Philips MX3291B User Manual

DFU MX2791 MX3291 MX3691

Once your PHILIPS MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of

owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card

enclosed with your purchase at once. And take advantage of these important benefits.

Return your Warranty Registration card today to ensure you

receive all the benefits you’re entitled to.

Congratulations

on your

purchase,

and welcome to the

“family!”

Dear PHILIPS MAGNAVOX product owner:

Thank you for your confidence in PHILIPS MAGNAVOX. You’ve selected one of the best-built, bestbacked products available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come.

As a member of the PHILIPS MAGNAVOX “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry.

What’s more, your purchase guarantees you’ll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network.

And most importantly you can count on our uncompromising commitment to your total satisfaction. All of this is our way of saying welcome–and thanks for investing in a PHILIPS MAGNAVOX product.

Sincerely,

Robert Minkhorst President and Chief Executive Officer

Know these

safety

symbols

t This “bolt of lightning” indicates uninsulated material within your unit may cause an electrical

shock. For the safety of everyone in your household, please do not remove product covering.

s The “exclamation point” calls attention to features for which you should read the enclosed lit-

erature closely to prevent operating and maintenance problems. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT

TO RAIN OR MOISTURE. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully insert. ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la

borne correspondante de la prise et pousser jusqu’au fond.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Warranty

Verification

Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your PHILIPS MAGNAVOX warranty.

Owner

Confirmation

Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss.

Model

Registration

Returning your Warranty Registration Card right away guarantees you’ll receive all the information and special offers which you qualify for as the owner of your model.

P.S. Remember, to get the most from your PHILIPS

MAGNAVOX product, you must return your Warranty Registration Card within 10 days. So please mail it to us right now!

Hurry!

Visit our World Wide Web Site at http://www.philipsmagnavox.com

SAFETY INSTRUCTIONS - Read before operating equipment

This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.

1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated.

2. Retain Instructions - The safety and operating instructions should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions should be followed.

5. Water and Moisture - The appliance should not be used near water

- for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool, etc.

6. Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer.

6A. An appliance and cart combination should be moved

with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

7. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

8. Ventilation - The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a builtin installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

9. Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

10 . Power Sources - The appliance should be connected to a power sup-

ply only of the type described in the operating instructions or as marked on the appliance.

11. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, convenience receptacles, and the point where they exit from the appliance.

12. Cleaning - The appliance should be cleaned only as recommended by the manufacturer.

13. Power Lines - An outdoor antenna should be located away from power lines.

14. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges.

Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mats and supporting structure grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antennadischarge unit, connection to grounding electrodes and requirements for the grounding electrode. See Fig. below.

15. Non-use Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

16 . Object and Liquid Entry - Care should be taken so that objects do not

fall and liquids are not spilled into the enclosure through openings.

17. Damage Requiring Ser vice - The appliance should be serviced by qualified service personnel when:

A. The power supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the appliance;

C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a

marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

18. Ser vicing - The user should not attempt to service the appliance

beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

MAC3964

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC ART 250, PART H)

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE (NEC)

Example of Antenna Grounding as per NEC - National Electric Code

Introduction

Welcome/Registration of Your TV............................2

Safety/Precautions .....................................................3

Table of Contents.......................................................4

Features......................................................................5

On-Screen MENU

Picture

✧ Adjusting the TV Picture ...................................6

Features

✧ Setting the TV’s On-screen Clock......................7

✧ Activating the TV’s On Timer Control...............8

✧ Selecting the TV’s On Timer Channel ..............9

✧ Selecting the TV’s On Timer Tuner ................10

✧ Setting the TV’s On Timer Startup Time..........11

✧ Turning on the On Timer Display.....................12

✧ Setting the Access Code within SmartLock .....13

✧ Using SmartLock to Block Channels ...............14

✧ Using the Dynamic Noise Reduction (DNR)

