Philips PCD3353AP-013-F4, PCD3353AT-013, PCD3351AT-056-F3, PCD3352AT-054-F4, PCD3351AP-056-F3 Datasheet

...

DATA SH EET

Product speciﬁcation Supersedes data of 1996 Dec 18 File under Integrated Circuits, IC03

1999 Oct 28

INTEGRATED CIRCUITS

PCA3351C; 52C; 53C; PCD3351A; 52A; 53A

8-bit microcontrollers with DTMF generator and 128 bytes EEPROM

1999 Oct 28 2

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers with DTMF generator and 128 bytes EEPROM

PCA3351C; 52C; 53C;

PCD3351A; 52A; 53A

CONTENTS

1 FEATURES 2 GENERAL DESCRIPTION 3 ORDERING INFORMATION 4 BLOCK DIAGRAM 5 PINNING INFORMATION

5.1 Pinning

5.2 Pin description 6 FREQUENCY GENERATOR

6.1 Frequency generator derivative registers

6.2 Melody output (P1.7/MDY)

6.3 Frequency registers

6.4 DTMF frequencies

6.5 Modem frequencies

6.6 Musical scale frequencies 7 EEPROM AND TIMER 2 ORGANIZATION

7.1 EEPROM registers

7.2 EEPROM latches

7.3 EEPROM flags

7.4 EEPROM macros

7.5 EEPROM access

7.6 Timer 2 8 DERIVATIVE INTERRUPTS

9 TIMING 10 RESET 11 IDLE MODE 12 STOP MODE 13 INSTRUCTION SET RESTRICTIONS 14 OVERVIEW OF PORT AND

POWER-ON-RESET CONFIGURATIONS 15 SUMMARY OF DERIVATIVE REGISTERS 16 HANDLING 17 LIMITING VALUES 18 DC CHARACTERISTICS 19 AC CHARACTERISTICS 20 PACKAGE OUTLINES 21 SOLDERING

21.1 Reflow soldering

21.2 Wave soldering

21.3 DIP

21.4 Repairing soldered joints 22 DEFINITIONS 23 LIFE SUPPORT APPLICATIONS

1999 Oct 28 3

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers with DTMF generator and 128 bytes EEPROM

PCA3351C; 52C; 53C;

PCD3351A; 52A; 53A

1 FEATURES

• 8-bit CPU, ROM, RAM, EEPROM and I/O; all in one (28-lead or 32-lead) package

• ROM: – 2 kbytes (PCA3351C and PCD3351A) – 4 kbytes (PCA3352C and PCD3352A) – 6 kbytes (PCA3353C and PCD3353A)

• RAM: – 64 bytes (PCA3351C and PCD3351A) – 128 bytes (PCA3352C, PCD3352A, PCA3353C and

PCD3353A)

• 128 bytes Electrically Erasable Programmable Read-Only Memory (EEPROM)

• Over 100 instructions (based on MAB8048) all of 1 or 2 cycles

• 20 quasi-bidirectional I/O port lines

• 8-bit programmable Timer/event counter 1

• 8-bit reloadable Timer 2

• Three single-level vectored interrupts:

– external – 8-bit programmable Timer/event counter 1 – derivative; triggered by reloadable Timer 2

• Twotestinputs,oneofwhichalsoservesastheexternal interrupt input

• DTMF, modem, musical tone generator

• Reference for supply and temperature-independent

tone output

• Filtering for low output distortion (CEPT compatible)

• Melody output for ringer application

• Power-on-reset

• Stop and Idle modes

• Supply voltage: 1.8 to 6 V (DTMF tone output and

EEPROM erase/write from 2.5 V)

• Clock frequency: 1 to 16 MHz (3.58 MHz for DTMF suggested)

• Operating ambient temperature: −25 to +70 °C or 0to50°C

• Manufactured in silicon gate CMOS process.

2 GENERAL DESCRIPTION

This data sheet details the specific properties of the devices referred to. The shared properties of the PCD33xxA family of microcontrollers are described in the

“PCD33xxA family”

data sheet, which should be read in

conjunction with this publication.

