Philips 19PFL3405/60, 22PFL3405/60, 26PFL3405/60 User Manual

EN User Manual
RU Руководство пользователя

Register your product and get support at

www.philips.com/welcome

19PFL3405/60

22PFL3405/60

26PFL3405/60

Österreich 0810 000 205 €0.07 pro Minute
België/Belgique 078250145 €0.03 Per minuut/Par minute
България [phone] Местен разговор
Hrvatska 01 6403 776 Lokalni poziv
Česká republika 800142840 Bezplatný hovor
Danmark 3525 8759 Lokalt opkald
Estonia 6008600 kohalik kõne tariifi
Suomi 09 2311 3415 paikallispuhelu
France 0805 025 510 numéro sans frais
Deutschland 0800 000 7520 gebührenfreier Anruf
Ελλάδα 0 0800 3122 1280 Κλήση χωρίς χρέωση
Magyarország 0680018189 Ingyenes hívás
Hrvatska 0800 222778 free
Ireland North 0800 055 6882

South 1800-PHILIPS 7445477

free

Italia 800 088774 Numero Verde
Қазақстан [phone] local
Latvia 52737691 local
Lithuania 67228896 local
Luxemburg/Luxembourg 40 6661 5644 Ortsgespräch/Appel local
Nederland 0800 0230076 Gratis nummer
Norge 22 70 81 11 Lokalsamtale
Polska [phone] Monitory i akcesoria komputerowe,
Portugal 800 780 903 Chamada Grátis
România 0800-894910

0318107125

Apel gratuit

Apel local
Россия [phone] 0.15 USD/minute
Србија [phone] Lokalni poziv

Slovensko 0800 004537 Bezplatný hovor
Slovenija 00386 12 80 95 00 lokalni klic
España 900 800 655 Teléfono local gratuito solamente para

clientes en España
Sverige 08 5792 9100 Lokalsamtal
Suisse/Schweiz/Svizzera 0844 800 544 Schweizer Festnetztarif
Türkiye 0800 261 3302 Şehiriçi arama
United Kingdom General No: 0800 331 6015

General National Rate No:
0870 911 0036

free

National rate

Україна 8-800-500-69-70 Місцевий виклик

www.philips.com/support

Model
Serial

This information is correct at the time of press. For updated information, see www.philips.com/support.

1

8 Product information 27

Supported display resolutions 27
T

uner/Reception/Transmission 27
Remote control 27
Power 27
Supported TV mounts 27
Product specification 28

9 Troubleshooting 29

General TV issues 29
TV channel issues

29
Picture issues 29
Sound issues 30
HDMI connection issues 30
Computer connection issues 30
Contact us 30

10 Index 31

Contents

1 Notice 2

2 Important 4

3 Your TV 7

Side controls and indicators 7
Remote control

7

4 Use your TV 9

Switch your TV on/off or to standby 9
Switch channels

9
Watch connected devices 10
Adjust TV volume 10
Use teletext 10

5 Use more of your TV 11

Access TV menus 11
Change picture and sound settings

11
Use advanced teletext features 14
Create and use list of favourite channels 14
Use the TV clock 15
Use timers 16
Use TV locks 16
Update the TV software 17
Change TV preferences 18
Access decoder channel 18
Reset the TV to factory settings 18

6 Install channels 19

Automatically install channels 19
Man

ually install channels 19
Rename channels 21
Rearrange channels 21

7 Connect devices 22

Back connectors 22
Side connector

s 24
Connect a computer 25
Use Philips EasyLink 26
Use a Kensington lock 26

English

EN

2

Pixel characteristics

This LCD product has a high number of
colour pixels. Although it has effective
pixels of 99.999% or more, black dots or
bright points of light (red, green or blue)
may appear constantly on the screen.
This is a structural property of the display
(within common industry standards) and
is not a malfunction.

Compliance with EMF

Koninklijke Philips Electronics N.V.
manufactures and sells many products
targeted at consumers which, like
any electronic apparatus, in general
have the ability to emit and receive
electromagnetic signals.
One of Philips’ leading Business Principles
is to take all necessary health and safety
measures for our products, to comply
with all applicable legal requirements and
to stay well within the EMF standards
applicable at the time of producing the
products.
Philips is committed to develop, produce
and market products that cause no
adverse health effects. Philips confirms
that if its products are handled properly
for their intended use, they are safe
to use according to scientific evidence
available today.
Philips plays an active role in the
development of international EMF
and safety standards, enabling Philips
to anticipate further developments in
standardisation for early integration in its
products.

Mains fuse (UK only)

This TV is fitted with an approved
moulded plug. Should it become
necessary to replace the mains fuse, this
must be replaced with a fuse of the same
value as indicated on the plug (example
10A).

1 Notice

2010 © Koninklijke Philips Electronics N.V. All
rights reserved.
Specifications are subject to change without
notice. Trademarks are the proper ty of
Koninklijke Philips Electronics N.V or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other than
those specified herein, confirmation of their
validity and suitability must be obtained. Philips
warrants that the material itself does not
infringe any United States patents. No fur ther
warranty is expressed or implied.

Warranty

Risk of injury, damage to TV or void of •
warranty! Never attempt to repair the TV
yourself.
Use the TV and accessories only as •
intended by the manufacturer.
The caution sign printed on the back of •
the TV indicates risk of electric shock.
Never remove the TV cover. Always
contact Philips Customer Support for
service or repairs.

Any operation expressly prohibited in •
this manual, or any adjustments and
assembly procedures not recommended
or authorised in this manual shall void the
warranty.

EN

3

1 Remove fuse cover and fuse.
2 The replacement fuse must comply with

BS 1362 and have the ASTA approval
mark. If the fuse is lost, contact your
dealer in order to verify the correct type.

