E6
有疑 问？
请联系飞利浦
Wireless satellite speakers
and subwoofer
E6
ZH-CN 用户手册
始终如一地为您提供帮助
在以下网站上注册产品并获得支持
www.philips.com/support
EN User manual
目录
重要信息
1
安全
爱护产品
爱护环境
帮助和支持
开放源代码软件
您的产品
2
主装置
遥控器
无线环绕音箱
无线重低音音箱
接口
连接
3
连接主装置
为环绕音箱充电
与主装置手动配对连接
摆放音箱
连接电视的音频
连接其他设备的音频
通过
空灵校准
4
步骤 1：校准聆听区
步骤 2：校准无线环绕音箱位置 13
HDMI
连接数字设备
10
11
12
12
2
2
2
3
3
3
4
4
4
5
6
6
7
7
7
8
8
9
更新软件
6
检查软件版本
通过
产品规格
7
故障种类和处理方法
8
USB
设备更新软件
18
18
18
19
20
使用您的产品
5
调节音量
选择声音
MP3
USB
通过蓝牙播放音频
通过
自动待机
设置显示屏亮度
应用出厂设置
播放器
存储设备
NFC
连接蓝牙
13
13
13
14
15
15
17
17
17
17
ZH-CN
1
重要信息
1
请在使用本产品之前阅读并理解所有说
明。因未遵守说明而造成的损坏不在保修
范围内。
安全
小心触电或发生火灾！
• 在建立或更改任何连接之前，请确保所
有设备均已与电源插座断开连接。
• 切勿让本产品及附件与雨或水接触。切
勿将液体容器（如花瓶）置于产品旁
边。如果有液体溅到本产品表面或内
部，请立即断开其电源。请与客户服务
联系，对产品进行检查后再使用。
• 切勿将本产品和附件放置在靠近明火或
其他热源的地方，包括阳光直射处。
• 切勿将物体插入本产品的通风槽或其
他开口。
• 将电源插头或设备耦合器用作断电设备
时，该断电设备应可以随时使用。
• 不可将电池（电池组或安装的电池）置
于高温环境，如阳光直射处、明火或类
似环境。
• 在雷电天气之前，应断开本产品的
电源。
• 断开电源线时，应始终握住插头，而不
能拉电缆。
小心短路或起火！
• 有关标识和电源功率，请参阅产品背面
或底部的型号铭牌。
• 在将本产品连接到电源插座上之前，请
确保电源电压与产品背面或底部印刷的
电压值相匹配。如果电压不同，切勿将
产品连接到电源插座上。
小心受伤或损坏本产品！
• 切勿将本产品或任何物体放在电源线或
其他电子设备上面。
• 如果在低于
品，请先拆开产品的包装并等待其温度
达到室温，再将其连接至电源插座。
的温度下运送了本产
5°C
• 本产品的部件可能由玻璃制造。请小心
处理，以免受到伤害或造成损坏。
小心过热！
• 切勿将本产品安装在封闭的空间内。务
必在产品周围留出至少
以便通风。确保窗帘或其他物体不会遮
挡产品上的通风槽。
小心污染！
• 请勿混合使用电池（旧电池与新电池或
碳电池与碱性电池，等等）。
• 电池安装不正确会有爆炸危险。只能用
相同或相当的型号更换。
• 如果电池电量耗尽或遥控器长时间不
用，请取下电池。
• 电池含有化学物质，因此应适当地进
行处理。
吞咽电池的危险！
• 产品/遥控器可能包含纽扣式/按钮式电
池，容易被吞咽。始终将电池放在儿
童接触不到的地方！ 如不慎吞咽，电
池可能导致严重受伤或死亡。摄入后
小时内可能发生严重的内部烧伤。
• 如果您怀疑电池不慎被吞咽或位于体内
的任何部位，请立即就医。
• 更换电池时，请务必将所有新旧电池放
在儿童接触不到的地方。更换电池后，
确保电池仓完全紧闭。
• 如果电池仓无法完全紧闭，请不要继续
使用产品。放在儿童接触不到的地方并
联系制造商。
英寸的空间
4
2
此款
类设备具有双重绝缘，不提供保护
II
接地。
爱护产品
• 只能用微细纤维清洁布清洁本产品，如
清除音箱布上积聚的灰尘和脱落物。切
勿使用任何清洁溶剂清洁木质面板和
音箱布。
2
ZH-CN
• 用稍微蘸湿的软布清洁皮质提梁，先将
软布浸入皮革清洁溶液，然后用干燥软
布擦亮皮革。
• 由于使用天然材料，木质面板和皮质提
梁的颜色和纹理可能会有所不同。
爱护环境
弃置旧产品
本产品采用可回收利用的高性能材料和组
件制造而成。
弃置产品时，请不要将其与一般生活垃圾
一同丢弃，应将其交给政府指定的回收中
心或回收。这样做有利于环保。
帮助和支持
的源代码副本。本承诺自购买本产品后三
年内有效。要获得源代码，请联系
source-gi@gibson.com
用电子邮件，或者在寄到此电子邮件地
址后一周内没有收到确认回执， 请写信
至“
Intellectual Property Team, Gibson
。如果您不想使
open.
Innovations Limited, 5/F Philips Electronics
Building, 5 Science Park East Avenue,
Hong Kong Science Park, Shatin, N.T.
Hong Kong
”。
有关广泛的在线支持，请访问
www.philips.com/support
• 下载用户手册和快速入门指南
• 观看视频教程（仅限于选定的型号）
• 查找常见问题
• 通过电子邮件向我们发送问题
• 与支持代表聊天。
请按照网站上的说明选择您的语言，然后
输入您的产品型号。
或者，您可以联系所在国家/地区的客户
服务。联系之前，请记下产品的型号和
序列号。您可在产品的背面或底部找到此
信息。
(FAQ)
以：
的答案
开放源代码软件
本产品包含有开源软件授权许可的软件。
许可和回执正文，请参阅
com/support
网站上本产品的用户手册。
Gibson Innovations Limited
用户提出要求，并出具相应的许可证，我
们将向其提供本产品中所用的开源软件包
www.philips.
特此承诺，若
ZH-CN
3
您的产品
b
a
c
d
f
h
i
j
k
e
g
n
l
m
2
感谢您的惠顾，欢迎光临飞利浦！ 为
了您能充分享受飞利浦提供的支持
（例如产品软件升级的通知），请在
www.philips.com/welcome
产品。
上注册您的
主装置
本产品的主装置由左、右基座音箱组成。
右基座音箱
g 红色指示灯
主装置切换为待机模式时亮起。
遥控器
本部分包括遥控器的概述。
a
b
a 显示面板
b
切换至蓝牙模式 (仅限于主装置)。
c 音量
d
e
f
4
+/-
增大或减小音量。
切换各种输入源。
打开主装置或将其切换为待机模式。
标签
NFC
用
连接。
ZH-CN
设备轻击此标签可实现蓝牙
NFC
g
f
e
d
c
a
打开主装置或将其切换为待机模式。
b 来源按钮
•
HDMI ARC
HDMI ARC
•
HDMI 1
IN 1
•
HDMI 2
IN 2
•
COAX
连接。
连接。
连接。
：将来源切换至
连接。
：将来源切换至
：将来源切换至
：将音频来源切换至同轴
HDMI
HDMI
•
OPTICAL
纤连接。
•
AUDIO IN
或
AUDIO IN （3.5
插孔）模式。
•
USB
•
切换至蓝牙模式 (仅限于主装
:
置)。
•
SOURCE
c /
跳至上一首或下一首曲目（支持
蓝牙的播放）。
d
开始、暂停或继续播放（支持
牙的播放）。
e
BASS +/-
增大或减小低音。
f 音量控制
•
+/-
• ：静音或恢复音量。
g 声音模式控制
择预设的声音模式。
MUSIC
：选择语音清晰声音模式，或
者选择
己）声音模式。
MOVIE
h
按下可增加或减少无线环绕音箱的音量
（仅适用于环绕音箱无线连接至主装置
即
SOD
i
增大或减小音频延迟。
j
打开或关闭夜间模式。
k
• 按住可启用聆听区校准。
• 按三次可启用无线环绕音箱位置
校准。
l
打开或关闭自动音量。
：将音频来源切换至光
：切换至
：切换至
：切换各种输入源。
：增大或减小音量
：为播放的视频或音频自动选
：选择立体声模式。
CLOSE TO ME
：选择环绕声模式。
模式已开启时的情况）。
USB
AUX
毫米
模式。
（靠近自
USB/
USB/
蓝
m
设置本产品的显示面板亮度。
n
增大或减小高音。
无线环绕音箱
本产品配备一对无线环绕音箱。
b
a
c
d
e
以上图示是其中一个无线环绕音箱的
*
概况。
a 音箱指示灯
• 环绕音箱未无线连接至主装置时，
红色灯和橙色灯会交替闪烁。
• 环绕音箱与主装置实现无线连接，
或电池电量充足或多于
白灯会点亮。
• 电池电量少于
点亮。
• 电池电量不足
烁。
• 环绕音箱充电时（环绕音箱插接至
主装置），橙色灯会点亮。
b
• 环绕音箱待机时，按下此键启动环
绕音箱。
• 按住此键环绕音箱进入待机模式。
c 按钮/指示灯
• 按下此键将环绕音箱切换至蓝牙
模式。
• 环绕音箱切换至蓝牙模式且未连接
蓝牙设备时，指示灯会闪烁。
• 环绕音箱切换至蓝牙模式且与蓝牙
设备实现连接时，指示灯会点亮。
d
按钮/指示灯
SOD
• 按下此键将环绕音箱切换至
模式（环绕音激活模式）。
30%
10%
30%
时，红色灯会
时，红色灯会闪
时，
SOD
ZH-CN
5
• 环绕音箱切换至
示灯会点亮。
e
环绕音箱操作无反应时，用别针按住此
键5秒将环绕音箱重置为默认设置。
注
SOD
模式时，指
接口
此节概述本产品上的可用接口。
左基座音箱
• 如果您按无线环绕音箱上的
则环绕音箱会与主装置断开无线连接
（即
无线重低音音箱
本产品配备一个无线重低音音箱。
SOD
模式关闭）。
a
b
c
按钮，
a 重低音音箱指示灯
• 重低音音箱和主装置之间未无线连
接或进行无线配对时，指示灯会快
速闪烁。
• 重低音音箱与主装置实现无线连接
时，指示灯会点亮。
• 重低音音箱进入待机模式或无线连
接断开4分钟后，指示灯会关闭。
b (连接)
按下此键可进入重低音音箱与主装置的
配对模式。
c
连接电源。
~
a
用随附的
箱连接。
b
AC MAINS~
连接电源。
右基座音箱
a
b
c
a
COAX
连接至电视或数字设备的同轴音频输
出插孔。
b
OPTICAL
连接至电视或数字设备的光学音频输
出插孔。
c
USB
• 连接至
• 升级此产品的软件。
ab
线缆与右基座音
DIN
d fe g
存储设备以播放音频
USB
媒体。
i
h
6
ZH-CN
d
HDMI IN 1
连接至数字设备上的
e
主装置操作无反应时，用别针按住此键
秒将本产品重置为默认设置。
5
f
HDMI IN 2
连接至数字设备上的
g
连接至电视的
h
用随附的
箱连接。
i
连接至电视或模拟设备的模拟音频输
出插孔（重复按遥控器上的
IN
源）。
DIN
键选择
AUDIO IN 或 AUX
HDMI
HDMI
HDMI (ARC)
线缆与左基座音
AUDIO
输出。
输出。
输入。
输入
连接
3
本节帮助您将本产品连接至电视和其他
设备。
有关本产品及附件的基本连接详细信息，
请参阅快速入门指南。
注
• 有关标识和电源功率，请参阅产品背面或底部的
型号铭牌。
• 在建立或更改任何连接之前，请确保所有设备均
已与电源插座断开连接。
连接主装置
用随附的
起，组成本机的主装置。有关详细信息，
请参阅快速入门指南。
注意
• 为避免损坏产品，将随附的
时，需确保正确的插入方向。
线缆将左右基座音箱连接一
DIN
线缆插入主装置
DIN
为环绕音箱充电
如果已将无线环绕音箱从主装置中拔
出，无线环绕音箱上的指示灯会指示其电
池电量。
• 白色
余
30%
• 红色
余不足
• 红色
耗尽，剩余不足
指示灯：电池电量充足或剩
LED
以上
指示灯：电池电量不足，剩
LED
30%
指示灯闪烁：电池电量几乎
LED
10%
ZH-CN
7
1 将左右环绕音箱插接至主装置（左、右
基座音箱）为环绕音箱充电。
2 打开主装置。
» 充电期间，无线环绕音箱上的橙色
会点亮。
LED
» 充满电后，无线环绕音箱上的橙色
会熄灭。
LED
注
