c
-v\#
(PHBt
'/r';
h
Spare
Parts
PFAFF
PFAFF
Catalogue
467
465
G.M.
No. 12414
engl.
R 1065
PFAFF
AG
-
KAISERSLAUTERN
BRANCH
PrintedinGermany
Foreword
This
parts catalogue
the Pfaff
All
All
parts.
It isabsolutely necessary that the ten-digit part number be stated on all orders for spare parts.
The central portion of this number, as a rule, is identical with the old part number.
tional cases, the old part number is listed in parenthesis below the new ten-digit part number.
Assemblies incorporating extremely tight-fitting component parts will be exchanged for re
placement assemblies. They are marked "Replacement Assembly" in the list and their compo
nents
blies,
Part number changes will be published on correction sheets.
Subject to altefations in design.
467-6
component parts are grouped together as they are arranged in the machine.
underlined part numbers
are
provided with a foot note. For particulars regarding the exchange of these assem
please
refer to Circulars Nos. 41/49
contains
the
front
parts,
arm
parts,
bedplatepartsand
as well as the supplementary parts of the Pfaff
signify
assemblies
end
41/61.
which
are made up of several component
465-6.
accessory
partsof
In
excep
September
1965
G.M.PFAFF
Koiserslautern
AG
Branch
to
PFAFF
PFAFF
467-6
465-6
Lockstitch High-Speed Sewing Machines
Lockstitch
high-speed sewing machine organized with or
dinary bottom feed and variable top feed, double-revolu
tion rotary hook (moving counter-clockwise), positive me
chanical opener, link take-up, face cover bobbin winder,
feed
regulator
and
forward-reverse feed control.
Same as Pfaff 467-6, but organized with compound feed
and
ordinary
top
feed.
91-069035-45
91-069106-35-
11-266171-35-®
91
-069
637-35
91-700
335-35
PFAFF
467-6/1;
11-314
220-15
•12-610
91-069036-05
91-069
-6/2
91-069
91-069
034-05
91
-069
033-05
210-45
91-701
362-15
91-069
030-91
91-069
005.04-£
043-15-Q
12-610
210-45
91-069
040-
019-91
11-314
j
220-15
91
-061
•91-069
12-510110-45
91-701
337-45
020-91
360-15
91-169144
91-169
135-12-J-'
11-105177-15
91-701
99-169
11-178166-15
14
91-169129-14
91
-069
91-169125-91
91-169104-04
91-069060-92
045-45
91-169137-05
99-069
713-01
91-069
91-169137-05
-069
91-169126-12
-069
707-01
-700
062-45
707-01
243-15
11-314
91
-069
049-05
91-169140-05
220-15
91-069
91-069
056-05
12-305
111-15
^
11-105171-15
794-91
91-000
11-314169-15
624-15
91-009
91-006
813-15
91-006
91-000256-05
814-05
91-002
065-05'
91-002
91-001
179-35-«
11-341
:^91-069
91-069
91-069
91-063111-92
056-05
584-45
795-01
277-15
91-006
035-35
818-05-^
262-35'
91-006
91-069105-35
584-05'
91-105
-11-314
J
91-061
11-314
447-15
91-002 261-31'
220-15
087.91
220-15
Front
Parts
91-069110-45-^
13-253106-15-«=
91-701
329-15
^ ^
91-020
400-35
91-069471-35
1 91-004 006-05
ftg)/91-069
91-069
469-35^
11-314
946-15-9
470-35
91-069
450-91
PFAFF 467-6/1; -6/2
91
-069
91-069
452-45
^ n
11-105
083-15
91-100
061-15
91
069
543-91
91-069
467-15
460-11
91
91-069
-098
459-15
91-069
91-069
827-15
91-069
458-15
464-05
91-069
:o;
453-05
91-106
465-35
91-069
289-05
91-069
466-15
11-178166-35
456-05
91-069
457-05
11-106236-15-
99-069
11-130
91
-169121
11-317950-15
-91-069
13-250
11-105
707-01
91-000
91-107
230-1
-01A.j
079-92
436-05
-91-028
225-15
91-100107-15
91-169
91-169110-92
11-105
225-15
624-15
850-9
5-M
1.105
225-15
n-105
91-169111-92
11-130176-15
12-610170-45
91-169154-05
91-169118-15
91-700
91-169115-12
91-169116-05
605-15
91-069
-91-100108-15
91-169166-15
91-169105-91
005-91
225-15
239-15
91-169119-05
91-169114-91
660-5
91-169142-91
91-169117-45
11-105 087-15-C^
91-169113-1
14-650214-05
91-169155-12
11-105177-15
91-169145-91
91-169146-05
%-l
1-314
91-169109-04
91-169153-11
91-700
91-169149-15
-700
91-169151-05
12-610150-45
91-169150-05
91-700364-15
91-069
12-640150-55
(/
069
434-91
280-15
073-35
91-049
092-45
91
-054
295-91
868-15
324-05
91-701
364-15
91
12-640130-55
91
-069
-069
568-15
-100117-15
579-05
91
-049
91-169191-25
093-45/91
91-700
-054
303-01
687-15
11-105
083-15
(100 058]
11-105
087-15
(701 395)
11-105171-15
(100 002)
11-105177-15
(701 363)
11-105
225-15
(701
365)
11-106236-15
(100056)
11-130176-15
(100 018)
11-130
230-15
(100 220)
11-178166-15
(100 060)
11-178166-35
(100 060)
n-266171-35
(701 367)
n-314
169-15
(701 316)
11-314
220-15
(701
359)
11-314
280-15
(700 150)
11-314
946-15
(701
314)
11-317
950-15
(701
361)
11-341
277-15
(100 138)
12-305111-15
(69047)
12-510110-45
(80 145)
12-610150-45
(69 433)
12-610170-45
(66 043)
12-610
210-45
(28 626)
12-640130-55
(23 033)
12-640150-55
(20 565)
13-250
436-05
(101
827)
13-253106-15
(101
801)
14-215 016-01')
(69 545)
14-650
214-05
(69 082)
91-000
256-05
91-000
624-15
91-001
179-35
PFAFF 467-6/1 j -6/2
Fastening screw for No. 91-069459-15
Fastening screw for No. 91-069467-15
Fastening
screw
for
No.
91-069 584-45
Binding screw for Nos. 91-169126-12;
91-169 135-12; 91-169 155-12
Binding screw for Nos. 91-069102-12;
91-169110-92; 91-169111-92
Fastening screw for No. 91-069543-91
Binding
screw
for No. 91-169153-11
Fastening screw for No. 91-169005-91
End
screw
for
No.
91-169
135-12
Fastening screw for No. 91-069 466-15
Fastening screw for No. 91-069 106-35
Fastening screw for No. 91-009 035-35
Fastening
screw
for
Nos.
91-061 087-91;
91-069 033-05; 91-069 034-05;
91-069 049-05;
91-069105-35
Fastening screw for No. 91-169 146-05
Fastening
Fastening
screw
for
No.
screw
for No. 91-069 079-92
91-069469-35
Fastening screw for No. 91-069 584-45
Washer
Slip
Slip
for
washer
washer
No.
11-105
171-15
for No. 91-701 360-15
for No. 91-169151-05
Slip washer for Nos, 91-169119-05;
91-169154-05
Circlip for Nos. 91-069 005-04;
91-069
035-45
Slip
Slip
Hinge
washer
washer
for
No.
91-100 117-15
for
No.
91-169 113-11
pin for No. 91-069 660-15
Positioning pin for No. 91-069110-45
Needle
Ball
Tension
for
bearing
No.
91-169145-91
stud
for No. 91-169129-14
Fastening screw for Nos. 91-000 256-05;
91-107
850-92
Needle
set
screw
91-002
065-05
91-002261-31
91-002 262-35
91-004
006-05
91-006
584-05
91-006
813-15
91-006
814-05
91-006
818-05
91-009
035-35
91-020
400-35
91-028605-15
91-049
092-45
91-049
093-45
91-054
295-91
Tension
Nut
Tension
for
disc
No.
91-000 256-05
release
washer
Pressure spring for No. 91-069470-35
Tension spring
Thread
Thread
Tension
Thread
Thread
Washer
Vibrating
Vibrating
check
spring regulator
check
spring
release plunger
retainer
retainer
for No. 13-250 436-05
presser
presser
Lifting
presser foot, w/ binding screws
No.
91-700
foot
foot
868-15
(Subcl.
(Subcl.
(Subcl. -6/1)
91-054
303-01
Lifting presser foot
(Subcl. -6/2)
91-061 087-91
Thread
tension,
comolete.
of Nos.: 91-000 256-05;
91-000 624-15; 91-002065-05;
91-002 261-31; 91-002 262-35;
91-006584-05; 91-006813-15;
91-006 814-05; 91-006 818-05;
91-105
447-15
91-061
337-45
91-063 111-92
Take-up lever bushing (cemented)
Needle
No.
holder, w/
91-001
needle
179-35
91-069005-04') Take-up crank stud for Nos.
91-069 020-91; 91-069 040-01
91-069
019-91
Take-up lever, complete,
consisting of Nos. 12-510110-45;
12-610210-45; 91-069 005-04;
91-069020-91; 91-069 030-91;
91-069 033-05; 91-069 040-01;
91-069043-15; 91-069060-92;
91-701
360-15
91-069
020-91')
Take-up
No.
