Quick start guide
MCM710
What’s in the Box?
You should find these items upon opening the box.
FM antenna
Quick Start Guide
1
Quick Start Guide User Manual
Remote Control
2
User Manual
Pull out the plastic
protective sheet
before use.
1
Connect the speaker cables.
2
Connect the FM antenna.
3
Connect the power cord of the system.
AC power cord
FM antenna
Speaker
(right)
Tip
See the User Manual for how to
connect other equipment to this
system.
Setting the clock
IMPORTANT!
– To set clock in the Eco Power mode, press and hold ECO POWER/STANDBY-ON
seconds or more to switch to normal standby mode first before proceeding with the procedures below.
2
on the set for 3
1
In standby mode, press and hold CLOCK on the remote.
2
When the hour digits flash, turn VOLUME-/+ on the system or press VOL+/- on the
remote to set the hours.
Speaker
(left)
3
Press CLOCK again and the minute digits flash. Then turn VOLUME-/+ on the system or
press VOL+/- on the remote to set the minutes.
4
Press CLOCK again to confirm the time setting.
Playing a disc
1
Press SOURCE on the system to select DISC or press CD on the
remote.
2
Press ç to open the CD compartment.
3
Insert a disc with the printed side facing up. Press ç again to close
the compartment.
4
Playback will start automatically. If not press ÉÅ.
5
To stop playback, press 9 .
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players
work with this Hi-Fi system).
1
Insert the USB device’s USB plug into the socket on the set.
(USB 2.0 or USB1.1), memory cards (requires an additional card reader to
2
Press SOURCE once or more (or USB on the remote control) to select USB.
3
Play the USB’s audio files as you do with the albums/tracks on a CD.
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
C Royal Philips Electronics N.V. 2007
All rights reserved.
PDCC-FJ/JW-0748
Loading...