Pfister 8P5-DY00 User Manual [en, es, fr]

8P5 Series

Serie 8P5
Série 8P5

Shower Only Trim Kit

Juego con acabado para

duchas solamente

Douche seule

Kit de garniture

Lifetime Limited Mechanical & Pnish Warranty

Price Pster

Covers Pnish and Pfunction for as Long as You

Own Your Home

(Commercial Applications Limit the Duration of the

Warranties as Provided Below)

Price Pster provides the following Warranties for its products. Proof
of Purchase may be required in order to obtain any of the benets set
forth below.

Limited Warranties: Price Pster warrants that for as long as the original
purchaser owns the home in which the Price Pster product (the “Product”)
is originally installed, the Product will be free of all defects in material
and workmanship that would impair the intended and proper use of the
Product. If the Product is installed in a commercial application, the above
mechanical warranty shall be limited for a period of ten (10) years from the
date of purchase of the Product.

Price Pster warrants against deterioration of the Product’s nish for as long
as the original purchaser owns the home in which the Product is originally
installed. If the Product is installed in a commercial application, the above
nish warranty for Products that do not contain the Pforever nish shall be
limited to a period of ve (5) years from the date of purchase.

Exclusive Remedy: In the event of any defect in the Product that breaches
the foregoing warranties, Price Pster, at its option, will repair or replace
the defective part of the Product. Repair or replacement of the Product is
the exclusive remedy.

For any remedy under this warranty, Price Pster is to be notied describing
the problem. In order to notify Price Pster and receive assistance or service
under this warranty, the original purchaser may: (1) call 1-800-Pfaucet
(1-800-732-8238) for a consumer service representative who can assist
you, or (2) write consumer service department c/o Price Pster Inc., 19701
DaVinci, Lake Forest, CA 92610, and include a description of the problem,
model number, your name, address, phone number and approximate date
of purchase, or (3) email Price Pster’s customer service department by
going to www.PricePster.com, or (4) notify the location or distributor
from which the Product was purchased. In any case, you may be required
to return the Product to Price Pster for inspection and proof of purchase
may be required.

Limitations and Exclusions:
PRICE PFISTER WILL NOT BE LIABLE FOR ANY OTHER DAMAGES
OR LOSSES, INCLUDING, BUT NOT LIMITED TO, INCIDENTAL
AND/OR CONSEQUENTIAL DAMAGES, REGARDLESS OF THE
LEGAL THEORY ASSERTED, INCLUDING ANY CLAIM OR BREACH
OF WARRA NTY HEREUND ER OR ANY OTHER CAUSE, AND
WHETHER ARISING IN CONTRACT OR IN TORT (including negligence
and strict liability).

Price Pster has the right to discontinue or modify any product at any
time. Some states do not allow limitations or exclusions of incidental or
consequential damages, so the above limitations or exclusions may not
apply to you. This warranty gives you specic legal rights, and you may
also have other rights which vary from state to state.

The above warranties do not cover damage resulting from improper
maintenance, repair, cleaning or installation, misuse, abuse, alterations,
accidents or acts of God.

07-18-08 EO7361B

Copyright © 2008, Price Pster, Inc.

Garantía Mecánica y sobre el Acabado Limitada de por Vida

Price Pster

Cubre las funciones y el acabado por el tiempo en que usted sea

propietario de su casa

(Las Aplicaciones Comerciales Limitan la Duración

de las Garantías)

Price Pster suministra las siguientes Garantías para sus productos. Es
posible que se requiera la presentación de una Prueba de compra para obtener
cualquiera de los benecios indicados a continuación.

Garantías Limitadas: Price Pster garantiza que por el tiempo en que el
comprador original sea propietario de la casa en el que se hubiese instalado
inicialmente el producto Price Pster (el “Producto”), este Producto estará
libre de todo defecto en material y mano de obra que pueda afectar el
uso proyectado y correcto del Producto. Si el Producto se instala en una
aplicación comercial, la garantía mecánica que antecede estará limitada a un
período de diez (10) años a partir de la fecha de compra del Producto.

Price Pster garantiza el acabado del Producto contra deterioro por el
tiempo en que el comprador original sea propietario de la casa en la que
hubiese instalado inicialmente el Producto. Si el Producto se instala en
una aplicación comercial, la garantía sobre el acabado que precede para
Productos que no contengan el acabado “Pforever” estará limitada a un
periodo de cinco (5) años a partir de la fecha de compra.

Recurso exclusivo: En el caso de que haya un defecto en el Producto
que viole las garantías que preceden, Price Pster, a su opción, reparará o
reemplazará la pieza defectuosa del Producto. La reparación o el reemplazo
del Producto es el recurso exclusivo.