3 Refit the fuse cover.

In order to maintain conformity to the EMC
directive, the mains plug on this product must
not be detached from the mains cord cable.

Copyright

®

Kensington and Micro Saver are registered US
trademarks of ACCO World corporation with
issued registrations and pending applications in
other countries throughout the world.

HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
All other registered and unregistered
trademarks are the property of their respective
owners.

English

EN

4

When stand mounting the TV, use only •
the supplied stand. Secure the stand to
the TV tightly. Place the TV on a flat, level
surface that can support the combined
weight of the TV and the stand.
When wall mounting the TV, use only a •
wall mount that can support the weight of
the TV. Secure the wall mount to a wall
that can support the combined weight of
the TV and wall mount. Koninklijke Philips
Electronics N.V. bears no responsibility
for improper wall mounting that result in
accident, injury or damage.

Risk of injury to children!

Follow these precautions to prevent the
TV from toppling over and causing injury to
children:

Never place the TV on a surface covered •
by a cloth or other material that can be
pulled away.
Ensure that no par t of the TV hangs over •
the edge of the surface.
Never place the TV on tall furniture (such •
as a bookcase) without anchoring both
the furniture and TV to the wall or a
suitable support.
Educate children about the dangers of •
climbing on furniture to reach the TV.

Risk of overheating!

Never install the TV in a confined space. •
Always leave a space of at least 4 inches
or 10 cm around the TV for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the TV.

Risk of damage to the TV!

Before you connect the TV to the power •
outlet, ensure that the power voltage
matches the value printed on the back
of the TV. Never connect the TV to the
power outlet if the voltage is different.

Risk of injury, fire or power cord damage!

Never place the TV or any objects on the •
power cord.
To disconnect the TV power cord easily •
from the power outlet, ensure that you
have full access to the power cord at all
times.

2 Important

Read and understand all instructions before you
use your TV. If damage is caused by failure to
follow instructions, the warranty does not apply.

Safety

Risk of electric shock or fire!

Never expose the TV to rain or water. •
Never place liquid containers, such as
vases, near the TV. If liquids are spilt on
or into the TV, disconnect the TV from
the power outlet immediately. Contact
Philips Consumer Care to have the TV
checked before use.
Never place the TV, remote control or •
batteries near naked flames or other heat
sources, including direct sunlight.
To prevent the spread of fire, keep
candles or other flames away from the
TV, remote control and batteries at all
times.

Never insert objects into the ventilation •
slots or other openings on the TV.
When the TV is swivelled ensure that •
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.

Risk of short circuit or fire!

Never expose the remote control or •
batteries to rain, water or excessive heat.
Avoid force coming onto power plugs. •
Loose power plugs can cause arcing or
fire.

Risk of injury or damage to the TV!

Two people are required to lift and carry •
a TV that weighs more than 25 kg.

EN

5

Disposal of your old product and
batteries

Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.

When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.

Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.

When you disconnect the power cord, •
always pull the plug, never the cable.
Disconnect the TV from the power •
outlet and antenna before lightning
storms. During lightning storms, never
touch any part of the TV, power cord or
antenna cable.

Risk of hearing damage!

Avoid using earphones or headphones at •
high volumes or for prolonged periods of
time.

Low temperatures

If the TV is transported in temperatures •
below 5°C, unpack the TV and wait
until the TV temperature matches room
temperature before connecting the TV to
the power outlet.

Screen care

Avoid stationary images as much as •
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.•
Clean the TV and frame with a soft, •
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the TV.
Risk of damage to the TV screen! Never •
touch, push, rub or strike the screen with
any object.
To avoid deformations and colour fading, •
wipe off water drops as soon as possible.

English

EN

6

Power management (Available in selected
models only)
The advanced power management of this TV
ensures the most efficient use of its energy.
You can check how your personal TV settings,
the level of brightness in current onscreen
pictures and the surrounding light conditions
determine the relative power consumption.

End of use

To inform yourself on the correct disposal
of the TV and batteries, refer to ‘Disposal of
your old product and batteries’ in the user
manual (see ‘Disposal of your old product and
batteries’ on page 5).

ECO-Green

High energy efficiency•
Low standby power•

Designed to facilitate recycling•
Philips continuously focuses on lowering
the environmental impact of its innovative
consumer products. We aim our efforts
towards environmental improvements
during manufacturing, reduction of harmful
substances, energy-efficient use, end-of-life
instructions and product recycling.
Thanks to our environmental effort, this TV
has been awarded the European Ecolabel –the
flower– www.ecolabel.eu
You can find detailed information on standby
energy consumption, warranty policy, spare
parts and recycling of this TV on the Philips
website for your country at www.philips.com.
This TV has features that contribute to
energy-efficient use. This TV was awarded
the European Ecolabel for its environmental
qualities.

Energy efficiency features

• Energy saving

The energy saving setting of the TV

combines several TV settings that result

in saving energy. See the smart settings in

the setup menu.

• Low standby power consumption

The class-leading and highly advanced

power circuitry brings down the power

consumption of the TV to an extremely

low level, without losing out on the

constant standby functionality.

EN

7

Remote control

a (Standby-On)

Switches the TV to standby if it is on.•
Switches on the TV if it is in standby.•

b

MENU

Toggles the main menu on or off.

c MHEG/TELETEXT

Toggles teletext on or off.

d

SOURCE

Selects connected devices.

1

22

4
5

7

6

10
11

12

13

14

8
9

2
3

21

18

17

16

15

20

19

3 Your TV

Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your TV at
www.philips.com/welcome.

This section gives you an overview of
commonly used TV controls and functions.

Side controls and indicators

a +/-: Increases or decreases volume.
b

(Home): Toggles the home menu on

or off.
c P/CH +/-: Switches to the next or

previous channel.
d

(Power): Switches the product on
or off. The product is not powered
off completely unless it is physically
unplugged.

e Remote control sensor.

