Philips 26PF9320 User Manual

LCD TV
CANAL ................FREQ (MHz)
E2 ........................48.25
E3 ........................55.25
E4 ........................62.25
E5 ......................175.25
E6 ......................182.25
E7 ......................189.25
E8 ......................196.25
E9 ......................203.25
E10 ....................210.25
E11 ....................217.25
E12 ....................224.25
R1 ........................49.75
R2 ........................59.25
R3 ........................77.25
R4 ........................85.25
R5 ........................93.25
R6 ......................175.25
R7 ......................183.25
R8 ......................191.25
R9 ......................199.25
R10 ....................207.25
R11 ....................215.25
R12 ....................223.25
S1 ......................105.25
S2 ......................112.25
S3 ......................119.25
S4 ......................126.25
S5 ......................133.25
S6 ......................140.25
S7 ......................147.25
S8 ......................154.25
S9 ......................161.25
S10 ....................168.25
S11 ....................231.25
S12 ....................238.25
S13 ....................245.25
S14 ....................252.25
CANAL ................FREQ (MHz)
S15 ....................259.25
S16 ....................266.25
S17 ....................273.25
S18 ....................280.25
S19 ....................287.25
S20 ....................294.25
H1 ......................303.25
H2 ......................311.25
H3 ......................319.25
H4 ......................327.25
H5 ......................335.25
H6 ......................343.25
H7 ......................351.25
H8 ......................359.25
H9 ......................367.25
H10 ....................375.25
H11 ....................383.25
H12 ....................391.25
H13 ....................399.25
H14 ....................407.25
H15 ....................415.25
H16 ....................423.25
H17 ....................431.25
H18 ....................439.25
H19 ....................447.25
21.......................471.25
22.......................479.25
23.......................487.25
24.......................495.25
25.......................503.25
26.......................511.25
27.......................519.25
28.......................527.25
29.......................535.25
30.......................543.25
31.......................551.25
32.......................559.25
CANAL ................FREQ (MHz)
33.......................567.25
34.......................575.25
35.......................583.25
36.......................591.25
37.......................599.25
38.......................607.25
39.......................615.25
40.......................623.25
41.......................631.25
42.......................639.25
43.......................647.25
44.......................655.25
45.......................663.25
46.......................671.25
47.......................679.25
48.......................687.25
49.......................695.25
50.......................703.25
51.......................711.25
52.......................719.25
53.......................727.25
54.......................735.25
55.......................743.25
56.......................751.25
57.......................759.25
58.......................767.25
59.......................775.25
60.......................783.25
61.......................791.25
62.......................799.25
63.......................807.25
64.......................815.25
65.......................823.25
66.......................831.25
67.......................839.25
68.......................839.25
69.......................855.2
ITALY
CANALE..............FREQ (MHz)
A ..........................53.75
B ..........................62.25
C ..........................82.25
D ........................175.25
E ........................183.75
F.........................192.25
G ........................201.25
H ........................210.25
H1 ......................217.25
FRANCE
CANAL ................FREQ (MHz)
2...........................55.75
3...........................60.50
4...........................63.75
5...........................176.0
6...........................184.0
7...........................192.0
8...........................200.0
9...........................208.0
10.........................216.0
B ........................116.75
C ........................128.75
D ........................140.75
E ........................159.75
F.........................164.75
G ........................176.75
H ........................188.75
I..........................200.75
J .........................212.75
K ........................224.75
L.........................236.75
M........................248.75
N ........................260.75
O ........................272.75
P ........................284.75
Q ........................296.75
Ta b le of TV frequencies. Frequenztabelle der Fernsehsender. Liste des fréquences TV. Frequentietabel TV-Zenders. Tabella delle frequenze TV. Lista de frecuencias TV.
Lista das frequências TV Liste over TV senderne. Tabell over TV-frekvenser. Tabell över TV-frekvenser. TV-taajuustaulukko.
KK··ÙÙ¿¿ÏÏÔÔÁÁÔÔ˜˜ ÛÛ˘˘¯¯ÓÓÔÔÙÙÙÙˆˆÓÓ ÔÔÌÌÒÒÓÓ..
CФЛТУН ˜‡ТЪУЪ ФВВ‰‡Ъ˜ЛНУ‚.
A televizió-adóállomások frekvenciáinak a listája. Lista częstotliwości stacji nadawczych. Seznam frekvenčních pásem vysílačů.
