Philips MCM726 12 Quick Start Guide

Page 1
MCM726
What’s in the Box?
You should find these items upon opening the box.
FM antenna MW antenna Remote Control
2
1
Quick Start Guide
Quick Start Guide
User Manual
User manual
Pull out the plastic protective sheet before use.
Page 2
1
Connect the speaker cables.
2
Connect the MW and FM antennas.
3
Connect the power cable of the system.
Tip
See the User Manual for how to connect other equipment to this system.
MW loop
antenna
Speaker
(right)
D
C
FM wire antenna
B
AC power cord
A
Speaker
(left)
Page 3
Setting the clock
IMPORTANT! – To set clock in the Eco Power mode, press and hold STANDBY-ON/ECO
22
2
on the set for 3 seconds or more to switch to normal standby
POWER
22
mode first before proceeding with the procedures below.
1
In standby mode, press and hold RDS/CLOCK SET on the system.
2
When the hour digits flash, turn the VOLUME control on the front panel to set the hours.
3
Press RDS/CLOCK SET again and the minute digits flash. Then turn the
VOLUME control on the front panel to set the minutes.
4
Press RDS/CLOCK SET again to confirm the time setting.
C
Enjoy
Playing a disc
1
Press OPEN/CLOSEç to open the disc tray and load in a disc, then press the same button again to close the disc tray.
Make sure the label side of the disc is facing up.
2
Press ÉÅ to start playback.
3
To stop playback, press 9.
d
o
i
r
e
p
d
e
g
D
o
n
o
t
p
u
t
i
n
d
n
o
l
o
r
p
a
r
o
t
h
g
i
l
i
n
r
u
e
s
c
t
Page 4
C
Enjoy
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1), USB flash players work with this Hi-Fi system).
1
Insert the USB device’s USB plug into the socket on the set.
(USB 2.0 or USB1.1), memory cards (requires an additional card reader to
2
Press SOURCE once or more to select USB (or USB on the remote control).
3
Play the USB’s audio files as you do with the albums/tracks on a CD.
Programming and tuning to radio stations
1
Press SOURCE repeatedly to select the tuner source.
2
Press PROGRAM for more than two seconds to program all available stations in order of waveband.
3
Press 4 or 3 until the desired preset station is displayed.
Tip
Detailed playback features and additional functions are described in the accompany owner's manual.
C Royal Philips Electronics N.V. 2007
All rights reserved.
http://www.philips.com
PDCC-JS/JW-0608
GB
Loading...