Philips HFL3008D, HFL3008W User Manual
EN User Manual
Register your product and get support at
www.philips.com/welcome
HFL3008D/W
Contents
1 Important 3
Safety 3
Care 4
Legal 5
Sustainability 7
Help and support 8
2 Use your TV 9
TV controls 9
Watch TV 10
View programme guide 14
Play multimedia files 14
3 Use more of your TV 16
Professional mode 16
Play games 20
View Text 21
Set locks and timers 22
4 Change your TV settings 24
Picture and sound 24
Channels 26
Language settings 28
Universal access settings 29
Other settings 30
Reset all 30
5 Connect your TV 31
About cables 31
Connect antenna 32
Connect devices 32
Connect more devices 39
Watch connected devices 40
Set up EasyLink devices 41
Connect a CAM (Conditional Access
Module) 43
6 Troubleshooting 44
Display resolutions 47
Multimedia 48
Connectivity 52
Supported TV mounts 53
Help version 53
8 Index 54
General issues 44
Channel issues 44
Picture issues 45
Sound issues 45
Connection issues 46
Contact Philips 46
7 Specifications 47
Power and reception 47
Display and sound 47
EN 2
English
1 Important
Safety
Precautions
Read and understand all instructions before
you use your TV. If damage is caused by
failure to follow the instructions, the
warranty does not apply.
Risk of electric shock or fire!
Never expose the TV to rain or water.
Never place liquid containers, such as
vases, near the TV. If liquids are spilled
on or into the TV, disconnect the TV
from the power outlet immediately.
Contact Philips Consumer Care to have
the TV checked before use.
Never place the TV, remote control or
batteries near naked flames or other
heat sources, including direct sunlight.
To prevent the spread of fire, keep
candles or other flames away from the
TV, remote control and batteries at all
times.
Never insert objects into the ventilation
slots or other openings on the TV.
Never expose the remote control or
batteries to rain, water or excessive
heat.
Avoid force coming onto power plugs.
Ensure that the power plug is fully
inserted into the power socket. Loose
power plugs can cause arcing or fire.
When the TV is swivelled, ensure that
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.
To disconnect the TV from the mains
power, the power plug of the TV must
be disconnected. When disconnecting
the power, always pull the power plug,
never the cord. Ensure that you have
full access to the power plug, power
cord and outlet socket at all times.
Risk of damage to the TV!
Two people are required to lift and
carry a TV that weighs more than 25kg
or 55lbs.
When stand mounting the TV, use only
the supplied stand. Secure the stand to
the TV tightly. Place the TV on a flat,
level surface that can support the
combined weight of the TV and the
stand.
When wall mounting the TV, use only a
wall mount that can support the weight
of the TV. Secure the wall mount to a
wall that can support the combined
weight of the TV and wall mount. TP
Vision Netherlands B.V. bears no
responsibility for improper wall
mounting that result in accident, injury
or damage.
If you need to store the TV,
disassemble the stand from the TV.
Never lay the TV on its back with the
stand installed.
Before you connect the TV to the
power outlet, ensure that the power
voltage matches the value printed on
the back of the TV. Never connect the
TV to the power outlet if the voltage is
different.
Parts of this product may be made of
glass. Handle with care to avoid injury
and damage.
Risk of injury to children!
Follow these precautions to prevent the TV
from toppling over and causing injury to
children:
Never place the TV on a surface
covered by a cloth or other material
that can be pulled away.
Ensure that no part of the TV hangs
over the edge of the surface.
Never place the TV on tall furniture,
such as a bookcase, without anchoring
both the furniture and TV to the wall
or a suitable support.
EN 3
Educate children about the dangers of
climbing on furniture to reach the TV.
Risk of swallowing batteries!
The product/remote control may
contain a coin-type battery, which can
be swallowed. Keep the battery out of
reach of children at all times!
Risk of overheating!
Never install the TV in a confined
space. Always leave a space of at least 4
inches or 10 cm around the TV for
ventilation. Ensure that curtains or
other objects never cover the
ventilation slots on the TV.
Risk of injury, fire or power cord damage!
Never place the TV or any objects on
the power cord.
Disconnect the TV from the socket and
aerial before lightning storms. During
lightning storms, never touch any part
of the TV, power cord or aerial cable.
Risk of hearing damage!
Avoid using earphones or headphones
at high volumes or for prolonged
periods of time.