Control ..............................................................15

✧ Using the Contrast + Control ............................16

✧ Setting the TV for Closed Caption...................17

✧ Using the Sleep Timer Control.........................18

Sound

✧ Adjusting the Treble, Bass, and Balance Sound

Controls.............................................................19

✧ Setting the TV for Stereo and SAP Programs ..20

✧ Using the Incredible Stereo Control.................21

✧ Using the Volume Bar Control .........................21

✧ Using the Audio Out Jacks (with TV Speaker

On/Off Control) ................................................22

✧ Using Surround Sound External Speakers .......23

✧ Using the TV's Audio/Video Input Jacks....24-25

TABLE OF CONTENTS

Remote Control Operation

Using the Remote Locator Feature .........26-27

Using the Smart Picture Control ..................28

Using the Smart Sound Control (AVL)...................29

Using the Surf and Alternate Channel Buttons.......30

Setting the Remote to Operate

Accessory Devices ..........................................31-32

Setting the TV Remote to Operate Accessory Devices

(Search Method) .....................................................33

Remote Control Direct Entry Code List ............34-35

Using the Remote’s VCR Buttons ..........................36

Picture-In-Picture (PIP)

PIP Connection ...........................................37

Choosing the PIP Picture Source ............................38

How to Use PIP with the TV Remote ....................39

Adjusting the PIP Color and Tint Controls ............40

More PIP Connections........................................41-42

General Information

Tips if Something Isn’t Working................43

Glossary of TV Terms..............................................44

Index ........................................................................45

Factory Service Locations..................................46-47

Warranty...................................................................48

Infrared Remote Control works your TV set, VCR, and a variety of wireless remote control Cable Converters (Satellite Receivers, DVD, etc.).

Standard broadcast (VHF/UHF) or Cable TV (CATV) channel capability.

Stereo Ready TV with built-in audio amplifier and

twin speaker system for receiving TV programs broadcast in stereo sound.

Closed Captioning allows the viewer to read TV program dialogue or voice conversations as on-screen text.

Automatic Programming of Channels for quick and easy selection of favorite stations available in your area.

On-Screen Features (in either English, French, or Spanish) show helpful messages for setting of TV controls.

Audio/Video Jackpanel for direct connections with VCRs (or other video accessories) providing quality TV picture and sound playback.

Twin Antenna (A/B) Inputs for easy displaying of two separate signal sources on the TV. An A/B button on the remote control switches the TV’s Main screen between the two Antenna (A& B) Input options.

Surround Sound external speaker connections allow you hook your TV to external audio equipment for more dynamic sound replay and audio effects.

On Timer automatically turns the TV ON at a preset time, and channel.

Sleep-Timer automatically turns the TV OFF at preset times.

SmartLock feature allows you to block the viewing of certain channel or external audio/video connections were you might not want your children viewing inappropriate material.

Smart Picture allows you to set the picture color, tint, contrast, etc. for various types of programming such as Sports, Movies, Multi Media (Gaming), or Weak Signals with the push of one button.

Smart Sound controls the sudden volume changes that occur when changing programs or when a commercial break comes on. It eliminates the peaks and valleys in the TV’s sound with one pleasant listening level.

Picture-In-Picture (PIP) allows you view to different programs (or picture sources) on the TV screen at the same time. PIP will also let you swap the pictures, move the PIP picture to any of the four corners, and even freeze the picture until you shut it off.

Use the simple Set-Up Guide (supplied with your TV information packet) for details on:

• Cable/Antenna Hook-ups

• Auto-Programming of Channels

• Channel Editing

• Automatic Clock Setting (Smart Clock)

• Basic TV and Remote Control Operation

• On-Screen Menu Use

SET-UP AND QUICK USE GUIDE

SET-U

P ANDQUICKUSEGUIDE

TABLEOF CONTENTS

Getting Started

Warning/Precautions..................................1

Hooking Up Your TV................................1

How to Use the First Time Set-Up Control ..............2

Basic TVand Remote Control Operation.................3

How to Use the On-Screen Menu Controls...............4

2 1

2 3

4 5 6

• Fordetails on product registration, warranty, and service refer to the other literature included

with your TVinformation packet. Please retain all these materials and keep them handy for future reference.

75V UHF/VHF

ANT/CABLE

REAR SURROUND EXT. SPEAKERS

VCR/AUX IN VIDEOAUDIO

L 8V

VIDEO OUT

VAR AUDIO OUT SUR AUDIO OUT

75V UHF/VHF

ANT/CABLE

REAR SURROUND EXT. SPEAKERS

VCR/AUX IN

VIDEO AUDIO

VIDEO OUT

VAR AUDIO OUT SUR AUDIO OUT

combination (outdoor

or indoor) antenna receives normal broadcast channels 2-13 (VHF) and 14-69 (UHF). Your connection to such an antenna is easy since there is only one antenna plug (75Ωohm) on the back of your TV- and that’s where the antenna goes.