Zoznam frekvenčných pásiem vysielačov.
EUROPE
Positioning the TV
For the best results, choose a position where light does not fall directly on the screen,and at some distance away from radiators or other sources of heat. Leave a space of at least 5 cm all around the TV for ventilation, making sure that curtains, cupboards etc. cannot obstruct the air flow through the ventilation apertures.The TV is intended for use in a domestic environment only and should never be operated or stored in excessively hot or humid atmospheres.
General Points
Please take note of the section entitled 'Tips' at the end of this booklet.
Interference
The Department of Trade and Industry operates a Radio Interference Investigation Service to help TV licence holders improve reception of BBC and IBA programmes where they are being spoilt by interference. If your dealer cannot help,ask at a main Post Office for the booklet "How to Improve Television and Radio Reception".
Mains connection
Before connecting the TV to the mains, check that the mains supply voltage corresponds to the voltage printed on the type plate on the rear panel of the TV. If the mains voltage is different,consult your dealer.
Important
This apparatus is fitted with an approved moulded 13AMP plug. Should it become necessary to replace the mains fuse, this must be replaced with a fuse of the same value as indicated on the plug.
1. Remove fuse cover and fuse.
2.The replacement fuse must comply with BS 1362 and have the ASTA approval mark.If the fuse is lost, make contact with your retailer in order to verify the correct type.
3. Refit the fuse cover.
In order to maintain conformity to the EMC directive, the mains plug on this product must not be removed.
Connecting the aerial
The aerial should be connected to the socket marked : at the back of the set.An inferior aerial is likely to result in a poor, perhaps unstable picture with ghost images and lack of contrast. Make-shift loft or set-top aerials are often inadequate.Your dealer will know from experience the most suitable type for your locality. Should you wish to use the set in conjunction with other equipment, which connects to the aerial socket such as TV games, or a video camera it is recommended that these be connected via a combiner unit to avoid repeated connection and disconnection of the aerial plug.
Fitting the stand (if provided)
Use only the stand provided with the set,making sure that the fixings are properly tightened.A diagram showing how to assemble the stand is packed with the stand. Never use a make-shift stand, or legs fixed with woodscrews.
Information for users in the UK (not applicable outside the UK)
x 1
x 1
P
O T
x 1
!
LIFT HERE
SOULEVER ICI
TO
OPEN
2
TOP
Y
A
INSERT THIS W
1
3
FM ANT.
FM ANT
:
1
Introduction
Ta b le of Contents
Thank you for purchasing this television set. This handbook has been designed to help you install and operate your TV set. We strongly recommend that you read it thoroughly.
Installation
Presentation of the LCD Television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Remote control keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Installing your television set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Quick installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Program sort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Manual store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Other settings in the Install menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Operation
Picture settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Sound adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Feature settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Screen Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Using the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Using in PC monitor mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Using in HD mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Peripherals
Video recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Other equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
To select connected equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Side connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
HD equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Practical information
Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
FR
NL
DE
IT
DK
NO
SU
SF
RU
ES
PT
GR
TR
HU
PL
CZ
SK
GB
Recycling
Disposal of your old product.
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste.The correct disposal of your old product will help prevent potential negative consequences for the environment and human health.
The packaging of this set can be recovered or recycled.Apply to the local authorities in order to minimise environmental waste.
°
2
Presentation of the LCD Television
Remote control
&
Television keys:
.: to switch the TV on or off.
• VOLUME - + : to adjust sound level.
• PROGRAM - + :to select programmes.
• To access or close menus, simultaneously press the VOLUME - and VOLUME + keys. The PROGRAM - + keys can be used to select an adjustment and the VOLUME - + keys to make that adjustment.
é
Adjustable stand.
The stand can be tilted backward/forward and also swivel sideways.The stand can be removed and replaced with a wall mounting kit available as an option (ask your dealer).
Rear of set :
The main connections are made at the bottom of the television.
For more details on connections see page 11.
TV and radio aerial socketsEXT1 and EXT2 socket ( Audio output for connecting an amplifier.
§ VGA, DVI-D and audio input for connecting a
computer.
è Side connections
Pull out the plastic insulation sheet from the battery to activate the remote control. The battery supplied with the appliance does not contain mercury or nickel cadmium so as to protect the environment. Please do not discard your used batteries, but use the recycling methods available (ask your dealer).
