Quick Start Guide
MCM772
What’s in the Box?
You should Þ nd these items upon opening the box.
FM antenna
Quick Start Guide
Control cable
User Manual
Remote Control
Power cord
Pull out the plastic protective sheet before use.
1
Connect the speaker cables.
2
Connect the control cable.
4
Speaker
(right)
AC power
3
Connect the FM antenna.
4
Connect the power cord of the system.
1
2
FM antenna
Speaker
(left)
3
Tip
See the User Manual for how to connect
other equipment to this system.
Setting the clock
IMPORTANT!
– To set clock in the Eco Power mode, press and hold STANDBY-ON 2 on the set for 3 seconds or more to switch to normal
standby mode Þ rst before proceeding with the procedures below.
1
In standby mode, press and hold CLOCK on the remote control.
2
When the hour digits ß ash, turn VOLUME on the system or press VOL+/- on the remote
control to set the hours.
3
Press
CLOCK again and the minute digits ß ash. Then turn VOLUME on the system or press
VOL+/- on the remote control to set the minutes.
4
Press
CLOCK again to conÞ rm the time setting.