Para todo recurso con respecto a esta garantía, Price Pster deberá ser
noticado, con una descripción del problema. Para noticar a Price Pster y
recibir ayuda o servicio bajo esta garantía, el comprador original puede: (1)
llamar al 1-800-Pfaucet (1-800-732-8238) para hablar con un representante
de servicio al cliente que lo pueda ayudar, o (2) escribir al departamento de
servicio al consumidor, c/o Price Pster Inc., 19701 DaVinci, Lake Forest,
CA 92610 U.S.A., e incluir una descripción del problema, el número del
modelo, su nombre, dirección, número de teléfono y fecha aproximada de
compra, o (3) enviar un e-mail al departamento de servicio al consumidor
de Price Pster entrando en la página web www.PricePster.com, o (4)
avisarle al lugar o al distribuidor en donde se compró el Producto. En
cualesquiera de los casos, podría pedírsele devolver el Producto a Price
Pster para su inspección y es posible que se requiera la presentación de
una prueba de compra.

Limitaciones y Exclusiones:
PRICE PFISTER NO SE HARÁ RESPONSABLE DE NINGÚN OTRO DAÑO
O PERJUICIO, INCLUYENDO, PERO SIN ESTAR LIMITADO A DAÑOS
INCIDENTALES Y/O CONSECUENTES, SIN IMPORTAR LA TEORÍA LEGAL
A LA QUE SE ALEGUE, INCLUYENDO TODO RECLAMO O VIOLACIÓN DE
LA GARANTÍA PRESENTE O CUALQUIER OTRA CAUSA, Y YA SEAN COMO
RESULTADO DE LA LEY CONTRACTUAL O LA DE ANTECEDENTES
(incluyendo negligencia y responsabilidad estricta).

Price Pster tiene el derecho de discontinuar o modicar cualquier producto
en cualquier momento. Ciertos estados no permiten limitaciones o
exclusiones de daños incidentales o consecuentes, de manera que es posible
que las limitaciones o exclusiones que preceden no correspondan en su caso.
Esta garantía le otorga derechos legales especícos y es posible que usted
también tenga otros derechos que dieren entre un estado y otro.

Las garantías que preceden no cubren daños y perjuicios ocasionados
como resultado de mantenimiento, reparaciones, limpieza o instalación
inadecuados, mal uso, abuso, alteraciones, accidentes o causas de fuerza
mayor.

Price Pster

Une garantie limitée à vie

pour ce qui est de l’aspect mécanique et de la nition,

tant et aussi longtemps que vous serez propriétaire

de votre domicile.

(Garantie limitée en cas d’utilisation commerciale

– voir ci-dessous)

Veuillez noter qu’une preuve d’achat peut être requise en cas de recours
au titre de la garantie.

Garantie limitée : Tant et aussi longtemps que l’acheteur sera propriétaire
du domicile dans lequel le produit Price Pster a été installé, nous lui
garantissons que ce dernier sera exempt de tout défaut de matériau ou
vice de fabrication pouvant en entraver l’utilisation correcte tel que prévu.
Dans le cas des produits d’utilisation commerciale, la garantie exprimée
ci-dessus est restreinte à une période de dix (10) ans.

Par ailleurs, tant et aussi longtemps que l’acheteur sera propriétaire
du domicile dans lequel le produit Price Pster a été installé, nous lui
garantissons un article dont la nition ne pourra se détériorer. Dans le cas
des produits d’utilisation commerciale qui ne comportent pas la nition
“Pforever”, la garantie est restreinte à une période de cinq (5) ans.

Recours exclusif : En cas de défaut du produit relevant de la garantie,
le fabricant pourra, à sa discrétion, réparer ou remplacer la partie
défectueuse. Cette mesure constitue un recours exclusif.

Pour tout recours au titre de la garantie, les clients doivent communiquer
avec le fabricant pour lui faire part du problème. L’acheteur d’origine
peut : (1) composer le 1 800 732-8238 pour parler à un représentant qui
l’assistera; (2) écrire au service à la clientèle : Price Pster Inc., 19701
DaVinci, Lake Forest, CA 92610 U.S.A., et fournir une explication du
problème, en précisant le numéro de modèle, son nom, son adresse et
son numéro de téléphone, ainsi que la date d’achat approximative; (3)
communiquer par courrier électronique avec le service à la clientèle en
utilisant le site www.PricePster.com, ou (4) aviser le détaillant qui a
vendu le produit. On peut être obligé de retourner le produit au fabricant,
et une preuve d’achat peut être exigée.