&
+-
PROGRAM
-
+
VOLUME
é
è
VGAInDVI-DInAudio
:
EXT 1 EXT 2FM ANT
Audio
Out
"'(§
CR 2025
In
3
Remote control keys
Sound mode
Used to force programmes in
Stereo and Nicam Stereo to Mono
or, for bilingual programmes,to
choose between Dual I or Dual II.
The Mono indication is red when in
forced position.
Select peripherals (p.11)
Press several times to select the
required EXT connector.
Screen Format (p.7)
PIP (Picture in Picture)
on/off (p. 9)
PC / TV / Radio/HD
Press one of these keys to switch the television between PC,TV, radio or HD mode (p. 9).
Cursor
These 4 keys are used to move
around the menus
(<>≤≥)
.
Active control
Optimizes the picture quality depending
on the quality of the incoming signal
and the ambient light conditions.
Mute
To mute or restore the sound.
Volume
To adjust the sound level.
Smart picture and sound
Used to access a series of predefined
picture and sound settings.
The personal position relates to
settings selected from the menus.
Screen information
To display / remove the programme
number, the time,the sound mode
and the time remaining on the
timer. Hold down for 5 seconds to
permanently display the
programme number on the screen.
Standby
To set the TV to standby mode. To switch the TV set on again, press .,P - + or ñ/ô.
Mode selector * Pixel +
Switches the Pixel + demonstration mode on or off.
Teletext (p. 8)
Menu
To call up or exit the menus.
Selecting TV programmes
To move up or down a programme. The number and the sound
mode are
displayed for a few seconds.
For some TV programmes the title of the programme appears at the bottom of the screen.
Numerical keys
For direct access to programmes. For a 2 digit programme number, the 2nddigit must be entered before the dash disappears.
Previous programme
To access the previously viewed programme.
List of programmes
To display/clear the list of programmes.
Use the keys <> to
select a programme and the key
to display it.
* Mode selector
Press the Select key to select the required mode : DVD or AUX. The remote control indicator lights up to display the selected mode. It switches off automatically after 20 seconds if left idle.The remote control automatically returns to TV mode. The following keys are operational, depending on the equipment :
.ê·I¢∫I ÊÆ ∆ OK h <>≤≥(cursor) P - + ñ/ô∂º
4
Quick installation
When you turn on the TV set for the first time, a menu is displayed on screen.This menu prompts you to select the country and language for the menus:
If the menu is not displayed, press and hold down the VOLUME -+ keys on the TV set for 5 seconds to display the menu.
& Use the
<> keys on the remote control to
select your country and confirm with
≥.
If your country does not appear in the list, select choice “. . .”
é Next select your language using the
<> keys
and confirm with
≥.
The search starts automatically.All the available
TV programmes and radio stations will be stored. This operation takes a few minutes.The display shows the progress of the search and the number of programs found. At the end of the search, the menu disappears.
To exit or interrupt the search, press h.If no programme is found, consult the possible solutions p. 14.
If the transmitter or cable network sends the
automatic sort signal, the programs will be numbered correctly. In this case, the installation is complete.
( If this is not the case, you need to use the Sort
menu to number the programs correctly.
Some transmitters or cable networks broadcast their own sort parameters (region, language,etc.). In this case, indicate your choice using the
<> keys and
confirm with
≥.
& Positioning the television set
Place your TV on a solid stable surface. To avoid danger do not expose the TV to water,or a heat source (e.g. lamp, candle, radiator). Do not obstruct the ventilation grid at the rear.
é
Connecting the aerials
• Use the aerial connection lead supplied and connect the
: socket situated at the bottom
of the TV to your aerial socket.
• Insert the radio aerial lead supplied into the FM Antenna socket located at the bottom of the TV.
• Connect the power lead to the television and the mains plug into the wall socket (220-240 V/50 Hz).
• Arrange the leads by passing them through the television stand. Replace the stand cover.
For connecting other appliances see page p.11.
Switching on
To switch on the set, press the on/off key. A green indicator comes on and the screen lights up. Go straight to the Quick Installation chapter. If the TV remains in standby mode(red indicator), press the P
# key on the remote control.
The indicator will flash when you use the remote control.
Installing your television set
FM ANT
:
Plug’n’Play
Country
GB
Language
English
FM ANT.