• 无线环绕音箱充满电约需
与主装置手动配对连接
3
小时。
5 如果配对失败，请重复上述步骤。
注
• 如果无线环绕音箱接收不到主装置的音频（环绕音
箱的红色灯和橙色灯会交替闪烁），将环绕音箱插
接至主装置后再拔出，可再实现无线连接。
摆放音箱
为了获得最佳音效，请将所有音箱朝向座
位，并将各音箱放置于接近就坐时耳朵高
度的位置。
SUB
WOOFER
打开主装置、
无线环绕音箱
右基座音箱）自动配对，实现无线连接。
如果无线环绕音箱和无线重低音音箱接收不
到主装置发出的音频，就必须对
线环绕音箱
1 将无线环绕音箱插接至主装置。
2 打开主装置及重低音音箱。
3 按重低音音箱上的
接）按钮进入配对模式。
4 在
ARC
器上的
住
8
ZH-CN
无线环绕音箱
和重低音音箱会与主装置（左、
和重低音音箱
» 重低音音箱上的指示灯会快速
闪烁。
HDMI ARC
）下，在
，再按
BASS +
» 如果配对成功，重低音音箱上的指
» 如果配对失败，重低音音箱上的指
。
示灯会点亮。
示灯会缓慢闪烁。
和重低音音箱时，
进行手动配对。
CONNECT
模式（按
秒钟内先按
6
音量 +，然后按
1 次
主装置、
HDMI
2
（连
次遥控
无
注
• 环绕音效取决于房间形状和大小、墙壁和天花板
类型、窗户和反射面以及扬声器声学特性等诸多
因素。试验不同的音箱定位以找出适合您的最佳
摆放。
按照以下一般原则摆放音箱。
1 座位：
这是您聆听区域的中心。
RL
2 将主装置（左、右基座音箱）摆放在座
位前方。
3
4
环绕音箱（左/右）：
L/ R
将后部环绕音箱摆放于您座位的左右两
侧，要么齐平，要么稍后一点。
（重低音音箱）：
SUBWOOFER
将重低音音箱放置在电视左侧或右侧至
少一米远。与墙壁之间留出大约
米间隙。
厘
10
插接环绕音箱
您也可以将环绕音箱插接至主装置来聆听
音频，例如，观看电视节目和新闻。
连接电视的音频
将本产品连接至电视。您可以通过本产品
的扬声器收听电视节目的音频。
1 使用高速
HDMI
HDMI OUT (ARC)
上的
HDMI ARC
• 电视上的
可能有所不同。有关详细信息，请
参阅电视用户手册。
2 在电视上，请打开
• 如果电视上出现
题，请参阅电视的用户手册，确保
HDMI-CEC
根据需要联系电视制造商。
线缆，将本产品上的
接口。
HDMI ARC
HDMI-CEC
HDMI-CEC
设置正确无误；也可
3 按下本产品遥控器上的
启用
HDMI ARC
注
• 不保证本产品可与所有
互操作。
• 如果电视不兼容
以便通过本产品收听电视音频。
连接。
HDMI - CEC
HDMI ARC
TV
接口连接至电视
接口的标记
操作。
问
HDMI ARC
设备进行
，则连接音频线缆，
，
方案 1：通过
HDMI (ARC)
连接
至电视
最佳质量音频
本产品支持带音频回传通道
的
HDMI。在 ARC
使用一根
视音频。
所需组件
• 一根高速
• 您的电视支持
• 对于某些电视型号，可从电视的设置菜
HDMI
（详情参见电视的用户手册）。
CEC
单中启用外部扬声器输出（详情参见电
视的用户手册）。
线缆通过本产品来收听电
HDMI
HDMI ARC 和 HDMI-
(ARC)
功能的支持下，可以
线缆。
功能
方案 2：通过光纤线缆连接电视
最佳质量音频
TV
1 使用光纤线缆，将本产品上的
接口连接到电视上的光纤
OPTICAL
输出。
ZH-CN
9
• 电视上的数字光纤输出可能标记
为
OPTICAL OUT、SPDIF
SPDIF OUT
2 按下本产品遥控器上的
用光纤连接。
。
OPTICAL
或
，启
2 重复按本产品遥控器上的
，启用模拟音频连接。
IN
»
在本产品的显示屏幕上显
AUX
示。
AUDIO
方案 3：通过同轴线缆连接电视
最佳质量音频
TV
1 使用同轴线缆，将本产品上的
接口连接到电视上的同轴
COAXIAL
输出。
• 电视上的数字同轴输出可能标记
为
DIGITAL AUDIO OUT
2 按下本产品遥控器上的
同轴连接。
方案 4：通过模拟音频线缆连接
电视
基本质量音频
COAXIAL/DIGITAL OUT
COAX
。
，启用
或
连接其他设备的音频
您也可以通过本产品的扬声器来播放其他
设备的音频。
方案 1：通过光纤线缆连接其他
设备
最佳质量音频
1 使用光纤线缆，将本产品上的
接口连接到外部设备的光纤
OPTICAL
输出上。
• 外部设备上的数字光纤输出可能标
2 按下本产品遥控器上的
用光纤连接。
记为
OPTICAL OUT、SPDIF
SPDIF OUT
。
OPTICAL
或
，启
1 使用模拟音频线缆，将本产品
上的
AUDIO IN
插孔）连接到电视上的模拟音频
输出（红白色接口）。
• 电视上的模拟音频输出可能标记为
AUDIO OUT
10
ZH-CN
（3.5
。
毫米
TV
方案 2：通过同轴线缆连接其他
设备
最佳质量音频
1 使用同轴线缆，将本产品上的
接口连接到外部设备的同
COAXIAL
轴输出上。
• 外部设备上的数字同轴输出可能标
记为
或
COAXIAL/DIGITAL OUT
DIGITAL AUDIO OUT
2 按下本产品遥控器上的
同轴连接。
COAX
。
，启用
方案 3：通过模拟音频线缆连接其
他设备
基本质量音频
AUDIO OUT
RL
1 使用模拟音频线缆，将本产品
上的
AUDIO IN
插孔）连接到外部设备上的模拟音频
输出（红白色接口）。
• 外部设备上的模拟音频输出可能标
记为
AUDIO OUT
2 重复按本产品遥控器上的
，启用模拟音频连接。
IN
»
会显示在本产品的显示屏幕
AUX
上。
（3.5
毫米
。
AUDIO
1 使用高速
的
的
2 使用高速
HDMI OUT (ARC)
上的
• 打开电视和数字设备上的
HDMI
HDMI OUT
HDMI IN 1/2
HDMI
HDMI
功能（若有此功能）。有关详
CEC
情，请参阅电视和数字设备的用户
手册。
3 按下本产品遥控器上的
，启用
1/2
• 如果电视与
请在电视上选择正确的视频输入。
线缆，将数字设备上
接口连接至本产品上
。
线缆，将本产品上的
接口连接至电视
接口。
HDMI IN
HDMI IN 1/2
HDMI CEC
HDMI-
连接。
不兼容，
通过
HDMI
通过单一
顶盒、
台）连接至本产品。使用此方法连接设备
并播放文件或玩游戏时，
• 电视会自动显示视频，并且
• 音频自动在本产品上播放。
HDMI
DVD/
连接数字设备
连接将数字设备（例如机
蓝光光盘播放机或游戏控制
ZH-CN
11
空灵校准
4
步骤 1：校准聆听区
空灵校准用于实现以下便利性，同时优化
环绕音效体验。
• 您可以根据需要随意放置无线环绕音
箱。
• 根据就坐位置自动均衡无线环绕音箱
的摆放。
空灵校准包括两个步骤。
• 步骤
• 步骤
何时需要校准
• 如果是首次执行空灵校准，则依次执
• 如果您重新设计就坐位置布局，则依次
• 如果您重新定位无线环绕音箱的摆放，
开始之前
• 确保房间非常安静。
• 确保左右主装置音箱之间没有被障碍
• 将环绕音箱朝向主装置。
• 确保主装置音箱，环绕音箱可以完全“
• 左右主装置音箱之间的最小距离为
• 左右环绕音箱之间的最小距离为
：校准聆听区
1
：校准环绕音箱位置
2
行步骤
执行步骤
则单独执行步骤
（可以跳过步骤 1）。
物阻挡。
看到”对方，中间没有任何障碍物妨
碍视线。
0.8 米（2.6
（
（
英尺）。
和步骤 2。
1
和步骤 2。
1
2
英尺），最大距离为
英尺）。
10
英尺），最大距离为
2.6
3
0.8
6 米（20
米
米
1 将无线环绕音箱置于您最喜欢的两个座
位（如沙发上）上。
• 确保环绕音箱与主装置已实现无线
连接（按环绕音箱上的
SOD
）。
2 按住遥控器上的
钟会启用校准。
»
ZONE
板上。
» 您会听到无线环绕音箱发出校
准音。
CALIBRATION
（区域）将显示在显示面
3 等待校准音结束。
»
->SPEAKER
显示面板上。
4 然后，执行以下步骤
音箱位置）以完成并存储新设置。
（扬声器）将显示在
（校准无线环绕
2
3
秒
12
ZH-CN
步骤 2：校准无线环绕音箱 位置
使用您的产品
5
1 将无线环绕音箱置于您喜欢的位置。
• 确保环绕音箱与主装置已实现无线
连接（按环绕音箱上的
2 按
1 次
CALIBRATION
校准。
• 如果之前已完成了一次空灵校
准，之后只是改变了
音箱的摆放位置
（校准聆听区），这时可按
CALIBRATION
箱位置的
» 您会听到
无线环绕音箱
校准。
并跳过了步骤
直接进入
无线环绕
）。
SOD
可启用
1
次
3
环绕音
发出校准音。
3 等待校准音结束。
» 校准成功后，显示面板上会显
示
DONE
设置。
注
• 空灵校准约需
• 只有当无线环绕音箱未正确放置或所播放的音乐
中有较强的环绕音效时，空灵校准后的环绕音效
增强才会起效。
• 如果将左右环绕音箱的位置交换摆放，则在校准
期间会显示几秒钟
• 校准期间，您可以按
设置会恢复默认。
• 如果空灵校准失败，显示面板上会显示错误消息，例
如，
（失败），设置会恢复默认。
FAIL
• 如果空灵校准失败，再次尝试时，要确保完全满
足本章开头部分所述的空灵校准要点。
（完成）。并将存储新
分钟。
3
，然后才完成校准。
L<->R
CALIBRATION
取消校准，
本节将帮助您使用本产品播放各种来源的
媒体文件。
开始之前
• 根据快速入门指南和本用户手册中所
述，建立必要连接。
• 将本产品切换至对应其它设备的正确
来源。
调节音量
1 按
音量
• 要静音，请按
• 要恢复声音，请再次按
量
仅限于无线环绕音箱
1 环绕音箱与主装置实现无线连接（在
SOD
可增大或减小环绕音箱的音量。
可增大或减小音量。
+/-
。
+/-
模式下）后，按
。
或按
REAR VOL.+/-
音
选择声音
本节将帮助您选择适合于视频或音乐的
声音。
声音模式
根据您的视频或音乐需求选择预定义声音
模式。
• 按
MOVIE
适合观看电影。
• 按
MUSIC
声效果，适合聆听音乐。
• 按
VOICE
突出的效果。
• 按
SMART
择一种预设的声音模式（
MUSIC
可营造环绕声听觉体验，
可营造双声道或多声道立体
可产生使人声听起来更清晰
可根据音频内容自动选
MOVIE，
VOICE
），优化音效。
或
ZH-CN
13
CLOSE TO ME
要享受极致清晰的声音而不打扰邻近的
人，请将无线环绕音箱
靠近自己，然后启用该功能（主装置
将会静音）。
注
• 该功能仅在环绕音箱与主装置无线连接（
式打开）时适用。
• 打开
CLOSE TO ME
后，
MOVIE
1 按住
VOICE
»
CLOSE TO ME
显示面板上滚动一次。
» 主装置会静音。
2 要退出该声音模式，再次按住
秒钟。
3
» 将切换至上次已选的声音模式。
（靠近自己）
（靠近自己）功能
和
按钮的功能会被禁用。
MUSIC
秒钟可启用该功能。
3
（靠近自己）会在
SOD
VOICE
均衡器
更改本产品的高频（高音）和低频
（低音）设置。
1 按
频率。
TREBLE +/-
或
BASS +/-
可更改
1 按
AUTO VOL.
音量。
» 打开自动音量调衡时，
VOLUME
一次。
» 关闭自动音量调衡时，
VOLUME
一次。
模
开启或关闭自动
ON AUTO
会在显示面板上滚动
OFF AUTO
会在显示面板上滚动
夜间模式
在播放音频时，夜间模式可降低响亮声音
的音量，以达到安静聆听的效果。夜间模
式仅适用于杜比数字音轨。
1 按
NIGHT
» 打开夜间模式时，
在显示面板上短暂显示。
» 关闭夜间模式时，
在显示面板上短暂显示。
注
• 如果自动音量功能设置为开启，夜间模式将不能
启用。
MP3
播放器
开启或关闭夜间模式。
ON NIGHT
