Page 1
Quick Start Guide
MCD107
What’s in the Box?
You should fi nd these items upon opening the box.
Remote Control
Quick Start Guide
Audio/video cable MP3 link cable
User Manual
Page 2
1
Connect the speaker cables.
2
Connect the AC power cord to the wall
socket.
FM antenna
Tip
See the User Manual for how to connect
other equipment to this apparatus.
Speaker
(right)
AC power
Set clock
1
In standy-by mode, press and hold CLOCK/DISPLAY to activate the clock setting mode.
»
The 12 hour or 24 hour format is displayed.
2
Press PROG repeatedly to select 12 hour or 24 hour format.
3
Press CLOCK/DISPLAY to confi rm.
The hour digits are displayed and begin to blink.
»
4
Press 5/6 to set the hour.
Speaker
(left)
5
Press CLOCK/DISPLAY to confi rm.
»
The minute digits are displayed and begin to blink.
6
Press 5/6 to set the minute.
7
Press CLOCK/DISPLAY to confi rm.
Page 3
Play discs
1
Press DISC to select the disc source.
2
Press / to open the disc compar tment.
3
Insert a disc with the printed side facing up, then close the disc door.
Play star ts automatically.
»
To stop play, press • 9 .
Play from USB devices
With the apparatus, you can use USB fl ash memory (USB 2.0 or USB1.1),
USB fl ash players (USB 2.0 or USB1.1)
work with this apparatus).
1
Inser t the USB plug of a USB device into the socket.
,
memory cards (requires an additional card reader to
2
Press USB .
» 2; .
Play star ts automatically. If not, press
Page 4
Programming and tuning to radio stations
1
Press TUNER to select FM.
2
Press and hold PROG/ANGLE for more than 2 seconds.
»
All available stations are programmed in the order of waveband reception strength.
The fi rst programmed radio station is broadcast automatically. »
3
Press ¡ or ™ until the desired preset station is displayed.
Tip
Detailed playback features and additional functions are described in the accompanied
owner's manual.
Royal Philips Electronics N.V. 2009
C
All rights reserved.
http://www.philips.com
MCD107_51_QSG_V1.0
Loading...