Philips 47PFL3704D User Manual

www.philips.com/welcome

52PFL5704D 47PFL5704D 42PFL5704D 52PFL3704D 47PFL3704D

EN User manual FR Manuel d’utilisation ES Manual del usuario

EN: For further assistance, call the customer support service in your country.

• To obtain assistance in the U.S.A., Puerto Rico, or the U.S. Virgin Islands, contact Philips

Customer Care Center at 1-866-771-4018

• To obtain assistance in Canada, contact Philips Customer Care Center at:

• 1-800-661-6162 (French speaking)

• 1-866-771-4018 (English speaking)

• To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 504 6200

Enter below the model and serial numbers located on the back and right side of the TV cabinet. FR: Pour obtenir de l’aide supplémentaire, comm uniquez avec le centre de service à la clientèle de

votre pays.

• Pour obtenir de l’aide aux États-Unis, à Puerto Rico ou aux Îles Vierges américaines,

communiquez avec le centre de service à la clientèle Philips au : 1-866-771-4018

• Pour obtenir de l’aide au Canada, communiquez avec le centre de service à la clientèle Philips

au :

• 1-800-661-6162 (pour un service en français)

• 1-866-771 4018 (pour un service en anglais)

• Pour obtenir l’aide au Mexique, entrez en contact avec le centre de soin de client de Philips à

01 800 504 6200

Entrer ci dessous le modèle et le numéro de série situés dérrière à droite sur le dos du téléviseur. ES: Para obtener más información, llame al servicio de soporte al cliente de su país.

• Para obtener asistencia en los Estados Unidos, Puerto Rico o en las Islas Vírgenes de los

Estados Unidos, comuníquese con Centro de atención al cliente de Philips al 1-866-771-4018

• Para obtener asistencia en Canadá, comuníquese con Philips Customer Care Center al:

• 1-800-661-6162 (en francés)

• 1-866-771-4018 (en inglés)

• Solo para Mexico CENTRO DE ATENCIÓN A CLIENTES LADA. 01 800 504 6200 Solo

Para México.

Escriba a continuación el modelo y número de serie que estan localizados en lado derecho y parte posterior de el gabinete de el televisor.

Model / Modèle / Modelo : Serial / Série / Serie:

Contents

Label your connections 27 Connect your devices 28

1 Notice 4

2 Important 5

Product information 5 Screen care 5 Environmental care 5

3 Your TV 6

Side controls and indicators 6 Understand the remote control 6

4 Get started 8

Position the TV 8 Insert the remote control batteries 8 Connect the antenna or cable 8 Connect the power cord 9 Manage cables 9 Switch on and set up the TV 10

5 Use your TV 11

Switch your TV on/off or to standby 11 Switch channels 11 Adjust volume 11 Watch channels from a set-top box 12 Watch connected devices 12 Watch a DVD 12

10 Troubleshooting 31

11 Notes for the use of USB devices 32

12 Product information 33

13 Warranty 34

14 Index 35

English

6 Use more of your TV 13

Use the quick access menu 13 Change picture and sound settings 13 Use Auto Mode 15 Create and use lists of favorite channels 15 Set the clock 15 Use child control and rating locks 16 View closed captions (subtitles) 19 View photos and play music on a USB device 20 Use your TV in HD mode 21 Use your TV as a PC monitor 22 Use Philips EasyLink 22 Use the demo mode 22

7 Install channels 23

Select your menu language 23 Set your location to home 23 Automatically install channels 23 Optimize the signal quality from your antenna 23 Uninstall and reinstall channels 24 Return your settings to default values 24 Show emergency alerts (EAS) 24

8 Update your TV software 25

Check your current software version 25 Prepare for the software upgrade 25 Upgrade software 25

9 Connect devices 26

Connection overview 26 Select your connection quality 27

Return your Product Registration Card or register online at

www.philips.com/welcome today to get the very most from your purchase.

Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once, or register online at www.philips.com/welcome to ensure:

*Proof of Purchase

Returning the enclosed card guarantees that your date of purchase will be on file, so no additional paperwork will be required from you to obtain warranty service.

*Product Safety Notification

By registering your product, you'll receive notification - directly from the manufacturer - in the rare case of a product recall or safety defect.

Congratulations on your purchase, and welcome to the “family!”

Dear PHILIPS product owner:

Thank you for your confidence in PHILIPS.You’ve selected one of the best-built, best-backed products available today. We’ll do everything in our power to keep you happy with your purchase for many years to come.

As a member of the PHILIPS “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry.What’s more, your purchase guarantees you’ll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network.