OFF NIGHT
会
会
同步视频和音频
如果音频和视频不同步，请延迟音频以匹
配视频。
1 按
AUDIO SYNC +/-
同步。
•
AUDIO SYNC +
迟，
延迟。
AUDIO SYNC -
将音频与视频
可增加声音延
可减少声音
自动音量调衡
切换至不同来源时，打开自动音量调衡后
可保持音量恒定。
其还可以压缩声音动态、增大安静场景的
音量及减小大声场景的音量。
14
ZH-CN
连接
音乐。
所需组件
• 一个
• 一根
1 使用
播放器以播放您的音频文件或
MP3
播放器。
MP3
毫米立体声音频线缆。
3.5
毫米立体声音频线缆，
3.5
将
AUDIO IN
播放器连接至本产品上的
MP3
接口。
2 反复按遥控器上的
»
3 按
MP3
频文件或音乐。
• 在
置在最大音量的
MP3
会在显示板上显示。
播放器上的按钮选择和播放音
播放器上，建议将音量设
AUDIO IN
范围内。
80%
。
USB
欣赏音乐
MP3
所需组件
• 格式为
1 将
2 按遥控器上的
存储设备
存储设备中音乐，例如
USB
播放器和
合海量存储类的
USB
USB
FAT 或 NTFS
存储设备连接至本产品。
闪存等等。
存储设备。
USB
。
USB
文件系统，并符
3 使用遥控器控制播放。
• 按下
播放。
• 按下
个曲目。
• 在
列任一播放模式。
•
•
•
•
注
• 本产品可能不兼容某些类型的
• 如果您使用
功能阅读器，则可能无法识别
• 不支持数码相机
• 不要在读取文件时移除
• 不支持受
• 支持
USB
可开始、暂停或继续
或
USB
曲目。
中的所有曲目。
SHUFFLE
夹中的曲目。
放模式。
USB
DRM
端口：5 伏
可跳至上一个或下一
播放期间，按
：重复播放一个文件夹
：随机播放一个文件
：退出重复或随机播
延长线、
PTP 和 MTP
USB
保护的音乐文件（
，1
选择下
USB
：重复播放当前
存储设备。
USB
集线器或
USB
USB
协议。
存储设备。
安。
USB
存储设备。
）。
MP3
通过蓝牙播放音频
通过蓝牙，将本产品连接到蓝牙设备（如
iPad、iPhone、iPod touch、Android
或笔记本电脑），然后便可以通过本产品
的音箱来聆听该设备上存储的音频文件。
手机
所需组件
• 支持
• 主装置与蓝牙设备之间的最大操作范围约
• 音乐传输可能因设备与本产品之间的障碍物而中
• 如果要将本产品与其他蓝牙设备连接，按住遥控
A2DP、AVRCP
牙版本
为
10 米（30
注
的蓝牙设备。
4.1
英尺）。
断，如墙壁、设备的金属外壳或附近以相同频率
工作的其他设备。
器上的
便可断开当前连接的蓝牙设备。
蓝牙规格并具有蓝
主装置的蓝牙
1 按遥控器上的
模式。
»
将显示在显示面板上，持续闪烁。
BT
2 在蓝牙设备上，开启蓝牙，搜索并选择
Philips E6
牙功能，请参阅蓝牙设备用户手册）。
» 连接期间，显示面板上的
可将本产品切换至蓝牙
以开始连接（有关如何启用蓝
会闪烁。
BT
3 等待本产品发出蜂鸣音。
» 蓝牙连接成功时，
面板上。
» 如果连接失败，显示面板上的
多
4 选择并播放蓝牙设备上的音频文件或
5 要退出蓝牙功能，请选择其他来源。
持续闪烁。
音乐。
• 播放期间，如有通话接入，音乐播放会
暂停。通话结束后继续播放（该功能
的实现取决于所连接的蓝牙手机）。
• 如果蓝牙设备支持
可以按遥控器上的
目，或按
• 如果音乐传输中断，则将蓝牙设备移
近主装置。
» 切换回蓝牙模式后，蓝牙连接仍会处
于活动状态。
• 要断开当前蓝牙连接，请按住遥控器
上的
。
暂停/
将显示在显示
BT
AVRCP
跳至某首曲
/
继续播放。
会
BT
规格，您
ZH-CN
15
单个环绕音箱的蓝牙
可将一个环绕音箱作为独立于主装置的单
个蓝牙音箱使用。
1 按左或右环绕音箱上的
至蓝牙模式。
» 左或右环绕音箱上的
闪烁。
按钮可切换
指示灯会
2 在蓝牙设备上，打开蓝牙功能，搜索和
选择左或右环绕音箱的名称，并进行连
接（有关如何启用蓝牙，请参阅蓝牙设
备用户手册）。
•
Philips E6 -L
Philips E6 -R
» 连接期间，左或右环绕音箱上的
指示灯会闪烁。
3 等待环绕音箱上的
» 如果连接成功，会听到连接音，并
且环绕音箱上的
» 如果连接失败，环绕音箱上的
示灯会闪烁。
代表左环绕音箱；
代表右环绕音箱。
指示灯亮起。
指示灯会亮起。
指
4 选择并播放蓝牙设备上的音频文件或
音乐。
• 播放期间，如有通话接入，音乐播
放会暂停。通话结束后继续播放
（该功能的实现取决于所连接的蓝
牙手机）。
• 如果音乐传输中断，则将蓝牙设备
移近正使用的环绕音箱。
5 要退出蓝牙模式，按环绕音箱上的
按钮。
SOD
» 切换回蓝牙模式后，蓝牙连接便会
恢复。
• 要断开当前蓝牙连接，请按住环绕
音箱上的
按钮。
注
• 遥控器的功能不适用于单个蓝牙音箱（即左或右
环绕音箱）。
立体声环绕音箱的蓝牙
也可将左右两个环绕音箱进行配对，合并
成独立于主装置的一个整体，产生具立体
声效果的蓝牙播放。
此功能中，左环绕音箱为主音箱，右环绕
音箱为副音箱。
1 分别按左和右环绕音箱上的
将两个音箱切换至蓝牙模式。
• 确保左右环绕音箱已打开。
• 确保右环绕音箱已断开跟其它设备
的蓝牙连接。
» 左右环绕音箱上的
烁。
2 按左和右环绕音箱
的
按钮后进入配对模式。
» 左环绕音箱上的
右环绕音箱上的
这种指示说明右环绕音箱已连接至
左环绕音箱。
指示灯会闪烁，
指示灯会点亮。
3 在蓝牙设备上，开启蓝牙，搜索并选择
开始蓝牙连接（有关如何
Philips E6 -L
启用蓝牙功能，请参阅蓝牙设备用户
手册）。
» 左环绕音箱与蓝牙设备连接期间，
左环绕音箱上的
灯继续闪烁 。
按钮，
指示灯会闪
16
ZH-CN
4 等待左环绕音箱上的
» 如果左环绕音箱与蓝牙设备成功
连接，左环绕音箱上的
亮起。
» 如果左环绕音箱与蓝牙设备连接不
成功，左环绕音箱上的
持续闪烁。
指示灯亮起。
指示灯会
指示灯会
5 选择并播放蓝牙设备上的音频文件或
音乐。
• 播放期间，如有通话接入，音乐播
放会暂停。通话结束后继续播放
（该功能的实现取决于所连接的蓝
牙手机）
• 如果音乐传输中断，则将蓝牙设备
移近左环绕音箱。
6 要断开右环绕音箱与左环绕音箱的蓝牙
连接，按右环绕音箱上的
或按左环绕音箱上的
牙模式，或直接停止蓝牙播放。
• 要断开当前蓝牙连接，可按住左环
绕音箱的
。
SOD
按钮，
SOD
按钮退出蓝
2 用
直至本产品发出蜂鸣音。
• 首次连接时，某些移动设备会出现配
3 选择并播放
音乐。
• 要断开连接，请再次用
设备轻击主装置的
NFC
对提示，选择“是”进行连接。
» 蓝牙连接成功时，
面板上。
» 如果连接失败，显示面板上的
持续闪烁。
设备上的音频文件或
NFC
NFC
将显示在显示
BT
NFC
击主装置的
NFC
标签。
标签，
会
BT
设备轻
自动待机
播放所连接设备中的媒体时，如果按钮处于
不活动状态
备中的音频/视频，则本产品会自动切换至待
机模式。
分钟，并且未播放所连接设
15
注
• 遥控器的功能不适用于左右环绕音箱互相配对的
蓝牙播放。
通过
NFC
（近场通信）是一种用于手机等
NFC
设备之间进行短距离无线通信的技术。
所需组件
• 具有
• 要进行配对，请用
•
NFC
置的
NFC
注
功能仅适用于主装置，不适用于左和右环
NFC
绕音箱。
1 在蓝牙设备上启用
息，请参阅设备用户手册）。
连接蓝牙
功能的蓝牙设备。
设备轻击主装
NFC
标签。
（有关详细信
NFC
NFC
设置显示屏亮度
您可以反复按
示亮度级别。
如果选择
未操作任何按钮，本产品的屏幕将会
关闭，不显示信息。
DIM 0
改变本产品显示面板的显
DIM
，并且
10
秒钟内
应用出厂设置
如果本产品操作无反应，可将本产品重置为
出厂时设定的默认设置。
1 分别在右基座音箱和左右环绕音箱上，
用别钉按住
设置。
» 恢复出厂设置完成后，产品将自动关
闭并重启。
RESET
按钮5秒可恢复出厂
ZH-CN
17
更新软件
6
为了获得最佳功能及支持，请使用最新软
件更新您的产品。
检查软件版本
注意
• 在软件更新过程中，请勿关闭电源或移除
储设备，因为这样做可能会损坏本产品。
USB
存
在
HDMI ARC
下，在 6秒钟内先按
再按
1 次
» 软件版本号将显示在显示面板上。
通过
USB
1 在
www.philips.com/support
最新的软件版本。
• 搜索您的型号，然后单击“软件和
驱动程序”。
2 将软件下载到
a 将下载的文件解压，需确保解压后
的文件夹名为 “
b 将“
3 将
USB
USB
4 按下
HDMI ARC
5 在遥控器上，在
再按一下 音量 +，然后按住
» 更新过程中，显示板会显示“
XX
度的百分比。
» 更新完成，本产品会自动关闭并重
新打开。
» 如果更新失败，显示板会显
示“
产品会自动关闭并重新打开，并会
提示要重新启动更新。
模式（按
TREBLE -
HDMI ARC
次遥控器上的
2
，然后按住
设备更新软件
存储设备上。
USB
”。
UPG
”文件夹放在根目录中。
UPG
存储设备连接至本产品上的
接口。
HDMI ARC
“，“XX”指的是完成更新进
ERROR
，将本产品切换至
来源。
秒钟内先按两下
6
”（失败），然后本
BASS -
上检查
MOVIE
）
，
。
UPG
。
，
18
ZH-CN
产品规格
7
注
• 规格和设计如有更改，恕不另行通知。
• 内置扬声器：
• 左/右声道：
个低音扬声器 （
2
欧姆）
8
米/1英寸
• 中声道
: 2
米/3英寸
76.2 毫米/3英寸,
个高音扬声器 （
+ 2
欧姆）
, 8
个全频
(76.2
, 8 欧姆)
毫
25.4
毫
功放器
• 总输出功率：
（
+/- 0.5
• 频率响应：
20 赫兹 - 20
• 信噪比：
• 输入灵敏度：
•
AUDIO IN：500
•
AUX：1000
192 瓦 RMS
分贝，
10% THD
千赫兹
/ +/- 3
> 65 dB (CCIR) /（A
毫伏
毫伏
音频
•
数字音频输入
S/PDIF
• 同轴：
• 光纤：
IEC 60958-3
TOSLINK
USB
• 兼容性：高速
• 类别支持：
• 文件系统：
• 支持的音频文件格式：
.wav, .m4a, .flac, .ogg, .ape, .dsf, .dff
蓝牙
• 蓝牙规格：
• 蓝牙版本：
USB (2.0)
海量存储类
USB
FAT16、FAT32、NTFS
.aac, .mka, .mp3,
A2DP、AVRCP
4.1
）
分贝
加权）
(MSC)
环绕音箱
• 阻抗：8 欧姆
• 扬声器驱动器：
2 个 63.5
• 尺寸（宽
毫米（
x 高 x
2.5英寸)
厚）：
161 x 111 x 161 毫米
• 重量：1千克/个
重低音音箱
• 电源：
• 功耗：
• 待机功耗：
• 阻抗：4 欧姆
• 扬声器驱动器：1 个
• 尺寸（宽
110-240 伏；50-60
瓦
30
≤ 0.5 瓦
（
英寸）低音扬声器
6.5
x 高 x
厚）：
222 x 441 x 222 毫米
• 重量：
5.4
千克
遥控器电池
• 2 节
1.5 伏 AAA-R03
全频
赫兹
165 毫米
主装置（左右基座音箱）
• 电源：
• 功耗：
• 待机功耗：
• 尺寸（宽
110-240 伏；50-60
瓦
70
≤ 0.5 瓦
x 高 x
厚）：
161 x 302 x 161 毫米
• 重量：
2.4 千克/
个
赫兹
ZH-CN
19
故障种类和处
8
理方法
警告
• 存在触电危险。切勿拆下本产品的外壳。
为保证保修的有效性，切勿尝试自行维修
本产品。
如果在使用本产品时遇到问题，请在申请
服务之前检查以下事项。如果仍遇到问
题，请在
