Philips HD 3275, HD 3274 Service Manual

Philips Domestic Appliances and Personal Care

Fan Heater

HD 3274 HD 3275

PRODUCT INFORMATION

Functions, features and operational aspects :

HD 3274 HD 3275

Switch : 4 positions : off x x

cool air x x

●

●●

Thermostat x x

Frost guard x x

On/off power light x x

Overheating protection x x

Drip waterproof - x

Stand/wall mounting bracket - x

Voltage/frequency : 230V/50Hz Power consumption : 1000 - 2000 Watt Safety : Insulation class

1000 Watt x x

2000 Watt x x

MSH coding 8823 274 00000

8823 275 00000

Product meets the requirements regarding interference suppression on radio and television.

PublishedbyPhilipsDomesticAppliancesandPersonalCare PrintedintheNetherlands

4822 729 22048 98/09

PCS 99 588

Copyrightreserved Subjecttomodification

DISASSEMBLY ADVICE PARTS LIST HD 3274 / HD 3275

CAPS OPERATION

KNOBS 1

SWITCH KNOB 2

THERMOSTAT KNOB 3

SWITCH 4

THERMOSTAT 5

PILOT LIGHT 9

remove SCREW A (4x) remove FRONT PART 101 remove CAPS OPERATION

KNOBS 2

MOTOR 7

HEATING ELEMENT 6

remove SCREW A 4x remove FRONT PLATE 101 remove SCREW B 2x

FAN BLADE 8

remove SCREW A 4x remove FRONT PLATE 101

STAND 102

POS. DESCRIPTION SERVICE CODE

1 CAP OPERATION KNOBS 4822 462 10812

2 SWITCH KNOB 4822 410 10791

3 THERMOSTAT KNOB 4822 410 10792

4 SWITCH 4822 273 10319

5 THERMOSTAT 4822 282 10299

6 HEATING ELEMENT 4822 259 10212

7 MOTOR 4822 361 10521

8 FAN BLADE 4822 515 20148

9 PILOT LAMP 4822 134 10056

NOTE:

For standardisation reasons, only the red-coloured operation knobs have been incorporated into this manual.

The dark blue coloured knobs have to be replaced by the red-coloured ones.

When a cordset has to be replaced, always use a cordset with core wires with a diameter of 1.0 mm

Parts, with numbers from 100 upwards, cannot be ordered separatly.

1000 W

P. L.

NOTE: AFTER THE PRODUCT HAS BEEN REPAIRED, IT

SHOULD FUNCTION PROPERLY AND HAS TO MEET THE SAFETY REQUIREMENTS AND LEGAL REGULATIONS AS LAID DOWN AND OFFICIALLY ESTABLISHED AT THIS MOMENT.

Possible complaints

The heater doesn’t function :

1) When set to the cool air setting

action: Set the thermostat knob to the highest position.

2) The overheating safety device has been activated

action: To reset the overheating device, remove the

mains plug from the wall socket and let the

heater cool down for 30 minutes.

= LINE

= NEUTRE T = THERMOSTAT (Not included in HD3271) C. O.

= CUT OUT

C. O.

= PILOT LIGHT (Not included in HD3271)

P. L.

= SWITCH

= MOTOR

DAP0244

+ 2 hidden pages