ANTENNA

OUTDOOR/INDOOR

Remember, be sure to set the TVfor the type signal you've connected (see "SETUP" on page 2 of this Guide.)

To order any optional accessory contact your dealer or call the toll-free accessory ordering number (1-800-292-

6066):

SMART HELP

If yourantenna has a

round cable(75 ohm) on the

end, then you're ready to connect it to the TV.

If yourantenna has flat twinlead wire (300 ohm), you first

need to attach the antenna wires to the screws on a 300 to 75 ohm adapter.

Push the round endof the

adapter (or antenna) onto the ANTENNAplug on the rear of the TV. If the round end of the antenna wire is threaded, screw it down tight.

STOP

300 to 75Ω

Adapter

(483521827003)

Twin Lead

Wire

Back of TV

BEGIN

WARNING: TO PREVENTFIRE OR SHOCK HAZARD DO NOTEXPOSE THIS UNITTO RAIN OR EXCESSIVE MOISTURE.

Note: For homes with separate UHF and VHF antennas you will need an optional combiner to connect to the TV.

U/VCombiner

75-300 Ohm Adapter

Round Cable

75ΩOhm

Combination VHF/UHF Antenna

(Outdoor or Indoor)

Back of TV

Projection Television and Remote Control

NOTE: This owner's manual is used with several different television models. Not all features (and drawings) discussed in this manual will necessarily match those found with your television system. This is normal and does not require you contacting your dealer or requesting service.

FEATURES

Your new television and its packing contain materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and minimize the amounts which need to be properly disposed.

Your product also uses batteries which should not be thrown away when depleted, but should be handed in and disposed of as small chemical waste.

Please find out about the local regulations on how to dispose of your old television, batteries, and packing materials whenever you replace existing equipment.

END-OF-LIFE DISPOSAL

rt.Verysmart.

UHF

300

V H F

ANT/CABLE REAR SURROUND 75V UHF/VHF EXT. SPEAKERS

VIDEO

VAR AUDIO OUT

VCR/AUX IN

SUR AUDIO OUT

VIDEOAUDIO

OUT

R E T P A D

A 0

-30 75

LOCATOR

POWER

AV ON/OFF POSITION FREEZE

VCR

ACC

SWAP SOURCE PIP CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

CC STATUS CLOCK A/CH

EXIT

TV/VCR

SLEEP TUNER

VCR

RECORD

A/B

MULTI

MEDIA

INCREDIBLE

STEREO

BRIGHTNESS COLOR PICTURE SHARPNESS TINT COLOR TEMP

PICTURE

BRIGHTNESS COLOR PICTURE SHARPNESS TINT COLOR TEMP

. .

PICTURE

BRIGHTNESS COLOR PICTURE SHARPNESS TINT COLOR TEMP

PICTURE

BRIGHTNESS COLOR PICTURE SHARPNESS TINT COLOR TEMP

PICTURE

BRIGHTNESS COLOR PICTURE SHARPNESS TINT COLOR TEMP

PICTURE

PICTURE SOUND FEATURES INSTALL

BRIGHTNESS COLOR PICTURE SHARPNESS TINT COLOR TEMP

. .

BRIGHTNESS COLOR PICTURE SHARPNESS TINT COLOR TEMP

WARM

NORMAL

COOL

o adjust your TV picture con-

trols, select a channel and follow

the steps shown below:

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR RIGHT

©© button and the menu will shift

to the right to display an adjustment bar in front of the BRIGHTNESS control.

Use the CURSOR LEFT §§

or RIGHT ©© buttons to adjust

the BRIGHTNESS level of the picture.

After adjusting the BRIGHT-

NESS control, press the CURSOR DOWN ■ button to select another Picture adjustment; COLOR, PIC-

TURE, SHARPNESS, TINT, or COLOR TEMP. Use the CURSOR LEFT §§ or CURSOR RIGHT

©© buttons to adjust the selected

control.

HOW TO ADJUST THE TV PICTURE

Remember, when the bar

scale is centered, the control set-

tings are at normal mid-range levels.

BRIGHTNESS Press the ©© or §§

buttons until darkest parts of the picture are as bright as you prefer.

COLOR Press the ©© or §§ buttons to add or eliminate color.