Limitations et exclusions :
PRICE PFISTER NE SERA PAS RESPONSABLE DES AUTRES
DOMMAGES OU PERTES, Y COMPRIS LES DOMMAG ES
INDIRECTS, INDÉPENDAMMENT DE TOUTE THÉORIE
Y COMPRIS TOUTE RÉCLAMATION SELON LAQUELLE IL
Y AURAIT EU RUPTURE DE GARANTIE, QUE CE SOIT PAR
RAPPORT À UN CONTRAT OU PAR VOIE DE NÉGLIGENCE (cela
comprend la négligence et la responsabilité stricte).

Price Pster se réserve le droit de discontinuer ou de modier un produit
en tout temps. Certaines provinces ne permettent pas l’exclusion ou la
limitation des dommages indirects, de sorte que la limitation exprimée
peut ne pas s’appliquer. La présente garantie octroie aux clients certains
droits d’ordre juridique, et ceux-ci pourraient en avoir d’autres, selon la
province où ils habitent.

La garantie ne s’applique pas aux dommages résultant d’un entretien,
d’un nettoyage ou d’une installation fautivement effectués, ou encore
d’usages fautifs, d'abus, de modications, d'accidents ou de catastrophes
naturelles.

JURIDIQUE,

34245-0100

A COMPANY

ENGLISH

Thank you for purchasing this Price Pster product. All Price Pster products are carefully engineered, and factory tested to provide long
trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow illustrated instructions. If you

have any questions regarding your product installation call 1-800-Pfaucet (1-800-732-8238)

.

1 BEFORE PROCEEDING

WARNING: Read all the instructions completely before proceeding. Price

Pster recommends calling a professional if you are uncertain about installing

this product!
Th is pr od uct shoul d be i nstal le d in accor da nce with a ll lo ca l an d stat e plu mbing
and building codes.

ENGLISH

WARNING: This product has been designed for use with the Price Pster

0X8 series pressure balancing valve. It will not work with any other product.

Please review the 0X8 valve installation instructions before installing this
product.

2 SHUT OFF WATER SUPPLY

Locate water supply inlets and shut off the water supply valves. These are
us uall y foun d nea r t he w ate r met er. If y ou a re re pl aci ng an exis ti ng u nit , r emo ve
the old unit and clean the mounting surface thoroughly.

3

5

INSTALLATION STEPS

1 1/4” Dia.

4 3/4” Dia.

4” Dia. for Thin

Wall Installation

Shower Only

48”

Shower Only

8” Min.

1 1/4” Dia.

30”

3 TOOLS RECOMMENDED

• PTFE plumber's tape or thread sealant

• Philips head screwdriver • Adjustable wrench • Pipe wrench

• Flashlight • Cloth

Your installation will require a pipe nipple for the spout installation as well as
other additional tools.

4

E

J

F

D

H

B

A

C

G

K

5 WORK AREA INSPECTION

Verify that the hole sizes and positions in the wall are correct.

6

6A

A

6B

B

6C

6A

4 CHECKING THE CONTENTS OF THE BOX

Upon opening the box, check to ensure that all of the following items are included.

A Trim Flange with Gasket B Washer
C Retainer Sleeve D Extension Stem E Handle
F Set Screw G Hex Wrench H Shower Arm
J Shower Head K Shower Flange

If any of these items are missing, please contact Price Pster Consumer Service

at 1-800-Pfaucet (1-800-732-8238).

6 PLASTERGUARD OPTIONS

A.

For installation using plasterguard, knock out Center Section (6B) from Plasterguard
(6A). The use of plasteguard is optional for standard installations.

B. For installation without plasterguard, remove Screws (6C), and

2

Plasterguard (6A).

7

7D

7E

7A

ENGLISH

9

ENGLISH

7G

9B

9A

7B

7C

7C

7 TRIM FLANGE ATTACHMENT

Position Flange (7A) on Valve (7B) with Drain Hole (7C) at the bottom. Place
Protective Washer (7D) on the short end of the reversible Retainer Sleeve (7E).
Screw Retainer Sleeve (7E) onto threaded section of the Stem and Bonnet (7G).
Tighten Retainer Sleeve (7E) by hand until Flange (7A) is snug to nished wall
surface. If the short end of the Retainer Sleeve (7E) is too short, reverse it to
use the longer end.

8

8D

8A

9 SHOWER ARM INSTALLATION

Insert the end of Shower Arm (9A) through the Shower Flange (9B).
Apply PTFE plumber's tape to both ends of Shower Arm (9A) according to
ma nufac tu rer 's ins tr uct io ns. Scre w t he e nd o f Show er Arm ( 9A) i nto pipe el bow
inside the wall. Slide Shower Flange (9B) tight to the wall.