2

1

3

4

5

2

1

3

4

English

EN

8

r GUIDE

Switches between channel grid and
programme list.

s SUBTITLE (For RF Digital TV only)

Enables or disables subtitles.

t DEMO (Used in selected models only)

Toggles the demonstration menu on or
off.

u

FORMAT

Selects a picture format.

v

INCR. SURR

Enables Incredible Surround for stereo
sources. Enables spatial mode for mono
sources.

Remote control usage

When using the remote control, hold it close
to the TV and point it at the remote control
sensor. Make sure that the line-of-sight
between the remote control and TV is not
blocked by furniture, walls or other objects.

~5m

~30˚

e Colour buttons

Selects tasks or options.

f AD (Audio Descriptor) (For RF Digital

TV only)

UK only: Enables audio commentary for
the visually handicapped.

g

OPTIONS

Accesses options relating to the current
activity or selection.

h OK

Confirms an entry or selection and
displays the channel grid, when watching
TV.

i

(Navigation buttons)

Navigates menus.

j

INFO

Displays program information, when
available. If the information spans multiple
pages, press OPTIONS to go to the next
page.

k

(Mute)

Mutes or restores volume.

l P +/- (Programme +/-)

Switches to the next or previous channel.
When the TV menu is on, this functions
as Page Up/Down.

m 0-9 (Numeric buttons)

Selects a channel or setting.

n

PICTURE (Smart picture)

Launches the picture menu.

o

SOUND (Smart Sound)

Launches the sound menu.

p

+/- (Volume +/-)

Increases or decreases volume.

q

BACK P/P (Previous channel)

Returns to a previous screen.•
Returns to the previously viewed •
channel.

EN

9

Switch channels

Press • P +/- on the remote control or
P/CH +/- on the side of the TV.

Enter a channel number using the •
Numeric buttons.
Press • OK to use the channel grid.
Press •

BACK P/P on the remote

control to return to the previous channel.

Note

When you use a favourite list, you can only •
select those channels in the list (see ‘Select a
favourite list’ on page 14).

Switch channels with the channel grid

The channel grid allows you to view all
available channels in a grid format.

1 Press OK.

The channel grid appears. »

2 Press to browse the channel grid.
3 Press OK to select a channel.

4 Use your TV

This section helps you perform basic TV
operations.

Switch your TV on/off or to
standby

To switch on

If the standby indicator is off, press •
(Power) at the side of the TV.
If the standby indicator is red, press •
(Standby-On) on the remote control.

To switch to standby

Press •

(Standby-On) on the remote

control.

The standby indicator switches to red. »

To switch off

Press •

(Power) at the side of the TV.

The standby indicator switches off. »

Tip

Though your TV consumes very little power •
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.

Note

If you cannot locate your remote control and •
want to switch on the TV from standby, press

P/CH +/- on the side of the TV.

English

EN

10

Use teletext

1 Press MHEG/TELETEXT.

The main index page appears. »

2 Select a page as follows:

Press the • Numeric buttons to enter
a page number
Press • P +/- to view the next or
previous page
Press the • Colour buttons to select a
colour coded item
Press •

BACK to return to a

previously viewed page

3 Press MHEG/TELETEXT to exit teletext.

Watch connected devices

Note

Switch on the device before selecting it as a •
source on the TV.

Use the source button

1 Press SOURCE.

The source list appears. »

2 Press to select a device.
3 Press OK to confirm your choice.

The TV switches to the selected »
device.

Adjust TV volume

To increase or decrease volume

Press •

+/-.

To mute or unmute sound

Press •

to mute the sound.

Press •

again to restore the sound.

EN

11

Change picture and sound
settings

Change picture and sound settings to suit your
preferences. You can apply pre-defined settings
or change settings manually.

Note

When watching TV or using external devices, •
press OPTIONS then select [Picture and
sound] for quick access to picture and sound
settings.

Use smart picture

Use smart picture to apply pre-defined
picture settings.

1 Press PICTURE.

The » [Smart picture] menu appears.

2 Press to select one of the following

settings.

• [Vivid]: Applies rich and dynamic

settings.

• [Standard]: Adjusts picture settings

to suit most environments and types
of video.

• [Cinema]: Applies settings for movie

viewing.

• [Game]: Applies settings for games.

• [Energy saving]: Applies low-energy

settings.

• [Natural]: Applies the best picture

quality.

• [Custom]: Lists customised picture

settings.

3 Press OK to confirm your choice.

The selected smart picture setting is »
applied.

5 Use more of

your TV

Access TV menus

Menus help you to install channels, change
picture and sound settings and access other
features.

1 Press MENU.

The menu screen appears. »

2 Press to select and navigate

through one of the following menus.

• [Picture] : Adjusts the picture setting

for optimal viewing.

• [Sound] : Adjusts the sound setting.

• [Features] : Accesses different

features like timer and TV lock.

• [Installation] : Selects channel

installation menu, adjusts preferences
and resets the TV to factory settings.

• [Software update] : Updates the TV

software.

3 Press OK to confirm your choice.
4 Press MENU to exit.

Picture

Sound

Features

Installation

Software update

Smart picture

Video contrast

Contrast

Brightness

Colour

Hue

Sharpness

Noise reduction

English

EN

12

• [Picture size]: Adjusts the viewing area.

(when set to maximum, you might see
noise or a rough edge of an image.)

• [Horizontal shift]: Adjusts the picture

horizontally for PC-VGA or HDMI input.

• [Vertical shift]: Adjusts the picture

vertically for PC-VGA or HDMI input.

Change picture format

1 Press FORMAT.

A picture format bar appears. »

2 Press to select a picture format.

The selected picture format is »
activated.