91-061
lever,
w/ take-up lever
337-45
91-069030-91') Take-up lever link
91-069033-05') Take-up lever link stud for
No.
91-069
030-91
91-069
034-05
91-069
035-45
91-069
036-05
91-069040-01') Needle
91-069
043-15
91-069045-45
91-069
049-05
91-069 056-05 Foam-plastic
91-069060-92') Needle
Bearing bushing for No.
Oil tube, 460 mm long,
for
No.
91-069 033-05
Oil
wick,
for
Washer for Nos.
91
Washer
91-069
Eccentric
screws
600 mm long,
No.
91-069
035-45
bar
connecting link
91-069
-069
040-01
(plastic) for Nos. 91-069040-01;
060-92
stud
for
No.
pad
for No. 91-069584-45
bar
connecting stud, w/ binding
No.
91-700
243-15
91-069
020-91;
91-069584-45
-6/1)
-6/2)
consistinn
set screw
bushing
033-05
') Will be exdianged for o replacement assembly. For repair, return take-up lever No.
•)
Willbeexchanged
91-169 125-91,
for a
complete.
replacement
assembly.
For
repoir,
return
vibrating
presser
91-069
lifting
019-91,
assembly
complete.
No,
PFAFF 467-6/1 j
91
-069062-45 Plug (plastic) for No. 91-069060-92
91-069 079-92
Presser
No.
11-317
bar
lifter,w/set
950-15
screw
91-069102-12 Lifter lever crank, w/ binding screws
No.
11-105
225-15
91-069105-35 Thread
guide
91-069106-35 Thread guide, upper
91-069110-45 Take-up lever
guard
91-069 324-05 Tension spring for No. 91-169113-11
91-069
434-91
Tension release lever, complete,
consisting of Nos. 12-640130-55;
91-069568-15; 91-069 579-05;
91-100117-15
91-069
450-91
Face cover bobbin winder, complete,
consisting of Nos.: 11-105083-15;
11-105087-15; 11-178166-35;
11-314946-15; 91-004 006-05;
91-020 400-35; 91-069 452-45;
91-069 453-05; 91-069 456-05;
91-069 457-05; 91-069 458-15;
91-069 459-15; 91-069 460-11;
91-069 464-05; 91-069 465-35;
91-069 466-15; 91-069 467-15;
91-069469-35; 91-069 470-35;
91-069 471-35; 91-069 543-91;
91-098 827-15; 91-100061-15;
91-106 289-05; 91-701 362-15
91-069452-45 Guide bushing for No. 91-069453-05
91-069453-05 Slide bushing for No. 91-069452-45
91-069
456-05
Bobbin
winder spindle
(left-hand thread)
91-069457-05 Driving spring for No. 91-069456-05
91-069
458-15
Friction
for
No.
washer (left-hand thread)
91-069
456-05
91-069459-15 Bobbin winder spindle driver
91-069
460-11
Bobbin winder engaging fork
for
No.
91-069 453-05
91-069464-05 Pressure spring for No. 91-069465-35
91-069465-35
Thread
retainer
stud
collar
91-069466-15 Bobbin winder disengaging finger
91-069467-15 Leaf spring for No. 91-069453-05
91-069
469-35
91-069470-35
Thread
Thread
retainer
retainer
stud
sleeve
91-069471-35 Regulating nut for No. 91-069469-35
91-069543-91 Face cover, w/
No.
91-069
568-15
13-253106-15
No.
91-069
Tension
release
Positioning pin
110-45
Take-up lever guard
lever
91-069579-05 Torsion spring for No. 91-069568-15
91-069
584-45
91-069637-35
91-069
660-15
91
-069
794-91
Needle
Thread
Lifting
bar
frame
guide, lower
lever connecting rod
Needle bar, complete,
consisting of Nos.: 91-063111-92;
91-069
795-01
91-069
795-01
Needle
bar
-6/2
91-098
91-100
827-15
061-15
Washer
Guide
for
screw
No.91-069
for
No.
464-05
91-069
453-05
91-100107-15 Spring rest screw for No. 91-169166-15
91-100108-15 Regulating screw for No. 91-169166-15
91-100117-15 Hinge screw for No. 91-069568-15
91-105447-15
91-106289-05 Bearing bushing for Nos.
Washer
91-069
for
456-05
No.
91-006
584-05
91-069
453-05;
91-107850-92 Set collar for No. 91-169109-04,
w/
set
screws
91-169
005-91
No.91-000
Bearing bracket for Nos. 91-169110-92;
91-169111-92,
No. 99-069
No.
91-169
w/
707-01
109-04
624-15
Needle bearing
Fulcrum
stud
(Supplied as a unit only)
91-169
082-91
Vibrating presser vibrating mechanism,
w/ presser
bar
assembly, complete,
consisting of Nos. 91-049 093-45;
105-91
91-054 303-01; 91-169
91-169145-91
complete;
complete;
91-700 687-15
(not ill.)
(Subci. -6/2)
91-169104-04
Fulcrum
stud
for
No.
91-169
128-15
(Orders should specify numbered of
dots:
1, 2 or 3)
presser
91-169105-91 Vibrating
vibrating mechanism,
complete,
consisting
91-107
91-169110-92; 91-169111-92;
91-169115-12; 91-169116-05;
of Nos. 12-610 170-45;
850-92;
91-169
005-91;
91-169117-45 ; 91-169118-15;
61-169119-05;
91-169109-04 Fulcrum
91-169111-92
stud
91-169154-05
for
Nos.
91-169110-92;
(Orders should specify number of dots:
1,2,3or
91-169110-92 Vibrating
4)
presser
driving crank,
w/ binding screws No. 11-105 225-15
91-169111-92 Vibrating presser driving lever,
w/binding
91-169113-11 Lifting
91-169114-91 Lifting lever,
screws No. 11-105225-15
lever
complete,
consisting of Nos. 12-640150-55;
13-250 436-05; 91-028 605-15;
91-069102-12;
91-069
660-15;
91-069 324-05;
91-169113-11
91-169115-12 Connecting link for Nos. 91-169111-92;
91-169 117-45,w/set
No.
91-700
91-169116-05
Fulcrum
91-169117-45 Vibrating
239-15
stud
presser
for
screw
No.
91-169115-12
bracket
91-169118-15 Connecting link for Nos. 91-169117-45;
91-169153-11
91-169119-05 Fulcrum
91-169117-45
91-169121-01 Lifting
stud
for
Nos.
crank
for No. 91-169113-11
91-169115-12;
PFAFF 467-6/1; -6/2
91-169125-91
Vibrating presser lifting assembly
(replacement assembly), complete,
consisting of Nos.: 11-178 166-15;
14-215016-01; 91-169104-04;
91-169 126-12; 91-169 128-15;
91-169129-14; 91-169135-12;
91-169144-05; 91-701 662-15;
99-069 713-01; 99-169 143-01
91-169126-12 Vibrating presser lifting shaft,
w/ binding screw No. 11-105 177-15
91-1691
28-15^)
Connecting link for Nos. 91-169126-12;
91-169129-14
91-169129-14^) Two-armed lever
91-169
135-12^)
91-169137-05
Presser bar lifting bracket, w/ binding
screw
No.
11-105177-15
Washer
for
No.
91-169126-12
91-169140-05 Oil pad (foam plastic)
for
No,
99-169143-01
91-169
142-91
Vibrating presser vibrating mechanism,
w/
presser
consisting of
91-054295-91; 91-169105-91
91-169145-91
bar
assembly, complete,
Nos.:
91-049 092-45;
complete;
complete;
91-700687-15 (Subcl. -6/1)
(ForSubcl. -6/2, see No. 91-169
91-169144-05
91-169145-91 Presser
Fulcrum
consisting of
stud
for
No.
bar
assembly, complete,
Nos.:
11-130176-15;
99-169143-01
12-610150-45; 91-169146-05;
91-169149-15; 91-169150-05;
91-169151-05; 91-169153-11;
91-169155-12; 91-700 073-35
91-169146-05 Bearing bushing for No. 91-169
91-169149-15 Vibrating presser lifting bar
91-169150-05
Roller
for
No.
91-169117-45
082-91)
153-11
91-169151-05
91-169153-11
91-169154-05
91-169155-12 Vibrating
Fulcrum
Presser
Eccentric
stud
bar
stud
presser
for
for
No.
91-169150-05
No.
91-169
lifting
118-15
member,
w/ binding screw No. 11-105177-15
91-169166-15 Presser
91-169191-25 Finger
bar
guard
leaf spring
91-700 073-35 Fastening screw for Nos. 91-054 295-91;
91-700 239-15
91-054 303-01;
Fastening
91-169191-25
screw
for
No.
91-169116-05
91-700243-15 Binding screw for No. 91-069060-92
91-700 335-35 Fastening screw for No. 91-069 637-35
91-700 364-15
Spring
for
No.
suspension
91-069
324-05
screw
91-700 687-15 Fastening screw for Nos. 91-049092-45;
91-049
093-45
91-700 868-15 Hinge screw for No. 91-054295-91
91-701 329-15 Fastening screw for No. 91-020400-35
91-701 360-15 Hinge screw for Nos. 91-069020-91;
91-069
030-91
91 -701
362-15
91-701 364-15
91-701
662-15
End
Hinge
Nut
screw
screw
for
for
No.
No.91-069
for
No.
