Philips HR7639 Service Manual

Cucina Food processor

HR 7639

Service
Information

!

Philips Domestic Appliances and Personal Care

Service Manual 4322 277 00599 is herewith cancelled

Service Manual

PRODUCT INFORMATION

The food processor is equipped with mechanical and ther­mal safety switches.

Motor power consumption : 450 W
Kneading capacity : max. 400 g of fl our

max. 680 g of dough
Voltage & frequency : 220-240 V / 120 V; 50-60 Hz
Cordset : 150 cm
Speed setting : 2 speeds + pulse
Bowl capacity : 1,8 l dry ingredients

1,2 l liquids
Blender beaker : 1,5 l total

1,25 l effective
Dimensions fancy box : 433 x 248 x 414

Accessoires : HR 2945 = Mill
Capacity cup : 200 ml effective

SERVICE INFORMATION

Automatic resetable thermal cut-out

- In order to avoid an hazardous situation due to in advert­ent resetting of the thermal cut-out, this appliance must
not be supplied through a timer.

- To prevent damage due to overheating, the appliance
has been equipped with an automatic cut-out system.
This system will automatically cut off the power supply
when the appliance overheats.

- If the appliance suddenly stops running:

- Unplug the appliance

- Press the button ‘pulse / 0’

- Let the appliance cool down for 60 minutes

- Plug the appliance in again

- Switch the appliance on again

Safety Mill HR 2945

- Assemble the mill (bowl and knife unit) before it can be
assembled onto the blender motor unit.

Safety lock

- The motor unit as well as the lid have been provided with
marks. The appliance will only function if the arrow on the
motor unit is placed directly opposite the mark on the lid.

- If both the blender and the bowl have been correctly
mounted, only the blender will function.

- For using the bowl, the blender jar has to be removed
from the appliance and the screwcap has to be attached.
Otherwise only the blender will work.

Cleaning

- The bowl, lid of the bowl, pusher and accessories can also
be washed in the dishwasher.

- The cover with insert storage and the blender jar are not
dishwasher proof.

Important:

- If the appliance is used without the blender jar, the appli­ance will not function if the screw cap has not been
screwed onto the attaching hole for the blender.

This product meets the requirements regard­ing interference suppression on radio and TV.

After the product has been repaired, it should
function properly and has to meet the safety
requirements as offi cially laid down at this
moment.

Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification

4322 277 00800
02/02

HR 7639

1 9965 000 06960 Blender cover printed
2 9965 000 06964 Blender coupling assy
3 9965 000 06764 Housing one colour printed
9965 000 12318 Housing one colour printed - New
4 9965 000 06776 Rubber piece

5 9965 000 06787 Motor assy 110 - 127 V
9965 000 06789 Motor assy 220 - 240 V
6 9965 000 06774 Flex
7 9965 000 06781 Main switch assy
8 9965 000 06972 Coupling fork

9 9965 000 06970 Coupling lever assy
10 9965 000 06777 Air tunnel assy
11 9965 000 06772 Switch lever assy
12 9965 000 06814 Motor screw assy
13 9965 000 06912 Rubber sealing ring

14 9965 000 06914 Locking piece
15 9965 000 06916 Drive shaft
16 9965 000 06817 Bearing disc
17 9965 000 06819 Locking plate assy
18 9965 000 06815 Rubber tube

19 9965 000 06967 Spindle assy
20 9965 000 06974 Compression spring
21 9965 000 07073 Coupling piece
22 9965 000 06818 Tooth belt
23 9965 000 06962 Drive wheel assy

24 9965 000 06802 Metal mounting plate assy
25 9965 000 06816 Bottom assy

29 9965 000 06927 Spatula
30 9965 000 06925 Special cover
31 9965 000 06924 Mono pusher
32 9965 000 06922 Bearing insert
33 9965 000 06920 Bowl cover assy

9965 000 12316 Bowl cover assy - New
34 9965 000 06919 Bowl
9965 000 12314 Bowl - New
35 4203 065 61570 Granulating insert (opt.)
36 4203 065 61550 Shredding insert fi ne

37 4203 065 61560 Shredding insert medium
38 4203 065 62310 Shredding insert coarse (opt.)
39 9965 000 06943 Juliene/Chinese shredding insert (opt.)
40 4203 065 61530 Slicing insert fi ne (opt.)
41 4203 065 61540 Slicing insert medium

42 9965 000 06940 Insert carier assy
43 9965 000 06935 Kneading knife
44 9965 000 06933 Metal knife assy
45 9965 000 06931 Whisk
46 9965 000 06929 Accessory holder assy

47 9965 000 12160 Soybean / Fruit fi lter
48 9965 000 06977 Jar lid
49 4822 418 10418 Jar assy
50 4822 418 10417 Bowl only
51 4822 690 10207 Mill assy

4822 267 31591 wire connector for two wires
9965 000 01056 wire connector for three wires

NOTE:

If you have to order the spare parts 3, 33 or 34 you have to look at the production date of the appliance!

In case of servicing one of the above mentioned parts for appliances with a productiondate earlier than 02041 you have to order
the following 12NC - 9965 000 12307 because of technical changes, which don´t allow a compatibility between old and new
parts. By ordering this 12NC you will receive all 3 mentioned parts as an assy.

For appliances with a productiondate later than 02041 you can order these parts seperately with the 12NC´s mentioned in the
Service Manual (remark New).

MAINS

Circuit diagram without accessorie(s)

R

brown

P

OFF

1

2

C

orange

black

blue

Change-over switch

in braking position

Thermal cut-out

blue

Upper-switch

NO

NC

NO

Lower-switch

white

yellow

MAINS

Rotor

Circuit diagram with accessorie(s)

P

R

brown

OFF

1

2

C

orange

black

blue

blue

Upper-switch

NO

NC

NO

Lower-switch

Change-over switch

in braking position

Thermal cut-out

white

yellow

Rotor