Philips FWM387 User Manual

Mini Hi-Fi System

3

Play form USB

Note

D

With the Hi-Fi system, you can use USB fl ash
memory (USB 2.0 or USB1.1), USB fl ash
players (USB 2.0 or USB1.1), memory cards
(requires an additional card reader to work
with this Hi-Fi system).

Enjoy

1 Insert the USB device’s USB plug into the

socket on the main unit.

Press USB to select USB.

2
3 Play the USB’s audio fi les as you do with

the albums/tracks on a CD.

Listen to radio

Press TUNER (or TUN on the remote

1

control) repeatedly to select FM or MW.

Press PROG for more than two seconds

2

to program all available stations in order of
waveband.

In tuner mode, press ALBUM/PRESET

3

+/- (or ABL/PRESET +/- on the remote
control) to select a preset number.

Quick start guide

1
2
3

Connect

Setup

Enjoy

FWM387

Tip

E

Detailed features and additional functions are
described in the user manual.

© Royal Philips Electronics N.V. 2009

All rights reserved.

Specifi cations are subject to change without notice.

Trademarks are the proper ty of Koninklijke Philips

Electronics N.V. or their respective owners.

Printed in China PDCC-2009

EN

What’s in the box

2

3

Quick start guide

1

Connect

Setup

2

Enjoy

2

MP3 link cable

XXXXXXX

XXXXXX

XXXXXX

Eng

AC power cable

FM wire antenna

1

Remote control
with 2 AAA batteries

FWM387

User Manual

User manual

2

Set clock

1

In the standby mode, press DISPLAY/

CLOCK to activate the clock setting mode.

» The 12 hour or 24 hour format is

Press ALBUM/PRESET+/- (ALB/PRE-

2

SET+/- on the remote control) repeatedly
to select 12 hour or 24 hour format.

Press DISPLAY/CLOCK to confi rm.

3

»

Press ALBUM/PRESET+/- (ALB/PRE-

4

MW loop antennaQuick start guide

SET+/- on the remote control) to set the
hour.

Setup

displayed.

The clock digits are displayed and begin
to blink.

í

∞ / §

Press

5

control) to set the minute.

Press DISPLAY/CLOCK to confi rm.

6

ë

(

/

on the remote

1

Connect speaker cables.

1

Connect the MW and FM antennas.

2

Connect the AC power cable to the main

3

unit and the wall socket.

Tip

E

See the User Manual on how to connect other
equipment to this system.

Connect

3

Play disc

Press DISC 1/2/3 to select the disc source.

2

1
2 Press OPEN/CLOSE on the main unit to

open the disc compartment.

Enjoy

3 Load up to two discs on the disc trays, with

the printed side facing up

1

3

• To load the third disc, press DISC
CHANGE on the main unit to rotate

to the disc tray.

4 Press OPEN/CLOSE on the main unit to

close the disc compartment.

5 Press

to start play.

2;

6 To stop play, press Ç.