91-169
033-05
91-169 113-11
144-05
99-069707-01 Needle bearing for No. 91-169126-12
99-069 707-01
99-069
713-01")
99-169143-01
Needle
(If
bearing
replacement
for No. 91-169005-91
is required
order
No. 91-169 005-91)
Needle bearing for No. 91-169128-15
Roller
for
No.
91-169144-05
') Will be exchanged for • replacement assembly. For repair, return vibrating presser liffinq assembly No.
91-169125-91,
complete.
n-330
085-15
1-069
717-04
13-010198-05 -91.169103-15
9
-169
99-069
713-01
11-174
088-35
04-04
PFAFF 467-6/1; -6/2
91-169102-91
9
-06974-9
91-069
785-01
11-317950:15
91-069
721-12-
91-069
99-069
718-05
91-169
722-01
302-91
91.-069
719-05
91-069
735-05
11-314
91-069
99-069
91-069
280-15
654-01
713-01
14-215
657-05
91-069650-45
-
91-069
016-01
91-069
651-12
11-317950-15
«p-91-069
91-069723-12
770-04
9
-069
730-05
91-069
11-314
91-700
691-15
066-45
91-069
11,-105225-15
I
733-12-
280-15'
14-C10
386-91
91-069
665-01
729-05
9.1-701
362-15
.91-069
730-05
-91-069771-15
-91-069
730-05
91-069732-15
91-069
633-91
13-052
256-15
91-069
046-05
91-169304-15
13-052
256-15
11-310478-15
13-115
91
91-069634-92
-069
91-069
901-05
635-35
-91-069103-15
-033
322-15
12-005
195-15
326-15
91-169171-15
91-069150-45
14-215
016-01
91-700335-15
91-100
055-15
12
II
Arm
Parts
10
14-018
14-680
644-91
070-15
91-700
\
11-330
\ \ \
288-15
952-15
91-069478-12
PFAFF 467-6/1; -6/2
91
-069
472-91
91-069
644-93/14-680
14-018
624-91
050-15
11-105
15-718
177-15
050-51
11-
91-169136-12
91-101
91-069132-31
11-130
11-314
91-701
280-15
378-15
756-05
d,
9 -6990-91
224-15
91-101
1^14-215
91-069
758-15
013-01
468-15
11-178
289-15
91-069
745-92
<S^91-069135-05
)W/
11-205
939-35
9
-7005
91-069
0-
643-04
91
5
-069160-04
91
-069
120-31
91-069427-15-
93-513
91-069
91-069
91.0^9
426-92
1-069
523-05"^'91-701
415-11
91-069419-15
11-186
418-12
11-105
423-01
362-15
934-15
225-15
91-069138-15
91-069137-35-
1*^91-069139-91
91-069
131-91
16-046
030-01-4.^
12-024172-15
91-069127-05
12-024171-15
91-105
91-701
0
91-069
339-91
12-024171-15
16-049
020-01
442-15
370-15
91-069431-11
.9^
37g_^g
'11-314280-15
m
11
PFAFF 467-6/1 j -6/2
11-105177-15
(701
363)
11-105
225-15
(701
365)
11-130
224-15
(100 127)
n-174
088-35
(100 188)
11-178
289-15
(100 035)
11-186 934-15^)
(701 393)
11-205
939-35
(100 005)
11-310
478-15
(100 141)
11-314280-15
(700 150)
11-317950-15
(701
361)
11-330
085-15
(100 185)
11-330
952-15
(100091)
12-005195-15
(701
713)
12-024
171-15
(101 501)
12-024172-15
(101
500)
13-010198-05
(101
800)
13-033
322-15
(1 975)
13-052
256-15
(101 784)
13-115
901-05
(69636)
14-010
665-01
(69 752)
14-018
624-91
(69 Oil)
14-018
644-91
(69 006)
14-215
013-01
(69 479)
14-215
016-01
(69 545)
14-680
050-15
(69 039)
14-680
070-15
(69 038)
15-718
050-51
(69 360)
16-046
030-01
(69126)
16-049
020-01
(69281)
Binding screw for No. 91-069472-91
Binding screw for Nos. 91-069 418-12;
91-069
723-12
Binding screw for No. 91-169136-12
Fostening screw for No. 91-069
End
screw
for
No.
91-069
472-91
Hinge screw for No. 91-069 419-15
Fastening screw for No. 91-069 138-15
Stop
screw
91-169
Fastening
91-069 654-01;
91-069
for Nos. 91-069 326-15;
304-15
screw
for Nos. 91-069431-11;
91-069733-12;
745-92
Fastening screw for Nos. 91-069 657-05;
91-069
721
-12
Fastening
screw
for No. 91-069 717-04
Fastening screw for No. 91-069 478-12
and
for
top
feed lifting eccentric
Nut
for
No.
11-310478-15
Nut for Nos. 16-046030-01;.
91-069127-05
Nut (left-hand thread}
for
No,
91-069127-05
Positioning pin for No. 91-069714-91
Driving pin for No. 91-169 302-91
Stop
pin for
No.
91-069 103-15
positioning pin for Nos. 91-069 326-15;
91-169
304-15
Rivet
for
No.
91-069
635-35
Ball
bearing
91-069
Ball bearing, rear, for No.
for Nos. 91-069 732-15;
733-12
91-069
w/ circlip No. 14-680050-15
Ball
bearing,
front, for No. 91-069
w/ circlip No. 14-680070-15
Needle
Needle
bearing
bearing
for No. 91-169
for No. 91-169 171-15
Circlip for No. 14-018 624-91
Circlip for No. 14-018 644-91
Ball
bearing
Connecting
for
No.
No.
12-024171-15
Connecting
for
No.
sealer
rod
rod
joint
joint
91-069 131-91,
91-069131-91
for No. 91-069472-91
w/nut
91-089 046-05 Torsion spring for No. 91-169
785-01
and
472-91,
190-91
302-91
472-91
91-069066-45 Plug for No. 91-069
785-01
91-069 095-04') Fulcrum stud for No. 91-069771-15
91-069103-15
Vertical
shaft
91-069120-31 Feed reversing lever
91-069127-05 Ball joint connection No. 91-069131-91
91-069131-91 Ball joint connection, complete,
consistingofNos.
12-024171-15;
12-024172-15; 16-046 030-01;
16-049 020-01; 91-069127-05
91-069132-31 Stitch length locking slide
91-069135-05 Pressure spring for No. 91-069132-31
91-069137-35 Feed
regulator
dial
91-069138-15 Stitch length cam
91-069 139-91
91-069150-45
Feed
regulator
dial,
consistingofNos.
91-069137-35;
Arm
cover,
91-069138-15
rear
complete,
11-205 939-35;
91-069160-04 Driving belt, w/ flat cleats,
for
U. S.,
Canada,
Great
Britain
and
Belgium only
(Orders should specify number of
marks: 1, 2 or
3}
91-069 326-15 Collar {1stversion) for No. 91-069103-15
(Cannot be
replacedbycollar
No. 91-169 304-15)
91-069 339-91
regulator,
complete,
Feed
consistingofNos. 11-314280-15;
91-069131-91
91-701
91-069 386-91 Top
feed
378-15
complete;
driving
91-069 431-11;
mechanism
(replacement assembly), complete,
consisting of Nos. 14-010 665-01;
91-069 095-04; 91-069 650-45;
91-069 723-12; 91-069 729-05;
91-069 730-05; 91-069 732-15;
91-069 733-12; 91-069 770-04;
91-069 771-15; 91-701 362-15;
99-069
713-01
(On Pfaff 465 top
and
needle feed
driving mechanism)
91-069
415-11®)
Differential feed indicator for
complete,
top
feed,
consisting of Nos. 11-186 934-15;
91-069 418-12; 91-069 419-15;
91-069 423-01; 93-513 523-05
91-069
418-12®)
91-069
419-15®)
91-069
423-01®)
91-069
426-92®)
91-069
427-15®)
91-069
431-11
91-069
468-15
91-069472-91 Arm shaft,w/crank
91-069 478-12
91-069 633-91 Top
Crank for No. 91-069415-11,
w/
set
screw
No.
11-105
225-15
Connection rod for No. 91-069
Pointer
actuating
lever
Differential feed scale, w/
set
screw
No.
91-701
362-15
Pointer for No. 91-069 426-92
Feed
regulator
Fulcrum
screw
Set
No.
stud
for
No.
11-105177-15
collar,w/set
11-330
952-15
cover,
complete,
No.
91-169136-12
and
screws
binding
415-11
consistingofNos. 13-115 901-05;
91-069
634-92;
91-069
635-35
') Will be exchanged for o replacement assembly. For repoir, return top-feed driving mechanism No. 91-049 384-91,
complete.
«)
OmittedonPfaff
445.
13
PFAFF467-6/1j -6/2
Thread
cover
guide
91-069634-92 Top
91-069 635-35
91-069643-04 Driving belt, w/ flat cleats,
not
for
U. S.,
and
Belgium
Canada,
Great
Britain
(Orders should specify number of
marks:
1, 2or3)
91-069644-93 Driving belt sprocket, upper, w/
set
screws
No.
91-700
510-15
(Orders should specify number
of
marks:
1, 2or3)
91-069 650-45^)
Crank
for No. 91-069 386-91
91-069651-12 Top feed regulating crank
(On Pfaff 465 doubling as needle feed
regulating crank), w/
No.
11-317
950-15
Set
screw
No. 91-700 691-15 Binding screw
91-069 654-01 Bearing bushing for No. 91-069 650-45
91-069657-05
91-069714-91 Vibrating
Fulcrum
stud
presser
for
No.