PICTURE

Press the ©© or §§ but-

tons until lightest parts of the picture show good detail.

SHARPNESS

Press the ©© or §§

buttons to improve detail in the picture. TINT Press the ©© or §§ buttons to

obtain natural skin tones.

COLOR

TEMP Press the ©© or §§

buttons to select NORMAL, COOL, or WARM picture preferences. (NORMAL will keep the whites, white; COOL will make the whites, bluish; and WARM will make the whites, reddish.)

SMART HELP

BEGIN

LOCATOR

POWER

AV ON/OFF POSITION FREEZE

VCR

ACC

SWAP SOURCE PIP CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

CC STATUS CLOCK A/CH

EXIT

TV/VCR

SLEEP TUNER

VCR

RECORD

A/B

MULTI

MEDIA

INCREDIBLE

STEREO

FEATURES

TIMER

...

TIME ACTIVATE CHANNEL TUNER

12:30 PM

FEATURES

PICTURE SOUND FEATURES INSTALL

TIMER SmartLock DNR INCR. PICT. PIP

. .

TIMER SmartLock DNR INCR. PICT. PIP

TIME ACTIVATE CHANNEL TUNER

FEATURES

TIMER

...

TIME ACTIVATE CHANNEL TUNER

--:-- AM

our television comes with an

on-screen clock. During normal operation the clock appears on the screen when the STATUS/EXIT button is pressed or if the Timer DISPLAY control is turned ON.

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR DOWN ■

button twice to select the FEA-

TURES menu.

Press the CURSOR RIGHT

©© button and the menu will

shift to the left to display the

TIMER controls.

Press the CURSOR RIGHT

©© button again to shift the dis-

play left and highlight the TIME control.

Press the CURSOR RIGHT

©© button again to highlight the

time indicator area.

Press the NUMBERED buttons

to enter the correct time. (Use the

CURSOR UP © or CURSOR DOWN ■ buttons to set AM or PM.)

SETTING THE TV’S CLOCK

SMART HELP

Remember, be sure to

press “0” first and then the hour number for single digit entries.

The Clock can also be set automatically using the Smart Clock feature found on page 2 of the Quick Use Guide.

The television’s clock settings may be lost when it is unplugged (or AC power to the set is interrupted.)

BEGIN

FEATURES

TIMER

...

TIME ACTIVATE CHANNEL TUNER

12:30 PM

SURF

VOL CH

MUTE

CC STATUS CLOCK A/CH

EXIT

TV/VCR

SLEEP TUNER

VCR

RECORD

A/B

MULTI

MEDIA

INCREDIBLE

STEREO

The TIME (Clock) feature can be accessed directly by pressing the CLOCK button on the remote, then simply follow steps 5 and 6 to complete the task.

LOCATOR

POWER

AV ON/OFF POSITION FREEZE

VCR

ACC

SWAP SOURCE PIP CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

CC STATUS CLOCK A/CH

EXIT

TV/VCR

SLEEP TUNER

VCR

RECORD

A/B

MULTI

MEDIA

INCREDIBLE

STEREO

FEATURES

TIMER

...

OFF

FEATURES

TIMER

...

FEATURES

PICTURE SOUND FEATURES INSTALL

TIMER SmartLock DNR INCR. PICT. PIP

. .

TIMER SmartLock DNR INCR. PICT. PIP

TIME ACTIVATE CHANNEL TUNER

FEATURES

TIMER

...

TIME ACTIVATE CHANNEL TUNER

. .

TIME ACTIVATE CHANNEL TUNER

. .

TIME ACTIVATE CHANNEL TUNER

. .

ust like an alarm clock you can set the TV to turn itself on at the

same time everyday.

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR DOWN ■

button twice to select the FEA-

TURES menu.

Press the CURSOR RIGHT

©© button and the menu will

shift to the left to display the

TIMER controls.

Press the CURSOR RIGHT

©© button again to shift the dis-

play left, then CURSOR DOWN

■

to highlight the ACTIVATE

timer control.

Press the CURSOR RIGHT

©© button again to highlight the

ACTIVATE timer option. Then, press the CURSOR UP © or CURSOR DOWN ■buttons to turn the timer ON or OFF.

ACTIVATING THE TV’S ON TIMER CONTROL

SMART HELP

Remember, be sure to

set the time you want the television to turn on using the START TIME control as described on page 10.