• ‘PCA3351C; 52C; 53C’ denotes the types PCA3351C, PCA3352C and PCA3353C. Unless specified, these types will hereafter be referred to collectively as ‘PCA335xC’.

• ‘PCD3351A; 52A; 53A’ denotes the types PCD3351A, PCD3352A, PCD3353A. Unless specified, these types will hereafter be referred to collectively as ‘PCD335xA’.

The PCA335xC and PCD335xA are microcontrollers designed primarily for telephony applications. They include an on-chip generator for dual tone multifrequency (DTMF), modem and musical tones. In addition to dialling, generated frequencies can be made available as square waves for melody generation, providing ringer operation.

The PCA335xC and PCD335xA also incorporate 128 bytes of EEPROM, permitting data storage without battery backup. The EEPROM can be used for storing telephone numbers, particularly for implementing redial functions.

The PCA335xC and PCD335xA can be emulated with the OTP microcontrollers PCD3755A and PCD3755E. See Chapter 14, Table 25.

The instruction set is similar to that of the MAB8048 and is a sub-set of that listed in the

“PCD33xxA family”

data

sheet. The differences between PCA335xC and PCD335xA are

shown in Table 1.

Table 1 Differences: PCA335xC and PCD335xA

Note

1. See Chapter 14, Table 26.

TYPE V

POR

AMBIENT

TEMP. RANGE

PCA335xC ﬁxed at 2.0 V ±0.3 V 0 to 50 °C PCD335xA (1.2 to 3.6 V) ±0.5 V

(1)

−25 to +70 °C

1999 Oct 28 4

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers with DTMF generator and 128 bytes EEPROM

PCA3351C; 52C; 53C;

PCD3351A; 52A; 53A

3 ORDERING INFORMATION

Note

1. The types: a) PCA335xC denotes: PCA3351C, PCA3352C or PCA3353C. b) PCD335xA denotes: PCD3351A, PCD3352A or PCD3353A.

TYPE

NUMBER

(1)

PACKAGE

NAME DESCRIPTION VERSION

PCA335xCP DIP28 plastic dual in-line package; 28 leads (600 mil) SOT117-1 PCD335xAP PCA335xCT SO28 plastic small outline package; 28 leads; body width 7.5 mm SOT136-1 PCD335xAT PCA335xCH LQFP32 plastic low proﬁle quad ﬂat package; 32 leads; body 7 × 7 × 1.4 mm SOT358-1 PCD335xAH

1999 Oct 28 5

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers with DTMF generator

and 128 bytes EEPROM

PCA3351C; 52C; 53C;

PCD3351A; 52A; 53A

This text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here in

_white to force landscape pages to berotatedcorrectlywhen browsing through the pdf in the Acrobat reader.This text is here inThis text is here in

white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader. white to force landscape pages to be ...

4 BLOCK DIAGRAM

handbook, full pagewidth

MLA537

PORT 0

FLIP-FLOP

PORT 0 BUFFER

HIGHER PROGRAM COUNTER

LOWER PROGRAM COUNTER

PROGRAM

STATUS

WORD

MEMORY

BANK

FLIP-FLOPS

6 kbytes

(PCD3353C; 53A)

4 kbytes

(PCD3352C; 52A)

2 kbytes

(PCD3351C; 51A)

128 bytes

(PCD3352C; 52A; 53C; 53A)

64 bytes

(PCD3351C; 51A)

DECODE

RESIDENT ROM

5888 8

P0.0 to P0.7

TIMER/ EVENT

COUNTER

INTERNAL

CLOCK FREQ.