上获得支持。
www.philips.com/support
主装置
本产品上的按钮不起作用。
• 将本产品的电源断开几分钟，然后重
新连接。
声音
本产品的音箱没有声音。
• 用音频线缆将本产品连接至电视或其他
设备。然而，在以下情况下，无需单独
的音频连接：
• 本产品和电视通过
行连接，或
• 当设备连接至本产品的
接口时。
• 确保将本产品上的音频输入连接至电视
或其他设备上的音频输出。
• 将本产品重置为出厂设置。
• 在遥控器上，选择正确的音频输入。
• 确保本产品未静音。
无线环绕音箱没有声音。
• 确保无线环绕音箱已打开。按无线环绕
音箱的
• 将无线环绕音箱插接至主装置，为电
池充电。
• 如果要将环绕音箱与主装置实现无线
连接，确保按下无线环绕音箱的
按钮。
。
HDMI ARC
页面
HDMI IN
SOD
进
• 如果要将无线环绕音箱作为单个蓝牙音
箱使用，确保无线环绕音箱与设备已实
现蓝牙。
无线重低音音箱和无线环绕音箱接收不到
主装置发出的音频。
• 在无线重低音音箱和主装置之间进行手
动配对，实现无线连接。
• 将无线环绕音箱插接至主装置，再拔出
可实现无线连接。
声音失真或有回声。
• 如果通过本产品播放电视的音频，确保
将电视静音。
音频和视频不同步。
• 按
AUDIO SYNC +/-
同步。
将音频与视频
蓝牙
设备无法与本产品连接。
• 设备不支持本产品所需的兼容规格。
• 您尚未启用设备的蓝牙功能。有关如何
启用该功能，请参阅设备的用户手册。
• 设备未正确连接。正确连接设备。
• 本产品已连接其他蓝牙设备。断开连接
的设备，然后重试。
播放所连接蓝牙设备中的音频时音质
较差。
• 蓝牙接收质量较差。将设备移近本产
品，或移除设备与本产品之间的任何
障碍物。
所连接的蓝牙设备时断时续。
• 蓝牙接收质量较差。将设备移近本产
品，或移除设备与本产品之间的任何
障碍物。
• 关闭蓝牙设备的
干扰。
• 对于某些蓝牙设备，为节省电量可能会
自动禁用蓝牙连接。这并不表示本产品
存在故障。
Wi-Fi
功能以避免
20
ZH-CN
NFC
设备无法通过
• 确保设备支持
• 确保设备已启用
息，请参阅设备用户手册）。
• 要进行配对，请用
品的
NFC
空灵校准
为何需要进行空灵校准？
• 空灵校准可在无线环绕音箱未正确放置
时优化环绕声体验。
空灵校准成功后，环绕声改善并不明显。
• 只有无线环绕音箱未正确放置或所播放
的音乐中有较强的环绕音效时，校准后
的环绕音效增强才会起效。
显示面板上显示错误消息。
• 如果空灵校准失败，则会显示以下任一
错误消息。有关重新校准的详细信息，
请参阅第四章（空灵校准）的内容。
•
•
•
（失败）：表示无线环绕音
FAIL
箱未处于
围，或者有一些障碍物使得主装置
和无线环绕音箱之间无法完全“看
到”对方。
BATT LOW
表示无线环绕音箱的电池电量
不足。
ERROR
音箱未从主装置里拔出。
与本产品连接。
NFC
。
NFC
（有关详细信
NFC
设备轻击本产
NFC
标签。
模式或超出校准范
SOD
（电池电量不足）：
（错误）：表示无线环绕
ZH-CN
21
Contents
1 Important 2
Safety 2
Care for your product 3
Care of the environment 3
Help and support 3
Open source software 3
2 Your product 4
Main unit 4
Remote control 4
Wireless surround speakers 5
Wireless subwoofer 6
Connectors 7
3 Connect 8
Connect the main unit 8
Charge speakers 8
Manual pair-up with the main unit 8
Place speakers 9
Connect audio from TV 9
Connect audio from other devices 11
Connect digital devices through HDMI 12
4 Spatial calibration 13
Step 1: calibrate the listening zone 13
Step 2: calibrate the surround speaker
position 14
6 Update software 20
Check software version 20
Update software via USB 20
7 Productspecications 21
8 Troubleshooting 22
5 Use your product 15
Adjust the volume 15
Choose your sound 15
MP3 player 16
USB storage devices 16
Play music via Bluetooth 17
Connect Bluetooth via NFC 19
Auto standby 20
Set display brightness 20
Apply factory settings 20
1EN
1 Important
Read and understand all instructions before you
use your product. If damage is caused by failure
to follow instructions, the warranty does not
apply.
Safety
Riskofelectricshockorre!
• Before you make or change any
connections, make sure that all devices are
disconnected from the power outlet.
• Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Consumer Care to
have the product checked before use.
• Never place the product and accessories
near naked ames or other heat sources,
including direct sunlight.
• Never inser t objects into the ventilation
slots or other openings on the product.
• Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
• Batteries (battery pack or batteries
installed) shall not be exposed to excessive
heat such as sunshine, re or the like.
• Disconnect the product from the power
outlet before lightning storms.
• When you disconnect the power cord,
always pull the plug, never the cable.
Riskofshortcircuitorre!
• For identication and supply ratings, see
the type plate at the back or bottom of
the product.
• Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.
Riskofinjuryordamagetothisproduct!
• Never place the product or any objects
on power cords or on other electrical
equipment.
• If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
• Par ts of this product can be made of
glass. Handle with care to avoid injury and
damage.
Riskofoverheating!
• Never install this product in a conned
space. Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
Riskofcontamination!
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• Danger of explosion if batteries are
incorrectly replaced. Replace only with the
same or equivalent type.
• Remove batteries if they are exhausted or
if the remote control is not to be used for
a long time.
• Batteries contain chemical substances, they
should be disposed of properly.
Riskofswallowingbatteries!
• The product/remote control may contain
a coin/button type battery, which can be
swallowed. Keep the battery out of reach
of children at all times! If swallowed, the
battery can cause serious injury or death.
Severe internal burns can occur within two
hours of ingestion.
• If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.
2 EN
• When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after
you replace the battery.
• If the batter y compar tment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.
This is CLASS II apparatus with double
insulation, and no protective earth provided.
Care for your product
• Use only microber cloth to clean the
product, such as removing dust and
shedding accumulated on the speaker cloth.
Do not use any cleaning solvent to clean
the wooden panels and speaker cloth.
• Clean the leather handles with a slightly
damp soft cloth which is dipped in a
leather cleaning solution, then buff the