3 Press OK to confirm your choice.

Summary of picture formats

The following picture settings can be
configured.

Note

Depending on the format of the picture •
source, some picture settings are not available.

Manually adjust picture settings

1 Press MENU.
2 Select [Picture] and press OK.
3 Press to select the following

settings.

• [Smart picture]: Accesses pre-defined

smar t picture settings.

• [Video contrast]: Adjusts the intensity

of video contents, keeping backlight
unchanged.

• [Contrast]: Adjusts the intensity of

backlight areas, keeping video contents
unchanged.

• [Brightness]: Adjusts the intensity and

details of dark areas.

• [Colour]: Adjusts colour saturation.

• [Hue]: Compensates for colour variations.

• [Sharpness]: Adjusts sharpness in the

image.

• [Noise reduction]: Filters and reduces

noise in an image.

• [Tint]: Adjusts the colour balance in an

image.

• [Custom tint]: Customises tint setting.
(Only available if [Tint] > [Custom] is
selected)

• [Digital Crystal Clear]: Fine-tunes each
pixel to match surrounding pixels. This
produces a brilliant, high-definition image.

• [Dynamic contrast]: Enhances

contrast. A [Medium] setting is
recommended.

• [Dynamic backlight]: Adjusts

brightness of the TV backlight to
match lighting conditions.

• [Colour enhancement]: Makes

colours more vivid and improves
the details in bright colours. You can
switch this feature on or off.

• [PC mode]: Adjusts the picture when a
PC is connected to the TV via HDMI or
DVI.

• [Picture format]: Changes the picture
format.

EN

[Auto format]: (Not for

PC mode.) Enlarges the
picture automatically to
best fit the screen. The
subtitles remain visible.

[Super zoom]: (Not
for HD and PC mode.)
Removes the black bars on
the side of 4:3 broadcasts.
There is minimal
distortion.

[4:3]: Shows the classic 4:3
format.

13

Manually adjust sound settings

1 Press MENU.
2 Press to select [Sound] and press

OK.

3 Press to select the following

settings.

• [Smart sound] : Accesses pre-

defined smart sound settings.

• [Bass] : Adjusts the bass level.

• [Treble] : Adjusts the treble level.

• [Volume] : Adjusts the volume.

• [Balance] : Adjusts the balance of the

right and left speakers.

• [Dual I-II] : Selects audio languages if

dual sound broadcast is available.

• [Mono/Stereo] : Selects mono

or stereo if stereo broadcast is
available.

• [Surround] : Enables spatial sound.

• [Headphone volume] : Adjusts

headphone volume. (Available only
when the headphones are connected
to the TV).

• [Auto volume levelling] :

Automatically reduces sudden
volume changes, for example, when
switching channels.

• [Delta volume] : Levels out volume

differences between channels or
connected devices. Switch to the
connected device before you change
the delta volume.

[Subtitle zoom]: (Not
for HD and PC mode)
Displays 4:3 pictures over
the full area of the screen,
with sub-titles visible. Part
of the top of the picture is
clipped off.

[Movie expand 14:9]: (Not
for HD and PC mode.)
Scales 4:3 format to 14:9.

[Movie expand 16:9]:
(Not for HD and PC
mode.) Scales 4:3 format
to 16:9.

[Wide screen]: Scales 4:3
format to 16:9.

[Unscaled]: For HD
and PC mode only,
and in selected models
only. Allows maximum
sharpness. Some
distortion may be present
due to the broadcaster’s
systems. Set your PC
resolution to wide screen
mode for best results.

Use smart sound

Use smart sound to apply pre-defined sound
settings.

1 Press SOUND.

The » [Smart sound] menu appears.

2 Press to select the following settings.

• [Standard] : Adjusts sound settings

to suit most environments and types
of audio.

• [News] : Applies settings for spoken

audio, such as news.

• [Movie] : Applies settings for movies.

• [Custom] : Applies the settings that

were customised in the sound menu.

3 Press OK to confirm your choice.

The selected smart sound setting is »
applied.

English

EN

14

Select T.O.P. teletext broadcasts

Table Of Pages (T.O.P.) teletext broadcasts
allow you to jump from one subject to
another without using page numbers. T.O.P.
teletext is not broadcast on all TV channels.

1 Press MHEG/TELETEXT.

The teletext screen appears. »

2 Press INFO.

The T.O.P. overview appears. »

3 Press to select a subject.
4 Press OK to view the page.

Create and use list of
favourite channels

You can create a list of your preferred TV
channels so that you can find those channels
easily.

Select a favourite list

1 When watching TV, press OK to display

the channel grid.

2 Press OPTIONS.

The channel options menu appears. »

3 Press to select [Select list], then

press OK to enter.

The channel list options appear. »

4 Select [Favourite], then press OK.

Only channels in the favourite list »
appear in the channel grid.

Note

The favourite channel grid is empty until you •
add channels into the favourite lists.

Use advanced teletext
features

Access the teletext options menu

Access the teletext features through the
teletext options menu.

1 Press MHEG/TELETEXT.

The teletext screen appears. »

2 Press OPTIONS.

The teletext options menu appears. »

3 Press to select one of the following

options.

• [Freeze page] : Freezes the current

page.

• [Reveal] : Hides or reveals hidden

information on a page, such as
solutions to riddles or puzzles.

• [Cycle subpage] : Cycles through

subpages automatically if subpages
are available.

• [Language] : Switches to a different

language group to display a language
correctly when it uses a different
character set.

4 Press to make a selection, then

press OK to confirm.

5 Press BACK to exit the teletext

options menu.

Select teletext subpages

A teletext page can hold several subpages.
Subpages are displayed on a bar next to the
main page number.

