Notes:
– You can also connect the supplied power adaptor
cord (or the car adaptor) to the player and AC
mains (or the car cigarette lighter outlet) directly
wherever possible.
Note:
– Once the battery is fully discharged, immediately
the battery or not) in order to maximize the
battery life.When the power is low, the batter y icon
will be shown on the upper-left corner of the TFT
3 OPEN HERE
for warning.
recharge it (regardless of whether you plan to use
3 Disconnect the power adaptor cord (or the
➜ When the battery is fully charged, the
indicator turns off.
car adaptor) when the CHG indicator turns
off.
4 Remove the protective card (if any) and load a
6 To stop playback, press 9.
5 Pull the front panel back to close the disc
disc with the label side facing up.
compartment. Playback will start automatically.
If not, press 2;.
the car adaptor) to the player and AC mains
(or the car cigarette lighter outlet) to start
charging.
➜ The CHG indicator turns red .
2 Gently push the front panel as shown to open
➜ The POWER indicator turns on.
the disc compartment.
2 Connect the supplied power adaptor cord (or
1 Slide the POWER switch to ON to switch on
the DVD player.
1 Slide the POWER switch to the OFF position
(charging of the DVD player only possible in
the power-off mode).
1
Charge your battery
This portable DVD player is designed with a
built-in lithium battery to supply power to the
player when you are on travel.
2
Enjoy (Disc operation)
Quick start guide
Philips Portable DVD Player PET722/PET726
WK749
Yellow
Red
Not supplied
White
inputs, you will need to purchase a RF
modulator. Please consult your dealer.)
➜ You can consult the owner's manual of your
TV. (If your TV does not have Audio and Video
2 Switch on the TV and set to the correct video-
directly.
in channel.
1 Connect the AV OUT socket on the set to the
Connecting additional equipment (TV for
example)
video and audio sockets on a TV as shown
2
Enjoy (AV OUT)