Philips HD7870 User Manual

HD7872, HD7870

User manual

Příručka pro uživatele

For more support go to:

www.philips.com/senseo-twist/support

4222_200_0663_2_DFU-Redesign_A5_v1.indd 1			3/12/13 1:41 PM

4222_200_0663_2_DFU-Redesign_A5_v1.indd 2			3/12/13 1:41 PM

4222_200_0663_2_DFU-Redesign_A5_v1.indd 3			3/12/13 1:41 PM

4222_200_0663_2_DFU-Redesign_A5_v1.indd 4			3/12/13 1:41 PM

1 Introduction		2	General description
Congratulations on your purchase and welcome		1	Coffee collector
to Philips!To fully benefit from the support that		2	Lid lever
Philips offers, register your product at www.philips.		3	Lid with brewing chamber
com/welcome.		4	Sealing ring
		5	Water distribution disc
	1.1 SENSEO® coffee system	6	2-cup pod holder qq
Make your coffee moments truly special with		7	1-cup pod holder q
SENSEO®.This unique system combines the		8	Coffee spout cover
easy-to-use Philips SENSEO® coffee machine with		9	Coffee spout
the specially developed Douwe Egberts SENSEO®		10	Spout release buttons
coffee pods, giving you a full, smooth coffee with a		11	Removable drip tray
delicious foam layer.		12	Cup tray
Douwe Egberts coffee in convenient SENSEO®		13	Touch panel
coffee pods and Philips’ unique new SENSEO®		14	On/off button
brewing system are perfectly matched to ensure		15	Personal coffee memory symbol
that the best taste and aroma are extracted from			(HD7872 only)
the coffee. Discover all SENSEO® coffee blends at		16	Regular coffee symbol
www.senseo.com.		17	Selection button
To ensure a smooth and full coffee taste, you		18	Strong coffee symbol
should keep the following things in mind:		19	CALC light
Fresh coffee pods		20	1-cup button q
Use the SENSEO® coffee pods that have been		21	2-cup button qq
specially developed by Douwe Egberts for your		22	Water reservoir
SENSEO® coffee machine for a full, round taste.		23	Water reservoir lid
Douwe Egberts SENSEO® coffee pods stay fresh
longer if you store them in an airtight storage

container.

Fresh water

Use fresh water every day. If you have not used the coffee machine for one day, you have to flush it with fresh water before you use it again (see chapter‘Brewing SENSEO® coffee, section ‘Flushing the machine after a day of non-use’).

ENgLISH

4222_200_0663_2_DFU-Redesign_A5_v1.indd 5			3/12/13 1:41 PM

			Caution
	3 Important
			• After unpacking the machine,
	Read this user manual carefully before		never put your SENSEO®
			machine on its side.Always keep
	you use the machine and save it for		it in upright position, also during
	future reference.		transport.
	Danger		• Always return the machine to
	• Never immerse the machine in		a service centre authorised by
	water or any other liquid.		Philips for examination or repair.
	Warning		Do not attempt to repair the
	• Check if the voltage indicated on the		machine yourself, otherwise your
	bottom of the machine corresponds		guarantee becomes invalid.
	to the local mains voltage before		• Do not use the machine in
	you connect the machine.		combination with a transformer,
	• This appliance can be used by		as this could cause hazardous
	children aged from 8 years and above		situations.
	and by persons with reduced physical,		• Always put the machine on a flat
	sensory or mental capabilities or		and stable surface.
	lack of experience and knowledge		• Do not use the machine at
	if they have been given supervision		altitudes higher than 2200 metres
	or instruction concerning use of the		above sea level.
	appliance in a safe way and if they		• Never pour milk, coffee, hot water
	understand the hazards involved.		or carbonated water into the
	• Cleaning and user maintenance shall		water reservoir.
	not be made by children unless they		• Never flush the machine or let it
	are older than 8 and supervised.		brew coffee when the spout is not
	• Keep the appliance and its cord		in place.
	out of the reach of children aged		• This machine is intended for
	less than 8 years.		normal household use only.
	• Children should be supervised to		It is not intended for use in
	ensure that they do not play with		environments such as staff
	the appliance.		kitchens of shops, offices, farms
	• Do not use the machine if the		or other work environments.
	plug, the mains cord or the		Nor is it intended to be used by
	machine itself is damaged.		clients in hotels, motels, bed and
	• If the mains cord is damaged, you		breakfasts and other residential
	must have it replaced by Philips,		environments.
	a service centre authorised
	by Philips or similarly qualified
	persons in order to avoid a hazard.
	6

