of
Rechargeable Battery Recycling
Corporation.
2.5 Service Centers
Call Center (USA and Canada):
800-233-8413
E-mail support:
accessorysupport@philips.com
8Important
Loading...