haiserTM
STROBE
BHS-750
USER MANUAL
v2.0
The BHS-750 is more than just a Bluetooth headset. While providing best all day wearing comfort it lets you listen to your favorite tunes in premium stereo quality, keeping you connected to the world at all times.
By connecting to your phone or tablet through Bluetooth instead of cables, this headset saves you lots of hassle and supports your active lifestyle wherever you go.
The BHS-750 employs Nanocoating-Techno- logy to safeguard itself against Sweat and Moisture.
The BHS-750 complies with the Bluetooth V4.1 Standard.
2
Upper button
Increase volume, Next, FF
Middle control button
On/Off, Play/Pause, Answer/Hang up
Lower button
Decrease volume, Previous, REV
Product Features
1.Lightweight metal earbud design for all-day wearing comfort with strong Bass and HD Stereo Music.
2.Patented wing-shaped earphone tips keep the buds in your ears during even the toughest workout.
3.Magnetic earphone design enables you to securely stow your earphones while not in use.
4.The easily operable buttons offer functions for answering phone calls and controlling audio playback.
3
Specifications
Bluetooth Specification: Bluetooth 4.1
Battery: Lithium Polymer Battery 3.7V
Standby Time: UP to 250 hours
Talk Time: UP to 8 hours
Music Playback Time: UP to 8 hours
Charging Time: around 1.5 hours
Operating Temperature: 14°F/-10°C to 140°F/60°C
First Steps
To ensure best battery performance, it is recommended to charge the headset fully before first use.
Please open the charging port cover on the control unit with your fingernail, pull it out a little and plug in the micro USB charging cable supplied with your headset.
4
Charging the Headset
Just plug in the micro USB charging cable. You can choose to either use a dedicated wall charger with USB ports (like a mobile phone charger), your computers USB ports or basically any powered USB port. Once you start charging the indicator-LED on the control unit will be constantly Red. After the charge is complete, the LED will turn Blue.
Note regarding volume control
Please be aware that fast pressing Volume plus or Volume minus will trigger the nextor previous track function.
In order to smoothly increase or decrease volume, please allow 0,5s between presses.
5
Installing the Comply Earphone
Replacement Tips
1.Remove the silicone tip from the earphone.
2.Clean the earphone nozzle of any debris with a dry cloth.
3.Insert the earphone sound port nozzle into the tip‘s core at an angle. Then push the rest of the tip onto the earphone‘s nozzle.
4.Repeat for the other side
6
Inserting the Comply™ Premium
Earphone Tip
1.Squeeze down the foam tip and roll the tip into a thin, round cylinder.
2.Pull back and up on your ear to open the canal. Gently insert the entire tip
into the ear.
3.Hold the tip in place until it expands
7
Note regarding the functions described in this manual: Not all phones or other
connected Bluetooth devices support every function. For further information, please refer to your device’s user manual.
Pairing
Before using the headset for the first time, you must pair it with another Bluetooth-en- abled device (for example a phone). The headset will automatically enter pairing mode after you power it on and become visible to other devices. While in pairing mode, the headset will show a solid Blue LED.
1.Put the earphones in your ears and keep the middle button on the control unit pressed until you hear the audio message “Power On”. The LED will turn blue.
2.On your phone, find the Bluetooth menu. Scan for new devices. Look for “BHS-750” on the list of unpaired devices and tap it. Hint: Sometimes it may be neccesary to turn Bluetooth Off on your phone and back On to see the unpaired device.
3.Once the headset is successfully connected to your phone, you will hear the audio message “Connected”.
8
Loading...