Philips DFR9000 QUICK STARTING GUIDE

DFR9000

Quick Install Guide 1.

Installation

English

DFR9000

Quick Install Guide 1.

Installation

English

CD IN CD-R IN AUX IN

SC ART INPUT

M-CH OUT

CD IN CD-R IN AUX IN

SACD Player

CD IN CD-R IN AUX IN

AUDIO IN AUDIO OUT

AUDIO OUT

DV D Recorder

Game

console

IN AUX IN

HDMI OUT

HDMI IN

HDT V

SACD Player

HDMI

Source Device

OPTIC AL OUT

DIGITAL OUT

OUT

DIGITAL AUDIO

Satellite

Receiver

DV D Player

CD Player

CD Recorder

CD IN CD-R IN AUX IN

DAB

Also see chapter 4.2 of the Instructions for use. Also see chapter 4.5 of the Instructions for use.

Also see chapter 4.3 of the Instructions for use. Also see chapter 4.6 of the Instructions for use.

Also see chapter 4.4 of the Instructions for use. Also see chapter 4.10 of the Instructions for use.

TV Analogue multichannel equipment

Analogue stereo audio equipment Digital HDMI equipment

Digital audio equipment Antennas

CD IN CD-R IN AUX IN

CENTRE

FRON T

LEFT

FRON T

RIGHT

ACTIVE

SU B

WOOFER

SU RRO UN D

RIGHT

SU RRO UN D

LEFT

SU RRO UN D

BACK

LISTEN ING POSIT ION

Speakers: 6.1 setup

Also see chapter 4.5 of the Instructions for use.

CD IN CD-R IN AUX IN

SCA RT 1

SCA RT 1 (T V) SCA RT 1 ( TV)SCA RT 2 ( AUX)

SCA RT 1

DV D Recorder

VCR

CD IN CD-R IN AUX IN

YPb

Progressive SCAN input

Progressive SCAN output

YPbPr

DV D Player

Also see chapter 4.7 of the Instructions for use.

Also see ‘TV Out’ in chapter 10.5 ‘Picture menu’

of the Instructions for Use.

Video equipment

- Scart RGBS

The DIGITAL IN 1 and OPTICAL IN digital input sockets are preassigned as audio inputs for VIDEO 1 IN and VIDEO 2 IN.

In case the connected equipment does not provide digital output, you should reassign other (analogue) audio input sockets for audio connection to this specific device. For this see ‘Reassigning input sockets’ under ‘Preparation and setup’.

Video equipment

- Progressive Scan (Ycb/Cr,YPb/Pr)

DFR9000

Quick Install Guide 2.

Preparation and setup

English

DFR9000

Quick Install Guide 3.

Operation

English

10 cm

5 cm

CD IN CD-R IN AUX IN

STANDBY-ON

SOURCE

OK SYSTEM MEN U

PULL TO OPEN

DFR 9000 DIGI TAL SUR ROUND RECEIVE R

Preparation

Menu navigation

OSD language selection Speaker size and distance

Speaker volume Reassigning input sockets*

• Insert batteries in remote control.

• Place set. • Connect to the mains. • Switch on set.

1 Switch on receiver and TV.

Select A/V input on TV.

2 Use SELECT to select RECVR. 3 Use source selection buttons

to select A/V source.

4 Press SYSTEM MENU to open

system menu.

5 Use 3 and 4 to select

submenus.

6 Confirm with OK.

7 Use 2, 1, 4 and 3 to select

sub menu items and settings.

8 Confirm with OK. 9 Press SYSTEM MENU to close

the system menu.

1 Use 4 to select ‘Config.’.

Confirm with OK.

2 Use 4 to select ‘Language’.

Confirm with OK.

3 Use 2 to select language.

Confirm with OK.

1 Use 4 to select ‘Speakers’.

Confirm with OK.

2 Use 2, 1, 4 and 3 to set

speaker size and distance for all speakers. Confirm with OK.

1 Use 4 to select ‘Balance’.

Confirm with OK.

2 Use 2, 1, 4 and 3 to set

speaker volume for all speakers. Confirm with OK.

1 Use 4 to select ‘A/V input’.

Confirm with OK.

2 Use 4 and 3 to A/Vsource

(e.g. CD Audio). Confirm with OK.

3 Use 1 and 2 to select input

socket for this source (e.g. GAME IN). Confirm with OK.

* Only necessary if you wish to connect a device for which no socket(s)

is/ are preassigned.

Note: For more detailed information on preparation and setup of your DFR9000 see chapters 4 ‘Installation’, 5 ‘System menu and 6 ‘Setting up the receiver’

of the Instructions for Use.

Playback

Use SELECT to select RECVR.

2 Switch on receiver and source. 3 Use source selection buttons

to select source.

4 Start playback on source.

• Use the sound control buttons to adjust the sound.

• Use SURROUND to select surround modes.

Tuning to Storing preset radio stations Tuning to preset radio stations radio stations

(FM, FM-M,MW)

1 Use SELECT to select RECVR. 2 Use TUNER to select tuner. 3 Keep ∞ or § pressed for

about 1 second, then release.

4 Press ∞ or § again to

interrupt searching.

1 Press SYSTEM MENU to open

the system menu.

2 Use 4 to select ‘Tuner’.

Enter with 2.

3 Use 4 to select ‘Autoprogram’.

Enter with 2.

4 Use 3 and 4 to select the

station number from which onwards radio stations will be stored. Confirm with OK.

> Storing preset radio stations

may take several minutes.

• Use 2, 1, 4 or 3 to select preset radio stations.

Storing DAB radio stations Tuning to DAB

radio stations

Press SELECT to select RECVR.

2 Use TUNER to select DAB.

3 Press SYSTEM MENU to open

the system menu. Enter with 2.

4 Use 4 to select ‘Tuner’.

Enter with 2.

5 Use 4 to select ‘Dab scan’. 6 Press OK (7) to select ‘New’.

> Storing DAB radio stations may

take several minutes.

• Press 1 or 2 to select preset DAB radio stations.

Note: For more detailed information on operating your DFR9000 see chapters 7 ‘Operating the amplifier’ and 8 ‘Operating the tuner’

of the Instructions for Use’.

3103 305 2051.1