BEGIN

LOCATOR

POWER

AV ON/OFF POSITION FREEZE

VCR

ACC

SWAP SOURCE PIP CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

CC STATUS CLOCK A/CH

EXIT

TV/VCR

SLEEP TUNER

VCR

RECORD

A/B

MULTI

MEDIA

INCREDIBLE

STEREO

FEATURES

TIMER

FEATURES

TIMER

...

TIME ACTIVATE CHANNEL TUNER

FEATURES

PICTURE SOUND FEATURES INSTALL

TIMER SmartLock DNR INCR. PICT. PIP

. .

TIMER SmartLock NR CONTRAST + PIP

TIME ACTIVATE CHANNEL TUNER

FEATURES

TIMER

...

TIME ACTIVATE CHANNEL TUNER

. .

sed along with the on timer

feature, you can select a specific channel that the television will tune to when the Timer ACTIVATE control is turned ON.

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR DOWN ■

button twice to select the FEATURES menu.

Press the CURSOR RIGHT

©© button and the menu will shift

to the left to display the TIMER controls.

Press the CURSOR RIGHT

©© button again to shift the dis-

play left, then CURSOR DOWN

■

to highlight the CHANNEL con-

trol.

Press the CURSOR RIGHT

©© button again to highlight the

channel indicator area.

Press the NUMBERED buttons

to enter the desired start up channel.

(Or, use the CHANNEL (+) or (–) buttons to select the desired channel.)

SELECTING THE TV’S ON TIMER CHANNEL

SMART HELP

Remember, be sure to

turn the Timer ACTIVATE control ON after selecting the desired start up channel. (Refer to

page 8 for further details.)

BEGIN

FEATURES

TIMER

FEATURES

TIMER

...

TIME ACTIVATE CHANNEL TUNER

. .

LOCATOR

POWER

AV ON/OFF POSITION FREEZE

VCR

ACC

SWAP SOURCE PIP CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

CC STATUS CLOCK A/CH

EXIT

TV/VCR

SLEEP TUNER

VCR

RECORD

A/B

MULTI

MEDIA

INCREDIBLE

STEREO

FEATURES

TIMER

FEATURES

TIMER

...

TIME ACTIVATE CHANNEL TUNER

FEATURES

PICTURE SOUND FEATURES INSTALL

TIMER SmartLock DNR INCR. PICT. PIP

. .

TIMER SmartLock NR CONTRAST + PIP

TIME ACTIVATE CHANNEL TUNER

FEATURES

TIMER

...

TIME ACTIVATE CHANNEL TUNER

. .

our TV is equipped with two

tuners. The TV can be programmed to tune to either ANT A or ANT B when the on timer is set.

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR DOWN ■

button twice to select the FEA-

TURES menu.

Press the CURSOR RIGHT

©© button and the menu will

shift to the left to display the

TIMER controls.

Press the CURSOR RIGHT

©© button again to shift the dis-

play left.

Press the CURSOR DOWN

■

to highlight the TUNER control.

Press the CURSOR RIGHT

©© button again to highlight the

TUNER Aor B control options.

Press the CURSOR UP © or

CURSOR DOWN■buttons to

select the “A” or “B” tuner inputs.

SETTING THE TV’S ON TIMER TUNER

BEGIN

LOCATOR

POWER

AV ON/OFF POSITION FREEZE

VCR

ACC

SWAP SOURCE PIP CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

CC STATUS CLOCK A/CH

EXIT

TV/VCR

SLEEP TUNER

VCR

RECORD

A/B

MULTI

MEDIA

INCREDIBLE

STEREO

FEATURES

TIMER

FEATURES

TIMER

...

ACTIVATE CHANNEL TUNER START TIME

12:00PM

FEATURES

PICTURE SOUND FEATURES INSTALL

TIMER SmartLock DNR INCR. PICT. PIP

. .

TIMER SmartLock NR CONTRAST + PIP

TIME ACTIVATE CHANNEL TUNER

FEATURES

TIMER

...

ACTIVATE CHANNEL TUNER START TIME

. .

...

sed along with the on timer

feature, you can select a specific time the television will turn on when the Timer ACTIVATE control is turned ON.

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR DOWN ■

button twice to select the FEATURES menu.

Press the CURSOR RIGHT

©© button and the menu will shift

to the left to display the TIMER controls.

