Philips FWD876-98 User Manual

FWD876/98

Use this simple and quick way to watch

your favourite DVD movie and enjoy

your Home Cinema experience!

Helpful Hints

You only need to make one video connection to your TV in
order to view the DVD playback.

If your TV has S-Video or Component (PR
PB Y) video jacks, use one of these video

connections instead for higher picture quality.

If your TV has only a single Antenna In jack,
you will need an accessory RF modulator. The RF
modulator converts the video from the DVD system
so it can play through the TV’s Antenna connector.
Refer to your owner’s manual for proper connection.

When listening to TV programs, press TAPE/AUX
button on the remote control to set the DVD system to AUX
mode in order for the sound to be heard.

Please refer to Owner’s Manual for more TV connection options.

VNAI

FM an

enna

DIN OUT cable

AC Power cable

(2 pieces)

Make sure your DVD system and TV are connected and turned on!

Plug & Play

1 Turn on the system.

“AUTO INSTALL PRESS PLAY” will be displayed.

2 Press PLAY 2; on the system to start installation.

Playing a disc

3 Press DISC on the remote control.

You can also select the DISC on the front panel.

4 Turn on the TV and select the correct Video mode.

You should see the blue Philips DVD background screen on the TV (If no disc in the DVD system).

5 Press OPEN

corresponding OPEN

Make sure the disc label is facing up. For double-sided discs, load the side you want to play face up.

6 Playback will start automatically.

If a disc menu appears, use
selection, then press OK to confirm. Or use the numeric keypad on the remote control to
select features. Follow the instructions given in the disc menu.

7 To stop playback, pr ess STOP 9.

0

CLOSE on the front of the DVD system and load discs, then press the

0

CLOSE again to close the disc tray.

1/¡/5/4 buttons on the remote control to make the necessary

Region Codes

DVDs m ust be labeled f or ALL regions or Region 3 ,
in order to play on this DVD system.

3

You should find the below accessories in the packaging box.

Audio cable

( white , red )

Remote control and
AAA sise batteries

Composite vide
cable ( yellow )

3

MW loop

antenna

Detailed playback features and additional functions are described in the

accompanying owner’s manual

FM an

tenna

Component vide cable

red , blue , green )

(

DIN OUT cable

AC Power cable

(2 pieces)