leather with a dry soft cloth.
• The wooden panels and leather handles
may vary on color and grain pattern due
to the use of natural materials.
Care of the environment
Disposal of your old product
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Do not throw away the product with the normal
household waste at the end of its life, but hand
it in at an ofcial collection point or recycling. By
doing this, you help to preserve the environment.
Help and support
For extensive online support, visit
www.philips.com/support to:
• download the user manual and the quick
start guide
• watch video tutorials (available only for
selected models)
• nd answers to frequently answered
questions (FAQs)
• email us a question
• chat with our suppor t representative.
Follow the instructions on the website to select
your language, and then enter your product
model number.
Alternatively, you can contact Consumer Care
in your country. Before you contact, note down
the model number and serial number of your
product. You can nd this information on the
back or bottom of your product.
Open source software
This product contains software licensed under
an open source license. For acknowledgements
and license texts, please refer to your product’s
user manual on www.philips.com/support.
Gibson Innovations Limited hereby offers
to deliver, upon request, a copy of the
corresponding source code for the open source
software packages used in this product for
which such offer is requested by the respective
licenses. This offer is valid up to three years after
product purchase. To obtain source code, please
contact open.source-gi@gibson.com. If you
prefer not to use email or if you do not receive
conrmation receipt within a week after mailing
to this email address, please write to Open
Source Team, Gibson Innovations Limited, 5/F
Philips Electronics Building, 5 Science Park East
Avenue, Hong Kong Science Park, Shatin, N.T.
Hong Kong.
3EN
2 Your product
b
a
c
d
f
h
i
j
k
e
g
n
l
m
Congratulations on your purchase, and
welcome to Philips! To fully benet from the
support that Philips offers, register your product
at www.philips.com/welcome.
Main unit
The main unit of this product is comprised of
left and right base speakers.
Right base speaker
g Red LED
Lights up when the main unit is switched
to standby.
Remote control
This section includes an overview of the
remote control.
a Display panel
b
c +/- (Volume)
d
e
f NFC tag
a
b
Switch to Bluetooth mode (main unit only).
Increase or decrease volume.
Toggle through all sources.
Switch the main unit on or to standby.
Tap the NFC-enabled device on the tag for
Bluetooth connection.
g
f
e
d
c
a
Switch the main unit on or to standby.
b Source buttons
• HDMI ARC: Switch your source to the
HDMI ARC connection.
• HDMI 1: Switch your source to the
HDMI IN 1 connection.
• HDMI 2: Switch your source to the
HDMI IN 2 connection.
4 EN
• COAX: Switch your audio source to
the coaxial connection.
• OPTICAL: Switch your audio source
to the optical connection.
• AUDIO IN: Toggle audio source
between AUX or AUDIO IN
connection (3.5mm jack).
• USB: Switch to USB mode.
• : Switch to Bluetooth mode (main
unit only).
• SOURCE: Toggle through all sources.
c /
Skip to the previous or next track (for
USB/ Bluetooth).
d
Start, pause or resume play (for USB/
Bluetooth).
e BASS +/-
Increase or decrease bass on the main unit.
f Volume control
• +/-: Increase or decrease volume.
• : Mute or restore volume.
g
: Automatically select a predened
sound mode to suit your video or music.
: Select stereo sound mode.
: Select voice clarity or
(close to me) sound mode.
: Select surround sound mode.
h
Press to increase or decrease volume
of the wireless surround speakers (only
applicable when the surround speakers are
wirelessly connected to the main unit (or
SOD mode switches on)).
i
Increase or decrease audio delay.
j
Turn night mode on or off.
k
• Press and hold to trigger calibration for
listening zone.
• Press three times to trigger calibration
for the wireless surround speakers
position.
l
Turn auto volume on or off.
m
Set the brightness of the display panel for
this product.
n
Increase or decrease treble on the main
unit.
Wireless surround speakers
This product comes with a pair of wireless
surround speakers.
b
a
c
d
* The illustration above is for either of wireless
surround speakers.
a Speaker LED
• Blinks in red and orange alternatively
if the surround speaker is not
wirelessly connected to the main unit.
• Lights up white when the surround
speaker is wirelessly connected to the
main unit, or when the battery capacity
is full or more than 30% remaining.
• Lights up red when the battery
capacity is less than 30% remaining.
• Blinks red when the battery capacity is
less than 10% remaining.
• Lights up orange when the surround
speaker is being charged (only for the
surround speakers docked onto the
main unit).
e
5EN
b
• Press to turn on the surround speaker
if it automatically goes to standby.
• Press and hold to switch the surround
speaker to standby.
c button/LED
• Press to switch the surround speaker
to Bluetooth mode.