PORT 1 BUFFER

PORT 1

FLIP-FLOP

P1.7/MDY P1.0 to P1.6

PORT 2 BUFFER

PORT 2

FLIP-FLOP

P2.0 to P2.3

4 7

MELODY CONTROL REGISTER

TONE

FILTER

OSCILLATOR

RAM

ADDRESS

ACCUMULATOR

TEMPORARY REGISTER 1

TEMPORARY REGISTER 2

ARITHMETIC

DECIMAL

ADJUST

CONTROL AND TIMING

XTAL2XTAL1RESET

CE/T0

STOP

IDLE

INTERRUPT INITIALIZE

MULTIPLEXER

8 LEVEL STACK

(VARIABLE LENGTH)

OPTIONAL SECOND

DATA STORE

D E C O D E

timer interrupt

external interrupt

RESIDENT RAM ARRAY

derivative

interrupt

LOGIC UNIT

INSTRUCTION

AND

DECODER

CONDITIONAL

BRANCH

LOGIC

CE/T0

TIMER

FLAG CARRY

ACC

ACC BIT

TEST

LGF

HGF

SINE WAVE

GENERATOR

INTERRUPT

LOGIC

EEPROM

DATA

TRANSFER

EEPROM ADDRESS

EEPROM CONTROL REGISTER

TIMER 2

TIMER 2 RELOAD

EEPROM

PCA3351C PCA3352C PCA3353C

PCD3351A PCD3352A PCD3353A

POWER-ON-RESET

POR

RESET

Fig.1 Block diagram.

1999 Oct 28 6

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers with DTMF generator and 128 bytes EEPROM

PCA3351C; 52C; 53C;

PCD3351A; 52A; 53A

5 PINNING INFORMATION

5.1 Pinning

Fig.2 Pin configuration for DIP28 (SOT117-1) and SO28 (SOT136-1).

handbook, halfpage

1 2 3 4 5 6 7 8

9 10 11 12 13

28 27 26 25 24 23 22 21 20 19 18 17 16 1514

P0.1 P0.2 P0.3 P0.4 P0.5 P0.6 P0.7

T1 XTAL1 XTAL2

RESET

CE/T0

P1.0 P1.1

P0.0 P2.3 P2.2 P2.1

TONE V

P2.0 P1.7/MDY P1.6 P1.5 P1.4 P1.3 P1.2

PCA335xC PCD335xA

(1)

MLA538

(1) PCA335xC denotes:

PCA3351C, PCA3352C or PCA3353C.

PCD335xA denotes: PCD3351A, PCD3352A or PCD3353A.

Fig.3 Pin configuration for LQFP32 (SOT358-1).

handbook, full pagewidth

MGB795

1 2 3 4 5 6 7 8

24 23 22 21 20 19 18 17

n.c. P0.5 P0.6 P0.7

T1 XTAL1 XTAL2

RESET

CE/T0

P1.0

P1.1

P1.2

P1.3

P1.4

P1.5

n.c.

P1.6

P2.0

P2.1

P2.2

P2.3

P0.0

n.c.

P0.1

P0.2

P0.3

P0.4

TONE V

P1.7/MDY

n.c.

PCA335xCH PCD335xAH

(1)

(1) PCA335xCH denotes:

PCA3351CH, PCA3352CH or PCA3353CH.

PCD335xAH denotes: PCD3351AH, PCD3352AH or PCD3353AH.

1999 Oct 28 7

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers with DTMF generator and 128 bytes EEPROM

PCA3351C; 52C; 53C;

PCD3351A; 52A; 53A

5.2 Pin description Table 2 SOT117-1 and SOT136-1 packages (for information on parallel I/O ports, see Chapter 14)

Table 3 SOT358-1 package (for information on parallel I/O ports, see Chapter 14)

SYMBOL PIN TYPE DESCRIPTION

P0.1 to P0.7 1 to 7 I/O 7 bits of Port 0: 8-bit quasi-bidirectional I/O port T1 8 I Test 1 or count input of 8-bit Timer/event counter 1 XTAL1 9 I crystal oscillator or external clock input XTAL2 10 O crystal oscillator output RESET 11 I reset input CE/

T0 12 I Chip Enable or Test 0 P1.0 to P1.6 13 to 19 I/O 7 bits of Port 1: 8-bit quasi-bidirectional I/O port P1.7/MDY 20 I/O 1 bit of Port 1: 8-bit quasi-bidirectional I/O port; or melody output P2.0 21 I/O 1 bit of Port 2: 4-bit quasi-bidirectional I/O port V