91-069
vibrating
651-12
shaft
(On Pfaff 465 doubling as needle
frame
shaft), w/
bar
No. 13-010 198-05 Positioning pin
No.
91-069
717-04
91-069 716-15
Fulcrum
stud
(Orders should specify number of
for
Vibrating
No.
vibrating
shaft
(On Pfaff 465
lingOSneedle
frame
shaft
91-169103-15
presser
crank
doub
bar
crank)
dots:
1, 2or3)
91-069718-05 Bearing bushing for No. 91-069 714-91
91-069
719-05
91-069721-12
Washer
Set
collar,
set
screws
for
for
No.
No.
91-069
No.
91-069714-91, w/
11-317
718-05
950-15
91-069723-12^) Vibrating presser vibrating shaft crank
(On Pfaff 465 doubling as
frame
binding
w/
91-069 729-05')
91-069730-05
Connecting
91-069
Washer
91-069
91-069 732-15') Driving
(On Pfaff 465 doubling as
shaft
crank),
screw
No. 11-105 225-15
link for Nos. 91-069 723-12;
771-15
for Nos. 91-069732-15;
771-15
eccentric
connection
needle
needle
bar
feed
driving connection)
91-069733-12 Top feed driving eccentric
(On Pfaff 465 doubling as needle
91-069 735-05
91-069 745-92
vibrator
No.
Bearing
Balance
No.11-314
No.
eccentric), w/ set screw
11-314280-15
bushing
wheel,
91-701
for No. 91-069 650-45
w/
280-15
378-15
Set
Set
screw
screw
91-069770-04') Fulcrum stud for Nos. 91-069 729-05;
91-069
732-15
91-069771-15'] Top feed rocker arm
91-069
785-01
91-100 055-15
Oil
reservoir
Fastening
screw
for No. 91-069150-45
91-101
756-05
91-101
758-15
91-105
442-15
91-169102-91
Guide
Stop
pin
Friction
Vibrating
pin for
for
washer
presser
fOn Pfaff 465 doubling as
frame shaft), w/ connection, complete,
consisting
91-069
714-91;
91-169103-15;
99-069
713-01
91-169103-15
Vibrating
connection
presser
(Supplied only as an assembly
incorporating
No. 99-069 713-01, fulcrum stud
No.
91-069
No. 91-169104-04)
91-169104-04
Fulcrum
stud
(Orders should specify number of
dots: 1, 2 or 3)
91-169136-12
91-169171-15
Vibrating presser lifting shaft crank,
w/
binding
Connecting
(see p. Ill); 91-069 651-12
91-169190-91
Vibrating presser lifting eccentric
assembly,
No.
11-330952-15
No.
14-215
No.
91-069
No.
91-069
No.
91-169
91-169
302-91
Knee lifter vertical shaft, complete,
consisting of Nos. 13-033 322-15;
13-052 256-15; 91-069 046-05;
91-069
103-15;
91-169
304-15
Collar
for
(2nd version)
No.
91-069103-15
(Cannot be
No. 91-069 326-15)
91-700
91-700
91-700
288-15
335-15
510-15
End
screw
Fastening
Fastening
(M6x0.75;
for
No.
Obsolete
91-069
version=No.
fastening screw (M6; 6 mm long)
91-700
691-15
91-701
362-15
91-701
370-15
91-701
378-15
93-513 523-05^)
99-069 713-01')
99-069
713-01
Binding screw for No. 91-069651-12
Fastening
91-069
770-04
Hinge
screw
Fastening
91-069
745-92
Rivet
for
No.
Needle
91-069
Needle
bearing
732-15;
bearing
(Supplied only as an assembly
incorporation
No.
91-169103-15,
No.
91-169104-04
No.
91-069 717-04)
99-069722-01
91-169120-45 Arm (not ill.)
Needle
bearing
No.
91-069 132-31
No. 91-069 135-05
for
No.
91-069
vibrating
shaft
needle
of Nos. 11-330 085-15;
91-069
717-04;
91-169104-04;
vibrating
needle
717-04
and
for
No.
screw
No. 11-130 224-15
rod
for
shaft
bearing
fulcrum
91-169103-15
Nos.
91-069 417-05
w/
Lifting eccentric set
91-169
replaced
No.
for
screw
Needle
Fulcrum
Set
collar
Vibrating
lifting
304-15
by collar
91-069
No.
91-069 633-91
bearing
stud
presser
shaft
472-91
013-01
468-15
478-12
136-12
for
screw
screw
7 mm long)
644-93
screw
for Nos. 91-069 426-92;
for
No.
screw
for Nos. 91-069 431-11;
91-069
11-317
91-069 139-91
419-15
for Nos. 91-069729-05;
91-069
771-15
for No. 91-169103-15
connection
fulcrum
and
stud
fulcrum
for No. 91-069714-91
139-91
bar
stud
crank
278-15
stud
14
') Will be exchanged for a replacement assembly. For repair, return fop-feed driving mechanismNo.
complete.
')
Omitted
on Pfaff 465.
91-069
386-91,
Bed
Plate
Parts
Ill
91-069
91-700
785-15
91-169175-04
91-069
366-05
PFAFF
91-701
416-05
467-6/1;
368-15
91-069
-6/2
375-15
12-640150-55
12-624
1-105
91-069
310-45
225-15
417-05
91-069
91-700
785-15
91-169172-05
365-12
91-069
9
-069
293-05
15-718
060-51
91-069 283-05 11-314 280-15
91-069
260-91
14-218190-01 11-314 220-15
91-069
12-510110-45
91-069
91-069
244-91
ni-105 177-15^ \
91-701
360-15
11-317
\
278-15
91-069
12-610150-45-O
316-91
91-069
12-024 171-15
91-069
305-90
235-01
11-314
91-701
241-05
284-91
314-15
280-15
362-15
12-624
310-45
«
91-169176.91
11-105
91-70
372-
12-627
91-100092-15 A ft Q I
/91-169177-01
225-15
n-105
177-15
91-069
547-11
11-105
91
91
380-45
14-010
660-01
91-069
12.024191-45
12-510171-45
225-15
m
-069
313-05
-069
238-91
91
-069
208-15
91-069
292-45
f
/12-305
91-069
9
-069
91.059
645-04
11-220 172-15
91-169132-15
171-15
553-05
277-04
647-12
14-016130-01
91-069
91-069
91-069
420-12
646-04
n-105
12-624
768-05
310-45
91-069
91
225-15
-069
91-700
91-069
642-05
648-93
785-15
276-12
91-069
555-05
11-105
225-15
91-069296-12
11-330
952-15
91-069
294-12
91-069
289-05
91-069
385-13
11-314220-15
91-069
n-105177.15
91-069
91-069297-91
91-069
11-105174-15
11-330
14-218190-01
91-069
758-91
91-069
91-069
554-92
062-45
0
243-12
287-05
952-15
342-05
91-069
91-169059-15 91-169058-15
91-069
300-45
11-105177-15
301-15
91-069299-05
91-069
302-05
17
91-069
759-91
91-069
91-000
11-341
233-91
91-069 263-91
91-000 678-05v
452-15
91-100
240-15
277-15
91-069
225-05
12-660
PFAFF 467-6/1; -6/2
91
-000
91-000
785-15\91
678-05
91
-069
91-069 264-05
232-01
-009
13-050154-05
14-018572-01 91-069 223-05
420-45
91
-009
069-05
11-330
91-069220-05
1-069
14-650
074-05
226-05
214-05
952-15
91-069
91
-009
076-91
91-009
048-01
91-002134-05
91-000249-15
91-009
91-069
222-12
91
-009
91-000
91-000
91-009
224-05
075-05
390-15
250-15
026-05
033-05
91-069
800-05
91-069
15-120112-05
91-069
91-069
91-069
15-128
91-069
91-069
319-91
270-05
272-15
91
-000
407-15
15-128
91-069
259-05
010-75
251-15-Cl;^;^jfiJ^^T14-650275-05
257-05
^.>^9
^
91-701
91-069
250-91
I f.
91-069318-91
362-15
15-120112-05
11-314
060-75
254-05
^
280-15
91-069246-05
91-069
362-15
91
-000173-35
^1 05
225-15
252-05
91-069253-05
91-069
964-15
11-105171-15
91-069
12-610220-45
91-069 083-05
097-05
91-048
91-048517-04
91-026
095-04
076-04
9
-047
373-04
91-100
91-069
91
076-15
291-35-i-
-004181-05
91-069
290-91
18
15
11-105171-15
(100 002)
11-105174-15
(701
099)
11-105177-15
(701
363}
11-105 225-15^)
(701 365)
11-105
225-15
(701 365)
11-220172-153)
(701 357)
11-314
220-15
(701 359)
11-314
280-15
(700
150)
11-317
278-15
(701
371)
11-330
952-15
(100 091)
11-341
277-15
(100 138)
12-024171-15
(101
501)
12-024191-45')
(701
635)
12-305171-15')
(50 740)
12-510110-45
(80 145)
12-510171-45')
(69402)
12-610150-45')
(69 433)
12-610
220-45
(28620)
12-624 310-45')
(69 376)
12-624
310-45
(69 376)
12-627
380-45
(69 207)
12-640150-55')
(20 565)
12-660
420-45
(69 230)
13-050154-05
(101 752)
14-010
660-01
(69 209)
14-016130-01
(69 649)
14-018
572-01
(69 229)
14-218190-01
(69 216)
PFAFF 467-6/1; -6/2
Fastening screw for No. 91-069964-15
Binding screw for No. 91-069554-92
Binding screw for Nos. 91-069243-12;
91-069244-91; 91-069
547-11
and
fastening screw for Nos. 91-069 301-15;
91-169
059-15
Binding screw for No. 91-069 417-05
Binding
91-069 296-12; 91-069 420-12;
91-069
fastening
End
547-11
screw
screw
for Nos. 91-069 284-91;
and
screw
for No. 91-069 097-05
for
No.
