Philips E162 User Manual

Your Phone

TFT LCD
Navigation and
confirm keys
Pick-up key
Right soft key
Hang up and power key
Charger &
Micro USB port
Headphone jack
Philips continuously strives to improve its products. Due to software upgrading, some contents in this user guide may be different from your product. Philips reserves the rights to revise this user guide or withdraw it at any time without prior notice. Please take your product as standard.
1
Home screen
Status Bar
Shortcut
Your phone’s home screen consists of the following areas:

Keys

Learn about the main keys.
Icons Definition Function
( Dial Make or answer a call.
Confirm and
Select or confirm an option.
navigation key
) Hang-up/
Exit/ Power
L
Left soft key Select the options on the screen.
R
Right soft key Select the options on the screen.
S
Lock/unlock Press L and then S to lock/unlock keys.
End a call; Return to home screen;
Hold to turn on/off the phone.
2

Icons & symbols

Learn about the icons and symbols on the screen.
Icons Definition Function
Ringtone Your phone will ring when receiving a call.
Vibration only
Silent Your phone will not ring when receiving a call.
Battery The bars indicate the battery level.
SMS You have a new message.
Headset The headset is plugged into the phone.
Alarm The alarm clock is activated.
GSM network
Flight Mode Flight mode is activated.
Bluetooth Bluetooth is activated.
Your phone will vibrate when receiving a call.
Your phone is connected to a GSM network. The more bars are shown the better the reception is.
3

Getting started

Insert SIM card and Charge the battery

Learn about installing SIM card and charging the battery for the first use.

Insert SIM card

1
Remove the back cover.
3
Insert the SIM card.
5
Replace the back cover.
2
Take out the battery.
4
Install the battery.
4

Charge the battery

Tips:
You can use the phone while it is charging.
Keeping the charger plugged to the mobile phone when the battery is fully charged will not damage the battery. The only way to turn off the charger is to unplug it, so it is advisable to use an easily accessible power socket.
If you do not intend to use your phone for several days, we recommend that you remove the battery.
If a fully charged battery left unused, it will lost its charge over time.
If a battery is being used for the first time or the battery has not been used for a prolonged period, it may take longer time to recharge.
You can expand the memory of your phone by adding a micro SD card. The phone can support Micro SD card up to 16 GB.
1
Push down the card holder and lift it up. Align your micro SD card with the slot. Put it in place.
2
Press down the card holder and pull it until it is locked.
A new battery is partially charged. The battery icon in the upper-right corner shows the battery level of charging status.

Insert a Micro SD card (Memory card)

5

Customize your phone

Note:
Customize your phone to match your preferences.

Set clock

1
On the home screen, go to Menu>Settings> Phone settings >
Time and date.
2
Select Set time/date: use the numeric key to enter the digits.

SIM Settings

1
Check that your phone is turned on. Enter the PIN code if required.
2
Go to Menu>Settings>Dual SIM Settings to activate both cards or one card only.
The PIN code is preconfigured and communicated to you by your network operator or retailer.
If you enter an incorrect PIN code three times in succession, your SIM card will be blocked. To unblock it, you must request the PUK code from your operator.
If you enter an incorrect PUK code ten times in succession, the SIM card will be locked permanently. When this happens, please contact your network operator or retailer.

Using your phone

Use basic call functions

Make a call

1
Enter the phone number.
2
Press ( to dial the number.
3
Press ) to hang up.

Answer and end a call

1
Press (to answer the call.
2
Press R to select handsfree mode.
3
Press)to hang up.
6
Loading...
+ 13 hidden pages