Low temperatures
If the TV is transported in temperatures
below 5°C or 41°F, unpack the TV and
wait until the TV temperature matches
room temperature before connecting
the TV to the power outlet.
Avoid stationary images as much as
possible. Stationary images are images
that remain onscreen for extended
periods of time. Stationary images
include onscreen menus, black bars,
time displays, etc. If you must use
stationary images, reduce screen
contrast and brightness to avoid screen
damage.
Placement tips
Position the TV where light does not
shine directly on the screen.
The ideal viewing distance of this TV is
three times its diagonal screen size. For
example, if the diagonal screen size of
the TV is 81 cm / 32", the ideal viewing
distance is ~2.5 m / ~92" from the
front of the screen.
While seated, your eyes should be level
with the centre of the screen.
TV placement
You can apply the best sound settings for
your TV by selecting the TV placement (wall
mount or stand mount).
1. Press .
2. Select [Setup], then press OK.
3. Select [TV settings] > [General settings]
or [TV placement].
4. Select [On a TV stand] or [Wall
mounted], then press OK.
Care
Screen
Risk of damage to the TV screen!
Never touch, push, rub or strike the
screen with any object.
Unplug the TV before cleaning.
Clean the TV and frame with a soft
damp cloth and wipe gently. Never use
substances such as alcohol, chemicals or
household cleaners on the TV.
To avoid deformations and colour
fading, wipe off water drops as soon as
possible.
EN 4
English
Lock the TV
Your TV is equipped with a Kensington
security slot at the base of the TV. To secure
the TV, purchase a Kensington anti-theft lock
(sold separately).
Legal
Notice
2013 © TP Vision Netherlands B.V. All rights
reserved. Specifications are subject to change
without notice. Trademarks are the property
of Koninklijke Philips Electronics N.V or their
respective owners. TP Vision Netherlands
B.V. reserves the right to change products at
any time without being obliged to adjust
earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other
than those specified herein, confirmation of
their validity and suitability must be obtained.
TP Vision Netherlands B.V. warrants that the
material itself does not infringe any United
States patents. No further warranty is
expressed or implied.
TP Vision Netherlands B.V. cannot be held
responsible neither for any errors in the
content of this document nor for any
problems as a result of the content in this
document. Errors reported to Philips will be
adapted and published on the Philips support
website as soon as possible.
Terms of warranty
Risk of injury, damage to TV or void of
warranty! Never attempt to repair the
TV yourself.
Use the TV and accessories only as
intended by the manufacturer.
The caution sign printed on the back of
the TV indicates risk of electric shock.
Never remove the TV cover. Always
contact Philips Customer Care for
service or repairs.
Any operation expressly prohibited in
this manual, or any adjustments and
assembly procedures not
recommended or authorised in this
manual, shall void the warranty.
Pixel characteristics
This LCD/LED product has a high number of
colour pixels. Although it has effective pixels
of 99.999% or more, black dots or bright
points of light (red, green or blue) may
appear constantly on the screen. This is a
structural property of the display (within
common industry standards) and is not a
malfunction.
CE compliance
This product is in compliance with the
essential requirements and other relevant
provisions of Directives 2006/95/EC (Low
Voltage), 2004/108/EC (EMC) and
2011/65/EU (ROHS).
Compliance with EMF
TP Vision Netherlands B.V. manufactures
and sells many products targeted at
consumers which, like any electronic
apparatus, in general have the ability to emit
and receive electromagnetic signals.
EN 5
One of Philips’ leading Business Principles is
to take all necessary health and safety
measures for our products, to comply with
all applicable legal requirements and to stay
well within the Electro Magnetic Field (EMF)
standards applicable at the time of producing
the products.
Philips is committed to develop, produce
and market products that cause no adverse
health effects. TP Vision confirms that, as
long as its products are handled properly for
their intended use, they are safe to use
according to scientific evidence available
today.
Philips plays an active role in the
development of international EMF and safety
standards, enabling Philips to anticipate
further developments in standardisation for
early integration in its products.
Open source
This product contains software licensed
under an open-source licence. For
acknowledgments and licence texts, please
refer to the electronic in-product user
manual. TP Vision Netherlands B.V. hereby
offers to deliver, upon request, a copy of the
complete corresponding source code for the
copyrighted open source software packages
used in this product for which such offer is
requested by the respective licences.