• The LED blinks when you switch the
surround speaker to Bluetooth and no
Bluetooth devices are connected.
• The LED lights up when you switch
the surround speaker to Bluetooth and
Bluetooth devices are connected.
d SOD button/LED
• Press to switch the surround speaker
to SOD (surround on demand) mode.
• The LED lights up white when the
surround speaker is switched to SOD
mode.
e
In case of no response from the surround
speaker, press and hold with a pin for
5 seconds to reset the surround speaker
to the default settings.
Note
• If you press the button on the surround speaker, the
surround speaker disconnects the main unit (or SOD
mode switches off).
Wireless subwoofer
This product comes with a wireless subwoofer.
a
b
c
a Subwoofer indicator
• Blinks when the subwoofer is not
connected, or being connected, to the
main unit.
• Lights up when the subwoofer is
connected to the main unit.
• Lights off when the subwoofer goes
to standby, or wireless connection is
disconnected for 4 minute.
b (connect)
Press to enter the pairing mode for
connection with the main unit.
c ~
Connect to the power supply.
6 EN
Connectors
This section includes an overview of the
connectors available on this product.
On the left base speaker
a
Connect to the right base speaker with the
supplied DIN cable.
b AC MAINS~
Connect to the power supply.
On the right base speaker
ab
d HDMI IN 1
Connect to the HDMI output on a digital
device.
e
In case of no response from the main unit,
press and hold with a pin for 5 seconds to
reset this product to the factory settings.
f HDMI IN 2
Connect to the HDMI output on a digital
device.
g
Connect to the HDMI (ARC) input on the
TV.
h
Connect to the left base speaker with the
supplied DIN cable.
i
Connect to an audio output on a device
via AUDIO IN or AUX source (by pressing
repeatedly AUDIO IN on the remote
control).
a
b
c
a COAX
Connect to a coaxial audio output on the
TV or a digital device.
b OPTICAL
Connect to an optical audio output on the
TV or a digital device.
c USB
• Connect to a USB storage device for
audio media play.
• Upgrade software of this product.
d fe g
i
h
7EN
3 Connect
This section helps you connect this product to a
TV and other devices, and then set it up.
For information about the basic connections of
this product and accessories, see the quick start
guide.
Note
• For identication and supply ratings, see the type plate
at the back or bottom of the product.
• Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Connect the main unit
With the supplied DIN cable, connect the left
base speaker to the right base speaker as main
unit. See the quick start guide for details.
Caution
• When you plug the supplied DIN cable into the
connectors on the main unit, make sure that you plug
the DIN cable in the correct orientation to prevent
product damage.
Charge speakers
If the wireless surround speaker is undocked
from the main unit, its battery level is indicated
by the indicators on the wireless speaker.
• Light up white: full battery or more than
30% capacity remaining
• Light up red: low battery level, less than
30% remaining
• Blink red: near empty, less than 10%
remaining
1 Dock the left and right wireless speakers
onto the main unit (left and right base
speakers) to charge the speakers.
2 Turn on the main unit.
» During charging, the orange LED on
the wireless speaker lights up.
» When fully charged, the orange LED
on the wireless speaker turns off.
Note
• It may take around 3 hours to fully charge the speakers.
Manual pair-up with the main unit
The wireless speakers and subwoofer
automatically pair up with the main unit (left
and right base speakers) for wireless connection
when you turn on the main unit, the speakers
and the subwoofer.
If audio from the main unit cannot be heard
through the wireless speakers and subwoofer,
manual pair up with the main unit is required.
1 Dock the wireless surround speakers onto
the main unit.
2 Turn on the main unit and the subwoofer.
3 Press the (connect) button on
the subwoofer to enter the pairing mode.
» The indicator on the subwoofer blinks
quickly.
8 EN
4 In HDMI ARC mode (press HDMI ARC),
within six seconds, on the remote control,
press twice then Volume + once, and
then hold down BASS +.
» If the pairing succeeds, the indicator on
the subwoofer lights up.
» If the pairing fails, the indicator on the
subwoofer blinks slowly.
5 If the pairing fails, repeat the steps above.
Note
• If there is no sound from the wireless surround
speakers which are undocked (or the LED on the
wireless surround speaker blinks in red and orange
alternatively), you may dock then undock the surround
speakers to make wireless connection with the main
unit.
Place speakers
Note
• Surround sound depends on factors such as room
shape and size, type of wall and ceiling, windows and
reective surfaces, and speaker acoustics. Experiment
with the speaker positions to nd the optimum setting
for you.
Follow these general guidelines for speakers
placement.
1 Seating position:
This is the center of your listening area.
2 Place the main unit (left and right base
speakers) in front of the seating position.
3 L/ R surround speakers (left/right):
Place the rear surround speakers to the
left and right side of your seating position,
either in line with it or slightly behind it.
4 (subwoofer):
Place the subwoofer at least one meter
to the left or right of the TV. Leave about
10-centimeter clearance from the wall.
For best sound effect, position all the speakers
towards the seating position and place them
close to your ear level (seated).
SUB
WOOFER
Dock the surround speakers
You can also dock your surround speakers onto
the main unit to listen to audio, for example,
watching TV shows and news.
Connect audio from TV
Connect this product to a TV. You can listen to
RL
audio from TV programs through the speakers
of this product.
9EN
Option 1: Connect to TV through
HDMI (ARC)
Best quality audio
This product supports HDMI with Audio
Return Channel (ARC). With the ARC feature,
you can hear the TV audio through this product
by using a single HDMI cable.
What you need
• A High Speed HDMI Cable.
• Your TV supports both HDMI ARC and
HDMI-CEC (see the TV user manual for
details).
• For some TV models, enable the external
speaker output from the TV setting menu
(see the TV user manual for details).
TV
1 Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on this
product to the HDMI ARC connector on
the TV.
• The HDMI ARC connector on the TV
might be labeled differently. For details,
see the TV user manual.
2 On your TV, turn on HDMI-CEC
operations.
• For HDMI-CEC issues on your TV, see
the TV user manual to make sure that
the HDMI-CEC setup is correct, or
contact the TV manufacturer if needed.
3 Press HDMI ARC on the remote control
of this product to enable the HDMI ARC
connection.
Note
• 100% interoperability with all HDMI-CEC devices is not
guaranteed.
• If your TV is not HDMI ARC compliant, connect an
audio cable to hear the TV audio through this product.
Option 2: Connect to TV through
optical cable
Best quality audio
TV
1 Using an optical cable, connect the
OPTICAL connector on this product to
the optical output on the TV.
• The digital optical output on the TV
might be labeled OPTICAL OUT,
SPDIF or SPDIF OUT.
2 Press on the remote control
of this product to enable the optical
connection.
Option 3: Connect to TV through
coaxial cable
Best quality audio
TV
10 EN
1 Using a coaxial cable, connect the
COAXIAL connector on this product to
the coaxial output on the TV.
• The digital coaxial output on the TV
might be labeled COAXIAL/DIGITAL
OUT or DIGITAL AUDIO OUT.
2 Press COAX on the remote control of this
product to enable the coaxial connection.
Option 4: Connect to TV through
analog audio cables
Basic quality audio
TV
1 Using an analog cable, connect the AUDIO
IN (3.5mm jack) on this product to the
analog audio output (red and white) on
the TV.
• The analog audio output on the
external device might be labeled
AUDIO OUT.
2 Press repeatedly AUDIO IN on the
remote control of this product to enable
the analog audio connection.
» AUX is displayed on the display panel
of this product.
Option 1: Connect to other device
through optical cable
Best quality audio
1 Using an optical cable, connect the
OPTICAL connector on this product to
the optical output on the external device.
• The digital optical output on the
external device might be labeled
OPTICAL OUT, SPDIF or SPDIF
OUT.
2 Press OPTICAL on the remote control
of this product to enable the optical
connection.
Option 2: Connect to other device
through coaxial cable
Best quality audio
Connect audio from other devices
You may also play audio from other devices
through the speakers of this product.
1 Using a coaxial cable, connect the
COAXIAL connector on this product to
the coaxial output on the external device.
• The digital coaxial output on the
external device might be labeled
COAXIAL/DIGITAL OUT or
DIGITAL AUDIO OUT.
2 Press COAX on the remote control of this
product to enable the coaxial connection.
11EN
Option 3: Connect to other device
through analog audio cables
Basic quality audio
AUDIO OUT
RL
1 Using an analog cable, connect the AUDIO
IN (3.5mm jack) on this product to the
analog audio output (red and white) on
the external device.
• The analog audio output on the
external device might be labeled
AUDIO OUT.
2 Press AUDIO IN on the remote control
of this product to enable the analog audio
connection.
» AUX is displayed on the display panel
of this product.
2 Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) - TO TV
connector on this product to the HDMI
connector on the TV.
• On your TV and the connected
device, turn on HDMI-CEC controls
(if available). For details, see the user
manual of the TV and the device.
3 Press HDMI 1/2 on the remote control
of this product to enable the HDMI IN
connection.
• If the TV is not HDMI-CEC compliant,
select the correct video input on your
TV.
Connect digital devices through HDMI
Connect a digital device such as a set-top box,
DVD/Blu-ray player, or games console to this
product through a single HDMI connection.
When you connect the devices in this way and
play a le or game, the
• video is automatically displayed on your
TV, and
• audio is automatically played on this
product.
1 Using a High Speed HDMI cable, connect
the HDMI OUT connector on your
digital device to the HDMI IN 1/2 on this
product.
12 EN
4 Spatial
calibration
Spatial calibration is used to achieve the
following convenience, and simultaneously
optimizes surround sound experience for it.
• Have freedom to place the wireless
surround speakers according to your need,
and
• automatically balance the placement of the
wireless surround speakers with respect to
your seating position.
The spatial calibration involves two steps.
• Step 1: calibrate the listening zone
• Step 2: calibrate the surround speaker
position
When to calibrate
• If you perform spatial calibration for the
rst time, perform Step 1 and Step 2 in
sequence.
• If you re-design your seating position,
perform Step 1 and Step 2 in sequence.
