To obtain a more detailed Electronic
Copy of this Manual or to access live
chat support, go to
www.philips.com/support
ES Manual del Usuario
Para obtener una copia electrónica más
detallada de este Manual de usuario o
para tener acceso al soporte de chat en
vivo, vaya a www.philips.com/support
FR Manuel d’Utilisation
Pour obtenir une copie électronique
plus détaillée de ce guide ou accéder
au soutien par clavardage en direct,
visitez le www.philips.com/support
EN For further assistance, call the customer support service in
your country.
• To obtain assistance, contact Philips Customer Care Center;
In the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands
1 866 202 5960
México D.F. and Área Metropolitana; 58 87 97 36
Interior de la Republica; 01 800 839 19 89
ES Para obtener más información, llame al servicio de
soporte al cliente de su país.
• Para obtener asistencia, comuníquese con Centro de
atención al cliente de Philips;
En los Estados Unidos, en Canadá, Puerto Rico o en las
Islas Vírgenes de los Estados Unidos; 1 866 202 5960
México D.F. y Área Metropolitana; 58 87 97 36
Interior de la Republica; 01 800 839 19 89
FR Pour obtenir de l’aide supplémentaire, communiquez
avec le centre de service à la clientèle de votre pays.
• Pour obtenir de l’aide, communiquez avec le centre de
service à la clientèle Philips au;
Dans le États-Unis, au Canada, à Puerto Rico ou aux Îles
Vierges américaines; 1 866 202 5960
México D.F. et Área Metropolitana; 58 87 97 36
Interior de la Republica; 01 800 839 19 89
www.philips.com/support
Register online today at www.philips.com/welcome today
to get the most benets from your purchase.
Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out.
Register Online at www.philips.com/welcome to ensure:
*Product Safety Notication *Additional Benets
By Registering your Product, you'll receive
notication - directly from the manufacturer - in
the rare case of a Product Recall or Safety Defect.
Registering your Product guarantees that you'll
receive all of the Privileges to which you're
Entitled, including special money-saving oers.
Know these safety symbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The caution marking is located on the rear or bottom of the cabinet.
WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION: Pour éviter les choc électriques,introduire la lame la plus large de la che dans la borne
Apparatus shall not be exposed to dripping or splashing and no objects lled with liquids,
such as vases, shall be placed on the apparatus.
correspondante de la prise et pousser jusqu’au fond.
The lightning ash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the apparatus’s enclosure that may be of sucient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the apparatus.
For fastest support visit us online for chat and self service
solutions at www.philips.com/support
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY CARES
• Manufacturers, retailers and the rest of the consumer
electronics industry are committed to making home
entertainment safe and enjoyable.
• As you enjoy your television, please note that all
televisions – new and old- must be supported on
proper stands or installed according to the
manufacturer’s recommendations. Televisions that are
inappropriately situated on dressers, bookcases,
shelves, desks, speakers, chests, carts, etc., may fall
over, resulting in injury.
TUNE IN TO SAFETY
•ALWAYS follow the manufacturer’s recommendations
for the safe installation of your television.
•ALWAYS read and follow all instructions for proper
use of your television.
•NEVER allow children to climb on or play on the
television or the furniture on which the television is
placed.
•NEVER place the television on furniture that can
easily be used as steps, such as a chest of drawers.
•ALWAYS install the television where it cannot be
pushed, pulled over or knocked down.
•ALWAYS route cords and cables connected to the
television so that they cannot be tripped over, pulled
or grabbed.
WALL OR CEILING MOUNT YOUR TELEVISION
•ALWAYS contact your retailer about professional
installation if you have any doubts about your ability
to safely mount your television.
•ALWAYS use a mount that has been recommended
by the television manufacturer and has a safety
certication by an independent laboratory (such as
UL, CSA, ETL).
•ALWAYS follow all instructions supplied by the
television and mount manufacturers.
•ALWAYS make sure that the wall or ceiling where you
are mounting the television is appropriate. Some
mounts are not designed to be mounted to walls and
ceilings with steel studs or cinder block construction.
If you are unsure, contact a professional installer.
• Televisions can be heavy. A minimum of two people
is required for a wall or ceiling mount installation.