4222_200_0663_2_DFU-Redesign_A5_v1.indd 6			3/12/13 1:41 PM

3.1 Compliance with standards	2 Tilt the top of the water reservoir backwards
This machine complies with all standards regarding	(1) and lift the water reservoir off the
electromagnetic fields (EMF). If handled properly	machine (2).
and according to the instructions in this user
manual, the machine is safe to use based on
scientific evidence available today.
The energy consumption of this machine in
off mode is less than 1 watt.This means that
this machine complies with European Directive
2009/125/EC, which sets the ecological design
requirements for energy-using products.

ENgLISH

4Flushing the machine before first use

It is important that you flush your SENSEO® coffee machine before first use.After the flushing cycle (which only takes approx. 2 minutes), the machine is ready for brewing SENSEO® coffee.

CCaution:

Never interrupt the flushing cycle halfway.If you do,the boiler does not fill itself properly.

1Attach the spout to the machine. grab the two ridges of the inner part of the spout and squeeze them lightly (1). Place the spout on the machine and release the two ridges (2).

CCaution:

Never flush the machine or let it brew coffee when the spout is not in place.

3Fill the water reservoir to the top with cold tap water.

4Place the lid on the water reservoir before you put the water reservoir back onto the machine.

4222_200_0663_2_DFU-Redesign_A5_v1.indd 7			3/12/13 1:41 PM

5Tilt the water reservoir and place the bottom back onto the machine (1).Then press the top of the water reservoir towards the machine (2).

9 Put the plug in an earthed wall socket.

10Press the on/off button 3.The button lights up to indicate that you have to flush the machine.

6 Remove the drip tray.

11 To start flushing, press the 1-cup button q and the 2-cup button qq briefly at the same time.

7Place a bowl with a capacity of at least 1.5 litres under the coffee spout.

8Make sure a pod holder, without pod or pods, is in place.

•The on/off button starts flashing to indicate that the flushing cycle has started.

•During the flushing cycle,the boiler fills itself with water from the water reservoir and cold water comes out of the coffee spout. During the flushing cycle,the machine produces more noise than during a regular brewing cycle.

• When all the water in the water reservoir

has been used up,the flushing cycle is finished and the machine switches off.

4222_200_0663_2_DFU-Redesign_A5_v1.indd 8			3/12/13 1:41 PM

12Fill the water reservoir with fresh tap water, put the lid on it and place it back onto the machine.

Your SENSEO® machine is now ready for use so that you can brew your first cup of delicious coffee.

5Brewing SENSEO® coffee

While the SENSEO® coffee machine is heating up, you can select the coffee strength you prefer and the number of cups you want to brew.The machine then brews the cup or cups immediately after it has heated up.

1Make sure that the water reservoir is filled with fresh cold tap water beyond the MIN level and that the lid is on the water reservoir.

ETip:

Use fresh water every day.

2Put the plug in an earthed wall socket.

3Press the on/off button 3.The on/off button flashes slowly while the water heats up.

DNote:

If the on/off button flashes rapidly, the water reservoir does not contain enough water for brewing one cup of coffee.

4Pull the lid lever upwards to open the lid.The lid opens automatically.

5If you want to make one cup of SENSEO® coffee, place the 1-cup pod holder q in the machine (1). If you want to make two cups, put the 2-cup pod holder qq in the machine

(2). Make sure the pod holder is clean.

ENgLISH

4222_200_0663_2_DFU-Redesign_A5_v1.indd 9			3/12/13 1:41 PM

6 Place 1 coffee pod in the 1-cup pod holder q (1) or place 2 coffee pods in the 2-cup pod holder qq (2). Place the pod or pods properly in the centre of the pod holder, with the convex side pointing downwards. Press the pod or pods lightly into the pod holder.