Press the CURSOR RIGHT

©© button again to shift the dis-

play left, then CURSOR DOWN

■

to highlight the START TIME

control.

Press the CURSOR RIGHT

©© button again to highlight the

time indicator area.

Press the NUMBERED buttons

to enter the desired start up time.

(Use the CURSOR UP © or CURSOR DOWN ■ buttons to set AM or PM.)

SETTING THE TV’S ON TIMER START TIME

SMART HELP

Remember, be sure to

turn the Timer ACTIVATE control ON after setting the desired start up time. (Refer to page 8 for

further details.)

BEGIN

LOCATOR

POWER

AV ON/OFF POSITION FREEZE

VCR

ACC

SWAP SOURCE PIP CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

CC STATUS CLOCK A/CH

EXIT

TV/VCR

SLEEP TUNER

VCR

RECORD

A/B

MULTI

MEDIA

INCREDIBLE

STEREO

FEATURES

TIMER

FEATURES

TIMER

...

TIME ACTIVATE TUNER START TIME DISPLAY

OFF

FEATURES

TIMER

FEATURES

TIMER

...

CHANNEL TUNER START TIME DISPLAY

FEATURES

PICTURE SOUND FEATURES INSTALL

TIMER SmartLock DNR INCR. PICT. PIP

. .

TIMER SmartLock NR CONTRAST + PIP

TIME ACTIVATE CHANNEL TUNER

FEATURES

TIMER

...

CHANNEL TUNER START TIME DISPLAY

....

nce the television clock has

been set, you can use your television as a clock. The Timer DISPLAY control allows you to permanently display the time in the upper right corner of the screen.

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR DOWN ■

button twice to select the FEA-

TURES menu.

Press the CURSOR RIGHT

to the left to display the TIMER controls.

Press the CURSOR RIGHT

play left, then CURSOR DOWN

■

to highlight the DISPLAY control.

Press the CURSOR RIGHT

SETTING THE TV’S ON TIMER DISPLAY

SMART HELP

Remember, be sure you

have set the television’s

clock with the correct current time.

(Refer to page 7 to set the Clock Manually or page 2 of the Quick Use Guide to set the Clock Automatically using the Smart Clock feature.)

BEGIN

LOCATOR

POWER

AV ON/OFF POSITION FREEZE

VCR

ACC

SWAP SOURCE PIP CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

CC STATUS CLOCK A/CH

EXIT

TV/VCR

SLEEP TUNER

VCR

RECORD

A/B

MULTI

MEDIA

INCREDIBLE

STEREO

FEATURES

SmartLock

BLOCK CHANNEL SETUP CODE

FEATURES

TIMER SmartLock DNR INCR. PICT. PIP

BLOCK CHANNEL SETUP CODE

FEATURES

PICTURE SOUND FEATURES INSTALL

TIMER SmartLock DNR INCR. PICT. PIP

. .

TIMER SmartLock DNR INCR. PICT. PIP

TIME ACTIVATE CHANNEL TUNER

FEATURES

SmartLock

BLOCK CHANNEL SETUP CODE

----

Enter current access code

FEATURES

SmartLock

BLOCK CHANNEL SETUP CODE

xxxx Code correct

FEATURES

SmartLock

BLOCK CHANNEL SETUP CODE

----

Next enter your new access code

FEATURES

SmartLock

BLOCK CHANNEL SETUP CODE

xxxx Code changed

USING THE SMART LOCK (SETUP CODE) CONTROL

Parents - it isn’t possible for your child to unblock a channel without knowing your access code or changing it to a new one. If your code changes, and you didn’t change it, then you know it’s been altered by someone else and block channel have been viewed.

mart Lock allows parents to

block out, or “censor” any channels they think children should not watch. A channel blocked by the Smart Lock control cannot be viewed until a correct access code is used to unlock the channel for viewing. First let’s set your Smart Lock access code:

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR DOWN ■

button twice to select the FEA-

TURES menu.

Press the CURSOR RIGHT

shift to the left, then CURSOR

DOWN■to highlight the SMART LOCK control.

Press the CURSOR RIGHT

play left, then CURSOR DOWN

■

to highlight SETUP CODE.

Press the CURSOR RIGHT

access code” will appear within the menu.

Press 0, 7, 1, 1 on the remote.

“XXXX” shows on the SETUP CODE display as you press the NUMBER buttons. “XXXX Code correct” will appear.