Most importantly, you can count on our uncompromising commitment to your total satisfaction.

All of this is our way of saying welcome - and thanks for investing in a PHILIPS product.

*Additional Benefits

Registering your product guarantees that you'll receive all of the privileges to which you're entitled, including special money-saving offers.

Know these

safety

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This “bolt of lightning” indicates unin-

sulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.

The “exclamation point” calls atten-

tion to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.

WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION: Pour éviter les choc électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.

symbols

RISK OF ELECTRIC SHOCK

DO NOT OPEN

P.S. To get the most from your PHILIPS purchase, be sure to complete and return your Product Registration Card at once, or register online at:

www.philips.com/welcome

Enter below the model and serial numbers located on the back and right side of the TV cabinet. Retain this information for future reference.

Model No.__________________________ Serial No. ________________________

For Customer Use

Visit our World Wide Web Site at http://www.philips.com/welcome

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and third grounding prong. The wide blade or third prong are provided for your safety. When the provided plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. This product may contain lead or mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance:www.eiae.org.

16. Damage Requiring Service - The appliance should be serviced by qualiﬁed service personnel when:

A. The power supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the appliance; or

English

C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a

marked change in performance; or E. The appliance has been dropped, or the enclosure damaged.

17. Tilt/Stability - All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design.

• Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet which could ultimately overturn the product.

• Also,do not endanger yourself, or children, by placing electronic equipment/toys on the top of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product damage and/or personal injury.

18. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

19. Power Lines - An outdoor antenna should be located away from power lines.

20. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mats and supporting structure grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. See Figure below.

21. Objects and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. a) Warning: To reduce the risk of ﬁre or electric shock, this apparatus should not be exposed to rain or moisture and objects ﬁlled with liquids, such as vases should not be placed on this apparatus.

22. Battery Usage CAUTION - To prevent battery leakage that may result in bodily injury, property damage, or damage to the unit:

• Install all batteries correctly, with + and - alignment as marked on the unit.

• Do not mix batteries (old and new or carbon and alkaline, etc.)

• Remove batteries when the unit is not used for a long time.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE (NEC)

GROUND CLAMP

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT

NEC SECTION

(

810-20)

GROUNDING CONDUCTORS

NEC SECTION

(

810-21)

GROUND CLAMPS

ELECTRIC SERVICE EQUIPMENT

POWER SERVICE GROUNDING ELECTRODE SYSTEM

NEC ART

250,

PART H

(

)

Note to the CATV system installer: this reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, speciﬁes that the cable ground shall be connected to the

rounding system of the building, as close to the point of cable entry as practical.

1 Notice

the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.

The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are used for purposes other than those speciﬁ ed herein, conﬁ rmation of their validity and suitability must be obtained. Philips warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied.

Philips cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document. Errors reported to Philips will be adapted and published on the Philips support website as soon as possible.

Declaration of Conformity

Trade Name: PHILIPS Responsible Party: P&F USA Inc. Model: 52PFL5704D, 47PFL5704D, 42PFL5704D,

52PFL3704D, 47PFL3704D

Address: PO Box 672768 Marietta, GA 30006 U.S.A. Telephone Number: 866-771-4018

Modiﬁ cations

The FCC requires the user to be notiﬁ ed that any changes or modiﬁ cations made to this device that are not expressly approved by Philips Consumer Electronics may void the user’s authority to operate the equipment.

Cables

Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations.

Pixel characteristics

This LCD product has a high number of color pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction.

Warranty

No components are user serviceable. Do not open or remove covers to the inside of the product. Repairs may only be done by Philips Service Centers and ofﬁ cial repair shops. Failure to do so shall void any warranty, stated or implied.

Any operation expressly prohibited in this manual, any adjustments, or assembly procedures not recommended or authorized in this manual shall void the warranty.

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio or television technician for help.

Canadian notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

All other registered and unregistered trademarks are the property of their respective owners.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

VESA, FDMI and the VESA Mounting Compliant logo are trademarks of the Video Electronics Standards Association.

® Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world.

freetype.org).

2 Important

Environmental care

Registering your model with Philips makes you eligible for all of the valuable beneﬁ ts listed below, so don’t miss out.

Complete and return your Product Registration Card at once, or register online at www.philips.com/welcome to ensure:

• Proof of Purchase Returning the enclosed card guarantees that your date of purchase is on ﬁ le, so no additional paperwork is required from you to obtain warranty service.

• Product Safety Notiﬁ cation By registering your product you receive notiﬁ cation - directly from the manufacturer - in the rare case of a product recall or safety defect.

