Philips 2220 Service Manual

Steam Iron Mistral

GC2220

Philips Domestic Appliances and Personal Care

Service Manual

PRODUCT INFORMATION

Features

- Color : Aqua Purple

- Stainless steel soleplate

- Steam output (28 grams/min)

- Shot of Steam (60 grams/min)

- Vertical Shot of Steam

- 3 steam level

- Spray feature

- Tank capacity (250 ml)

- Cord length (1.8 m)

- 360 degrees swivel

- Integrated calc-clean feature

- Integrated cord winder feature

- Filling door

- Drip Stop feature

Safety Information

- This product meets the requirements regarding
interference suppression on radio and TV.

- After the product has been repaired, it should function
properly and has to meet the safety requirements and
legal regulations as officially laid down at this moment.

TECHNICAL INFORMATION

Voltage : 230 - 240 V
Frequency : 50 - 60 Hz
Power : 1500 - 1800 W
Dimension (F-box) : 306 (L) x 128 (W) x 157 (H) mm
Product weight : 1.2 kg

Water Advice

Suitable for tap water use. Advice to mix with equal portion
of distilled water or use only distilled water if the tap water is
very hard.

Stainless Steel Soleplate

The stainless steel soleplate glides smoothly & very easy to
clean. Stainless steel has a high scratch resistance and its
durability is very competitive in the market.

Shot of Steam

The shot of steam features a steam boost (60 grams/min) that
helps to remove stubborn wrinkles easily.

Vertical Shot of Steam

This features a steam boost in vertical position to remove
wrinkles in hanging garments.

Integrated Calc-clean

This ensures a longer life time of the iron and to allow the use
of normal tap water.

Drip Stop

Water is only released into steam chamber via the tank
valve when the soleplate temperature is high enough. If the
temperature is too low, the tank valve is closed by means
of a bi-metal disc. This prevents water from dripping onto
garment.

Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification

03/06

DISASSEMBLY ADVICE

GC2220

BACKPLATE 1

BALL SWIVEL 2

SWIVEL PLATFORM 20

CORDSET 3

Remove Screw A 1x
Remove Backplate 1
Remove Screw B 2x (cord clamp)

OPERATION KNOB 4

DOSING UNIT 5

INLAY 6

FILLING DOOR 19

PUMP 8

NOZZLE 9

Remove Screw A 1x
Remove Backplate 1
Remove Screw B 2x (cord clamp)
Remove Cord set 3
Remove Dosing unit 5
Remove Screw D 1x
Remove Inlay 6
Remove Operation knob 4

DIAL 10

RATTLE SPRING 11

TANK SET 12

TANK SEAL 106

LAMP ASSEMBLY 13

LAMP HOLDER 18

Remove Screw A 1x
Remove Backplate 1
Remove Screw B 2x (cord clamp)
Remove Cord set 3
Remove Dosing unit 5
Remove Screw D 1x
Remove Inlay 6
Remove Operation knob 4
Remove Screw C 3x

COVER 14

THERMOSTAT BUSH 15

SOLEPLATE 16

SEAL 102, 103

Remove Screw A 1x
Remove Backplate 1
Remove Screw B 2x (cord clamp)
Remove Cord set 3
Remove Dosing unit 5
Remove Screw D 1x
Remove Inlay 6
Remove Operation knob 4
Remove Screw C 3x
Remove Tank set 12
Remove Screw E 3x
Remove Cover 14

REPAIR INSTRUCTIONS

- Due to the high voltage of the iron, ONLY the specified cordsets must be used.

- Thermostat that is fitted to the soleplate (Pos 16) was pre-adjusted by the suppliers and secured by glue.
To avoid mal-function of the iron, NEVER re-adjust the thermostat.

- No information about the type number and voltage is stamped onto the typeplate. When replacing the cover (typeplate is at the
bottom), engrave at least the type number & voltage on the typeplate with a sharp object.

- Part number 107, 108 cannot be ordered separately.

OPTIONAL (accessories)

- No specific issues

2-4