This offer is valid up to three years after
product purchase to anyone in receipt of this
information. To obtain source code, please
send your request in English with product
number to:
"Intellectual Property Department, TP Vision
Netherlands B.V., P.O. Box 80077, 5600 KA
Eindhoven, The Netherlands."
Trademarks and copyrights
Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States and/or
other countries.
Manufactured under licence from Dolby
Laboratories. Dolby and the double D
symbol are trademarks of Dolby
Laboratories.
The terms HDMI and HDMI High-Definition
Multimedia Interface and the HDMI Logo are
trademarks or registered trademarks of
HDMI Licensing LLC in the United States
and other countries.
Kensington and Micro Saver are registered
US trademarks of ACCO World
Corporation with issued registrations and
pending applications in other countries
throughout the world.
Covered by one or more of the following
U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274.
DivX®, DivX Certified® and associated logos
are trademarks of Rovi Corporation or its
subsidiaries and are used under licence.
DivX Certified® to play DivX® video up to
HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital
video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an
official DivX Certified® device which has
passed rigorous testing to verify that it plays
DivX video. Visit divx.com for more
information and software tools to convert
your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This
DivX Certified® device must be registered in
order to play purchased DivX Video-onDemand (VOD) movies. To obtain your
registration code, locate the DivX VOD
section in your device setup menu. Go to
vod.divx.com for more information on how
to complete your registration.
EN 6
English
PlayReady Final Products
Content owners use Microsoft PlayReady™
content access technology to protect their
intellectual property, including copyrighted
content. This device uses PlayReady
technology to access PlayReady protected
content and/or WMDRM-protected content.
If the device fails to properly enforce
restrictions on content usage, content
owners may require Microsoft to revoke the
device’s ability to consume PlayReadyprotected content. Revocation should not
affect unprotected content or content
protected by other content access
technologies. Content owners may require
you to upgrade PlayReady to access their
content. If you decline an upgrade, you will
not be able to access content that requires
the upgrade.
All other registered and unregistered
trademarks are the property of their
respective owners.
Sustainability
Energy efficiency
This TV is designed with energy-efficient
features. To access these features, press the
Green button on the remote control.
Energy saving picture settings: You can
apply a combination of energy saving
picture settings. While you watch TV,
press the Green button and select
[Energy saving]. Then select the
[Energy saving] picture setting.
Screen off: If you only want to listen to
audio from the TV, you can switch off
the TV display. Other functions
continue to operate normally. While
you watch TV, press the Green button
and select [Screen off].
Auto switch off: To conserve energy,
set the TV to switch off automatically
after a period of inactivity. While you
watch TV, press the Green button and
select [Auto switch off]. Then select
the period after which the TV switches
off.
Switch off inactive devices: Switch off
connected EasyLink HDMI-CEC
(Consumer Electronic Control)
compliant devices that are inactive.
While you watch TV, press the Green
button and select [Inactive devices off].
Power management: An advanced
power management helps save the
energy consumed by this TV. To view
how your personalised TV settings
affect the TV's relative power
consumption, press , then select
[Setup] > [Watch demos] > [Active
Control demo].
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European
Directive 2002/96/EC. Please inform yourself
about the local separate collection system
for electrical and electronic products.
Please act according to your local rules and
do not dispose of your old products with
your normal household waste. Correct
disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
EN 7
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal
household waste. Please inform yourself
about the local rules on separate collection
of batteries because correct disposal helps to
prevent negative consequences for the
environment and human health.
Energy label
The European Energy Label informs you on
the energy efficiency class of the product.
The greener the energy efficiency class of
this product is, the lower the energy it
consumes.
On the label, you can find the energy
efficiency class, the average power
consumption of the product in use and the
average energy consumption for 1 year. You
can also find the power consumption values
for the product on the Philips website for
your country at www.philips.com/TV.
Use the Philips connectivity guide
An easy-to-use connectivity guide gives you
guidance on how to connect your TV to
other devices. Visit
http://www.connectivityguide.philips.com.
Search the TV forum
Your question may have already been
answered by the Philips TV community of
users. Visit www.supportforum.philips.com.
Contact Philips
You can contact Philips Consumer Care in
your country for support. The number is
available in the leaflet accompanying this
product or online at
www.philips.com/support.
Before you contact Philips, write down the
model and serial number of your TV. You
can find this information on the back of your
TV or on the TV packaging.
Help and support
Visit the Philips website
Visit the Philips support website at
www.philips.com/support.