• Additional Beneﬁ ts of Product Ownership

Registering your product guarantees that you receive all of the privileges to which you’re entitled, including special money-saving offers.

For further assistance

For further assistance, call the customer support service in your country.

• To obtain assistance in the U.S.A., Puerto Rico, or the U.S. Virgin Islands, contact Philips Customer Care Center at 1-866-771-4018

• To obtain assistance in Canada, contact Philips Customer Care Center at:

• 1-800-661-6162 (French speaking)

• 1-866-771-4018 (English speaking)

Product information

This TV consumes minimal energy in standby mode to minimize environmental impact. The active power consumption is given on the type plate at the back of the TV. The model and serial numbers of your TV can be found on the back and right side of the TV as well as on the packaging.

English

The packaging of this product is intended to be recycled. Contact your local authorities for information about how to recycle the packaging.

End of life directives

Like all LCD products, this set contains a lamp with mercury; please dispose of according to all local, state and federal laws.

Philips pays a lot of attention to produce environment-friendly products in green focal areas. Your new TV contains materials which can be recycled and reused. At the end of its life, specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of. Please ensure you dispose of your old TV according to local regulations.

Disposal of used batteries

The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless, in many areas batteries may not be disposed of with your household waste. Please ensure you dispose of batteries according to local regulations.

Screen care

• Avoid stationary images as much as possible. Stationary images are images that remain on-screen for extended periods of time. Examples include: on-screen menus, black bars and time displays. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage.

• Unplug the TV before cleaning.

• Clean the TV screen and frame with a soft, damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV screen.

• Risk of damage to the TV screen! Never touch, push, rub or strike the screen with any object.

• To avoid deformations and color fading, wipe off water drops as soon as possible.

Regulatory notices

Warning

To reduce the risk of ﬁ re or electric shock, this B apparatus should not be exposed to rain or moisture. Objects ﬁ lled with liquids, such as vases, should not be placed on this apparatus.

Caution

To prevent electric shock, match the wide blade of the plug to the wide slot, fully inserted.

3 Your TV

Congratulations on your purchase, and welcome to Philips! To fully beneﬁ t from the support that Philips offers, register your product at www.philips.com/welcome.

Side controls and indicators

Remote control

u t

a b c

VOLUME

CHANNEL

POWER

a Standby indicator / remote control sensor b POWER : Switches the TV on or off. The TV is not powered off

completely unless it is physically unplugged.

c CHANNEL +/ - : Switches to the next or previous channel. d MENU: Toggles the main menu on or off. e VOLUME +/- : Increases or decreases volume.

a ( Standby-On )

Switches the TV on or off. The TV is not powered off completely unless it is physically unplugged.

b SOURCE

Selects connected devices.

c FAV

Displays a list of all channels marked as favorite. (Includes subchannels.)

d FORMAT

Selects a picture format (see ‘Change picture format’ on page 14).

e Color buttons

Selects tasks or options.

f OPTION

Activates the quick access menu (see ‘Use the quick access menu’ on page 13).

g OK

Activates a selection or accesses the menu.

( Navigation buttons )

Navigates through the menus.

i INFO

Displays information about the TV channel or accessory device. The quality and accuracy of the information depends on the broadcaster. You might see a difference in broadcast time if the broadcast is from a different time zone.

j CH +/-

Switches to the next or previous channel.

k MUTE

Mutes or unmutes audio.

l Number buttons

Select a channel, page or setting.

m . (Dot)

Press the dot (.) for digital channels.

n PREV CH

Returns to the previously viewed channel.

o VOL +/-

Increases or decreases volume.

p MENU/EXIT

Turns the menu on or off.

q BACK

Returns to a previous screen.

r AUTO MODE

Cycles through the preset picture and sound settings (see ‘Use Auto Mode’ on page 15).

s DEMO

Toggles the demo menu on or off .

t SLEEP

Sets a delay after which the TV switches to standby .

u ACTIVE CONTROL

The TV continuously measures and corrects incoming signals to provide the best picture quality.

English

4 Get started

This section supplements information in the Quick Start. For information about how to mount and install your TV, refer to the Quick Start.

Position the TV

Warning

• Do not insert the power plug into the wall socket before all the connections are made.

• Large screen TVs are heavy. Two people are required to carry and handle a large screen

TV.

• Before you move the TV, disconnect the cables to prevent breakage.

Insert the remote control batteries

1 Slide the battery cover off the back of the remote control. 2 Insert the 2 supplied batteries (AAA). Be sure the + and - ends of

the batteries line up with the markings inside the case.