91-169
132-15
Fastening screw for Nos. 91-069 205-12;
91-069
215-13;
91-069
385-13
Fastening screw for Nos. 91-069 235-01;
91-069 251-15; 91-069 305-90;
91
-069
316-91
Fastening
Fastening
91-069
Fastening
Nut
Nut
Washer
External-teeth
for
External-teeth
for
294-12;
for
No.
for
No.
for
No.
91-701
No.
12-024191-45
screw
for No. 91-069241-05
screw
for Nos. 91-069 222-12;
91-069
554-92
screw
for
No. 91-069 233-91
91-069
284-91
91-169172-05
No.
12-024 191-45
lock
washer
360-15
lock
washer
Circlip for Nos. 91-100 092-15;
91-701
368-15
Circlip for No. 91-069 253-05
Circlip for
No.
91-169175-04
Circlip for No. 91-069277-04
Circlip for No. 91-069205-12
Slip
washer
91-169
for Nos. 91-069420-12;
177-01
Circlip for No. 91-069225-05
Positioning pin
91
-069
226-05
Ball
bearing
91
-069
208-15
Ball
bearing
Ball
bearing
Needle
(For
bearing
replacement
No. 91-069
Needle
(For
replacement
No. 91-069 758-91
for
for
for No. 91-069
236-91
bearing
for
Nos. 91-069 223-05;
Nos. 91-069 205-12;
No.
91-069 646-04
233-91
for
No.
91-069 217-05
purposes
order
complete)
for No. 91-069 342-05
purposes
order
complete)
14-650
214-05
(69 082)
14-650
275-05
(69 844)
15-120112-05
(69 803)
15-128
010-75
(69 248)
15-128
060-75
(69 249)
15-718
060-51
(69 317)
91-000
173-35
91-000
249-15
91-000
250-15
91-000
390-15
91-000
407-15
91-000
452-15
91-000
678-05
91-000
785-15
91-002134-05
91-004181-05
91-009
026-05
91-009
033-05
91-009
048-01
91-009
069-05
91-009
074-05
91-009
075-05
91-009
076-91
91-026
095-04
91-047
373-04
91-048
076-04
91-048
517-04
91-069
052-45
91-069
083-05
91-069
097-05
91-069
205-12
91-069
208-15^;
91-069
215-13
Ball
for
No.
91-069
232-01
Ball
for
No.
91-069
254-05
Sealer
ring for Nos. 14-650275-05;
91-069
272-15
Gasket
Gasket
Ball
for
for
bearing
No.
No.
sealer
91-069
259-05
91-069
252-05
for No. 91-069 283-05
Fastening screw for Nos. 91-048 076-04;
91-048
517-04
Stop
screw
for
No.
91-009 048-01
Regulating screw for No. 91-009 026-05
Fastening screw for No. 91-009 026-05
Fastening screw for Nos. 91-026 095-04;
91-047
373-04
Fastening
for
Fastening
91-069
Fastening screw for No. 91-069
Pressure
Bed slide spring for No. 91-069
No.
91-069
264-05
spring
screw,
5.7 mm
263-91
screw
for Nos. 91-009 069-05;
for
No. 91-009 048-01
long,
263-91
290-91
Tension spring for No. 91-009076-91
Bobbin
Bobbin
case
latch
slide
Hook gib
Bobbin
Bobbin
Bobbin
case
case
case
base
cap
cap,
complete,
consistingofNos. 91-000 249-15;
91-000
250-15;
91-000390-15;
91-002 134-05; 91-009 026-05;
91-009 048-01; 91-009 075-05
Feed
dog,
sawtooth
cut
(Subcl. -6/1)
Feed
dog,
sawtooth
cut
(Subcl. -6/2)
Needle
plate
for
No. 91-047 373-04
(Subcl. -6/2)
Needle
plate
for No. 91-026 095-04
(Subcl. -6/1)
Plug (plastic), 4 mm dia.,
for
No.
91-069
240-05
Oil wick, 30 mm
for
No.
91-069
Bobbin
Feed
No.
case
driving
11-314220-15
Feed driving eccentric
Bobbin
No.
No.
for
No.
11-314
(For
replacement
91-069 236-91
case
91-069 236-91,w/set
long,
253-05
position finger
eccentric,w/set
crank
lever
eccentric
220-15
purposes
complete)
screws
screws
order
III
') Will be exchanged for • replacement ossembly. For repoir, return feed driving mechanism No. 91-069 238-91,
complete.
')
OmittedonPfaff465.
19
Ill
PFAFF 467-6/1; -6/2
91-069 217-05
Bobbin
case
lever
No.
91-069
eccentric
236-91
(For replacement purposes,
crank
order
No. 91-069236-91,complete)
91-069220-05
Hook
shaft
for
No.
91-069232-01
(For replacement purposes order
No. 91-069232-01, complete)
91-069222-12 Set collar for No. 91-069220-05,
w/
set
screws
No.
11-330
952-15
91-069
223-05
Centrifugal switch,fixed section,
for
No.
91-069
220-05
91-069224-05 Thrust pin for Nos. 91-069 232-01;
91-069
257-05
91-069225-05 Hook shaft bushing for No. 91-069
91-069226-05 Centrifugal switch, sliding section,
for
No.
91-069
220-05
91-069 232-01
Hook
shaft,w/centrifugal
switch,
complete,
consisting of Nos. 13-050 154-05;
14-650 214-05; 91-069 220-05;
91-069 223-05; 91-069 226-05
91-069 233-91
Hook
shaft
bushing,
complete,
consisting of Nos. 12-660 420-45;
91-069
91-069
235-01
236-91
14-018572-01;
91-069225-05; 91-069
Bearing bushing, w/
(Orders should specify
on driving
Bobbin
91-069
222-12;
232-01,
needle
number
shaft
No. 91-069 645-04)
case
lever driving connection,
complete
bearing
of dots
complete,
consisting of Nos. 14-218190-01;
91-069
215-13;
91-069
217-05
91-069238-91 Feed driving mechanism, complete,
(replacement assembly)
consisting of Nos. 12-627 380-45;
14-010
660-01;
91-069
205-12;
91-069 208-15; 91-069 284-91;
91-069 313-05; 91-069 314-15;
91-069
547-11
91-069 239-12
91-069
240-05
91-069 241-05 Bobbin
91-069243-12 Bobbin
Set
w/
set
Bobbin
collar
screws
case
case
case
for
No.
91-069 240-05,
No.
91-701
lever
shaft
lever
shaft
lever,
362-15
bushing
w/ binding screw No. 11-105177-15
91-069 244-91 Bobbin
bearing
No.
case
lever
and
11-105 177-15
binding screw
shaft
crank,
91-069246-05 Oil tube, 180 mm long,
for
Nos.
91-069 250-91; 91-069 318-91
91-069 250-91 Oil
shut-off
valve,
complete,
consisting of Nos. 14-650 275-05;
15-120112-05;
15-128
060-75;
15-128
91-069
010-75;
251-15;
91-069 252-05; 91-069 254-05;
91-069 257-05; 91-069 259-05
91-069251-15
Valve
housing
for No. 91-069250-91
91-069252-05 Nipple for Nos. 91-069251-15;
91-069
253-05
91-069 253-05
Oil
tube,
for
Nos.
91-069
265 mm
91-069
785-01
long,
250-91;
(see p.
II)
91-069 254-05 Pressure spring for No. 14-650275-05
91
-069
257-05
91-069259-05
Valve
stem
for
Nipple
for Nos. 91-069246-05;
91-069
251-15
No.
14-650
275-05
for
233-91
w/ ball
91
-069
260-91
Bobbin
case opener driving mechanism,
complete,
consisting of Nos. 12-510110-45;
91-069
236-91
91-701
91-069 263-91 Hook,
No.
No.91-000
91-000
complete; 91-069244-91;
360-15
w/
452-15
Set
678-05
Set
screw
screw
Nos. 91-009 069-05;
91
No.
91-000
785-15
Set
-069
screw
No. 91-009069-05 Hook gib
91-069
264-05
91-069
270-05
91-069
272-15
91-069275-05
91-069276-12
91-069 277-04')
91-069
283-05
91-069284-91')
91-069
287-05
91-069
289-05
91-069
290-91
91-069
291-35
91-069
292-45
91-069293-05
91-069
294-12
91-069
296-12
No.91-069
No.
Thread pull-off
Oil flow regulating spindle
for
Thrust screw for Nos. 91-069 270-05;
91-069
Torsion spring for No. 91-069 277-04
Set
91-069 277-04,
w/
Drop feed regulating
Feed
Feed
No.
No.
Hinge stud for Nos. 91-069 294-12;
91-069
Hinge stud for Nos. 91-069 294-12;
91-069
Bed slide, complete,
consisting of Nos. 91-004181-05;
91-069 291-35; 91-100076-15
Bed
Plug, (plastic), 17 mm dia., for bedplate
Feed rock shaft bushing
for
Feed
Feed rock
264-05
91-100
Thread pull-off flange
240-15
Set
screw
flange
No.