• If you re-locate the wireless surround
speakers, perform Step 2 independently
(Step 1 can be skipped).
Before you start
• Make sure that the room is fairly quiet.
• Make sure that there is no obstacle
between the left and right base speakers.
• Place the wireless surround speakers with
the speaker side facing towards the main
unit.
• Make sure that the main unit, the wireless
surround speakers can fully "see" each
other, no obstacle between them blocking
such view.
• The minimum distance between the left
and right base speakers is 0.8m (2.6'), the
maximum distance 3m (10').
• The minimum distance between the
wireless surround speakers and the main
unit is 0.8m (2.6'), the maximum distance
6m (20').
Step 1: calibrate the listening zone
This step is to optimize surround experience
through balance of your seating position.
1 Place the wireless surround speakers on
two seating positions you prefer most
(such as on a sofa).
• Make sure that the wireless surround
speakers are wirelessly connected
to the main unit (press SOD on the
wireless speaker).
2 Press and hold on the
remote control for three seconds to
trigger calibration.
» (zone) is displayed on the
display panel.
» You can hear the calibration tones
from the wireless surround speakers.
3 Wait until the calibration tones end.
» ->SPEAKER (speaker) is displayed on
the display panel.
4 Then perform the following Step 2
(calibrate the surround speaker position)
to complete and store the new settings.
13EN
Step 2: calibrate the surround speaker position
This step is to optimize surround experience
through balance of the placement of wireless
surround speakers.
1 Place the wireless surround speakers on
the position you prefer.
• Make sure that the wireless surround
speakers are wirelessly connected
to the main unit (press SOD on the
wireless speaker).
2 Press CALIBRATION once to trigger
calibration.
• Press CALIBRATIONthree times to
trigger calibration if you re-locate the
wireless surround speakers and skip
Step 1 (calibrate the listening zone)
after you completed a round of spatial
calibration previously.
» You can hear the calibration tones
from the wireless surround speakers.
3 Wait until the calibration tones end.
» If the calibration succeeds, DONE
(done) is displayed on the display
panel. And the new settings are stored.
Note
• Spatial calibration takes around three minutes.
• Surround sound improvement is only noticeable if the
wireless surround speakers were improperly placed, or
if there is strong surround effect in the music you play.
• If the wireless surround speakers are swapped in
placement, at the end of calibration L<->R is displayed
for few seconds, then the calibration completes.
• During calibration, you may press CALIBRATION
to cancel calibration, and the settings returns to the
default.
• If the spatial calibration fails, an error message is
displayed on the display panel, such as FAIL (fail), and
the settings returns to the default.
• If the spatial calibration fails, try the spatial calibration
again, and make sure that the calibration points
described at the beginning of this chapter are fully met.
14 EN
5 Use your
product
This section helps you use this product to play
audio from connected devices.
Before you start
• Make the necessar y connections described
in the quick start guide and the user
manual.
• Switch this product to the correct source
for other devices.
Adjust the volume
1 Press Volume +/- to increase or decrease a
volume level.
• To mute sound, press .
• To restore the sound, press again or
press Volume +/-.
For the wireless surround speakers only
1 When the wireless surround speakers
are wirelessly connected to the main unit
(in SOD mode), press to
increase or decrease a volume level.
• Press to create sound effect
which makes human voice more clear and
outstanding for listening.
• Press to automatically select a
predened sound mode ( ,
or ) based on input audio content
to optimize audio performance.
(close to me)
For ultimate clear sound without disturbing your
neighbors, place both the wireless surround
speakers close to you, and activate this feature
(to mute the main unit).
Note
• It is applicable only when the wireless surround
speakers are wirelessly connected to the main unit (or
SOD mode switches on).
• If (close to me) is turned on, the
functions for and buttons are disabled.
1 Press and hold for 3 seconds to
activate the feature.
» (close to me) scrolls
once on the display panel.
» The main unit is muted.
2 To exit this sound mode, press and hold
again for three second.
» The previous sound mode switches in.
Choose your sound
This section helps you choose the ideal sound
for your video or music.
Sound mode
Select predened sound modes to suit your
video or music.
• Press to create a surround listening
experience. Ideal for watching movie.
• Press to create two-channel or
multi-channel stereo. Ideal for listening to
music.
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of this product.
1 Press or to change
the frequency.
Synchronize video and sound
If the audio and video are not synchronized,
delay the audio to match the video.
15EN
1 Press to synchronize
the audio with the video.
• increases the sound
delay, and decreases
the sound delay.
Auto volume
Turn the auto volume on to keep the volume
constant when you switch to a different source.
It also compresses the sound dynamics,
increasing the volume for quiet scenes and
decreasing the volume for loud scenes.
1 Press to turn auto volume on
or off.
» When auto volume is turned on,
scrolls once on the
display panel.
» When auto volume is turned off,
scrolls once on the
display panel.
MP3 player
Connect your MP3 player to play your audio
les or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1 Using the 3.5mm stereo audio cable,
connect the MP3 player to the
connector on the right base speaker.
2 Press repeatedly.
» is displayed on the display
panel.
3 Press the buttons on the MP3 player to
select and play audio les or music.
• On the MP3 player, it is recommended
to set the volume in the range of 80%
maximum volume.
Night mode
For quiet listening, night mode decreases the
volume of loud sounds when audio is played.
Night mode is only available for Dolby Digital
soundtracks.
1 Press to turn night mode on or off.
» When night mode is turned on,
is displayed briey on the
display panel.
» When night mode is turned off,
is displayed briey on the
display panel.
Note
• If auto volume is set to turned on, you cannot enable
the night mode.
16 EN
USB storage devices
Enjoy audio on a USB storage device, such as an
MP3 player and USB ash memory, etc.
What you need
• A USB storage device that is formatted for
FAT or NTFS le systems, and complies
with the Mass Storage Class.
1 Connect a USB storage device to this
product.
2 Press USB on the remote control.
3 Use the remote control to control play.
• Press to star t, pause or resume
play.
• Press / to skip to the previous or
next track.
• During USB play, press USB to select
one of the following play modes.
• : repeat the current
track.
• : repeat all the tracks in
one folder.
• SHUFFLE: play randomly in one
folder.
• : exit repeat or shufe
play mode.
Note
• This product may not be compatible with certain types
of USB storage device.
• If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
• Digital camera PTP and MTP protocols are not
supported.
• Do not remove the USB storage device while it is
being read.
• DRM-protected music les (MP3) are not supported.
• Support a USB por t: 5V , 1A.
Play music via Bluetooth
Through Bluetooth, connect your product with
a Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
you can listen to the audio les stored on the
device through the speakers of this product.
What you need
• A Bluetooth device which suppor ts
Bluetooth prole A2DP, AVRCP and with
Bluetooth version as 4.1
• The operational range between the
main unit (left and right base speakers)
and a Bluetooth device is approximately
10 meters (30 feet).
Note
• The music streaming may be interrupted by obstacles
between the device and this product, such as wall,
metallic casing that covers the device, or other devices
nearby that operate in the same frequency.
• If you want to connect this product with another
Bluetooth device, break the current Bluetooth
connection.
Bluetooth on the main unit
1 Press on the remote control to switch
the main unit to Bluetooth mode.
» BT on the display blinks.
2 On the Bluetooth device, switch on
Bluetooth, search for and select Philips
E6 to start connection (see the user
manual of the Bluetooth device on how to
enable Bluetooth).
» During connection, BT on the display
panel blinks.
3 Wait until BT on the display lights up.
» If the connection succeeds, BT on the
display panel lights up.
» If the connection fails, BT on the
display panel blinks.
4 Select and play audio les or music on
your Bluetooth device.
• During play, if a call is coming,
music play is paused (this feature is
dependent on the connected mobile
phone).
• If your Bluetooth device supports
AVRCP prole, on the remote control
you can press / to skip to a track,
or press to pause/resume play.
• If music streaming is interrupted, place
the Bluetooth device closer to the
main unit.
5 To exit Bluetooth, select other source.
» When you switch back to Bluetooth
mode, Bluetooth connection resumes.
• To break the current Bluetooth
connection, press and hold on the
remote control.
17EN
Bluetooth on a single surround
speaker
You can use the left or right surround
speaker as a standalone Bluetooth speaker,
independently from the main unit.
1 Press the button on the left or right
surround speaker to switch to Bluetooth
mode.
» The LED on the left or right
surround speaker blinks.
2 On the Bluetooth device, switch on
Bluetooth, search for and select the name
of the left or right surround speaker to
start connection (see the user manual of
the Bluetooth device on how to enable
Bluetooth).
• Philips E6 -L stands for the left
surround speaker, Philips E6 -R for the
right surround speaker.
» During connection, the LED on the
left or right surround speaker blinks.
3 Wait until the LED on the surround
speaker lights up.
» If the connection succeeds, connection
tone is heard, and the LED on the
surround speaker lights up.
» If the connection fails, the LED on
the surround speaker blinks.
4 Select and play audio les or music on
your Bluetooth device.
• During play, if a call is coming,
music play is paused (this feature is
dependent on the connected mobile
phone).
• If music streaming is interrupted, place
the Bluetooth device closer to the
surround speaker.
5 To exit Bluetooth, press the SOD button
on the surround speaker.
» Then the surround speaker is wirelessly
re-connected to the main unit.
» When you switch back to Bluetooth
mode, Bluetooth connection resumes.
• To break the current Bluetooth
connection, press and hold the
button on the surround speaker.
Note
• The function of the remote control is not available to
this feature.
Stereo Bluetooth on wireless
speakers
You can also pair up the left and right surround
speakers with each other as a whole for
Bluetooth to create stereo effect, independently
from the main unit.
The left surround speaker functions as the
master speaker, and the right surround speaker
as the slave speaker.
1 Press the buttons on the left and right
surround speaker to switch both speakers
to Bluetooth mode.
• Make sure that both surround
speakers are turned on.
18 EN
• Make sure that the right surround
speaker is not currently connected
with other Bluetooth device.
» The LEDs on the left and right
surround speakers blink.
2 Press the buttons on the left and right
surround speakers to initialize pair-up.
» The LED on the left surround
speaker blinks, and the LED on
the right surround speaker lights up,
indicating that the right surround
speaker is connected to the left
surround speaker.