22 P ground TONE 23 O DTMF output V

24 P positive supply voltage P2.1 to P2.3 25 to 27 I/O 3 bits of Port 2: 4-bit quasi-bidirectional I/O port P0.0 28 I/O 1 bit of Port 0: 8-bit quasi-bidirectional I/O port

SYMBOL PIN TYPE DESCRIPTION

n.c. 1 − not connected P0.5 to P0.7 2 to 4 I/O 3 bits of Port 0: 8-bit quasi-bidirectional I/O port T1 5 I Test 1 or count input of 8-bit Timer/event counter 1 XTAL1 6 I crystal oscillator or external clock input XTAL2 7 O crystal oscillator output RESET 8 I reset input CE/

T0 9 I Chip Enable or Test 0 P1.0 to P1.2 10 to 12 I/O 3 bits of Port 1: 8-bit quasi-bidirectional I/O port n.c. 13 − not connected P1.3 to P1.5 14 to 16 I/O 3 bits of Port 1: 8-bit quasi-bidirectional I/O port n.c. 17 − not connected P1.6 18 I/O 1 bit of Port 1: 8-bit quasi-bidirectional I/O port P1.7/MDY 19 I/O 1 bit of Port 1: 8-bit quasi-bidirectional I/O port; or melody output P2.0 20 I/O 1 bit of Port 2: 4-bit quasi-bidirectional I/O port V

21 P ground TONE 22 O DTMF output V

23 P positive supply voltage P2.1 to P2.3 24 to 26 I/O 3 bits of Port 2: 4-bit quasi-bidirectional I/O port P0.0 27 I/O 1 bit of Port 0: 8-bit quasi-bidirectional I/O port n.c. 28 − not connected P0.1 to P0.4 29 to 32 I/O 4 bits of Port 0: 8-bit quasi-bidirectional I/O port

1999 Oct 28 8

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers with DTMF generator and 128 bytes EEPROM

PCA3351C; 52C; 53C;

PCD3351A; 52A; 53A

6 FREQUENCY GENERATOR

A versatile frequency generator section is provided (see Fig.4). For normal operation, use a 3.58 MHz quartz crystal or PXE resonator. The frequency generator includes precision circuitry for dual tone multifrequency (DTMF) signals, which is typically used for tone dialling telephone sets.

Theirfrequencies are provided in purely sinusoidalformon the TONE output or as square waves on the port line P1.7/MDY.

The TONE output can alternatively issue twelve modem frequencies for data rates between 300 and 1200 bits/s.

In addition to DTMF and modem frequencies, two octaves of musical scale in steps of semitones are available.

When no tones are generated the TONE output is in 3-state mode.

6.1 Frequency generator derivative registers

6.1.1 HIGH AND LOW GROUP FREQUENCY REGISTERS Table 4 gives the addresses, symbols and access types of the High Group Frequency (HGF) and Low Group Frequency

(LGF) registers.

Table 4 Hexadecimal addresses, symbols, access types and bit symbols of the frequency registers

6.1.2 MELODY CONTROL REGISTER (MDYCON)

Table 5 Melody Control Register, MDYCON (address 13H; access type R/W)

Table 6 Description of MDYCON bits

ADDRESS

SYMBOL

ACCESS

TYPE

BIT SYMBOLS

7 6 5 4 3 2 1 0

11H HGF W H7H6H5H4H3H2H1H0 12H LGF W L7L6L5L4L3L2L1L0

7 6 5 4 3 2 1 0

0000000EMO

BIT SYMBOL DESCRIPTION

7to1 − These bits are set to a logic 0.

0 EMO Enable Melody Output. If bit EMO = 0, then P1.7/MDY is a standard port line.

If bit EMO = 1, then P1.7/MDY is the melody output. EMO = 1 does not inhibit the port instructions for P1.7/MDY. Therefore the state of both port line and ﬂip-ﬂop may be read in and the port ﬂip-ﬂop may be written by port instructions. However, the port ﬂip-ﬂop of P1.7/MDY must remain set to avoid conﬂicts between melody and port outputs. When the HGF contents are zero while EMO = 1, P1.7/MDY is in the HIGH state.