5 cm
+-
PROGRAM
-
+
VOLUME
5 cm
5 cm
5
Manual store
Other settings in the Install menu
This menu is used to store the programmes one at a time.
& Press the
h key.
é With the cursor, select the Install menu then
Manual store:
System: select
Europe (automatic detection*)
or
Western Europe (BG standard),Eastern
Europe (DK standard),United Kingdom (I standard) or France (LL’ standard).
* Except for France (LL’ standard), you must select
choice France.
Search: press
.The search starts. Once a
programme is found, the scanning stops and its name is displayed (when available). Go to the next step. If you know the frequency of the required programme,this can be entered directly using the
ñ to ô keys.
If no picture is found, consult the possible solutions (p. 14).
( Program No.: enter the required number
with the
≤≥ or ñ to ô keys.
§ Fine Tune: if the reception is not satisfactory,
adjust using the
≤≥ keys.
è Store: press
.The program is stored.
! Repeat steps to ! for each programme to
store.
ç To quit the menus, press .
& Press the h key and select the Install menu: é Language: to change the display language for
the menus.
Country: to select your country (GB for
Great Britain).
This setting is used for the search, automatic programme sort and teletext display. If your country does not appear in the list, select “. . .”
Auto Store: to start automatic search for all
programmes available in your region. If the transmitter or cable network sends the automatic sort signal, the programmes will be numbered correctly. If this is not the case, you need to use the Sort menu to renumber the programmes (see p.5).
Some transmitters or cable networks broadcast
their own sort parameters (region, language,etc.). In this case, indicate your choice using the
<> keys
and validate with
.To quit or interrupt the search,
press h. If no picture is found, consult the possible solutions (p. 14).
( Name .:
If required,you can give a name to the
programmes and external connectors. Use the
≤≥ keys to move around the name display area
(5 characters) and the
<> keys to select the
characters.When the name has been entered, use the
key to exit.The name is stored.
Note: on installation, the programs are named automatically when an identification signal is sent.
§ To quit the menus, press
∂.
TV Menu
Picture
Sound
Features
Install
Mode
Manual Store
System
Search
Program No.
Fine Tune
Store
Europe
Program sort
& Press key h.The TV Menu is displayed on
the screen.
é With the cursor, select the Install menu
followed by the Sort menu.
Select the programme you want to move using
the
<> keys and press ≥.
Then use the
<> keys to select the new
number and validate with
≤.
( Repeat steps and for each program you
wish to renumber.
§ To quit the menus, press
∂.
TV Menu
Picture
Sound
Features
Install
Mode
Install
Language Æ •
Country Æ •
Auto Store Æ •
Manual Store Æ •
Sort Æ •
Name Æ •
0 1 2
3
4 5
6
Picture settings
Sound adjustments
& Press h then .The Picture menu is
displayed:
é Use the
<> keys to select a setting and the
≤≥ keys to adjust.
Once the adjustments have been made,select
Store and press to store them. Press
to exit.
Description of the adjustments:
• Brightness: this changes picture brilliance.
• Colour: this changes the intensity of the
colour.
• Contrast: this changes the difference
between the light and dark tones.
Sharpness: this changes the picture definition.
• Colour Temp.: this changes the colour
rendering:
Cold (bluer), Normal (balanced)
or
Warm (redder).
• Store: to store the picture adjustments and
settings.
& Press h, select Sound (>) and press .The
Sound menu is displayed:
é Use the <> keys to select a setting and the
≤≥ keys to adjust.
Once the adjustments have been made,select
Store and press
to store these changes.
To quit the menus, press
∂.
Description of the settings:
Equalizer:to adjust the sound tone (from
bass: 120 Hz to treble: 10 kHz).
Balance: this balances the sound on the left
and right speakers.
Delta Volume: this is used to compensate
any volume discrepancies between the different programs or EXT sockets.This setting is available for programs 0 to 40 and the EXT sockets.
AVL (Automatic Volume Leveller): this is
used to limit increases in sound, especially on program change or advertising slots.
Dolby Virtual:To activate / deactivate the
surround sound effect.
Store: this is used to store the sound
settings.
Feature settings
& Press h,select Features (>) and press .
You can adjust:
é Contrast +: automatic adjustment of the
picture contrast which permanently sets the darkest part of the picture to black.
NR (Noise Reduction): reduces picture
noise (snow) in difficult reception conditions.