3 On the Bluetooth device, switch on
Bluetooth, search for and select Philips
E6 L to connect the left surround speaker
to the Bluetooth device (see the user
manual of the Bluetooth device on how to
enable Bluetooth).
» During connection between the left
surround speaker and the Bluetooth
device, the LED on the left surround
speaker still blinks.
4 Wait until the LED on the left surround
speaker lights up.
» If the connection between the left
surround speaker and the Bluetooth
device succeeds, the LED on the left
surround speaker lights up.
» If the connection between the left
surround speaker and the Bluetooth
device fails, the LED on the left
surround speaker still blinks.
5 Select and play audio les or music on
your Bluetooth device.
• During play, if a call is coming,
music play is paused (this feature is
dependent on the connected mobile
phone).
• If music streaming is interrupted, place
the Bluetooth device closer to the left
surround speaker.
6 To break pair-up of the right surround
speaker from the left surround speaker,
press the SOD on the right surround
speaker.
Or, to exit Bluetooth mode or stop
Bluetooth play, press the SOD on the left
surround speaker.
• Press and hold on the left surround
speaker to break the Bluetooth
connection.
Note
• The function of the remote control is not available to
this feature.
Connect Bluetooth via NFC
NFC (Near Field Communication) is a
technology that enables short-range wireless
communication between NFC-enabled devices,
such as mobile phones.
What you need
• A Bluetooth device with NFC function.
• For pairing, tap the NFC device on the
NFC tag of the right base speaker.
Note
• NFC feature is only available to the main unit, not
available to the left and right surround speakers.
1 Enable NFC on the Bluetooth device (see
the device' s user manual for details).
2 Tap the NFC device on the NFC tag of
this product until you hear a beep sound
from this product.
• Make sure that this product is switched
on from standby, and is currently
disconnected from other Bluetooth
device.
» The BT on the display panel lights up,
and the NFC device is connected to
this product via Bluetooth.
19EN
» If the connection fails, the BT on the
display panel blinks.
3 Select and play audio les or music on
your NFC device.
• To break the connection, tap again the
NFC device with the NFC tag on this
product.
6 Update software
To get the best features and support, update
your product with the latest software.
Check software version
Auto standby
When playing media from a connected device,
this product automatically switches to standby
after 15 minutes of button inactivity and no
audio/video play from a connected device.
Set display brightness
You can press DIM repeatedly to select a
different brightness level of the display panel on
this product.
If you select DIM 0, LED message is switched
off after 10 seconds of button inactivity.
Apply factory settings
In case of no response from this product, you
may reset this product to the default settings
programmed at the factory.
1 On the right base speaker and the wireless
surround speakers respectively, press and
hold with a pin for 5 seconds to
reset this product.
» When the factor y settings restore is
complete, the product automatically
switches off and restarts.
In HDMI ARC mode (press HDMI ARC), within
six seconds, on the remote control, press
twice then TREBLE - once, and then hold down
BASS -.
» The software version number is displayed
on the display panel.
Update software via USB
1 Check the latest software version on
www.philips.com/support.
• Search for your model and click on
“Software and drivers”.
2 Download the software into a USB storage
device.
a Unzipthedownloadedle,andmake
sure that the unzipped folder is
named “UPG”.
b Put the “UPG” folder in the root
directory.
3 Connect the USB storage device to the
(USB) connector on this product.
4 Press HDMI ARC to switch this product to
the HDMI ARC source.
5 On the remote control, within six seconds
press twice then Volume + once, and
then hold down MOVIE.
» During upgrade, “UPG XX” (upgrade)
is displayed on the display panel,
and “XX” indicates a percentage of
upgrade completion.
20 EN
» If the update is complete, this product
automatically turns off and on again.
» If the update fails, “ERROR”(error) is
displayed on the display panel, then this
product automatically turns off and on
again, and prompts you to re-trigger
the upgrade.
Caution
• Do not turn off the power or remove the USB storage
device when the software update is in progress because
you might damage this product.
7 Product
specifications
Note
• Specications and design are subject to change without
notice.
Amplier
• Total output power:
192W RMS (+/- 0.5 dB, 10% THD)
• Frequency response: 20 Hz-20 kHz / ±3 dB
• Signal-to-noise ratio:
> 65 dB (CCIR) / (A-weighted)
• Input sensitivity:
• AUDIO IN: 500 mV
• AUX: 1000 mV
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: USB Mass Storage Class (MSC)
• File system: FAT16, FAT32, NTFS
• Playable audio les: .aac, .mka, .mp3, .wav,
.m4a, .ac, .ogg, .ape, .dsf, .dff
Bluetooth
• Bluetooth proles: A2DP, AVRCP,
• Bluetooth version: V4.1
21EN
Main unit (left and right base speakers)
• Power supply: 110-240 V~, 50-60 Hz
• Power consumption: 70 W
• Standby power consumption: ≤ 0.5 W
• Dimensions (W x H x D):
161 x 302 x 161 mm
• Weight: 2.4 kg/each
• Built-in speakers
• Left/Right channel:
2 x woofer (76.2 mm/3", 8 ohm) +
2 x tweeter (25.4 mm/1", 8 ohm)
• Center channel: 2 x full-range
(76.2 mm/3", 8 ohm)
8 Troubleshooting
Warning
• Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at
www.philips.com/support.
Surround speakers
• Speaker impedance: 8 ohm
• Speaker drivers: 2 x 63.5 mm (2.5")
full range
• Dimensions (W x H x D):
161 x 111 x 161 mm
• Weight: 1.0 kg/each
Subwoofer
• Power supply: 110-240 V~, 50-60 Hz
• Power consumption: 30 W
• Standby power consumption: ≤ 0.5 W
• Impedance: 4 ohm
• Speaker drivers: 1 x 165 mm (6.5") woofer
• Dimensions (W x H x D):
222 x 441 x 222 mm
• Weight: 5.4 kg
Remote control batteries
• 2 x AAA-R03-1.5 V
Main unit
The buttons on this product do not work.
• Disconnect this product from the power
supply for a few minutes, then reconnect.
Sound
No sound from the speakers of this product.
• Connect the audio cable from this product
to your TV or other devices. However, you
do not need a separate audio connection
when:
• this product and TV are connected
through HDMI ARC connection, or
• a device is connected to the HDMI IN
connector on this product.
• Make sure that you connect the audio
input on this product to the audio output
on your TV or other devices.
• Reset this product to its factor y settings.
• On the remote control, select the correct
audio input.
• Make sure that this product is not muted.
No sound from the wireless surround
speakers.
• Make sure that the wireless surround
speaker is turned on. Press on the
wireless surround speaker.
• Dock the wireless surround speakers onto
the main unit to charge the battery.
22 EN
• If you intend the wireless surround speaker
to wirelessly connect to the main unit,
make sure that you press the SOD button
on the wireless surround speaker.
• If you intend the surround speaker to be
a standalone Bluetooth speaker, make sure
that you connect the surround speaker to
a Bluetooth device.
Audio from the main unit cannot be heard
through the subwoofer and the wireless
surround speakers.
• Manually pair up the subwoofer with the
main unit.
• Re-dock the wireless surround speakers
onto the main unit to pair up the surround
speakers with the main unit.
Distorted sound or echo.
• If you play audio from the TV through this
product, make sure that the TV is muted.
Audio and video are not synchronized.
• Press AUDIO SYNC +/- to synchronize
the audio with the video.
The connected Bluetooth device connects and
disconnects constantly.
• The Bluetooth reception is poor. Move the
device closer to this product, or remove
any obstacle between the device and this
product.
• Turn off Wi-Fi function on the Bluetooth
device to avoid interference.
• For some Bluetooth, the Bluetooth
connection can be deactivated
automatically to save power. This does not
indicate any malfunction of this product.
NFC
A device cannot connect with this product via
NFC.
• Make sure that the device is suppor ted by
NFC.
• Make sure that NFC is enabled on the
device (see the device' s user manual for
details).
• For pairing, tap the NFC device on the
NFC tag of this product.
Bluetooth
A device cannot connect with this product.
• The device does not suppor t the
compatible proles required for this
product.
• You have not enabled the Bluetooth
function of the device. See the user manual
of the device on how to enable the
function.
• The device is not correctly connected.
Connect the device correctly.
• This product is already connected with
another Bluetooth device. Disconnect the
connected device, then try again.
Quality of audio play from a connected
Bluetooth device is poor.
• The Bluetooth reception is poor. Move the
device closer to this product, or remove
any obstacle between the device and this
product.
Spatial calibration
Why spatial calibration is needed?
• Spatial calibration optimizes surround
sound experience if your portable left and
right speakers (surround) are not properly
placed.
Improvement in surround sound is not
noticeable after successful spatial calibration.
• Surround sound improvement is only
noticeable if the portable left and right
speakers (surround) were improperly
placed, or if there is strong surround effect
in the music you play.
Error message is displayed on the display
panel.
• If spatial calibration fails, one of the
following error message is displayed. Refer
to the fourth chapter (Spatial calibration)
for details to re-calibrate.
23EN
• FAIL (fail): indicates that the portable
left/right speaker is not in SOD mode
or out of calibration range, or there is
some obstacle by which the main unit,
the portable left and right speakers
cannot completely “see” each other.
• BATT LOW (battery low): indicates
that the portable left/right speaker has
low battery.
• ERROR (error): indicates that the
portable left and right speakers are not
detached from the main unit.
24 EN
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the
double-D symbol are trademarks of Dolby
Laboratories.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the
Symbol together are registered trademarks, and
DTS Digital Surround is a trademark of DTS,
Inc. © DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Denition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Gibson
Innovations Limited is under license. Other
trademarks and trade names are those of their
respective owners.
The N Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United
States and in other countries.
Specifications are subject to change without notice
6 © Gibson Innovations Limited. All rights reserved.
201
This product has been manufactured by, and is sold under the responsibility of WOOX Innovations
(Shanghai) Commercial Company Ltd., and WOOX Innovations (Shanghai) Commercial Company Ltd., is the
warrantor in relation to this product.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used
under license.
E6_93_UM_V2.0
Loading...