On the Philips support website, you can also:
Find answers to Frequently Asked
Questions (FAQ)
Download a printable PDF version of
this user manual
Email us a specific question
Chat online with Philips Consumer
Care (available in certain countries
only)
EN 8
English
2 Use your TV
TV controls
Rear controls
1. (Standby): Switch the TV on or off.
2. CH +/-: Switch to the next or previous
channel.
3. (SOURCE): Watch a connected
device.
4. +/- (Volume): Increase or decrease
volume.
Sensors and indicators
1. Remote control sensor
Point the remote control at the sensor.
Make sure that the line of sight between the
remote control and the TV is not blocked.
Remote control
1. (Standby): Switch the TV on or to
standby.
2. MyChoice: Access customised menu.
3. CLOCK: Access the TV clock.
4. ThemeTV: Access ThemeTV options.
5. TV: Switch source to watch TV.
6. CHANNEL GRID: View the TV
channel list.
7. SOURCE: Watch a connected device.
8. GUIDE: Access TV guide.
9. FORMAT: Change picture format.
10. (Home): Access the Home menu.
11. OK: Confirm an entry or selection.
12. (Navigation buttons): Navigate
through menus and select items.
EN 9
13. LIST: Access the TV channel list.
14. ADJUST: Adjust TV settings.
15. INFO: Display information about
current activity.
16. OPTIONS: Access currently available
options, picture and sound menus.
17. (Back): Return to the previous menu
page or exit from a TV function.
18. CH - / CH +: Change channels.
19. +/-(Volume): Adjust volume.
20. (Mute): Mute or restore audio.
EasyLink controls
If you connect your TV to HDMI-CEC
enabled devices, such as a Blu-ray player or
home theatre, you can control them at the
same time with one remote control. Simply
switch on EasyLink after connection.
Read more about Easylink in Connect your
TV > Set up Easylink devices > Control
devices (Page 42).
On-screen remote control
You can also control connected HDMI-CEC
enabled devices through other buttons that
are available through the on-screen remote
control. Make sure that Easylink is switched
on after connection. Read more about
Easylink in Connect your TV > Set up
Easylink devices > Control devices (Page
42).
To access the on-screen remote control
1. While you watch a connected device,
press OPTIONS.
2. Select [Show remote control], then press
OK.
3. Select an on-screen button, then press
OK.
Watch TV
Switch TV on or off
21. Colour buttons: Select tasks or options.
22. SUBTITLE: Enable or disable subtitles.
23. 0-9 (Numeric buttons): Select TV
channels or enter text.
24. TEXT: Enable or disable text.
EN 10
English
Switch the TV on
Connect the TV to the mains outlet
and switch on the main power.
If the TV is not switched on, the
standby LED remains off. Press on
the TV.
If the standby LED is lit, press on the
remote control.
Note: There is a short delay before the TV
responds.
Tip: If you cannot find your remote control
and want to switch on the TV from standby,
press any button the TV.
Switch TV to standby
Press on the remote control.
The standby LED on the TV switches to red.
Switch off the TV
Press on the TV.
The standby LED switches to off.
Note: Though your TV consumes very little
energy when it is in standby or switched off,
it does use some energy. If you are not going
to use the TV for an extended period of
time, disconnect the TV from the mains plug.
Automatic switch off
You can save energy with this TV's energy
efficiency settings, which are enabled by
default. If there is no user interaction (such
as pressing a remote control button or a
control on the TV) for four hours, the TV
will automatically switch to standby.
To disable automatic switch off
1. While you watch TV, press the Green
button on the remote control.
2. Select [Auto switch off], then press OK.
3. Use the Navigation buttons to select [0
mins], then press OK.
Adjust TV volume
Increase or decrease the TV volume
Press +/- on the remote control.
Press +/- on the TV.
Mute or restore the TV volume
Press on the remote control to
mute the volume.
Press again to restore the volume.
Adjust headphone volume
1. Press .
2. Select [Setup] > [TV settings] > [Sound]
> [Headphone volume], then press OK.
3. Select a level.
Switch TV channels
EN 11
Press CH +/- on the remote control or
TV.
Press the Numeric buttons to enter a
channel number.
Manage favourite channels
You can view all channels or only a list of
your favourite channels.
Create a list of your favourite channels
1. Press LIST.
The channel list is displayed.
2. Select the channel to mark as favourite,
then press OPTIONS.
3. Select [Add/remove favourites], then
press OK.
The selected channel is marked with an
asterisk.