MOVING AN OLDER TELEVISION TO A NEW PLACE
IN YOUR HOME
• Many new television buyers move their older CRT
televisions into a secondary room after the purchase
of a at-panel television. Special care should be
made in the placement of older CRT televisions.
•ALWAYS place your older CRT television on furniture
that is sturdy and appropriate for its size and weight.
•NEVER place your older CRT television on a dresser
where children may be tempted to use the drawers
to climb.
•ALWAYS make sure your older CRT television does
not hang over the edge of your furniture.
2
Important Safety Instructions
BrandModel #Screw dimension
www.philips.com/support
I
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
1 1. Only use attachments / accessories specied by
the manufacturer.
12. Use only with the cart, stand,
tripod, bracket, or table specied
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart / apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
Note to the CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, species that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
Example of Antenna Grounding as per NEC National Electric Code
GROUND CLAMP
ELECTRIC SERVICE EQUIPMENT
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM (NEC ART 250,
PART H)
English
Wall Mount Bracket Kit
65PFL5922
55PFL5922
50PFL5922
43PFL5922 SANUS25BBM4 x 1.378” (35mm)
Your TV meets the VESA standard for wall mounting.
•
Consult with your local dealer for a wall mount bracket
which is compatible with your TV model.
The recommended Wall Mount Bracket Kit (sold
•
separately) allows the mounting of the TV on the wall.
For detailed information on installing the wall mount, refer
•
to the Wall Mount Instruction Book.
P&F USA is not responsible for any damage to the product
•
or injury to yourself or others if you elect to install the TV
Wall Mount Bracket or mount the TV onto the Bracket on
your own.
The Wall Mount Bracket must be installed by experts.
•
SANUSF80bM6 x 1.378” (35mm)
P&F USA is not liable for these types of accidents
or injuries noted below.
Install the Wall Mount Bracket on a sturdy vertical wall.
•
If installed onto a ceiling or slanted wall, the TV and Wall
•
Mount Bracket may fall which could result in a severe injury.
Do not use screws that are longer or shorter than their
•
specified length. If screws too long are used this may cause
mechanical or electrical damage inside the TV set. If screws
too short are used this may cause the TV set to fall.
Do not fasten the screws by excessive force. This may
•
damage the product or cause the product to fall, leading to
an injury.
For safety reasons use 2 people to mount the TV onto a
•
Wall Mounting Bracket.
Do not mount the TV onto the Wall Mounting Bracket while
•
your TV is plugged in or Turned On. It may result in an
electrical shock injury.
When installing the unit on the wall, allow this
much space.
Top
Left and right side:5.9 inches (15cm)
Bottom
3
:
1 1.8 inches (30cm)
:
3.9 inches (10cm)
www.philips.com/support
1 Notice
Trademarks are the property of Koninklijke Philips N.V. or
their respective owners.
P&F USA reserves the right to change products at any time
without being obliged to adjust earlier supplies accordingly.
The material in this manual is believed adequate for the
intended use of the system. If the product or its individual
modules or procedures are used for purposes other than
those specified herein, confirmation of their validity and
suitability must be obtained. P&F USA warrants that the
material itself does not infringe any United States patents. No
further warranty is expressed or implied.
P&F USA cannot be held responsible neither for any errors
in the content of this document nor for any problems as a
result of the content in this document. Errors reported to P&F
USA will be adapted and published on the P&F USA support
website as soon as possible.
Pixel characteristics
This LCD product has a high number of color pixels. Although
it has effective pixels of 99.999% or more, black dots or bright
points of light (red, green or blue) may appear constantly on
the screen. This is a structural property of the display (within
common industry standards) and is not a malfunction.
Warranty
No components are user serviceable. Do not open or remove
covers to the inside of the product. Repairs may only be done
by Service Centers and official repair shops. Failure to do so
shall void any warranty, stated or implied.
Any operation expressly prohibited in this manual, any
adjustments or assembly procedures not recommended or
authorized in this manual shall void the warranty.
Federal Communications Commission Notice
This equipment has been tested and found to comply with
the limits for a Class B Digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that
•
to which the receiver is connected.