Sleep : to select the length of time before the
set automatically switches to standby (from 0 to 240 minutes)
( PIP (Picture in Picture): to adjust the size
and position of the PIP screen.
§ To quit the menus, press
∂.
TV Menu
Picture
Sound
Features
Install
Mode
Picture
Brightness
Colour
Contrast
Sharpness
Colour Temp.
Store
39
TV Menu
Picture
Sound
Features
Install Mode
Sound
Equalizer Æ
Balance Æ •
Delta Volume Æ •
AVL Æ
Dolby Virtual Æ •
Store Æ •
120 Hz 500 Hz 1500 Hz 5 KHz 10 KHz
7
Screen Formats
The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen).4:3 pictures sometimes have a black band at the top and bottom of the screen (letterbox format).This function allows you to optimise the picture display on screen.
Press the
ë
key (or ≤≥) to select the different modes:
This TV set is also equipped with automatic switching which will select the correct-screen format, provided the specific signals are transmitted with the programmes.
4:3
The picture is reproduced in 4:3 format and a black band is displayed on either side of the picture.
Zoom 14:9
The picture is enlarged to 14:9 format, a thin black band remains on both sides of the picture.
Zoom 16:9
The picture is enlarged to 16:9 format.This mode is recommended when displaying pictures which have black bands at the top and bottom (letterbox format).
Subtitle Zoom
This mode is used to display 4:3 pictures using the full surface of the screen leaving the sub-titles visible.
Super Wide
This mode is used to display 4:3 pictures using the full surface of the screen by enlarging the sides of the picture.
Widescreen
This mode restores the correct proportions of images transmitted in 16:9.
Note: If you display a 4:3 picture in this mode, it will be enlarged horizontally.
Fullscreen
This mode displays images in full screen.
8
Teletext
Press :
You will obtain :
Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language (cable networks, satellite channels, etc.).
Teletext call
Selecting a
page
This is used to call teletext, change to transparent mode and then exit.The summary appears with a list of items that can be accessed. Each item has a corresponding 3 digit page number.
If the channel selected does not broadcast teletext, the indication 100 will be displayed and the screen will remain blank (in this case, exit teletext and select another channel).
Enter the number of the page required using the
ñ to
ô or- P + keys.Example: page 120,enter ó ò ñ.
The number is displayed top left,the counter turns and then the page is displayed.Repeat this operation to view another page.
If the counter continues to search, this means that the page is not transmitted. Select another number.
Direct access
to the items
Coloured areas are displayed at the bottom of the screen. The 4 coloured keys are used to access the items or corresponding pages.
The coloured areas flash when the item or the page is not yet available.
Contents
This returns you to the contents page (usually page 100).
Stop or resume
display of
sub-page
Certain pages contain sub-pages which are automatically displayed successively.This key is used to stop or resume display of sub-page.The indication
_ appears top left.
Hidden
information
Enlarge a
page
Favourite
pages
To display or hide the concealed information (games solutions).
This allows you to display the top or bottom part of the page and then return to normal size.
Instead of the standard coloured areas displayed at the bottom of the screen, you can store 4 favourite pages on the first 40 channels which can then be accessed using the coloured keys (red, green, yellow,blue). Once set, these favourite pages will become the default every time tetetext is selected.
& Press the h key to change to favourite pages mode. é Display the teletext page that you want to store.Press the coloured key of your choice for 3 seconds.
The page is now stored.
Repeat the operation with the other coloured keys. ( Now when you consult teletext,your favourite pages
will appear in colour at the bottom of the screen. To temporaly retrieve the standard items,press h.
To clear ever ything, and return the standard items as the default, press
for 5 seconds.
¤
¤
P
ı
P
Y
9
Using in PC monitor mode
PC Mode
Your TV can be used as a computer monitor. The PIP function lets you display a superimposed image to watch the TV channels at the same time.
You must first of all connect the computer and adjust the resolution (see p.12).
Choosing PC mode
Press the
U key on the remote control to
switch the TV to PC-A mode
(VGA In) or
PC-D mode
(DVI-D In).Press the W key to
return to TV mode.
If there is no PC signal for more than five seconds, the TV automatically goes into standby mode.
Using PIP (Picture in Picture)
While in PC mode you can call up a window for TV channels.
Attention
: the PIP feature is only available if a
computer is connected to the DVI-D In (see p. 12).