1999 Oct 28 9

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers with DTMF generator and 128 bytes EEPROM

PCA3351C; 52C; 53C;

PCD3351A; 52A; 53A

Fig.4 Block diagram of the frequency generator and melody output (P1.7/MDY) section.

handbook, full pagewidth

MLC416

HGF REGISTER

MELODY CONTROL

LGF REGISTER

INTERNAL BUS

SWITCHED

CAPACITOR

BANDGAP VOLTAGE

REFERENCE

DIGITAL

SINE WAVE

SYNTHESIZER

DIGITAL

SINE WAVE

SYNTHESIZER

SWITCHED

CAPACITOR

LOW-PASS

FILTER

DAC

RC LOW-PASS

FILTER

TONE

PORT/MELODY

OUTPUT LOGIC

P1.7/ MDY

square wave

1999 Oct 28 10

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers with DTMF generator and 128 bytes EEPROM

PCA3351C; 52C; 53C;

PCD3351A; 52A; 53A

6.2 Melody output (P1.7/MDY)

The melody output (P1.7/MDY) is very useful for generating musical notes when a purely sinusoidal signal is not required, such as for ringer applications.

The square wave (duty cycle =12⁄23 or 52%) will include the attenuated harmonics of the base frequency, which is defined by the contents of the HGF register (Table 4). However, even higher frequency notes may be produced since the low-pass filtering on the TONE output is not applied to the P1.7/MDY output. This results in the minimum decimal value x in the HGF register (see equation in Section 6.3) being 2 for the P1.7/MDY output, rather than 60 for the TONE output. A sinusoidal TONE output is produced at the same time as the melody square wave, but due to the filtering, the higher frequency sine waves with x < 60 will not appear at the TONE output.

Since the melody output is shared with P1.7, the port flip-flop of P1.7 has to be set HIGH before using the melodyoutput.Thistoavoidconflictsbetween melody and port outputs. The melody output drive depends on the configuration of port P1.7/MDY, see Chapter 14, Table 26.

6.3 Frequency registers

The two frequency registers HGF and LGF define two frequencies. From these, the digital sine synthesizers together with the Digital-to-Analog Converters (DACs) construct two sine waves. Their amplitudes are precisely scaled according to the bandgap voltage reference. This ensures tone output levels independent of supply voltage and temperature.

The amplitude of the Low Group Frequency sine wave is attenuated by 2 dB compared to the amplitude of the High Group Frequency sine wave.

The two sine waves are summed and then filtered by an on-chip switched capacitor and RC low-pass filters. These guarantee that all DTMF tones generated fulfil the CEPT recommendations with respect to amplitude, frequency deviation, total harmonic distortion and suppression of unwanted frequency components.

The value 00H in a frequency register stops the corresponding digital sine synthesizer. If both frequency registers contain 00H, the whole frequency generator is shut off, resulting in lower power consumption.

Thefrequency of the sinewavegeneratedfrom either HGF or LGF is a function of the decimal value ‘x’ held in the register. The variables are related by the equation:

; where 60 ≤ x ≤ 255 for TONE output.

6.4 DTMF frequencies

Assuming an oscillator frequency f

xtal

= 3.58 MHz, the DTMF standard frequencies can be implemented as shown in Table 7.

The relationships between telephone keyboard symbols, DTMFfrequencypairsandthefrequencyregistercontents are given in Table 8.

Table 7 DTMF standard frequencies and their

implementation; value = LGF, HGF contents

Table 8 Dialling symbols, corresponding DTMF

frequency pairs and frequency register contents

xtal

23 x 2+()[]

-----------------------------

VALUE

(HEX)

FREQUENCY (Hz) DEVIATION

STANDARD GENERATED (%) (Hz)

DD 697 697.90 0.13 0.90

C8 770 770.46 0.06 0.46 B5 852 850.45 −0.18 −1.55 A3 941 943.23 0.24 2.23 7F 1209 1206.45 −0.21 −2.55

72 1336 1341.66 0.42 5.66 67 1477 1482.21 0.35 5.21

5D 1633 1638.24 0.32 5.24

TELEPHONE

KEYBOARD

SYMBOLS

DTMF FREQ.