Consult the dealer or an experienced radio or television technician
•
for help.
Declaration of Conformity
Trade Name
Responsible Party:P&F USA, Inc.
Model
Address
Telephone Number:1 866 202 5960
:
PHILIPS
:
65PFL5922, 55PFL5922, 50PFL5922,
43PFL5922
:
PO Box 2248, Alpharetta, GA
30023-2248 U.S.A.
Modifications
This apparatus may generate or use radio frequency energy.
Changes or Modifications to this apparatus may cause
harmful interference.
Any Modifications to the apparatus must be Approved by
P&F USA.
The user could lose the authority to operate this apparatus
if an unauthorized Change or Modification is made.
Cables
Connections to this device must be made with shielded
cables with metallic RFI / EMI connector hoods to maintain
compliance with FCC Rules and Regulations.
Canadian notice
CAN ICES-3 (B)/NMB-3 (B)
Analog and Digital Television Receiving Apparatus,
Canada BETS-7 / NTMR-7.
The following FCC/IC RSS applies to the
Wireless LAN adapter included in this product.
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Country Code Statement
For product available in the USA market, only channel 1a1 1
can be operated. Selection of other channels is not possible.
To maintain compliance with FCC RF exposure requirements,
use only belt-clips, holsters or similar accessories that do not
contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not
comply with FCC RF exposure requirements and should be
avoided.
This device complies with Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference and (2)
this device must accept any interference, including interference
that may cause undesired operation of the device.
5150-5250 MHz band is restricted to indoor operations only.
High-power radars are allocated as primary users (i.e.
priority users) of the bands 5250-5350 MHz and
5650-5850 MHz and that these radars could cause
interference and/or damage to LE-LAN devices.
Compliance with IC requirement RSS-210
A9.4.4
Data transmission is always initiated by software, which is
the passed down through the MAC, through the digital and
analog baseband, and finally to the RF chip. Several special
packets are initiated by the MAC. These are the only ways
the digital baseband portion will turn on the RF transmitter,
which it then turns off at the end of the packet. Therefore,
the transmitter will be on only while one of the
aforementioned packets is being transmitted. In other
words, this device automatically discontinue transmission
in case of either absence of information to transmit or
operational failure.
4
www.philips.com/support
Positioning the TV
Large screen TVs are heavy. 2 people are required to carry and
•
handle a large screen TV.
Make sure to hold the upper and bottom
•
frames of the Unit firmly as illustrated.
Install the Unit in a horizontal and stable
•
position.
Do not install the Unit in direct sunlight or in
•
a place subject to dust or strong vibration.
Depending on the environment, the
•
temperature of this Unit may increase
slightly. This is not a malfunction.
When installing this unit in a temperate environment, avoid a place
•
with rapid temperature changes.
This unit should not be used in a tropical environment as it has not
•
been evaluated under such conditions.
No objects should be placed directly on or under this unit, especially
•
lighted candles or other flaming objects.
Depending on your external devices, noise or disturbance of the
•
picture and / or sound may be generated if the Unit is placed too
close to them. In this case, please ensure enough space between
the external devices and the Unit.
Do not insert the AC power cord into the power socket outlet before
•
all the connections are made.
Ensure that you always have easy access to the AC Power Cord and
•
Outlet to disconnect the TV from the AC Outlet.
Before you move the TV, disconnect attached Cables to prevent
•
damage to Connectors, especially the TV Tuner.
Be sure to Unplug the AC Power Plug from the AC outlet before
•
moving or carrying the Unit.
When moving the TV and then Setting it down, please be careful not
•
to pinch the AC Power Cord under the Unit.
Regulatory Notices
WARNING:To prevent injury, this apparatus must be securely
WARNING:Never place a TV in an unstable location. A TV may fall,
If your existing TV is being retained and relocated, the same
considerations as above should be applied.
Do not place the Unit on the furniture that is capable of being
tilted by a child and an adult leaning, pulling, standing or
climbing on it. A falling Unit can cause serious injury or even
death.
In order to avoid interruption of ventilation, this unit should
not be placed in built-in equipment such as a book cabinet,
rack, etc., and the vents of this unit should not be covered
with anything such as a tablecloth, curtain, newspaper, etc.