91-069
318-91
319-91
collar
for Nos. 91-069 275-05;
set
screws
No.
91-700785-15
shaft
rock
shaft
for
No.
rock
shaft
crank,
11-105 225-15 Binding
12-024171-15
296-12
554-92
slide
No.
91-069
bar,w/set
shaft
Nut
283-05
screw
crank, front,
rear,
w/ binding screw No. 11-105225-15
91-069
297-91
Feed lifting mechanism, complete,
consisting of Nos.91-069287-05;
91-069
289-05;
91-069
294-12;
91-069 296-12; 91-069 554-92;
91-069
91-069
91-069
91-069
91-069
299-05
300-45
301-15
302-05
305-90
91-069 758-91,
Oil
pad
Gasket
Oil
reservoir
Oil
pad
Spur
gear
complete
(foam-plastic)
(cork) for No. 91-069301-15
cover
(foam-plastic)
assembly,
w/
No. 11-314280-15 Set screw for large
spur
372-15
Set
screw
spur
for Nos. 91-069 208-15;
91-069 313-05')
91-069
314-15^)
No.
91-701
Hinqe
stud
91-069 314-15; 91-069 547-11
Connecting crank for No. 91-069
91-069316-91 Feed rock shaft, complete,
consisting of
91-069 283-05; 91-069 293-05
Nos.
15-718 060-51;
for
264-05
91-069
w/
screw
No.
11-330952-15
gear
for
gear
316-91
small
284-91
20
') Will be
complete.
') Orders should specify number of dots on part.
exchanged
for a replacement
assembly.
Far repair, return feed driving
medionism
Na.
91-069
238-91,
PFAFF 467-6/1; -6/2
91
-069
318-91
Oil flow regulator
block,
complete,
consisting of Nos. 15-120112-05;
91-069 270-05; 91-069 272-15;
91-069
319-91
91-069 319-91 Oil flow
regulator
block
for No. 91-069 318-91,
w/
set
screw
No.
91-701
362-15
91-069 342-05 Feed lifting eccentric
for
No.
91-069
(For
replacement
order
No. 91-069 758-91, complete)
crank
758-91
purposes,
91-069 365-12') Set collar for Nos. 91-069 366-05;
91-169 175-04,w/set
No.
91-700
785-15
91-069366-05') Torsion spring for No. 91-169
screws
176-91
91-069375-15') Connecting link for Nos. 91-069420-12;
91-169177-01
91-069 385-13 Feed lifting eccentric
for No. 91-069 758-91,w/set
No.
11-314
220-15
(For
replacement
purposes
screws
order
No. 91-069 758-91, complete)
91-069416-05') Retaining spring for Nos. 91-100092-15;
91-701
368-15
91-069
417-05'}
Differential feed regulating crank,
for top feed
91-069 420-12 Drop feed regulating
rear,
w/
shaft
crank,
binding screw No. 11-105 225-15
91-069 547-11 Drop feed regulating
shaft
crank,
assembly, w/
No. 11-105177-15 Binding screw
No. 11-105 225-15 Binding screw
91-069553-05 Bearing bushing, front,
for Nos. 91-069 277-04; 91-169175-04
91-069 554-92 Feed lifting crank joint
for No. 91-069289-05, w/
No. 11-105 174-15 Binding screw
No.11-330952-15
Set
screw
91-069555-05 Oil wick, 65 mm long,
for
Nos.
91-069 287-05; 91-069 289-05
91-069
642-05
91-069 645-04') Driving
Friction
washer
shaft
for
No.
91-069
646-04
91-069 646-04 Driving belt sprocket, lower,
for
No.
91-069
648-93
(Orders should specify number of
dots:
1, 2 or 3)
Set
collar
No.
91-069647-12
No.
91-100242-15
91
-700
No.
91-069646-04, w/
Set screw, pointed
510-15
Set screw, blunt
91-069 648-93 Driving belt sprocket, lower, complete,
consisting of Nos. 14-016130-01;
91-069 642-05; 91-069 646-04;
91-069
647-12
(Orders should specify number of dots:
1, 2 or 3)
91-069 758-91 Feed lifting eccentric crank, complete,
consisting of
91-069342-05;
91-069 759-91 Hook, w/
Nos.
bobbin
14-218190-01;
91-069
385-13
case, complete,
consisting of Nos. 91-009 074-05;
91-009 076-91
complete;
91-069 263-91
91-069768-05 Bearing bushing, rear,
for Nos. 91-069 277-04; 91-169175-04
91-069800-05 Oil
91-069
retainer
759-91
for Nos. 91-069 233-91;
91-069964-15 Clip for No. 91-069 253-05
91-100 076-15
Fastening
screw
for No. 91-004181-05
91-100092-15') Top feed regulating screw
91-100 240-15
(concave
Fastening
for
No.
surface)
screw,
91-069
4 mm
263-91
long,
91-100242-15 Fastening screw, pointed
(M6x0.75; 8 mm long)
for
No.
91-069
Obsolete
Fastening
647-12
version=No.
screw
91-701
378-15
(M6; 8 mm long)
91-169 058-15 Bedplate leg
91-169 059-15 Bedplate
91-169132-15')
Washer
(see p.
support
for No. 91-169171-15
II)
91-169172-05') Fulcrum stud for Nos. 91-069 417-05;
91-169171-15 (see p.
91-169175-04')') Top feed regulating
II)
shaft
91-169176-91') Differential top feed regulator,
complete,
consistingofNos. 11-105 225-15;
12-024191-45; 12-305171-15;
12-510171-45; 12-610150-45;
91-069 416-05; 91-069 417-05;
91-100 092-15; 91-169 172-05;
91-169177-01;
91-169177-01') Regulating screw
91-700 510-15
Fastening
91-701 368-15
screw,
bracket
blunt
(M6X0.75; 7 mm long)
for
No.
91-069
Obsolete
Fastening
647-12
version=No.
screw
11-317
281-15
(M6; 8 mm long)
91-700785-15 Fastening screw for Nos. 91-069276-12;
91-069
365-12
91-701 360-15
Hinge
screw
for
No.
91-069244-91
91-701362-15 Fastening screw for Nos. 91-069 239-12;
91-069 318-91; 91-069 319-91
91-701 368-15')
Top feed stroke limiting screw
(convex surface)
91-701 372-15
Fastening
screw
for
No. 91-069 305-90
91-069201-45 Bedplate (not ill.)
11-130 566-15 Fastening screw, 77 mm long,
(701
380)
for
No.
91-069
201-45
(not. ill.)
11-133538-15 Fastening screw, 33 mm long,
(100
081)
11-133 544-15 Fastening screw, 38 mm long,
(100
179)
for
No.
91-069
201-45
(not
ill)
for No. 91-069 201-45 (not ill.)
13-060400-05 Positioning pin for No. 91-069 201-45
(101
824)
(not ill.)
III
']
Orders
should specify number of dots on port.
)
Omitted
on Pfoff 465.
21
V
Supplementary
Ports
PFAFF
IV
91-046
598-91
91-046
566-21
11-470364-25
91-029
91
-029
840-91
571-25
467-6
91-069167-45
11-105
222-15
11-105
^
222-15
91-000
153-15'
91-046
694-05
91-000
11-470355-25
^ /
273-15
•91-035461-92 93-513 759-60
91-029
-91-046
V-91-029
571-25
91-026110-25
91-046
570-92
91-026179-45
960-92
601-05
91-069
91-701
585-35
515-35
91-069172-15
16-414
91-029
139-55
007-91
91
-069
91-029
91
742-35
480-91
-029
11-106257-5
946-91
24
91-025
911-21
91-000112-25
11-460109-15
91-069
306-45
13-070268-15-
12-640
090-15
^
91-027
91-027286-15
91
91-027
285-05
-029
692-45
13-052256-05
297-05
91-027281-91
91-027296-15
91
-027
^91-069
91-027
91-700
91
13-063313-15
91-027
288-15
328-1
289-15
785-15
-027
291-45
294-92
11-084356-15
91-069
11-084356-15
335-45
11-084
356-15
(100014)
11-105
222-15
(701
385)
11-106257-15
11-460109-15
(1435)
11-470
355-25
(1 417}
11-470
364-25
(1426)
12-640
090-15
(53 155)
13-052
256-05
(101
784)
13-063
313-15
(101 753)
13-070268-15
(101 759)
16-414139-55
(98 248)
91-000112-25
91-000153-15
91-000
273-15
91-025
911-21
91-026110-25
91-026179-45
91-027
281-91
91-027
285-05
91-027
286-15
91-027
288-15
91-027
289-15
Fastening screw for Nos. 91-027288-15;
91-027 289-15; 91-069 335-45
Fastening screw for Nos. 91-069167-45;
91-069170-45
Fastening screw for Nos. 91-069167-45;
91-069170-45
Wood
screw
for
No.
91-069
306-45
Wood
screw
for
No.91-046
Wood
screw
for
No.