To remove a channel from the favourites list,
select [Add/remove favourites], then press
OK.
Display your list of favourite channels
1. Press LIST, then press OPTIONS.
2. Select [List] > [Favourites] to display
channels in the favourite list.
3. Press OK to confirm.
Manage channel lists
After the channels are installed, you can:
Filter channels.
Switch between antenna and cable
channels.
Rename channels.
Reorder channels.
Lock a channel.
Listen to digital radio.
Filter channels
1. While you watch TV, press LIST.
2. Press OPTIONS, then select [Filter].
3. Select an option, then press OK.
[Digital + Analogue]: Display all
channels in the channels list.
[Digital TV channels]: Display only
digital channels.
[Analogue Channels]: Display only
analogue channels.
[Free + scrambled]: Display all channels
in the channels list.
[Free channels]: Display only free
channels.
[Scrambled channels]: Display only
scrambled channels.
Note: The filtering options may vary
according to your broadcaster.
Switch between antenna and cable channels
You can switch between antenna and cable
channels while you are watching TV.
1. While you watch TV, press .
2. Select [Setup] > [Channel settings] >
[Channel installation] > [Antenna
connection].
3. Select [Antenna (DVB-T)] to watch
antenna channels or [Cable (DVB-C)] to
watch cable channels, then press OK.
Rename channels
When you select a channel, its name
appears. You can change this channel name.
1. While you watch TV, press LIST.
The channel list is displayed.
2. Select the channel to rename, then select
OPTIONS.
3. Select [Rename], then press OK.
The onscreen keyboard is displayed.
4. Press the Navigation buttons to select
each character, then press OK.
5. Once complete, select [Done], then press
OK to confirm.
Reorder channels
After the channels have been installed, you
can reorder the channel list.
1. While you watch TV, press LIST.
The channel list is displayed.
2. Press OPTIONS.
3. Select [Reorder], then press OK.
4. Select the channel to reorder, then press
OK.
5. Press the Navigation buttons to move the
highlighted channel to another location, then
press OK.
6. Once complete, press OPTIONS.
7. Select [Exit reorder], then press OK.
Lock a channel
You can prevent unauthorised access to
channels by locking them.
EN 12
English
1. While you watch TV, press LIST.
The channel list is displayed.
2. Select the channel to lock, then press
OPTIONS.
3. Select [Lock channel], then press OK.
4. If prompted, enter the PIN code.
The channel is marked with a lock icon in
the channel list.
Tip: To watch a locked channel, enter the
PIN code when prompted.
Listen to digital radio
If digital radio channels are available, you can
listen to them. They are installed
automatically when you install the TV
channels.
1. While you watch TV, press LIST.
The channel list is displayed.
2. Press OPTIONS.
3. Select [Filter] > [Radio], then press OK.
4. Select a radio channel, then press OK.
Watch connected devices
Before you can watch a device, connect the
device to the TV. See Connect your TV >
Connect devices (Page 32).
Select a device with SOURCE
1. Press SOURCE.
2. Select a device, then press OK.
Select a device from the Home menu
1. Press .
2. Select [Source], then press OK.
3. Select the device, then press OK.
To add or manage your connected devices,
see Connect your TV > Watch connected
devices > Change device settings (Page 40).
Use picture and sound presets
Your TV comes with predefined picture and
sound settings. You can apply these settings
or customise them.
Select your preferred picture settings
1. While you watch TV, press OPTIONS.
2. Select [Picture and sound] > [Picture
style], then press OK.
3. Select an option, then press OK:
[Personal]: Apply your personalised
picture settings.
[Vivid]: Rich and dynamic settings, ideal
for daytime viewing.
[Natural]: Natural picture settings.
[Standard]: Default settings that suit
most environments and types of video.
[Movie]: Ideal settings for movies.
[Photo]: Ideal settings for photos.
[Energy saving]: Settings that conserve
the most energy.
Select your preferred sound settings
1. While you watch TV, press OPTIONS.
2. Select [Picture and sound] > [Sound
style], then press OK.
3. Select an option, then press OK:
[Personal]: Apply your personalised
sound settings.
[Original]: Settings that suit most
environments and types of audio.
[Movie]: Ideal settings for movies.
[Music]: Ideal settings for listening to
music.
[Game]: Ideal settings for games.
[News]: Ideal settings for spoken audio,
such as the news.
Change picture format
You can change the picture format to suit
the video source.