“Next enter your new access

code” shows on the screen. Press

the NUMBER buttons on the

remote to enter a NEW four digit code.

“XXXX Code changed” shows on the screen to let you know the new code has been set.

NOTE: The 0,7,1,1 access code shown on this page is the default code or way to reset the code when the current access code is not known.

Continue to the next page to learn how to block channels from viewing.

BEGIN

LOCATOR

POWER

AV ON/OFF POSITION FREEZE

VCR

ACC

SWAP SOURCE PIP CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

CC STATUS CLOCK A/CH

EXIT

TV/VCR

SLEEP TUNER

VCR

RECORD

A/B

MULTI

MEDIA

INCREDIBLE

STEREO

FEATURES

SmartLock

BLOCK CHANNEL SETUP CODE

FEATURES

TIMER SmartLock DNR INCR. PICT. PIP

BLOCK CHANNEL SETUP CODE

FEATURES

PICTURE SOUND FEATURES INSTALL

TIMER SmartLock DNR INCR. PICT. PIP

. .

TIMER SmartLock DNR INCR. PICT. PIP

TIME ACTIVATE CHANNEL TUNER

FEATURES

SmartLock

BLOCK CHANNEL SETUP CODE

----

Enter current access code

FEATURES

SmartLock

BLOCK CHANNEL SETUP CODE

xxxx Code correct

FEATURES

SmartLock

BLOCK CHANNEL SETUP CODE

CHANNEL 22 ALLOWED

Select channel Please press > to block viewing

FEATURES

SmartLock

BLOCK CHANNEL SETUP CODE

CHANNEL 22 BLOCKED

Select channel Please press < to allow viewing

USING THE SMART LOCK (BLOCK CHANNEL) CONTROL

Note: You can also block out the use of the A/V external inputs on the rear of the TV. This stops the viewing of VCR, DVD, etc., programs which can be shown through the A/V Input jacks. Select AV 1, AV 2, or SVID-R, MM1, MM2, MM3, and select block.

fter your personal access code

has been set (see previous page), you are now ready to select the channels you want to block out or censor.

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR DOWN ■

button twice to select the FEA-

TURES menu.

Press the CURSOR RIGHT

shift to the left, then CURSOR

DOWN■to highlight the SMART LOCK control.

Press the CURSOR RIGHT

play left, the BLOCK CHANNEL control will be highlighted.

Press the CURSOR RIGHT

access code” will appear within the menu.

Enter the correct access code

number. “XXXX” shows on the SETUP CODE display as you press the NUMBER buttons. “XXXX Code correct” will appear.

Press the CHANNEL (+) or

(–) buttons (or NUMBER buttons)

to select the channel you want to block.

Press the CURSOR RIGHT

the channel, or the CURSOR LEFT §§ button to allow viewing of the channel.

Repeat steps 5 through 7 for any other channels you wish to block from viewing.

BEGIN

LOCATOR

POWER

AV ON/OFF POSITION FREEZE

VCR

ACC

SWAP SOURCE PIP CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

CC STATUS CLOCK A/CH

EXIT

TV/VCR

SLEEP TUNER

VCR

RECORD

A/B

MULTI

MEDIA

INCREDIBLE

STEREO

FEATURES

TIMER SmartLock DNR INCR. PICT. PIP

OFF

FEATURES

TIMER SmartLock DNR INCR. PICT. PIP

FEATURES

TIMER SmartLock DNR INCR. PICT. PIP

. .

FEATURES

PICTURE SOUND FEATURES INSTALL

TIMER SmartLock DNR INCR. PICT. PIP

. .

TIMER SmartLock NR CONTRAST + PIP

TIME ACTIVATE CHANNEL TUNER

ue many reason such as poor

cable reception, the picture can sometime appear slightly “speckled” (noise in the picture). The DNR (Dynamic Noise Reduction) control can help eliminate this type of interference and improve the quality of the picture.

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR DOWN ■

button twice to select the FEATURES menu.

Press the CURSOR RIGHT

shift to the left, TIMER will be highlighted.

Press the CURSOR DOWN

■

to highlight the DNR control.

Press the CURSOR RIGHT

DNR option area.

CURSOR DOWN ■ buttons to turn the DNR feature ON or OFF.

TURNING ON THE DYNAMIC NOISE REDUCTION (PICTURE) CONTROL

BEGIN

+ 33 hidden pages