Make sure that there is enough ventilation space (4 inches /
10 cm or more) around this unit.
attached to the furniture / wall in accordance with the
instructions. Tipping, shaking or rocking the unit may
cause injury / death.
causing serious personal injury or death. Many injuries,
particularly to children, can be avoided by taking simple
precautions such as:
–
Using cabinets or stands recommended by the
manufacturer of the TV.
–
Only using furniture that can safely support the TV.
–
Ensuring the TV is not overhanging the edge of the
supporting furniture.
–
Not placing the TV on tall furniture (for example,
cupboards or bookcases) without anchoring both the
furniture and the TV to a suitable support.
–
Not placing the TV on cloth or other materials that
may be located between the TV and supporting
furniture.
–
Educating the children about the dangers of climbing
on furniture to reach the TV or its controls.
Press to turn the Unit On and go into Standby mode. To
completely turn Off the Unit, you must unplug the AC power
Plug from the AC Power Outlet.
Disconnect the AC Power Plug to shut the Unit Off when
trouble is found or not in use. The AC Plug shall remain readily
available.
AC Power Plug
Never use a gas duster on this TV.
The gas trapped inside of this Unit may cause ignition and
explosion.
Environmental Care
The packaging of this product is intended to be recycled.
Contact your local authorities for information about how to
recycle the packaging.
For product recycling information, please visit -
www.recycle.philips.com
English
End of Life Directives
Philips pays a lot of attention to produce environmentalfriendly products in green focal areas. Your new TV contains
materials which can be recycled and reused. At the end of
its life, specialized companies can dismantle the discarded
TV to concentrate the reusable materials and to minimize the
amount of materials to be disposed of. Please ensure you
dispose of your old TV according to local regulations.
Batteries usage
CAUTION:Danger of explosion if battery is incorrectly replaced.
WARNING:Batteries (battery pack or battery installed) should not
Do not mix old and new batteries.
•
Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad,
•
ni-mh, Li-ion, etc.) batteries.
Replace only with the same or equivalent type.
be exposed to excessive heat such as sunshine, fire or
the like.
Disposal of Used Batteries
The batteries supplied do not contain the heavy metals
mercury and cadmium, however in certain localities,
disposing batteries with household waste is not permitted.
Please ensure you dispose of batteries according to local
regulations.
5
www.philips.com/support
Downloading an Electronic Copy
To obtain a more detailed electronic copy of this manual:
Point your browser to : www.philips.com/support
1
Choose your country of location with language.
2
Enter the product name or number in the search field.
3
Alternatively, you can browse the catalog.
Click the Description or Model.
4
Under Product support, click “User manual”.
5
Preparing to Move/Ship the Unit
Please pack the Unit properly by following the Diagram on
the Carton (as noted below).
To avoid damage to the Screen, do not pack the Stand on the same
•
side as the TV screen, refer to the illustration above.
Copyright
All other registered and unregistered trademarks are the
property of their respective owners.
The terms HDMI and HDMI HighDefinition Multimedia Interface,
and the HDMI Logo are
trademarks or registered
trademarks of HDMI Licensing
LLC in the United States and
other countries.
The American Academy of Pediatrics discourages
television viewing for children younger than two years of
age.
Some features may require an always-on broadband
internet connection, firmware update and/or a minimum
bandwidth. Internet services vary by location.
P&F USA Inc./P&F MEXICANA, S.A.de C.V. do not warrant
access to the Portal or to any of the services, content,
software and advertising. P&F USA Inc./P&F MEXICANA,
S.A. de C.V. may, in its sole discretion, add or remove access
to any specific services, content, software and advertising
at any time. Although P&F USA Inc./P&F MEXICANA, S.A.
de C.V. will strive to provide a good selection of services,
content or software, P&F USA Inc./P&F MEXICANA, S.A. de
C.V. do not warrant continued access to any specific
services, and content or software.
Dolby, Dolby Audio, and the
double-D symbol are
trademarks of Dolby
Laboratories.
Sonic Emotion and the Sonic
Emotion logo symbol are
registered trademarks of sonic
emotion ag.
6
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.