Philips BDL4211VS User Manual

Philips LCD monitor
42"
WXGA
BDL4211VS
Excellent robust High End Public Display Solution
Wide XGA LCD Monitor
Excellent and robust network-controlled 42" LCD Monitor. This monitor uses Philips leading edge display technology to provide a crystal clear message.
Operational flexibility
• Multiple PC input formats up to WXGA
• Monitor is network controllable for remote management
• VGA loop through to daisy chain other monitors
• Portrait mode operability
Optimised for public viewing
• WXGA, wide format 1366 x 768 resolution for sharper display
• Brightness automatically adjusts with ambient conditions
• DCDi™ eliminates combing and jagged edges for a sharp image
• PiP allows watching a second source simultaneously
Lower total cost of ownership
• No permanent burn-in when static information is displayed
• Intelligent power management for lower consumption
• Hidden control buttons prevent tampering with settings
LCD monitor
BDL4211VS/00
42" WXGA
Specifications Product highlights
Picture/Display
LCD panel type: 1366 x 768 pixels, Anti-glare polarizer
Panel Size: 42" / 106.7cm
Pixel pitch: 0.6810 x 0.6810 mm
Brightness (nits): 600 nit
Contrast ratio (typical): 600:1
Display colours: 16.7 million colours
Viewing angle: @ C/R > 10
Viewing Angle (H / V): 176 / 176 degree
Response time (typical): 12 ms
White Chromaticity, 9300K: x = 0.283 / y = 0.297
White Chromaticity, 6500K: x = 0.313 / y = 0.329
Maximum Resolution: 1366 x 768 @ 60Hz
Recommended Resolution: 1366 x 768 @ 60Hz
Factory Preset Modes: 10 modes
Horisontal Scanning Frequency: 31 - 49 kHz
Refresh rate (V): 60Hz
•sRGB
Picture enhancement: Picture in Picture, Progressive scan
Aspect ratio: 16:9
Supported Display Resolution
Video formats Resolution Refresh rate 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 60Hz 1080i 60Hz
Computer formats Resolution Refresh rate 800 x 600 60Hz 640 x 480 60Hz 1280 x 768 60Hz 1024 x 768 60Hz 1366 x 768 60Hz
Connectivity
PC: VGA-in D-Sub 15HD, DVI-D x1, 3.5 mm PC audio input x1, RS232 D-Sub9
AV input: Composite (CVBS) x1, S-video x1, Component (YPbPr) x1, SCART x1, Audio (L/R) for YPbPr x1, Audio (L/R) x1
Audio output: Speaker Out 2x mini-jack 3.5mm, Stereo Audio (3.5 mm jack) 1x
Convenience
Convenience Enhancements: On-screen Display
Monitor Controls: Le ft / righ t, M enu (OK) , Po wer On/Off, Source Select, Up / down, Brightness control, Contrast control, Video select
OSD Languages: English, French, German, Italian, Spanish, Simplified Chinese
Plug & Play Compatibility: sRGB, Windows 98/ME/ 2000/XP
Regulatory Approvals: CE Mark, FCC-B, UL, CSA
Power
Consumption: 180W
Sleep Mode: <2W
Power LED indicator: Operation - Blue, Stand by/ sleep - Amber
Power supply: Built-in
Dimensions
Dimensions (without base) (W x H x D): 1035
x 626 x 115 mm
Weight: 29 kg
MTBF: 50,000 (excl. CCFL 60,000) hrs
Temperature range (operation): 5°C to 40°C
Temperature range (storage): -20°C to 60°C
Relative Humidity: 20% - 80%
Accessories
Included Accessories: AC Power Cord, Remote control, VGA cable, DVI-D cable, Battery
•User Guide on CD-ROM
Optional accessories: Fixed wall mount, Flexible wall mount, Ceiling mount
Miscellaneous
Warranty: 3-year on site
Bezel: silver
Network controllability: RS232
Network controllability allows user to control and adjust monitors remotely through RS232 protocol.
VGA loop through
In case more than one screen needs to share the same input signal, VGA loop through offers a cost effective solution in which the VGA input signal is amplified and made available on a VGA output connector which can be connected to the next monitor
Fanless operation in landscape
In landscape mode the monitor operates without activating fans. To make the monitor even more flexible in use one can mount this product also in portrait mode. Circomstances in this mode might require additional cooling. A thermal sensor will then activate cooling fans.
Portrait mounting possible
This di spl ay is als o able to be s afely and re liabl y moun ted in portrait position.
WXGA 1366 x 768 resolution
Automatic brightness control
The adjustment of display settings to correspond with ambient light without user intervention.
DCDi de-interlacing
DCDi enhances the quality of all images by eliminating the stair-step jagged edges so often seen on progressive scan displays resulting in natural images with exceptional detail.
Picture In Picture (PIP)
Provides the ability to watch simultaneously two different sources, either two video sources or a combination with data/graphics
No permanent burn-in
Public displays often show static information which could cause ghost images (burn-in). By simply switching off/on the monitor these ghost images disappear fully.
Robust metal bezel
Specially designed for demanding public applications, the metal bezel offers higher durability and protection against vandalism. Anodised paint is used to offer extra protection of the bezel against scratches.
Intelligent power management
Intelligent power management employs energy-efficient technologies in product design to reduce power consumption and significantly lower the total cost of ownership.
Hidden control buttons
Control buttons placed at the rear of a monitor used for public display to prevent tampering with display settings.
Issue date 2007-11-09
Version: 2.0
12 NC: 8639 000 16498 EAN: 87 10895 91415 4
© 2007 Koninklijke Philips Electronics N.V. All Rights reserved.
Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
www.philips.com
Loading...