Philips lmx58 DATASHEETS
Philips Semiconductors Product specification
NE/SA/SE532/
LM158/258/358/A/2904
Low power dual operational amplifiers
1
1995 Nov 27 853-1241 16050
DESCRIPTION
The 532/358/LM2904 consists of two independent, high gain,
internally frequency-compensated operational amplifiers internally
frequency-compensated operational amplifiers designed specifically
to operate from a single power supply over a wide range of voltages.
Operation from dual power supplies is also possible, and the low
power supply current drain is independent of the magnitude of the
power supply voltage.
UNIQUE FEATURES
In the linear mode the input common-mode voltage range includes
ground and the output voltage can also swing to includes ground
and the output voltage can also swing to ground, even though
operated from only a single power supply voltage. The unity gain
cross frequency is temperature-compensated. The input bias current
is also temperature-compensated.
FEATURES
•Internally frequency-compensated for unity gain
•Large DC voltage gain—100dB
•Wide bandwidth (unity gain)—1MHz (temperature-compensated)
PIN CONFIGURATIONS
1
2
3
4 5
6
7
8
– +
+
–
A B
V+
OUTPUT B
INVERTING INPUT B
NON INVERTING INPUT B
OUTPUT A
INVERTING INPUT A
NON INVERTING INPUT A
V–
D, FE, N Packages
SL00282
Figure 1. Pin Configuration
•Wide power supply range single supply—3V
DC
to 30VDC or dual
supplies—±1.5V
DC
to ±15V
DC
•Very low supply current drain (400µA)—essentially independent of
supply voltage (1mW/op amp at +5V
DC
)
•Low input biasing current—45nA
DC
temperature-compensated
•Low input offset voltage—2mV
DC
and offset current—5nA
DC
•Differential input voltage range equal to the power supply voltage
•Large output voltage—0V
DC
to V+ 1.5VDC swing
EQUIVALENT CIRCUIT
v
+
6
µ
A
100µ
A
Q2 Q3
Q1 Q4
INPUTS
+
Q8 Q9
C
C
Q10
6µ
A
Q5
Q7
Q6
R
SC
OUTPUT
Q13
Q12
Q11
50µA
SL00283
Figure 2. Equivalent Circuit
Philips Semiconductors Product specification
NE/SA/SE532/
LM158/258/358/A/2904
Low power dual operational amplifiers
1995 Nov 27
2
ORDERING INFORMATION
DESCRIPTION TEMPERATURE RANGE ORDER CODE DWG #
8-Pin Plastic Small Outline (SO) Package 0 to +70°C NE532D SOT96-1
8-Pin Plastic Dual In-Line Package (DIP) 0 to +70°C NE532N SOT97-1
8-Pin Plastic Small Outline (SO) Package -40°C to +85°C SA532D SOT96-1
8-Pin Plastic Dual In-Line Package (DIP) -40°C to +85°C SA532N SOT97-1
8-Pin Ceramic Dual In-Line Package (CERDIP) -40°C to +85°C SA532FE 0580A
8-Pin Plastic Small Outline (SO) Package -40°C to +125°C LM2904D SOT96-1
8-Pin Plastic Dual In-Line Package (DIP) -40°C to +125°C LM2904N SOT97-1
8-Pin Ceramic Dual In-Line Package (CERDIP) -55°C to +125°C LM158FE 0580A
8-Pin Plastic Dual In-Line Package (DIP) -25°C to +125°C LM258N SOT97-1
8-Pin Plastic Small Outline (SO) Package -25°C to +125°C LM258D SOT96-1
8-Pin Plastic Small Outline (SO) Package 0 to +70°C LM358D SOT96-1
8-Pin Plastic Dual In-Line Package (DIP) 0 to +70°C LM358N SOT97-1
8-Pin Plastic Dual In-Line Package (DIP) 0 to +70°C LM358AN SOT97-1
8-Pin Plastic Small Outline (SO) Package 0 to +70°C LM358AD SOT96-1
8-Pin Plastic Dual In-Line Package (DIP) -55°C to +125°C SE532N SOT97-1
8-Pin Ceramic Dual In-Line Package (CERDIP) -55°C to +125°C SE532FE 0580A
ABSOLUTE MAXIMUM RATINGS
SYMBOL PARAMETER RATING UNIT
V
S
Supply voltage, V+ 32 or ±16 V
DC
Differential input voltage 32 V
DC
V
IN
Input voltage -0.3 to +32 V
DC
P
D
Maximum power dissipation
T
A
=25°C (Still air)
1
FE package
N package
D package
780
1160
780
mW
mW
mW
Output short-circuit to GND
5
V+<15 VDC and TA=25°C Continuous
Operating ambient temperature range
NE532/LM358/LM358A 0 to +70 °C
T
A
LM258 -25 to +85 °C
LM2904 -40 to +125 °C
SA532 -40 to +85 °C
SE532/LM158 -55 to +125 °C
T
STG
Storage temperature range -65 to +150 °C
T
SOLD
Lead soldering temperature (10sec max) 300 °C
NOTES:
1. Derate above 25°C, at the following rates:
FE package at 6.2mW/°C
N package at 9.3mW/°C
D package at 6.2mW/°C
Loading...