1 Press MHEG/TELETEXT.

The teletext screen appears. »

2 Press P +/- to select a teletext page.
3 Press to enter a subpage.

EN

15

Remove a channel from a favourite
list

1 When watching TV, press OK.

The channel grid appears. »

2 Press to select a channel to

remove.

3 Press OPTIONS.
4 Select [Unmark as favourite], then press

OK.

The channel is removed. »

Use the TV clock

You can display a clock on the TV screen.

Set the TV clock

1 Press MENU.
2 Press to select [Features] >

[Clock]

The » [Clock] menu appears.

3 Press to enter time.
4 Select [Done] and press OK to confirm.
5 Press MENU to exit.

Display the TV clock

1 When watching TV, press OPTIONS.

The TV option menu appears. »

2 Select [Clock].
3 Press OK.

View all channels

You can exit a favourite list, and view all
installed channels.

1 When watching TV, press OK.

The channel grid appears. »

2 Press OPTIONS.

The channel options menu appears. »

3 Press to select [Select list], then

press OK or

to enter.

4 Select [All], then press OK.

All channels are displayed in the »
channel grid.

Note

All favourite channels are marked by an •
asterisk when you view the channel grid.

Add a channel to a favourite list

1 When watching TV, press OK.

The channel grid appears. »

2 Press to select a channel to add to

a favourite list.

3 Press OPTIONS.

The channel options menu appears. »

4 Select [Mark as favourite], then press

OK.

The channel is added to the favourite »
list.

Note

All favourite channels are marked by an •
asterisk in the channel grid.

English

EN

16

• [Time]: Sets the time to switch on

the TV.

• [Programme no.]: Selects the

channel or the connected device.

4 Press MENU to exit.

Tip

Select • [On timer] > [Activate] > [Off] to
disable this feature.
When

• [On timer] is switched off, only

[Activate] option is available.

Use TV locks

You can prevent your children from watching
certain programmes or channels by locking the
TV controls.

Set or change your PIN code

1 Press MENU.
2 Press to select [Features] > [Set

code] / [Change code].

The » [Set code] / [Change code] menu
appears.

3 Enter your code using the Numeric

buttons.

Follow the on-screen instructions to »
create or change your PIN code.

Tip

If you forget your code, enter ‘8888’ to •
override any existing codes.

Lock or unlock the TV

Lock the TV to prevent access to all channels
and connected devices.

1 Press MENU.
2 Press to select [Features] > [TV

lock].

You are prompted to enter your PIN »
code.

Use timers

You can set timers to switch the TV to standby
at a specified time.

Tip

Set the TV clock before you use timers. •

Automatically switch the TV to
standby (sleep timer)

Sleep timer switches the TV to standby after a
pre-defined period of time.

Tip

You can switch off your TV earlier or reset the •
sleep timer during the countdown.

1 Press MENU.
2 Press to select [Features] >

[Sleep timer].

The » [Sleep timer] menu appears.

3 Press to select a value between zero

and 180 minutes.

The sleep timer can be set in steps of »
five minutes. If set to zero, the sleep
timer is switched off.

4 Press OK to switch on the sleep timer.

The TV switches to standby after the »
specified time.

Automatically switch the TV on (on
timer)

You can switch on the TV from standby to a
specific channel at a specified time.

1 Press MENU.
2 Press to select [Features] > [On

timer].

3 Press to enter the [On timer] menu.

• [Activate]: Selects how often the TV

is switched on.

EN

17

Update the TV software

Philips continuously tries to improve its
products and we recommend that you update
the TV software when updates are available.
Check www.philips.com/support for availability.

Check the current software version

1 Press MENU.
2 Press to select [Software update]

> [Current software inf].

The TV displays the current software »
information.

Download the software

1 On your PC, open a web browser and go

to www.philips.com/support.

2 Download the latest software upgrade

file to your PC.

3 Decompress the ZIP-file.
4 Copy the autorun.upg file to the root

directory of the USB device.

Update using a USB device

1 Connect your USB device to the USB

port at the side of your TV.

2 Press MENU.
3 Press to select [Software update]

> [Local updates] > [USB].

4 Press OK to update the TV software

manually.

5 Follow the on-screen instructions to

complete the update.

Note

The TV restar ts after the software update is •
complete.

3 Enter your code using Numeric buttons.

The » [TV lock] menu appears.

4 Press to select [Lock] or [Unlock].
5 Press OK to confirm.

All channels and connected devices are »
locked or unlocked.

6 Press MENU to exit.

Note

Switch the TV off and on again for the change •
to take effect.
If you select

• [Lock], you have to enter your

code every time you turn on your TV.

Lock or unlock one or more channels

1 When watching TV, press OK to display

the channel grid.

2 Press to select a channel to lock or

unlock.

3 Press OPTIONS.
4 Press to select [Lock channel] or

[Unlock channel].

5 For each selection, press OK to lock or

unlock the channel.

You are prompted to enter your PIN »
code.

6 Enter your code and press OK.

If the channel is locked, a lock icon is »
displayed.

7 Repeat the process to lock or unlock

more channels.

Note

Switch the TV off and on again for the change •
to take effect.
If you access the locked channels by pressing

• P

+/- on the remote control or from the channel
grid, you are prompted to enter your PIN
code.

English

EN

18

4 Press to select [Channel], then press

to enter.

5 Select one channel to map to the

decoder/descrambler channel and press

OK to confirm.

6 Select [Status], then press to enter.
7 Select [EXT 1] (SCART), the connector

used by the decoder/ descrambler.

8 Press OK.
9 Press MENU to exit.

Note

Select • [None] if you do not want to map to
the decoder/descrambler channel.

Reset the TV to factory
settings

You can restore the default picture and sound
settings of your TV. The channel installation
settings remain the same.

1 Press MENU.
2 Press to select [Installation] >

[Factory settings].