& Press the
g key to display the PIP screen.
The television image is reproduced in a small superimposed window.
é Subsequent presses of the
g key changes
the size of the window,switches to dual screen and turns PIP off.
Use the
- P + keys to change the programmes
of the PIP screen or the
µ key if you want to
display a picture from an appliance connected to the TV (e.g. video recorder,DVD).
Using the PC menus
Press the h key to access the specific settings of the PC monitor mode. Use the cursor to adjust them (the settings are automatically saved) :
Picture :
-
Brightness / Contrast
: to adjust the
brightness and contrast.
-
Horizontal / Vertical
:
to adjust the horizontal
and vertical placing of the image.
- Adjust Colour :
to adjust the colours (cold,
normal or warm).
Audio Selection :
to choose the sound reproduced on the TV (PC or TV/Radio). For example, you can listen to the radio while you use the computer.
Features :
-
Phase/Clock*
:
eliminates the horizontal
(
Phase) and vertical (Clock) interfering lines.
- View Format:
to choose between large screen
or the original format of the PC screens.
- PIP Controls :
to adjust the size and position
of the PIP screen.
- Auto Adjust :
position is set automatically.
Reset To Factory Setting :
to return to the
factory settings (default settings).
Mode Select :
to come back to TV or radio
mode.
*These adjustments are not available when a computer is connected to the
DVI-D In.
Using the radio
Choosing radio mode
Press the
 key on the remote control to
switch the TV to radio mode. Press the
W
key to return to TV mode. In radio mode the number and name of the station (if available), its frequency and the sound mode are indicated on the screen.
Selecting programmes
Use the
ñ/ô
or - P + keys to select the
FM stations (from 1 to 40).
List of radio stations
Press the
T
key to display / hide the list of radio stations. Then use the cursor to select a station.
Using the radio menus
Use the
h key to access the specific radio
settings.
Searching radio stations
If you have used the quick installation all the available FM stations will be stored. To start a new search use the
Install menu : Auto Store
(for a complete search) or Manual Store (for a station by station search).These menus work in exactly the same way as the TV menus.
Screen saver
In the
Features menu you can activate / close
the screen saver.
NOTE
– When using the LCD TV as a PC monitor, slight diagonal interference lines may be observed when it is
operated under electromagnetic interference environment but will not affect the performance of this product.
– For better performance, good quality VGA/DVI cable with good noise isolation filter is recommended.
10
Using in HD (High Definition) Mode
HD Mode
The HD (High Definition) mode allows you to enjoy clearer and sharper pictures through the DVI inputs if you are using a HD receiver/ equipment that can transmit high definition programming.
You must first of all connect the HD equipment (see p.13).
Choosing HD mode
Press the
j key on the remote control to
switch the TV to HD-A mode
(VGA In) or
HD-D mode
(DVI-D In).Press the W key to
return to TV mode.
Using the HD menus
Press the
MENU key to access the specific
settings of the HD mode. Use the cursor to adjust them (the settings are automatically saved):
Picture:
• Brightness: this changes picture brilliance.
• Colour: this changes the intensity of the
colour.
• Contrast: this changes the difference
between the light and dark tones.
Sharpness: this changes the picture
definition.
• Colour Temp.: this changes the colour
rendering:
Cool (bluer), Normal (balanced)
or
Warm (redder).
• Store: to store the picture adjustments and
settings.
Sound:
Equalizer:to adjust the sound tone (from
bass: 120 Hz to treble: 10 kHz).
Balance: this balances the sound on the left
and right speakers.
Delta Volume: this is used to compensate
any volume discrepancies between the different programs or EXT sockets.
AVL (Automatic Volume Leveller): this is
used to limit increases in sound, especially on program change or advertising slots.
Dolby Virtual:To activate / deactivate the
surround sound effect.
Store: this is used to store the sound
settings.
Features:
S
leep : to select the length of time before
the set automatically switches to standby (from 0 to 240 minutes).
PIP (Picture in Picture): to adjust the size and position of the PIP screen.
Here is the list of the different display resolutions available on your TV:
Digital HD (DVI-D)
Analogue HD (YPbPr)
EDTV 480 p EDTV 576 p 480 i 576 i
HDTV 720 p HDTV 1080 i
480 p 576 p
720 p 1080 i
Loading...
+ 32 hidden pages