1. Press FORMAT.
2. Select a picture format, then press OK.
The available picture formats depend on the
video source:
[Auto fill]: Adjust the picture to fill the
screen (subtitles remain visible).
Recommended for minimal screen
distortion but not for HD or PC.
[Auto zoom]: Enlarge the picture to fill
the screen. Recommended for minimal
screen distortion but not for HD or PC.
[Super zoom]: Remove the black bars
on the sides of 4:3 broadcasts. Not
recommended for HD or PC.
[Movie expand 16:9]: Scale 4:3 format
to 16:9. Not recommended for HD or
PC.
EN 13
[Wide screen]: Shows widescreen
format content unstretched. Not
recommended for HD or PC.
[Unscaled]: Provide maximum detail for
PC. Only available when PC mode is
selected in the Picture menu.
[4:3]: Display the classic 4:3 format.
View programme guide
What you can do
You can view channel schedules and
programme synopses for digital TV channels
using programme guides provided by the
broadcasters. The availability of programme
guides is dependent on your broadcaster.
You cannot view a channel's programme
guide information if:
the age rating of the channel is equal or
higher than the age rating set on your
TV.
the channel is locked.
From the broadcaster
Access broadcaster programme guide
1. Press .
2. Select [TV guide], then press OK.
3. If you are viewing the programme guide
for the first time, follow the onscreen
instructions to update the guide.
Customise broadcaster programme guide
You can customise the displayed information
to:
Remind you when programmes start.
Display only preferred channels.
Change day of display.
Note: Options may vary according to the
programme information available from the
broadcaster.
1. In the programme guide, press
OPTIONS.
2. Select an option, then press OK:
[Acquire EPG data]: Update
programme guide information.
[Change day]: Select the day to display
programme guide.
[Search by genre]: Search programmes
by genre.
[All reminders]: Display a list of all
programme reminders.
Play multimedia files
What you can do
You can play videos, photos and music on
your TV from a USB device connected to
the TV.
Play files from USB device
If you have photos, videos or music files on a
USB storage device, you can play the files on
TV.
Caution:
TP Vision is not responsible if the USB
hard drive is not supported, nor is it
responsible for damage to or loss of
data in the device.
Do not overload the USB port. If you
connect a USB storage device that
consumes more than 500mA power,
make sure that it is connected to its
own external power supply.
Browse USB device
1. Connect the USB device to the USB
connector on the TV.
2. Press SOURCE, select [USB], then
press OK.
3. Select a file from the content browser,
then press OK to start play.
4. Press OK to control play.
5. Optional: To select a different USB device,
select [USB device] at the bottom of the TV
screen.
Tips:
Select the top bar to filter your files by
type.
Select [Sort] to arrange the files by
name, date or other fields.
EN 14
English
Play options
Watch video
1. Select in the top bar.
2. Select a video, then press OK.
3. Optional: To play all the videos in a folder,
select a video, then select [Play all].
To skip to the next or previous video,
press CH+ or CH -.
To pause the video, press OK.
Press OK again to resume playback.
To skip forward or backward 10
seconds, press or .
To stop the video or exit the content
browser, press .
Video options
While you play video, press OPTIONS,
then press OK to select an option:
[Subtitles]: Select the available subtitle
settings.
[Subtitle language]: Select the language
for subtitles if available.
[Character set]: Select the correct
character set for the subtitles.
[Audio language]: Select an audio
language.
[Repeat]: Select [Repeat] to play the
video file repeatedly or [Play once] to
play the video file once.
[Shuffle on] / [Shuffle off]: Enable or
disable random play of video files.
[DivX® VOD]: Display the DivX
registration and deregistration codes for
this TV.
Note:
To view information about a video (for
example, played position, duration, title or
date), select the video, then press INFO.
To hide the information, press INFO
again.
Listen to music
1. Select in the top bar.
2. Select a track, then press OK.
3. Optional: To play all the tracks in a folder,
select a track, then select [Play all].
To skip to the next or previous track,
press CH+ or CH-.
To pause the track, press OK.
Press OK again to resume playback.
To skip forward or backward 10
seconds, press or .
To stop the video or exit the content
browser, press .
Music options
While you play music, press OPTIONS,
then press OK to select an option:
[Repeat]: Select [Repeat] to play a
track or an album repeatedly, or select
[Play once] to play a track once.
[Shuffle on] / [Shuffle off]: Enable or
disable random play of tracks.