Slip
washer
Guide
Stop
for No. 91-027 297-05
pin for No. 91-027 296-15
pin for No. 91-027 291-45
Hinge pin for No. 91-069
V-belt
Fastening screw for No. 91-025
91-029
598-91
840-91
328-11
911-21
Fastening screw for No. 91-035 461-92
Fastening screw for No. 91-046 570-92
Edge
guide
Spool
pin
Spool
disc
Knee lifter,
complete,
consisting of Nos. 11-084 356-15;
12-640090-15;
13-063 313-15; 13-070 268-15;
91-027
285-05;
91-027 288-15; 91-027 289-15;
91-027 291-45; 91-027 294-92;
91-027
296-15;
91-069 328-11; 91-069 335-45
Pressure
Set
screw
Knee
lifter
Knee
plate
13-052 256-05;
91-027
91-027
spring
for
No.
rock
arm
286-15;
297-05;
for
No. 91-027 297-05
91-027
297-05
shaft
PFAFF
467-6
91-027
91
-029
91-029
91-029
91-029
297-05
007-91
480-91
571-25
601-05
Pin,spring-loaded, for No.
Screwd
river
Screwdriver
Catch
Washer
for
No.
91-029840-91
91-027
91-029692-45 Rubber pad cover for No. 91-027291-45
91-029840-91 Catch, complete,
consisting of Nos. 91-029 571-25;
93-513
759-60
91-029
946-91
91-029 960-92
91-035 461-92
91-046 566-21
91-046 570-92 Spool holder
91-046 571-25
91-046 598-91
Screwdriver
Thread
w/
set
screws
Set
collar,w/set
Thread
w/
set
screw
Spool
rest
Thread
unwinder
No.
guide
base,
No.
rod
unwinder,
base,
91-701
378-15
screw
No. 91-000153-15
91-000273-15
complete,
consisting of Nos. 91-026 110-25;
91-026179-45;
91-035 461-92; 91-046 566-21;
91-046 570-92; 91-046 571-25;
91-046
91-029 960-92;
694-05
91-046694-05 Spool pin washer (foam rubber}
91-069 167-45 Belt
guard,
rear
section
91-069170-45 Belt guard, front section
91-069172-15 Bearing bushing for Nos. 11-106 257-15;
91-069167-45;
91-069170-45
91-069306-45 Oil drip pan
91-069328-11
91-069 335-45 Knee
91-069 585-35
91-069742-35 Thread
Locking
Thread
bracket
plate
guide
guide
arm
bracket
91-700785-15 Fastening screw for No. 91-027 294-92
IV
288-15
91-701
91-027
91-027
91-027
291-45
294-92
296-15
Knee
plate
Set
collar,w/set
Knee
lever
vertical
screw
shaft
No.
91-700 785-15
socket
378-15 Fastening screw for No. 91-029960-92
91-701
515-35
93-513
759-60
Nut
Leather
for
No.
91-069
for
No.91-029
585-35
840-91
25
26
V
Accessory
PFAFF
465-6
Parts
27
91-069
PFAFF
769-91
465-6
91-069
773-91
91-069
11-105
796-05
225-15
13-050
11-341
Sa^91-069
094-15
91-069
762-01
277-15
764-91
-91-069
709-12
•11-317949-15
14-215
016-01
738-15
91-069119-05
91-054
371-91
12-024191-15
91-049
095-45
12-500190-15
0 i \
91-069578-05
^2-305171-15
91-169123-05
14-215016-01
91-047
91-069118-45
«
412-04
91-048912-05
91-000
630-15
28
Supplementary
PortsofPfaff
465-6
(For
11-105
225-15
(701 365)
11-317
949-15
(100027)
11-341
277-15
(100138)
12-024191-15
(701
635)
12-305171-15
(50 740)
12-500190-15
(9 150)
13-050
094-15
(1 934)
14-215
016-01
(69 545)
91-000
630-15
91-047
412-04
91-048
912-05
91-049
095-45
91-054
371-91
91-069118-45
91-069119-05
91-069
578-05
91-069
709-12
91-069
738-15
91-069
762-01
91-069
764-91
91-069
769-91
91-069
773-91
91-069
796-05
91-169123-05
91-169
281-91
standard
parts
please
referto the
Binding screw for No. 91-069 773-91
Fastening
Fastening
Nut
Washer
for
No.
for
screw
screw
91-069
No.
for
No.
91-069 709-12
for
No.
91-069 762-01
578-05
12-024191-15
Circlip for No, 12-024191-15
Positioning pin for
Needle
Hinge
Feed
bearing
screw
dog
for No. 91-048 912-05
No.
91-069 796-05
for No. 91-069 738-15
for
No.
91-054371-91
(Orders should specify type desired)
Needle
Vibrating
plate
presser
foot
Lifting presser foot, w/ hinge screws
No.
91-000630-15
Plug (plastic), 19.5 mm dia. for bedplate
Bearing bushing for No. 91-069 120-31
II)
(see p.
Fulcrum stud for Nos. 91-069 738-15;
91
-069
773-91
Set
collar,w/set
No.
11-317
Needle
bar
949-15
frame
screws
shaft
connection
for Nos. 91-069 651-12 (see p. II);
91-069
773-91
Needle
bearing
for No. 91-069769-91
(Orders should specify number of dots
on
needle
bar
frame
fulcrum
1,2,3or
Connecting link, w/
4)
needle
for Nos. 91-069 714-91 (see p.
91-069
769-91
(Supplied
No. 91-069 717-04, only;
Needle
together
bar
with fulcrum stud
frame,
w/
seep.11)
No. 13-050 094-15 Positioning pin
No. 91-069
No.
Feed regulating
w/
Fulcrum
91-069
binding
762-01
796-05
stud,
screw
w/o
Needle
Fulcrum
shaft
No.
borehole
crank, rear,
11-105 225-15
positioning pin No. 91-069
(If
replacement
bar
frame)
Oil
pad
is required, return
(foam plastic)
for No. 99-169143-01 (see p.
Vibrating presser vibrating mechanism.
presser
w/
consisting of
No. 91-169142-91
incorporating vibrating
No. 91-049 095-45
foot
No.
bar
assembly, complete.
same
components as
(seep.
and
91-054
371-91
1),
presser
lifting
(not ill.)
Pfaff
stud
bearing.
11);
bearing
stud
for
769-91
1)
but
foot
presser
467-6,
needle
but
w/o
variable
top
feed)
V
29
(PfflED
PFAFF
467
Tobsfii®d
with
poga:
9
Old
Ports
Part Mumbor Chqng®
Change
No.;
1-25528
-1_25845
Dote;''
Kay
New
Section
1/1
6,66
Parts
91-169
Bobbin
consisting
91-069
91-069
91-169
Remarks;
No.
'•V '
1
The
bobbin
number.For
Ho>
under
91-169
Tab
winder
instructions
029-05,
Title
tension
please
"Parts".
on
has
how
refer
been
to
to
290-91
winder
of
tension,
Kos.
469-55;'91-069
471-55;
029-05
91-169
Retaining
No.
assigned
install
TVB
retaining
Bulletin
complete,
91-004
470-55;
029-05
ring'
91-069:474-55
an
assembly
Ko.
006-05;
for
• ' • •
ring
495
v. .
i. •
••• •
#"••'
• • .•^ - •
'
•.:•
-. .
'-y-
•'
••'
.'.•
laZdi*
Part Number
Change
Section
'165
V/1
To be filed with
9I-O32
20^-11
Remorks:
Feed
consisting of
' 12-005 195-15;
91-032 203-15; 91-032 211-15
The
itispositioned on the
page:
Old
feed
Ports
reversing
reversing
29
Chonge
No.:
1-25
crank,complete,
Nos.
11-105
290-15;
91-031
888-15;
12-005 195-15
crankispushedonfeed regulating shaft
left
of the crank.
060
No.
Dote:
91-
Jul. 13,
New
Ports
91-032 20't-11
,11-105
277-0't so
1967
290-15
,91-032 203-15
91-031
(5
91-032 211-15
12-005 195-15
that
No.2/engl.
To
be filed with page:
91-069
160-0't
Driving
Canada, Great Britain and
(Orders
1, 2 or 3)
9I-O69
6't5-0')
Driving
countries except the U.S.,
Great
(Orders
, 1, 2 or 5)
Part Number Change
13
Old
Parts
belt,w/flat cleats, for
should
specify
belt,w/flat
Britain
should
and Belgium.
specify
number
cleats, for
number
Change
Belgium
of dots:
Canada,
of dots:
U.S.,
only.
all
No.:
I-26
9I-O69
678
I60-O't
Date:
New
Driving
(Orders
1, 2 or 3)
belt,w/flat
should
Jun. 23,
Parts
specify
Section
1967
cleats
number
of dots:
Remarks:
Please
Belgium"
cross
following
out
No.
No.
91-069
91-069
6'»3-0'i
160-0't.
and
the
addendum
No-3/engl.
"for
U.S.,
Canada,
Great
Britain
and
•• r'i -
M
4i1
Section
^
Part Number
Change
- hbl
IIl/l
To be
91-169
filed
084-11
Remarks:
with
page:
Old
Vibrating presser
crank,complete, .
consisting of
12-005 195-15; 91-031 888-15;
91-032-203-15; 91-032 211-15
jhe
vibrating
regulating shaft to the right of the rear bedplate leg.
21
Parts
and
Nos.
presser
Change
feed reserving
11-105
290-15;
and
feed
reversing
No.:
crank
1-25
060
12-005 195-15
11-105 290-15
12-005 195-15
No.
91-169
Date:
New
91-169
08W1
Jul. 13,
Parts
91-032 203-15
91-032 211-15
08't-llismountedonthe
1967
91-031 888-15
top
feed
No*'t/engl.
