Philips HR 7600, HR 7605 Service Manual

Food processor

HR7600
HR7605

Philips Domestic Appliances and Personal Care

Service Manual

PRODUCT INFORMATION

- This product meets the requirements regarding
interference suppression on radio and TV.

- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.

TECHNICAL INFORMATION

- Motor consumption : 350 Watt

- Voltage & frequency : 220 - 240 V / 50 - 60 Hz

- Cordset : 150 cm double insulated
with moulded plug

- Speed setting : 1 speed + pulse

- Bowl max. capacity : 2.1 l dry ingredients

1.5 l liquids

- Bowl : not suitable for the micro wave

- Ingredients : max. 80 °C / 175 °F

- Dimensions product : 230 x 180 x 235 mm

- Weight product : 1.4 kg

This appliance is equipped with an automatic thermal
cut-out system. This system will automatically cut off the
power supply to the appliance in case of overheating.

If the appliance suddenly stops running:

1. Pull the mains plug out of the socket.

2. Set the speed control to ‘0’.

3. Let the appliance cool down for 60 minutes. Then the

appliance is ready for use again.

4. Put the mains plug back into the socket.

5. Switch the appliance on again.

Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification

03/07

HR7600 / HR7605

DISASSEMBLY- AND RE-ASSEMBLY ADVISE

- No specific issues

REPAIR INSTRUCTIONS

Use grease 4822 390 20004 to lubricate the parts of the
gearbox.

2

3

3,50 ± 0,15

OPTIONAL (accessories)

- No specific issues

Safety
switch

Pulse - 0 - 1

Microswitch

Note:

Support the rotorshaft to prevent forces on the motor
bearings, during the assembly of the pinion on the rotorshaft.

AC

Thermal
cut-out

C

M

2-4