Note:
To view information about a song (for
example, title, artist or duration), select the
song, then press INFO.
To hide the information, press INFO
again.
View photos
1. Select in the top bar.
2. Select a photo thumbnail, then pressOK.
Start a slideshow
If there are multiple photos in a folder, select
a photo, then select [Slideshow].
To skip to the next or previous video,
press CH+ or CH -.
To stop the slideshow or close the
photo, press LIST.
Slideshow options
While you play a slideshow, press
OPTIONS, then press OK to select an
option:
[Shuffle off] / [Shuffle on]: Enable or
disable random display of pictures in
the slideshow.
[Repeat]: Select [Repeat] watch a
slideshow repeatedly or [Play once] to
watch once.
[Slideshow time]: Select the display
time for each photo in the slideshow.
[Slideshow transitions]: Select the
transition from one photo to the next.
EN 15
3 Use more of
your TV
Professional mode
What you can do
With professional mode, you can configure
this TV for commercial use. This includes
features such as:
Blocking guests from modifying the TV
channels or settings
Programming the TV to switch on to a
specific channel and volume
Limiting the maximum volume
Blocking specific channels
Locking buttons on the remote control
Controlling on-screen information
Note: In professional mode, most of the
mainstream features are replaced by similar
features for commercial use.
Access professional-mode settings
1. Press on the remote control.
2. Press 3, 1, 9, 7, 5, 3, .
The professional setup menu appears.
Switch on professional mode
1. In the professional setup menu, select
[Professional Settings] > [Professional
mode].
2. Select a setting to change, then press OK:
[On]: Switch on professional mode.
Hospitality features are enabled.
[Off]: Switch off professional mode.
The TV operates as a normal consumer
TV.
3. Press to store all professional mode
settings and exit.
4. Restart the TV.
Display hotel information
You can store and display information about
your hotel on TV sets, such as:
Welcome logo
Welcome message
Hotel information page
Display a welcome logo
You can create a welcome logo with images
such as your hotel's logo.
1. Create a welcome screen in .png format
and save the file to a USB storage device.
2. Connect the USB storage device to the
TV, then switch on the TV.
3. In the professional setup menu, select
[Welcome logo] > [USB to TV].
4. Select [Welcome logo] > [Display logo]
> [On] to display the logo.
Display a welcome message
You can create and display a welcome
message for your guests. The message can
consist of up to two lines of text, each
containing a maximum of 20 alphanumeric
characters.
1. In the professional setup menu, select
[Welcome message] > [Display message] >
[On].
2. Select a setting to change:
[Line 1] / [Line 2]: Enter the content
for the welcome message.
[Clear]: Clear [Line 1] and [Line 2].
[Message Time-out]: Set how long to
display the message.
3. Press OK to display the on-screen
keyboard and use the Navigation buttons to
compose the welcome message.
Display a hotel information screen
You can create and display static information
screens about your hotel. The information
page appears as an icon in the home menu,
when you switch on the TV, and can also be
accessed by pressing INFO.
1. Create an information screen in .jpg
format and save the file to a USB storage
device.
2. Connect the USB storage device to the
TV, then switch on the TV.
3. In the professional setup menu, select
[Hotel information] > [USB to TV].
4. Select [Hotel information] > [Display
information] > [On] to display the hotel
information.
EN 16
English
To view the hotel information screen by
pressing INFO, in the professional setup
menu, select [Hotel information] > [Info
key enable] > [On].
Change professional mode settings
Professional mode settings
Use professional-mode settings to speed up
installation of your TV for commercial use.
1. In the professional setup menu, select
[Professional Settings], then press OK.
2. Select a setting to change, then press OK:
[Room ID]: Set a Room ID for the TV.
[Consumer setup]: Shortcut to the full
TV menu to configure all the TV
settings.
[Channel setup]: Shortcut to channel
list where you can re-arrange, rename
and hide channels.
[USB to TV]: Clone settings stored on
a USB storage device from another
Philips TV to your TV.
[TV to USB]: Copy your TV's settings
to a USB storage device. These settings
can be cloned onto another Philips TV.
[RF to TV]: Copy settings from a Philips
TV using RF signal.
[Reset]: Reset all professional mode
settings to the factory default.
Installation settings
Use these settings to configure installation
settings.
1. In the professional setup menu, select
[Installation].
2. Select a setting to change, then press OK:
[Blank channel]: Select a channel to
play audio only.