PAIRS

(Hz)

LGF

VALUE

(HEX)

HGF

VALUE

(HEX)

0 (941, 1336) A3 72 1 (697, 1209) DD 7F 2 (697, 1336) DD 72 3 (697, 1477) DD 67 4 (770, 1209) C8 7F 5 (770, 1336) C8 72 6 (770, 1477) C8 67 7 (852, 1209) B5 7F 8 (852, 1336) B5 72 9 (852, 1477) B5 67 A (697, 1633) DD 5D

B (770, 1633) C8 5D C (852, 1633) B5 5D D (941, 1633) A3 5D

• (941, 1209) A3 7F

# (941, 1477) A3 67

1999 Oct 28 11

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers with DTMF generator and 128 bytes EEPROM

PCA3351C; 52C; 53C;

PCD3351A; 52A; 53A

6.5 Modem frequencies

Again assuming an oscillator frequency f

xtal

= 3.58 MHz, the standard modem frequencies can be implemented as in Table 9. It is suggested to define the frequency by the HGF register while the LGF register contains 00H, disabling Low Group Frequency generation.

Table 9 Standard modem frequencies and their

implementation

Notes

1. Standard is V.21.

2. Standard is Bell 103.

3. Standard is Bell 202.

4. Standard is V.23.

6.6 Musical scale frequencies

Finally, two octaves of musical scale in steps of semitones can be realized, again assuming an oscillator frequency f

xtal

= 3.58 MHz (Table 10). It is suggested to define the frequency by the HGF register while the LGF contains 00H, disabling Low Group Frequency generation

Table 10 Musical scale frequencies and their

implementation

Note

1. Standard scale based on A4 @ 440 Hz.

HGF

VALUE

(HEX)

FREQUENCY (Hz) DEVIATION

MODEM GENERATED (%) (Hz)

9D 980

(1)

978.82 −0.12 −1.18

82 1180

(1)

1179.03 −0.08 −0.97

8F 1070

(2)

1073.33 0.31 3.33

79 1270

(2)

1265.30 −0.37 −4.70

80 1200

(3)

1197.17 −0.24 −2.83

45 2200

(3)

2192.01 −0.36 −7.99

76 1300

(4)

1296.94 −0.24 −3.06

48 2100

(4)

2103.14 0.15 3.14

5C 1650

(1)

1655.66 0.34 5.66

52 1850

(1)

1852.77 0.15 2.77

4B 2025

(2)

2021.20 −0.19 −3.80

44 2225

(2)

2223.32 −0.08 −1.68

NOTE

HGF

VALUE

(HEX)

FREQUENCY (Hz)

STANDARD

(1)

GENERATED

D#5 F8 622.3 622.5

E5 EA 659.3 659.5 F5 DD 698.5 697.9

F#5 D0 740.0 741.1

G5 C5 784.0 782.1

G#5 B9 830.6 832.3

A5 AF 880.0 879.3

A#5 A5 923.3 931.9

B5 9C 987.8 985.0 C6 93 1046.5 1044.5

C#6 8A 1108.7 1111.7

D6 82 1174.7 1179.0

D#6 7B 1244.5 1245.1

E6 74 1318.5 1318.9 F6 6D 1396.9 1402.1

F#6 67 1480.0 1482.2

G6 61 1568.0 1572.0

G#6 5C 1661.2 1655.7

A6 56 1760.0 1768.5

A#6 51 1864.7 1875.1

B6 4D 1975.5 1970.0 C7 48 2093.0 2103.3

C#7 44 2217.5 2223.3

D7 40 2349.3 2358.1

D#7 3D 2489.0 2470.4

+ 25 hidden pages