VORTEX
BHS-770
USER MANUAL
CONGRATULATIONS!
As the proud new owner of the BHS 770 Bluetooth headset, you’re about to experience a massive upgrade in the way you listen to music.
In addition to the wireless convenience of Bluetooth and the customizable comfort of our variable-sized eartips, the BHS-770 features NanocoatingTechnology that safeguards against Sweat and Moisture.
So if you haven’t registered your free lifetime sweatproof warranty, please do so here: phaiser.com/extra.
Electronic user guide can be found at: phaiser.com/manuals.
Enjoy the headset! We hope it’ll help you #LiveLoud!
|2
THANKS FOR PURCHASING PHAISER PRODUCTS!
We’re so happy to have you on board, we’d like to invite you to
Join The Phaiser VIP Club!
Become a member of an exclusive club for new and existing customers with access to amazing benefits such as:
-Get 10% Off Your Next Order
-Free Replacement Eartips
-Early Access To New Products
-Free Monthly Giveaways
-24 Month Manufacturer’s Warranty
-Lifetime Sweatproof Warranty
Go to phaiser.com/extra to join!
3|
PRODUCT FEATURES
1.Double-Speaker design for strong Bass and HD Stereo Music.
2.Lightweight metal earbud design for all-day wearing comfort.
3.Patented wing-shaped earphone tips keep the buds in your ears during even the toughest workout.
4.Magnetic earbuds to securely stow your earphones while not in use.
SPECIFICATIONS
Bluetooth Specification: 4.1
Codec: aptX, SBC
Battery: Lithium Polymer Battery 3.7V
Standby Time: UP to 250 hours
Talk Time: UP to 8 hours
Music Playback Time: UP to 8 hours
Charging Time: around 1.5 hours
Operating Temperature: 14°F/-10°C to 140°F/60°C
|4
FIRST STEPS
To ensure best battery performance, it is recommended to charge the headset fully before first use.
Please open the charging port cover with your fingernail and connect the USB charging cable.
CHARGING THE HEADSET
Just plug in the micro USB charging cable. You can choose to either use a dedicated wall charger with USB ports (like a mobile phone charger), your computer‘s USB ports or basically any powered USB port. Once you start charging the indicator-LED on the control unit will be constantly red. After charge is completed, the LED will turn blue.
5|
INSTALLING THE COMPLY™ PREMIUM EARPHONE TIPS
1.Remove the silico ne tip from the earphone.
2.Clean the earphone
nozzle of any debris with a dry cloth.
3.Insert the earphone sound port nozzle into the tip‘s core at an angle. Then push the rest of the tip onto the ear phone‘s nozzle.
4.Repeat for the other side.
Only applies to models which include Comply™ Premium Earphone Tips.
|6
INSERTING THE COMPLY™ PREMIUM EARPHONE TIP
1.Squeeze down the foam tip and roll the tip into a thin, round cylinder.
2.Pull back and up on ear to open the canal. Gently insert
the entire tip into the ear.
3.Hold the tip in place until it expands.
Only applies to models which include Comply™ Premium Earphone Tips.
7|
Vol+
Skip forward
Accept call/Play/Pause
Voice assistant
On/Off
Vol-
Skip backward
Mute/Unmute
single click |
long press |
double click |
ON / OFF-FUNCTION
Hold the middle control button for 5s to turn the headset on. You will hear the audio message “Power On”. You will see the indicator LED turn blue for a short time, then turn off if automatically reconnected to your phone or stay blue while in pairing mode.
To turn the headset off, hold the middle control button for 2s. You will hear
|8
the “Power Off” message. The indicator LED will turn red and then shut off.
If you leave your earbuds powered on and walk away from them until they disconnect, they will automatically power down after 5 minutes.
Note regarding the functions described in this manual: Not all phones
or other connected Bluetooth devices support every function. For further information, please refer to your device’s user manual.
PAIRING
Before using the headset for the first time, you must pair it with another Bluetooth-enabled device (for example a phone). The headset will automatically enter pairing mode after you power it on and become visible to other devices.
1.Put the earphones in your ears and press and hold the middle control
9|
button. You will hear the audio message “Power On”.
While the LED is constantly blue, the headset is in pairing mode.
2.On your phone, find the Bluetooth menu and “search for” or “add” new devices. Select “BHS-770” from the list and pair it.
3.Once the headset is successfully connected to your phone, you will hear the audio message “Connected”.
ADDITIONAL PAIRING NOTES
1.If asked for the Pass/PIN code, please enter “0000”. Newer phones don‘t require this.
2.The headset will automatically turn off if not paired within 5 minutes.
|10
Loading...