3 Press to enter [Factory settings].
4 Select [Reset] to start resetting.
5 Press OK.
6 Press MENU to exit.

Disconnect a USB storage device

Caution

Follow this procedure to avoid damage to your •
USB storage device.

1 Wait for five seconds before you

disconnect the USB storage device.

Change TV preferences

Use the preferences menu to customise your
TV settings.

1 Press MENU.
2 Press to select [Installation] >

[Preferences].

• [Volume bar]: Displays the volume

bar when you adjust the volume.

• [EasyLink]: Enables one-touch play

and one-touch standby between
EasyLink-compliant devices.

3 Press to select your preference.
4 Press OK.
5 Press MENU to exit.

Access decoder channel

You can map channels provided through a
decoder or descrambler to your TV channel
selection. In this way, you can select these
channels by using the RC of your TV. The
decoder or a descrambler must be connected
to EXT 1 (SCART).

Set decoder channel

Map channels from a decoder or descrambler.

1 Press MENU.
2 Press to select [Installation] >

[Decoder].

3 Press to enter [Decoder] menu.

EN

19

5 Select [Start], then press OK to re-install

channels.

To stop searching, select • [Stop] and
press OK.

6 Press OK when installation is complete.

Manually install channels

This section describes how to search and store
analogue TV channels manually.

Step 1 Select your system

Note

Skip this step if your system settings are •
correct.

1 Press MENU.
2 Press to select[Installation] >

[Channel installation] > [Analogue:
manual install].

The » [Analogue: manual install] menu
appears.

3 Select [System], then press OK to enter.
4 Press to select your country or

region.

5 Press OK to confirm.
6 Press MENU to exit.

6 Install channels

The first time you set up your TV, you are
prompted to select a menu language and to
install TV and digital radio channels (if available).
This chapter provides instructions on how to
re-install and fine tune channels.

Automatically install channels

This section describes how to search and store
channels automatically.

Step 1 Select your menu language

Note

Skip this step if your language settings are •
correct.

1 Press MENU.
2 Press to select [Installation] >

[Menu language].

3 Press to enter [Menu language].
4 Press to select a language.
5 Press OK to confirm.
6 Press MENU to exit.

Step 2 Select your country

Select the country where you are installing the
TV. The available channels for the country are
installed on the TV.

1 Press MENU.
2 Press to select [Installation]

> [Channel installation] > [Channel
assistant].

The » [Channel assistant] menu appears.

3 Select [Yes] and then press OK to enter.
4 Press to select your country, then

press

to go to the next step.

English

EN

20

Skip channels

1 When watching TV, switch to the channel

that you want to skip.

2 Press MENU.
3 Press to select [Installation] >

[Channel installation] > [Analogue:
manual install].

The » [Analogue: manual install] menu
appears.

4 Press to select [Skip channel], then

press

to enter.

5 Press to select [Yes], then press OK

to skip current channel.

The selected channel is skipped when »
you press P +/- on your remote
control or view from the channel grid.

6 To skip more channels, repeat the

procedure.

Tip

To access the skipped channels, press • Numeric
buttons.
To restore a skipped channel, repeat steps 1 to

•

4, and then select [No] in step 5.

Step 2 Search and store new TV
channels

1 Press MENU.
2 Press to select [Installation] >

[Channel installation] > [Analogue:
manual install].

The » [Analogue: manual install] menu
appears.

3 Press to select [Search], then press

to enter.

4 Press Numeric buttons to manually enter

the three-digit frequency.

5 Press OK to begin search.

If a channel is unavailable at the »
selected frequency, the system searches
for the next available channel.

6 When the new channel appears, press

to select [Store as new channel].

This stores the channel under a new »
channel number.

7 Press to enter [Store as new channel].
8 Select [Yes], then press OK to store the

new channel.

9 Press MENU to exit.

Step 3 Fine-tune analogue channels

1 Press MENU.
2 Press to select [Installation] >

[Channel installation] > [Analogue:
manual install].

The » [Analogue: manual install] menu
appears.

3 Press to select [Fine tune], then press

to enter.

4 Press to adjust frequency.
5 Press OK to confirm.
6 Press to select [Store current

channel] to store channel number.

7 Press to enter [Store current channel].
8 Select [Yes], then press OK to store

current channel.

9 Press MENU to exit.

EN

21

Rearrange channels

After you install channels, you can rearrange the
order in which they appear.

1 When watching TV, press OK to display

the channel grid.

2 Press OPTIONS.

The channel options menu appears. »

3 Press to select [Reorder], then press

OK.

4 Select the channel to rearrange, then

press OK.

The selected channel is highlighted. »

5 Press to move the highlighted

channel to the desired location, then
press OK.

6 Press OPTIONS.

» [Done reordering] appears on the

screen.

7 Press OK to confirm.
8 Press BACK to exit the channel grid.

Rename channels

You can rename channels. The name appears
when you select the channel.

1 When watching TV, press OK to display

the channel grid.

2 Press to select the channel to

rename.

3 Press OPTIONS.

The channel options menu appears. »

4 Press to select [Rename channel],

then press OK.

A text input box appears. »

5 Press to select characters.
6 Press OK to confirm each character.
7 Select [Done], then press OK to finish

renaming channels.

Tip

The device name can be up to six characters •
long.
Press

• [Aa] to change an uppercase letter to a

lowercase letter and vice versa.

English

EN

22

a HDMI 1

Digital audio and video input from high­definition digital devices such as Blu-ray
players.

Connections via DVI or VGA require an
additional audio cable (see ‘Connect a
computer’ on page 25).

b EXT 1 (RGB/CVBS)

Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.

7 Connect devices

This section describes how to connect devices
with different connectors. Examples are
provided in the Quick Start.