	DNote
	The cups you use should have a capacity of at
	least 150ml when you brew regular coffee or
	100ml when you brew strong coffee. Do not
	use cups that are too large, as they cause the
	coffee to get cold more quickly.
	9 Press the selection button to select the
DNote:	desired coffee strength. Select the cup symbol
Make sure the coffee in the pod or pods is	with three bars for a regular cup of coffee
evenly distributed.	(125ml) (1). Select the cup symbol with one
CCaution:	bar for a strong cup of coffee (60ml) (2).
CCaution:
Never put normal ground coffee or use torn
pods in the SENSEO® machine,as this causes
it to become blocked.
7 Close the lid (1) and lock the lever (2).

BWarning:

Make sure the lid is closed properly and the lid lever is locked before you start brewing coffee.

8Place one cup or two cups under the spout openings.You can adjust the height of the coffee spout by sliding it upwards or

downwards.You can also remove the drip tray to be able to place higher cups.

10When you have selected the desired coffee strength, press the 1-cup button q for one cup (1) or press the 2-cup button qq for two cups (2).

4222_200_0663_2_DFU-Redesign_A5_v1.indd 10			3/12/13 1:41 PM

11When the water has heated up and the on/ off button lights up continuously, the machine starts brewing coffee.

ETip:

You can interrupt the brewing cycle at any time.To do this, press the same cup button (1- cup button or 2-cup button) that you pressed to start brewing coffee. However, if you do this, the machine does not complete the interrupted brewing cycle if you switch it on again or press the same cup button again.

DNote:

Do not remove the water reservoir during a brewing cycle.

12When the coffee is ready, remove the used coffee pod or pods. Simply lift the pod holder out of the machine and empty it.

CCaution:

There may still be some hot water/coffee on the coffee pod or pods.

13After use, press the on/off button 3 to switch off the machine.

5.1Personal coffee memory (HD7872 only)

You can program the machine to brew the amount of coffee you prefer (up to 145ml). Simply experiment and find out what you like best.We advise you to brew at least 60ml for optimal taste and temperature.

While programming, you can only use the 1-cup button.When you have completed the programming process, you will be able to brew one or two cups with the programmed amount of coffee.

DNote:

It is not possible to program your personal coffee memory while the machine is heating up.Wait until the on/off button lights up continuously.

1Place 1 coffee pod in the 1-cup pod holder and place 1 cup under the spout openings.

2To enter the programming mode,first select the personal coffee memory symbol (star symbol) with the selection button (1).Keep the selection button pressed for 2 seconds until the star symbol starts flashing (2) and you hear a beep.Then release the selection button.

ENgLISH

DNote:

If you do not use the machine, it switches off automatically after 15 minutes to save energy.

3Press the 1-cup button to make the coffee flow into the cup (1).When the cup contains the amount of coffee you prefer, press the 1-cup button again (2).Your preferred amount of coffee has been set.

4222_200_0663_2_DFU-Redesign_A5_v1.indd 11			3/12/13 1:41 PM

From now on, your SENSEO® machine brews one or two cups with this amount of coffee when you select the personal coffee memory symbol with the selection button.

DNote:

If you want to change the set amount of coffee, simply perform steps 1-4 again.

5.2Flushing the machine after a day of non-use

If you have not used the coffee machine for one day, flush it to make sure that the boiler is filled with fresh water.

To flush the machine, brew two cups of hot water in the following way:

1Fill the water reservoir with cold tap water beyond the MIN level (1). Put the lid on it (2) and put it the water reservoir back onto the machine.

3Close the lid and lock the lever.

4Put two cups or a large mug under the coffee spout to collect the water.

5Press the on/off button 3.The on/off button flashes slowly while the water heats up.

2Put the 1-cup pod holder q or the 2-cup pod holder qq in the machine without pods.

Make sure that the coffee strength you have selected is regular coffee (cup symbol with three bars).

Press the 2-cup button qq to brew two cups of hot water.

4222_200_0663_2_DFU-Redesign_A5_v1.indd 12			3/12/13 1:41 PM

+ 26 hidden pages