Philips GC 3117 Service Manual

Steam Iron Elance

GC3117

Philips Domestic Appliances and Personal Care

Service Manual

PRODUCT INFORMATION

Features

- Colour Pearlescent Green

- Careeza soleplate

- Tank capacity (300 ml)

- Steam rate (30 g/min)

- Shot of steam (75 g/min)

- Vertical steam (75 g/min)

- Permanent Anti-Calc

- Integrated cord winder

- Cord length : 2 m.

Safety Information

- This product meets the requirements regarding
interference suppression on radio and TV.

- After the product has been repaired, it should function
properly and has to meet the safety requirements and
legal regulations as officially laid down at this moment.

TECHNICAL INFORMATION

Voltage : 220 - 240 V
Frequency : 50 - 60 Hz
Power consumption : 1900 W

Water advice

Suitable for tap water use. However if the tap water in your
area is very hard, we advise you to mix it with a equal portion
of distilled water or to use distilled water only.

Cleaning of the Iron

Use only the Calc clean button for cleaning of the Iron.
Never use vinegar, starch or chemically descaled water.

Soleplate

Careeza is a multi layer chemical substance that gives an
excellent gliding over various fabrics and better care for the
garments.

Vertical Steam

When the iron is kept in a vertical position, the shot of steam
(S.O.S) button can be used to iron hanging fabrics such as
curtains.

Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification

04/01

DISASSEMBLY ADVICE

GC3117

DIAL 1

BACKPLATE 2

CORD SET 4

BALL SWIVEL 5

Remove Screw A (1x)

Remove BACKPLATE 2
Remove Screw B (2x) cord clamping

INLAY 6

LAMP ASSY 10

FILLING DOOR 7

STEAM SLIDER 8

LAMP COVER 9

SOS KNOB 12

SPRAY KNOB 13

TANK SEAL 14

remove Screw A (1x)
remove BACKPLATE 2
remove Screw B (2x) cord clamping
remove INLAY 6

DOSING UNIT 15

remove Screw A (1x)
remove BACKPLATE 2
remove Screw B (2x) cord clamping
remove INLAY 6
remove Screw C (2x)
remove Screw D (2x)
remove DOSING UNIT 15

TANK 19

THERMOSTAT BUSH 20

remove Screw A (1x)
remove BACKPLATE 2
remove Screw B (2x) cord clamping
remove INLAY 6
remove Screw C (2x)
remove Screw D (2x)
remove DOSING UNIT 15
remove Screw E (2x)
remove HOUSING 16
remove Screw F (2x)
remove TANK 19

HEAT SHIELD 21

remove Screw A (1x)
remove BACKPLATE 2
remove Screw B (2x) cord clamping
remove INLAY 6
remove Screw C (2x)
remove Screw D (2x)
remove DOSING UNIT 15
remove Screw E (2x)
remove HOUSING 16
remove Screw F (2x)
remove TANK 19
remove Screw G (1x)
remove HEAT SHIELD 21

COVER 22

SOS SEAL 23

DOSING SEAL 24

SOLEPLATE ASSY 25

HOUSING 16

RATTLE SPRING 17

PUMP ASSY 18

remove Screw A (1x)
remove BACKPLATE 2
remove Screw B (2x) cord clamping
remove INLAY 6
remove Screw C (2x)
remove Screw D (2x)
remove DOSING UNIT 15
remove Screw E (2x)
remove HOUSING 16

remove Screw A (1x)
remove BACKPLATE 2
remove Screw B (2x) cord clamping
remove INLAY 6
remove Screw C (2x)
remove Screw D (2x)
remove DOSING UNIT 15
remove Screw E (2x)
remove HOUSING 16
remove Screw F (2x)
remove TANK 19
remove Screw G (1x)
remove HEAT SHIELD 21
remove Screw H (2x)
remove COVER 22

2-4

PARTS LIST

Pos Service code Description

1

10
11
12
13
14

15
16
17
18
19

20
21
22
23
24

25

4239 021 23860
4239 021 24660

2

4239 026 18000

3

4239 026 10310

4

4239 000 08850

5

4239 026 10110

6

4239 021 10280

7

4239 021 10060

8

4239 026 10160

9

4239 026 08280

4239 021 03140
4239 026 01220
4239 026 10040
4239 026 10090
4239 015 54400

4239 021 08510
4239 026 10430
4239 026 08840
4239 020 90560
4239 022 54390

4239 015 98410
4239 010 07850
4239 026 17470
4239 015 51450
4239 015 55430

4239 021 23390
4239 026 05990

Dial printed (Fre/Dut text)
Dial printed (Ger/Swe text)
Backplate
Backplate cover
Cordset EU

Ball swivel
Inlay printed
Filling door assy
Steam slider
Lamp cover

Lamp assy
Lamp holder
SOS knob
Spray knob
Tank seal

Dosing unit
Housing
Plastic rattle spring
Pump assy
Tank assy (Non drip stop)

Thermostat bush
Heat shield
Cover (Non drip stop)
SOS seal
Dosing seal

Soleplate assy - HV
Filling cup

GC3117

N

RESISTOR

INPUT

L

E

LAMP

FUSE

THERMOSTAT

HEATING
UNIT

REPAIR INSTRUCTIONS

- Due to high voltage of the iron, ONLY the specified cordsets must be used.

- For standardisation reasons :

Type plate : No information about the typenumber and voltage have been stamped onto the typeplate.

When replacing the typeplate, engrave at least typenumber onto the typeplate with a sharp object.

- Thermostat, fitted to the soleplate 25 has already been adjusted by the supplier and secured by glue. To avoid mal-function of the

iron, NEVER re-adjust the thermostat.

NOTE :

The thermostat can only be ordered together with the soleplate assembly 25.

OPTIONAL (accessories)

- No specific issues

3-4

EXPLODED VIEW

GC3117

Screws : d x 1

A, B 3.5 x 16 mm
C 2.5 x 14 mm
D 3.5 x 15 mm
E 3.5 x 17 mm

(with washer 1mm)

F 4.0 x 12 mm

(with washer 1mm)

G 4.0 x 10 mm

4-4