Note

You can use different types of connectors to •
connect a device to your TV.

Back connectors

EN

23

f PC IN (VGA and AUDIO)

Audio and video input from a computer.

g SERV. U

For use by service personnel only.

VGA

PC AUDIO IN/ PC IN(AUDIO)

VGA

c For use by service personnel only.
d TV ANTENNA

Signal input from an antenna, cable or
satellite.

e EXT 2 (Y Pb Pr and AUDIO L/R)

Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.

TV ANTENNA

English

EN

24

c AUDIO L/R

Audio input from analogue devices
connected to VIDEO.

d VIDEO

Composite video input from analogue
devices such as VCRs.

Side connectors

a USB (Used for software upgrade only)

Data input from USB storage devices.

b

Stereo audio output to headphones or
earphones.

EN

25

• HDMI cable and HDMI-DVI adaptor

• VGA cable

DVI

PC AUDIO IN/ PC IN(AUDIO)

VGA

PC AUDIO IN/ PC IN(AUDIO)

VGA

Connect a computer

Before you connect a computer to the TV

Set the screen refresh rate on your •
computer to 60Hz.
Select a supported screen resolution on •
your computer.

Connect a computer with one of the
following connectors:

Note

Connections via DVI or VGA require an •
additional audio cable.

• HDMI cable

• DVI-HDMI cable

DVI

PC AUDIO IN/ PC IN(AUDIO)

English

EN

26

Use a Kensington lock

There is a Kensington security slot at the back
of the TV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.

Use Philips EasyLink

Your TV supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.

Note

The EasyLink-compliant device must be •
switched on and selected as the source.
Philips does not guarantee 100%

•

interoperability with all HDMI CEC devices.

Enable or disable EasyLink

Note

Do not enable Philips EasyLink if you do not •
intend to use it.

1 Press MENU.
2 Press to select [Setup] >

[Installation] > [Preferences] >
[EasyLink].

3 Select [On] or [Off].

Use one-touch play

1 After enabling EasyLink, press play on

your device.

The TV automatically switches to the »
correct source.

Use one-touch standby

1 Press (Standby-On) on the TV’s or

device’s remote control.

The TV and all connected HDMI »
devices switch to standby.

EN

27

Remote control

Type : PF 02E0 9B•
Batteries: 2 x AAA (LR03 type)•

Power

Mains power: 220-240V, 50Hz•
Standby power: < 0.3 W•
Ambient temperature: 5 to 40 degrees •
Celsius

Supported TV mounts

To mount the TV, purchase a Philips TV mount.
To prevent damage to cables and connectors,
be sure to leave a clearance of at least 2.2
inches or 5.5cm from the back of the TV.

Warning

Follow all instructions provided with the TV •
mount. Koninklijke Philips Electronics N.V.
bears no responsibility for improper TV
mounting that results in accident, injury or
damage.

TV screen
size (inches)

Required
pitch (mm)

Required
mounting bolts
(≤ 10mm)

19 75 x 75 4 x M4
22 75 x 75 4 x M4
26 75 x 75 4 x M4

8 Product

information

Product information is subject to change
without notice. For detailed product
information, go to www.philips.com/support.

Supported display resolutions

Computer formats

Resolution - refresh rate:•

640 x 480 - 60Hz•
800 x 600 - 60Hz•
1024 x 768 - 60Hz•
1280 x 768 - 60Hz•
1360 x 768 - 60Hz•

Video formats

Resolution - refresh rate:•

480i - 60Hz•
480p - 60Hz•
576i - 50Hz•
576p - 50Hz•
720p - 50Hz, 60Hz•
1080i - 50Hz, 60Hz•
1080p - 24Hz, 25Hz, 30Hz, 50Hz, •
60Hz.

Tuner/Reception/
Transmission

Aerial input: 75ohm coaxial (IEC75)•
TV system: PAL I, B/G, D/K; SECAM B/G, •
D/K, L/L’
Video playback: NTSC, SECAM, PAL•
Tuner Bands: Hyperband, S-channel, UHF, •
VHF

English

EN

28

Product specification

Design and specifications are subject to change
without notice.

19PFL3405

Without TV stand•

Dimension (WxHxD): 455 x 303.7 x •
56 (mm)
Weight: 3.16 kg•

With TV stand•

Dimension (WxHxD): 455 x 328.7 x •

137.9 (mm)
Weight: 3.32 kg•

22PFL3405

Without TV stand•

Dimension (WxHxD): 526.02 x •

343.5 x 55.79 (mm)
Weight: 4.0 kg•

With TV stand•

Dimension (WxHxD): 526.02 x •

369.5 x 148.96 (mm)
Weight: 4.2 kg•

26PFL3405

Without TV stand•

Dimension (WxHxD): 637.4 x 410.8 •
x 63 (mm)
Weight: 5.21 kg•

With TV stand•

Dimension (WxHxD): 637.4 x •

447.25 x 170 (mm)
Weight: 5.5 kg•

EN

29

TV channel issues

Previously installed channels do not appear in
the channel list:

Check that the correct channel list is •
selected.

Some channels are not automatically installed
on my TV:

During installation, make sure that •
you select the country where you are
installing the TV (see ‘Step 2 Select your
country’ on page 19).

Picture issues

The TV is on, but there is no picture:

Check that the antenna is properly •
connected to the TV.
Check that the correct device is selected •
as the TV source.

There is sound but no picture:

Check that the picture settings are •
correctly set.

There is poor TV reception from an antenna
connection:

Check that the antenna is properly •
connected to the TV.
Loudspeakers, unearthed audio devices, •
neon lights, high buildings and other large
objects can influence reception quality.
If possible, try to improve the reception
quality by changing the antenna direction
or moving devices away from the TV.
If reception on only one channel is poor, •
fine tune this channel.