10 UNIT START UP

Turn on hot and cold water supplies, and check all connections for leaks.

11

FULL HOT

8C

8E

8 HANDLE ATTACHMENT

Screw Stem Extender (8A) onto Valve Stem (8B). Thread Set Screw (8C) into
Handle (8D) and thread it in only three to four turns. Place Handle (8D) onto
Stem Extender (8A) and tighten Set Screw (8C) by using Hex Wrench (8E) that
is provided.

Make sure Set Screw (8C) is securely tightened to handle

8B

(8D)

.

11A

CLOSED

11 VALVE FUNCTION

By rotating the Lever Handle (11A ) slightly counterclockwise, the valve will

be fully activated to the “COLD” position. The water temperature can be

increased by continuing to rotate the Lever Handle (11A) in a counterclockwise
direction.

OPEN

FULL COLD

3

12

ENGLISH

ENGLISH

14

14A

12 FINAL FLUSHING

For nal ushing, turn valve on and allow water to run for several minutes untill

all foreign mater clears the line.

13

13B

14 SHOWER HEAD FUNCTION

To adjust spray, turn Outer Shell (14A) to a desired spray pattern (for multi­function shower head only).

13A

13 SHOWER HEAD INSTALLATION

Thread Shower Head (13A) onto Shower Arm (13B).

Make sure Shower Head (13A) is securely tightened to Shower Arm

(13B).

MAINTENANCE & CARE

CAUTION: Maintenance

DISASSEMBLY

1. Replacement parts may be available at the store where you purchased
your faucet.

2. When replacement parts are not available, please write or call Price

Pster Consumer Service.

3. Always turn off water and relieve pressure before working on your
faucet.

NOTE: Trim Care

Cleaning Instructions:

For all Handles and decorative nishes, use only a soft damp cloth to clean

and shine. Use of polish, detergents, abrasive cleaners, organic solvents or
acid may cause damage. Use of other than a soft damp cloth will nullify

our warranty!
Special Trim:

Trim products which contain Porcelain or other similar substance are not

acceptable for public areas or Commercial use. Installation of Said Trim is

at Users Risk!

4

TROUBLE SHOOTING TIPS

ENGLISH

Water ow is very low.

Check the Cartridge Assembly (D), for debris. Sediment where the water enters
the Shower Head (G) can also cause this symptom.

G

L

ENGLISH

K

Water starts out hot and becomes cooler as handle is rotated counter

J

F

C

A

E

D

clockwise.

This is a potentially hazardous situation and should be corrected before using

the unit. Check the hot and cold inlet positions (hot- left cold-right). If you have

a back to back installation, (where hot and cold inlets are reversed) refer to
Valve Body instruction sheets for back to back installation.

Water ows from the shower head while lling the tub.

Check the position of the Valve Body (J). The letters “SHWR” should be cast
into the top and “TUB” on the bottom.

B

Temperature or ow does not remain consistent.

The Cartridge Assembly (D) may need cleaning. Shut off water supply. Remove
Handle Assembly (A), unscrew Retainer Sleeve (B) and remove Flange (C).
Remove Cartridge assembly (D) and inspect Cartridge (E) and inlets for debris
or sediment and ush with water. Reassemble whole unit and test. If problem
persists you may need to replace the Cartridge (E).

Sleeve (B) is too short.

Extension kit 910-563 is available at a nominal charge for valves which have

been roughed-in too far back in the wall. The kit contains a one inch stem
extension, and longer screw and a sleeve which is one inch longer than the

972-300.

Dripping from either the tub spout or shower head.

Clean the Cartridge Assembly (D). Check to ensure the two Oval O-Rings (F)
on the back of the Cartridge (E) are in place. Reassemble cartridge, stem and

bonnet assembly and handle. Turn on the water and test. If the unit still leaks,
replace the Cartridge (E).

Water doesn’t get hot enough.

Remove Handle (A), Sleeve (B) and Flange (C) and then refer to Valve Body
instruction sheets for adjusting temperature range.

Cleaning Shower Head

Over time, the screen (K) in your shower head may become clogged with debris.
To clean the screen (K), unscrew shower head from shower arm and separate
the seal (L) and screen (K). Rince parts and replace.

1–800–PFAUCET (1–800–732–8238)

For Toll-Free Pfaucet information call
1–800–PFAUCET (1–800–732–8238)
or visit www.pricepster.com

Make sure that both hot and cold water inlets are turned on.

• Installation Support

• Care and Warranty Information

5