Page 1
Quick Start Guide
MCD129
What’s in the Box?
You should find these items upon opening the box.
Composite video cable
AC power cord
DIN cable
Quick Start Guide
Quick start guide
DISC AUX
SLOWDISPLAY
OSD
SUBTITLE REPEAT A-B SHUFFLE
SYSTEM MENU
DISC MENU
OK
AUDIO MUTE
1
2
4
5
7
8
ANGLEPROG
0
Remote control with one
CR2025 battery loaded
1
+
VOL
GOTO
3
ZOOM
6
DSC
9
DBB
2
User Manual
CR2025
Remove the insulation plastic tab
before use
User manual
Page 2
Important!
– This set can only be operated after the
supplied DIN cable has been connected.
Tips
– See the User Manual for other TV
connection options.
–For connecting to a Progressive Scan
TV, refer to the user manual for proper
connections and detailed setup.
1
Connect the speaker wires of the right speaker and subwoofer to the
left speaker.
2
Connect the left speaker and the DVD player by using the supplied
DIN cable.
3
Connect the DVD player to your TV by using the supplied composite
video cable.
4
Connect the supplied power cord to the left speaker and the wall socket.
TV
Speakers
Right Speaker
Subwoofer
1 1
AC Power Cord
2
––
Black
White
+
Red
Green
4
3
Page 3
Setting up the TV
1
Press SOURCE (DISC on the remote) to select disc source.
2
Turn on the TV and set it to the correct Video In channel.
DISC AUX
OSD
SUBTITLE REPEAT A-B SHUFFLE
SYSTEM MENU
DISC MENU
OK
AUDIO MUTE
SLOWDISPLAY
+
VOL
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support
progressive signals or the video cables are not connected accordingly, see the user
manual for proper progressive scan setup or deactivate the progressive scan
feature as below:
1) Turn off your TV progressive scan mode or turn on to interlaced mode.
2) Select “OFF” in PROGRESSIVE menu of the system setup menu to turn off
progressive scan, then press SYSTEM MENU on the remote to exit the system
menu. Or, to turn off progressive scan, you may also first open the disc door,
then hold down
remote control.
SETUP MENU
AUDIO
SUBTITLE
DISC MENU
GOTO LANGUAGE SETUP PAGE
™ on the front panel, and press numeric key “1” on the
ENGLISH
ENGLISH
ENGLISH
TV Display
TV TYPE
PROGRESSIVE
SCREEN SAVER
GOTO PICTURE SETUP PAGE
GOTO FEATURE SETUP PAGE
Wide
MULTI.SYSTEM
OFF
ON
8 ADULT
CHANGE
ENGLISH
RESET
NIGHT MODE
TEST TONE
GOTO SOUND SETUP PAGE
OFF
AUTO
SYSTEM MENU
1
2
3
4
5
6
7
8
9
ANGLEPROG
0
DISC AUX
OSD
SUBTITLE REPEAT A-B SHUFFLE
SYSTEM MENU
DISC MENU
OK
AUDIO MUTE
GOTO
ZOOM
DSC
DBB
SLOWDISPLAY
+
VOL
Tip
See chapters "Getting Started" and "DVD menu operations" in the
User Manual for detailed descriptions.
1
4
7
GOTO
2
3
ZOOM
5
6
DSC
8
9
ANGLEPROG
DBB
0
Page 4
Playing a disc
1
Push OPEN /CLOSEç to open the disc door.
2
Load in a disc with the label side facing up, then close the disc door.
3
Playback will start automatically. If not, pressÉÅ.
4
To stop playback, press 9.
Notes for the remote control:
– First, select the source you wish to
control by pressing one of the source
select keys on the remote control
(DISC or AUX, for example).
– Then select the desired function
(
2;, í, ë
for example).
Tip
Detailed playback features and
additional functions are described in the
accompanied user manual.
2006 C Koninklijie Philips Electronics
N.V. All rights reserved.
http://www.philips.com
PDCC-JH-0624
Loading...