There is poor picture quality from connected
devices:

Check that the devices are connected •
properly.
Check that the picture settings are •
correctly set.

9 Troubleshooting

This section describes commonly encountered
issues and accompanying solutions.

General TV issues

The TV does not switch on:

Disconnect the power cable from the •
power outlet. Wait for one minute then
reconnect it.
Check that the power cable is securely •
connected.

The remote control is not working properly:

Check that the remote control batteries •
are correctly inser ted according to the
+/- orientation.
Replace the remote control batteries if •
they are flat or weak.
Clean the remote control and TV sensor •
lens.

The standby light on the TV blinks red:

Disconnect the power cable from the •
power outlet. Wait until the TV cools
down before reconnecting the power
cable. If the blinking reoccurs, contact
Philips Consumer Care.

You forgot the code to unlock the TV lock
feature

Enter ‘8888’. •

The TV menu is in the wrong language.

Change the TV menu to your preferred •
language.

When turning the TV on/off/to standby, you
hear a creaking sound from the TV chassis:

No action is required. The creaking sound •
is normal expansion and contraction of
the TV as it cools down and warms up.
This does not impact performance.

English

EN

30

If there are intermittent sound •
disruptions, check that output settings
from the HDMI device are correct.
If you use an HDMI-to-DVI adapter •
or HDMI-to-DVI cable, check that an
additional audio cable is connected to

AUDIO (mini-jack only).

Computer connection issues

The computer display on the TV is not stable:

Check that your PC uses the supported •
resolution and refresh rate.
Set the TV picture format to unscaled. •

Contact us

If you cannot resolve your problem, refer to
the FAQs for this TV at
www.philips.com/support.

If the problem remains unresolved, contact
Philips Consumer Care in your country as
listed in this user manual.

Warning

Do not attempt to repair the TV yourself. This •
may cause severe injur y, irreparable damage to
your TV or void your warranty.

Note

Make a note of your TV model and serial •
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.

The TV did not save your picture settings:

Check that the TV location is set to the •
home setting. This mode offers you the
flexibility to change and save settings.

The picture does not fit the screen; it is too
big or too small:

Try using a different picture format. •

The picture position is incorrect:

Picture signals from some devices may •
not fit the screen correctly. Check the
signal output of the device.

Sound issues

There is a picture but sound quality is poor:

Note

If no audio signal is detected, the TV •
automatically switches the audio output off
— this does not indicate malfunction.

Check that all cables are properly •
connected.
Check that the volume is not set to 0. •
Check that the sound is not muted. •

There is a picture but the sound quality is
poor:

Check that the sound settings are •
correctly set.

There is a picture but sound comes from one
speaker only:

Verify that sound balance is set to the •
centre.

HDMI connection issues

There are problems with HDMI devices:

Note that HDCP (High-bandwidth Digital •
Content Protection) support can delay
the time taken for a TV to display content
from a HDMI device.
If the TV does not recognise the HDMI •
device and no picture is displayed, try
switching the source from one device to
another and back again.

EN

31

D

default settings 18
devices 10
devices

add to home menu 11
connect 22
watch 10

digital services

teletext 10, 14

disconnect USB 18
display

resolution 27

dispose 5

E

EasyLink

disable 26
enable 26
one-touch play 26
one-touch standby 26

end of life 5
environmental care 5
e-sticker 18

F

factory settings 18
favourites list

create list 14
view list 14

fine-tune channels 20

H

HDMI 30
home mode 18

I

install channels

automatic 19
manual 19

10 Index

A

analogue

fine-tune 20

antenna 22

B

batteries 27, 5
bracket for wall mount 27

C

care 5
channel grid 9
channels

favourites list 14
fine-tune 20
grid 9
install

automatic 19

manual 19
list 14
lock 17, 16
rename 21
reorder/rearrange 21
skip channels 20
switch 9
troubleshooting 29
tune 20, 20

child lock

lock channels 17
lock connected devices 16
PIN code 16

computer

connect 30, 25
display resolution 27

connect

antenna 22
PC 30, 25

connectors

HDMI 30, 22
overview 22

country 19

English

EN

32

R

rearrange channels 21
reception 29
recycle 5
register product 7
remote control

batteries 27, 5
overview 7
technical specifications 27

rename channels 21
reorder channels 21
resolution 27
restore default 18

S

safety 4
screen care 5
settings

picture 12
sound 13

shop mode 18
skip channels 20
smart picture 11
smart settings 11, 13
smart sound 13
software

version 17

sound settings 13
specifications 27
standby 9
subpages in teletext 14
switch

channels 9
on and off 9
source 10

T

Table of Pages 14
technical specifications 27
teletext

features 14
menu 14
subpages 14
Table of Pages 14
use 10

K

Kensington lock 26

L

language

troubleshoot 29

list

favourites list 14

location

country 19
home or shop 18

lock

Kensington lock 26
lock channels 17
lock connected devices 16
PIN code 16

M

menu

main menu 11
teletext 14

MHEG teletext 10
MPEG artifact reduction 12

O

on timer 16, 16
one-touch play 26
one-touch standby 26

P

PC

connect 25, 30
resolution 27

picture format

change 12
troubleshooting 29

picture settings 11
PIN code 16
pixel plus link 18
power 27
power consumption 27
preferences 18
product specifications 27

EN

33

timer

on timer 16, 16
sleep timer 16
standby 16

transmission 27, 29
transporting 4
troubleshooting 29
TV lock

lock channels 17
lock connected devices 16
PIN code 16

TV overview 7

U

USB

disconnect USB 18

V

video format

technical specifications 27

volume

adjust 10
automatic levelling 13
delta 13
mute 10

W

wall mount 4

EN

English

© 2010 Koninklijke Philips Electronics N.V.

All rights reserved.