3 Slide the cover back into position.

In addition to reading and understanding the safety instructions , consider the following before positioning your TV:

• Ensure that you always have easy access to the power cord or plug to disconnect the TV from the power.

• If the TV is mounted on a swivel base, ensure that no strain is placed on the power cord when the TV is swiveled. Strain on the power cord can loosen connections.

• The ideal viewing distance for watching TV is three times its screen size.

• Position the TV where light does not fall on the screen.

• Connect your devices before you position the TV.

Use a Kensington lock

There is a Kensington security slot on the back of the TV. Prevent theft by looping a Kensington lock between the slot and a permanent object, such as a heavy table.

Note

• Remove the batteries if not using the remote control for an extended period of time.

Connect the antenna or cable

Cable

TV ANTENNA

Connect to an antenna

Any DTV programs that are broadcast in your area can be received for free through an antenna connection.

Contact your local content provider or your local electronics retailer if you are unsure about what HDTV programs are available in your area.

Broadcasters are transitioning from analog to digital TV. This means that a given broadcaster can have channels available either in analog or in digital, or both analog and digital at the same time.

The TV produces stereo sound only if a stereo signal is broadcast.

Connect to a cable

When your TV is connected to the cable socket, you might receive free digital and high deﬁ nition programs (depending on your cable provider). The channel number for digital and high deﬁ nition channels includes a dot “.” For example, 11.1, 46.30, 108.201. Contact your cable provider for more information.

Connect to a Direct Broadcast Satellite (DBS)

There are two main DBS systems: DirecTV and DishNetwork. These systems require a separate, proprietary set-top box to decode signals

and send them to the TV. The set-top box contains a digital TV tuner for

SPDIF

VIDEO

IO IN

HDM3HDM

HDM

. U

AV2

P L

VIDEO S

AV3

TVANTENNA

HDMI3

receiving off-air digital broadcasts. Contact your local DBS provider for more information about the

connections and the TV channels.

Connect to a set-top box

A cable box or satellite set-top box can be connected to the TV through the following connections:

• ANT

• A/V (Composite Video and Audio)

• S-Video

• YPbPr (Component Video Input)

• HDMI

For information about how to connect a set-top box, see the Quick Start provided.

3 Connect the power cord plug to the power outlet. Ensure that the

cord is tightly secured at both ends.

English

Connect a set-top box through RF IN/OUT

If the TV is connected to a cable box or satellite set-top box via a coaxial connection, set the TV to channel 3 or 4, or to the channel speciﬁ ed by the service provider.

TV ANTENNA

S-VIDEO

Connect a set-top box through component video input or HDMI

SERV. U

LRL

SPDIF OUT

VIDEO

S-VIDEO

DVIAU DIO

AV3AV1 AV2

HDMI3HDMI1 HDMI2

TV ANTENNA

SERV. U

SPDIF

OUT

VIDEO

-VIDE

S-VIDEO

DVIAUDIO

AV2

AV3

AV1

HDMI1 HDMI2 HDMI 3

Disconnect the TV from the power outlet

Caution

• Pull the power cord by the plug; do not pull on the power cord.

1 Unplug the power cord from the power outlet. 2 Unplug the power cord from the power connector at the back of

the TV .

Manage cables

Route your power cord, antenna cable and all other cables through the cable holder at the back of the TV. The holder helps keep your cables tidy and easily manageable.

Connect the power cord

Warning

•

Verify that your power voltage corresponds with the voltage printed at the back of the TV. Do not insert the power cord if the voltage is different.

1 Locate the power connector at the back of the TV.

The location of the power connector varies according to TV model.

2 Insert the power cord fully into the power connector.

Switch on and set up the TV

The TV turns on automatically after the power cord is inserted into the power connector. The following screen appears:

Thank you for your purchase of this PHILIPS TV.

Please proceed with the following steps to set up your TV. For the BESTpossible picture performance, contact your local Cable / Satellite signal provider for High Definition signal options available in your area.

Press the GREEN button on your remote control to proceed.

Follow the on-screen instructions to select your language and complete your TV setup.

Note

• If you connect your TV to a cable box or satellite set-top box, you do not need to install

channels. Press the red button on the remote control to exit this stage of the setup.

Finish the setup by selecting your location:

• If you choose [Retail store] your settings are erased each time you turn off the TV. Use this mode for retail store displays only.

• If you choose [Home] you are guided through a choice of picture display options. Press the left or right cursor buttons to select your preferred screen.

+ 27 hidden pages