Philips HR7639J Service Manual
Cucina ivory Food processor
HR7639 /J
HR7640 /J
Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
REPAIR INSTRUCTIONS
- No specific issues
ASSEMBLY & DISASSEMBLY ADVICE
- No specific issues
OPTIONAL (accessories)
- HR2945 = Mill
Capacity cup : 200 ml effective
TECHNICAL INFORMATION
- The food processor is equipped with mechanical and
thermal safety switches.
- Motor power consumption : 600 W
- Kneading capacity : max. 400 g of flour
max. 680 g of dough
- Voltage & frequency : 220 - 240 V; 50 - 60 Hz
120 V; 50 - 60 Hz
- Cordset : 150 cm
- Speed setting : 2 speeds + pulse
- Bowl capacity : 1,8 l dry ingredients
1,2 l liquids
- Blender beaker : 1,5 l total
1,25 l effective
- Dimensions fancy box : 433 x 248 x 414
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
03/04
TECHNICAL INFORMATION
HR7639 /J & HR7640 /J
Automatic resetable thermal cut-out
- In order to avoid an hazardous situation due to in advertent
resetting of the thermal cut-out, this appliance must not be
supplied through a timer.
- To prevent damage due to overheating, the appliance has
been equipped with an automatic cut-out system.
This system will automatically cut off the power supply
when the appliance overheats.
If the appliance suddenly stops running:
- Unplug the appliance
- Press the button ‘pulse / 0’
- Let the appliance cool down for 60 minutes
- Plug the appliance in again
- Switch the appliance on again
Safety Mill HR2945
- Assemble the mill (bowl and knife unit) before it can be
assembled onto the blender motor unit.
Safety lock
- The motor unit as well as the lid have been provided with
marks. The appliance will only function if the arrow on the
motor unit is placed directly opposite the mark on the lid.
- If both the blender and the bowl have been correctly
mounted, only the blender will function.
- For using the bowl, the blender jar has to be removed from
the appliance and the screwcap has to be attached.
Otherwise only the blender will work.
Cleaning
- The bowl, lid of the bowl, pusher and accessories can also
be washed in the dishwasher.
- The cover with insert storage and the blender jar are not
dishwasher proof.
Important:
- If the appliance is used without the blender jar, the
appliance will not function if the screw cap has not been
screwed onto the attaching hole for the blender.
MAINS
Circuit diagram without accessorie(s)
R
brown
P
OFF
1
2
C
orange
black
blue
Change-over switch
in braking position
Thermal cut-out
blue
Upper-switch
NO
NC
NO
Lower-switch
white
yellow
Rotor
MAINS
Circuit diagram with accessorie(s)
P
R
brown
OFF
1
2
C
orange
black
blue
blue
Upper-switch
NO
NC
NO
Lower-switch
Change-over switch
in braking position
Thermal cut-out
white
Rotor
yellow
2-5
Loading...