[Auto channel update]: Update
channels automatically.
[Auto software update]: Update your
TV software automatically.
[Skip scrambled signals]: Enable or
disable scrambled channels in the
channel list.
[Multi remote control]: Select an
option to identify a paired remote
control.
[MyChoice]: Enable or disable
MyChoice channels.
[ThemeTV]: Enable or disable Theme
TV.
[SmartPay]: Enable or disable SmartPay.
Pairing TVs with a remote control
You can pair a TV with up to ten remote
controls.
1. In the professional setup menu, select
[Installation] > [Multi remote control].
2. Select an option from [TV0] to [TV9] to
identify the paired remote control, then
press OK.
3. To set the remote control in a specific
mode, simultaneously press and a number
key for 5 seconds to set the remote control
in the [TV0] to [TV9] mode.
Note:
Press and hold OK on a remote
control for more than five seconds. The
TV displays the TV ID (for example,
[TV0]) as well as the ID of the
transmitting remote control.
If the batteries in the remote control
are replaced after pairing, you will need
to pair the remote control with your
TV again to assign an ID to your TV.
Power-on settings
Customise the way the TV behaves when it
is switched on.
1. In the professional setup menu, select
[Switch on setting].
2. Select a setting to change, then press OK:
[Switch on channel]: Select a channel
to display when the TV is switched on.
[Switch on vol]: Select the volume of
the speakers to be used when the TV is
switched on.
[Max volume]: Limit the maximum
volume of the TV.
[Switch on picture format]: Select a
picture format to be used when the TV
is switched on. If the source does not
support the pre-defined format, [Auto
fill] is enabled.
[Power on]: Select the mode to be
used when the TV is switched on:
- [On]: If the mains power is switched
on, the TV automatically switches on.
- [Standby]: If the mains power is
EN 17
switched on, the TV automatically
switches to standby.
- [Last status]: If the mains power is
switched on, the TV automatically
switches to the last status (i.e. on or to
standby).
[Smart power]: Enable or disable
energy saving mode.
Load clock
In Professional mode, you can set the local
time according to the broadcast channel or
country. For general clock features, see Use
more of your TV > Set locks and timers >
Clock (Page 22).
1. In the professional setup menu, select
[Clock setup].
2. Select a setting to change, then press OK:
[Download program]: Select a channel
to download the clock settings.
[Country selection]: Select a country
for the local time to be based on.
[Time offset]: Select the number of
hours to offset.
Combine channel list
In Professional mode, you can create an
integrated channel list comprising of
broadcast channels, connected devices and
multimedia files from a USB storage drive.
Channels are named based on the TV
connector or the media file name.
1. In the professional setup menu, select
[Combine channel list].
2. Select a setting to change, then press OK:
[AV]: Add connected devices to the
channel list.
[Media]: Add multimedia files to the
channel list.
Control user access
You can control user access to the TV with
the following features:
Lock remote control buttons
Limit access from USB, HDMI-CEC or
SCART connectors
Customise guest view
Enable SCART
Use this feature to control the TV through a
connected SCART device. When the
SCART device is switched on, the TV
automatically switches on.
1. Switch on the TV and the connected
SCART device.
2. In the professional setup menu, select
[Control settings] > [Auto SCART] >
[Power on scart], then press OK.
Enable HDMI-CEC
If your TV is connected to HDMI devices
that are HDMI-CEC compliant, control these
devices with the TV's remote control. For
more details on how to use HDMI-CEC, see
Connect your TV > Set up EasyLink
devices (Page 41).
1. Switch on the TV and all connected
HDMI-CEC devices.
2. Press .
2. Select [Setup] > [TV settings] >
[EasyLink] > [On], then press OK.
3. In the professional setup menu, select
[Control settings] > [HDMI-CEC IN] >
[On], then press OK.
Enable or disable access to a USB storage
device
1. In the professional setup menu, select
[Control settings] > [Enable USB].
2. Select [On] or [Off], then press OK.
Direct USB access
You can set the TV to automatically display
the contents of a USB storage device when
the device is connected.
1. In the professional setup menu, select
[Control settings] > [USB break-in] >
[On], then press OK.
Change other control settings
1. In the professional setup menu, select
[Control settings].
2. Select a setting to change, then press OK:
[Lock KB lock]: Select [On] to lock all
TV buttons except . Select [Off] to
unlock all buttons. Select [All] to lock
all buttons.
EN 18
Loading...