. ^
_.
Y.'^-a.A
V...V
_V
,'j
«v->v-^
..'
(PFAFF
Section iij2
)
Part Number Chang
e
'167
. • '
^|k1
r
.>1'^
To be
91-059 785-01 Oil
Remar
filed
with
s.
The
and up. For additional'information, please refer to
"Parts".
page;
Old
reservoir
reservoir
new
oil reservoir
13
Parts
No.
91-069
has,
Change
785-01
been
No.;
' .
cannotbereplacedbyoil
incorporated in all
1-25 531
91-159
350-01
machines
TVB
Bulletin
Date:
New
Oil
reservoir
reservoir
assigned Serial
No.
No.
515
jun.
Parts
91-169
No.8602
filed
23,
1967
350-01.
000
under
No.5/engl.
wmiM
Part Number Change
Section
111/2
To be filed with page:
Old
9I-O69
23C-9'I
91-069
252-05
Remarks:
Oil
valv^
consisting of
15-120 112-05; 15-128 010-75;
15-128 060-75; 91-069 251-15;
91-069
252-05;
91-069 257-05;
Nipple
for
91-069 255-05
The
old
parts
all
machines
to
TVB
Bulletin
20
Parts
Change
complete,
Nos.
1')-650
275-05;
91-069
25't-05;
91-069
259-05
Nos.
9I-O69
251-15;
cannotbereplacedbythe
assigned
No. 515
Serial
filed
No.8602
under
No.:
new
000
"Parts".
I-25
9I-I69
91-169
ones.
and
up.
53I
35't-91
555-05
The
For
new
Dote:
V
Jun.
23,
New
Parts
Oil
valve,
complete,.
same
componentsasNo.
but incorporating nipple
91-169 555-05 "
Nipple
(see
parts
additional information, please refer
for
Ctiange
have
been
No.
91-169
No.
7)
incorporated
1967
9I-O69
352-05
250-91
No.
in
No.6/engl.
Part Number
smm,,:-:
Change
Section, in/3
hSl
11
To be filed with
9I-G69
253-^5
Oil
for
(see
9I-O69
12-610
91-069~
11-105
Remarks
083-'t5
220-15
96't-15
I7I-I5 Fastening screw for
Oil
91-069 255-^5
Circlip for
Oil tube holder for
The
all
to
page:
Old
tube,
265mmlong,
Nos.
91-069
page
11)
wick,30mm
old parts
machines
TVS
Bulletin
20
Parts
No.
250-91;
long,for
9I-O69
No.
No.
Change
-91-069
No.
253-^5
91-069
9I-O69
785-01
255-'t5
96't-15
cannotbereplacedbythe
assigned
No. 515
Serial
filed
No.8602
under
No.:
new
000
"Parts".
1-25
91-169
9I-I69
12-610
11-105
ones.
and
up.
531
,352-05
353-05
230-^5
I7I-I5 Fastening screw for
The
new
For
additional information,
Date:
New
Oil
tube,
•or
Nos.
91-169
(see
page
Oil
wick,30mm
91-169 352-05
Circlip for
Omitted
(see
parts
on new
Change
have
Jun, 23,
Parts
235mmlong,
11)
No.
No.
been
incorporated in
35^-91;
long,
91-169
version.
8)
1967
for
352-05
No.
please
91-169
No.
91-169
refer
350-01
356-05
No.7/engl.
yV"'.'
- L., fvi .. .. -• •
wmiM
Part Number Change
V,;Vr.-
Section in/'t
.
To be filed with page:
Old
11-220 192-15
Remarks:
The
new
parts
information, please refer to
2I
Ports
-91-169 357-15
have
been
Change
91-169 356-05
installed
TVB
No.:.1_25
beginning
Bulletin
551
91-169 356-05 Oil tube holder for
11-220
192-15
91-169 357-15 Oil tube holder for
with
Serial
No.8602
No.
515
filed
under
(see
Binding
, (see
"Parts".
Date:
New
Change
Change.
000.
screw
For
j^n.
Parts
No.
7)
for
No.
No.
7)
additional
23,
-196?
No.
91-169 352-05
91-169
No.
91-169 352-05
357-15
No.
8/engl.
''
-•€
.. t
Part Number
Change
Section
467
in/5,
To
be filed with page:
P
• r
.-.U.-J
,1
91-059
Remarks:
417-05^^
Differential
crank
Old
21
Parts
upper
Chonge
feed
regulating
No,:
I-25
103
9I-O69
417-92^^
Date:
New
Differential
w/
binding
jun.
Parts
upper
screw
23,
feed
No.'
11-105
196?
regulating
225-15
crank,
No.
9/enHl,
»
U'-
I'
-t
; • "
r-
. . ,
To be filed with page:
Old
91-169
^2-91
Vibrating
presser
bar assembly, compL,
consistingofNos.91-^'»9
91-05't
295-^1;
91-169
1't5-^1
(Subcl.-6/1)
Remarks:
Part Number Change
Ports
presser vibrating
91-169
compl.;
105^1 compl.;
91-700
Change
mechanism
092-45;
687-15
No.
w/
:
1-27 162
9I-I7O
9I-I7O
607-91
6O8-9I
Section ;
±
Dote:
New
Vibrating
presser
(Subcl.-6/01)
Same
but incorporating presser bar
N0.9I-I69
presser vibrating
bar assembly, compl.,
component
'♦99-91
Vibrating
presser bar assembly, compl.,
(Subcl.-6/02)
Same
component
but incorporating vibrating presser foot
No.91-O't9
No.9l-05't 305-01
093-45
June
26,
Ports
parts as
No.91-169
presser vibrating
parts as
and
No.91-170
lifting
1970
iji
mechanism
1't2-91,
assembly
mechanism
607-91,
presser foot
w/
w/
The
new
parts
(Sheets
Nos.12,13and4)permit
(abt. 9/32").
No.
12 engl.
a fabric
clearance
of 7.0
mm
•
•<!»
Part Number Change
Section j
%7
To be filed with
9I-I69
9I-I69
Remorks:
9I-7OO
H9-9I
149-I5
073-15
Presser
consisting of
12-610
91-169
91-169
.
91-169
Vibrating
Fastening screw for
91-054 505-01; 91-169 191-25
page:
Old
Ports
bar
assembly,
150-^5;
149-15;
151-05;
155-12; 91-700
presser lifting bar
Ttie
new
parts
(abt. 9/52").
compl.,
Nos.11-130
91-169
91-169
91-169
146-05;
150-05;
155-11;
075-55
Nos.91-054
(Sheets
Change
176-15;
295-91;
Nos.12,15
and
No.:
14)
1-27 162
9I-I69
499-91
9I-I69
100-11
11-108 174-55
permit
a fabric clearance of 7.0
Dote:
New
Ports
Presser bar
Samfe
but incorporating
lifting
set
screw No.11-108 174-55
Vibrating presser
Fastening screw for
91-054 505-01
assembly,
component
bar
No.91-169
parts as
mm
June 26,
compl.,
N0.9I-I69
vibrating
100-11
lifting
Nos.91-054
1970
145-91,
presser
and
bar
295-91;
No.
15 engl.
v,!!
J
..
..
.-^v
^ Y j
•?
J-
'
k"
•t
Part Number Chang
Section ;
e
't67
j/i,
Tobefiled
9I-O69
1
Remarks:
79'f-91
with
Needle
consisting of
91-069
page:
Old
Ports
bar, compL,
795-01
The
new
; (abt.
y Change
Nos.91-063
parts
9/32")
111-92;
(Sheets
No.:
Nos.12,13
1-27 162
91-069 571-92
andH)permit
Dote:
New
Ports
Needle
bar,
w/
needle
a fabric clearance of
set
screw No.91-700 336-15
June
7-0
26,1970'
mm
No.
H engl.
r-'C•'• *
5a:
.:,i,A„r''V <
•K-a»••!-':•••:.•••
V'-N-.•
'y
"-/• " ' . ;
"••••^•'•
S r
•'•'••
v;w"a-^'A.
••
•
'v^-v/V
^^•
.a/v.
A.,,,
•
'
-^..^A,,
Part Number Change
Section.
To
be filed with
91-700
36^15
11-105
17I-I5 Fastening
11-266
I7I-35 Fastening
Remarks:
page:
Oldi'arts
91-700
Spring
suspension
for
N0.9I-O69
Spring
suspension
No.15^64
36W
screw
screw
247-05.
5
32h-05
for
for
screw
N0.9I-O69
No.91-069
screw
All
other
Change
1-27 k% 1-26
58't-45
106-35
No.91-700
parts
No.:
364-15
cannotbereplacedbyspring
are
exchangeable.
13-064
11-108
11-268
/,yg
651
247-^5
I7I-I5 Fastening screw for
170-35
Dote:
New
Parts
13-06't 247-05 .
Spring
suspension
Fastening
screw
suspension
June
stud
for
26,
1970
No.91-069
N0.9I-O69
stud
584-45
106-35
No.
15 engl.
•A-f
•"' " V-r-
Ss
•-•'v>'
•-•-
,v'.
-•*'
.
V'
•;
•4,..
"-•:' ^-a'-VA"',/' A a.,/A.-;; \.-
To
be filed with page:
11-105
083-15
Fastening
Old
Parts
screw
for
Part Number Change
Change
N0.9I-O69
459-15
No.:
.j_2y
11-108
162
084-15
Dote:
New
Fastening
Parts
screw
June
for
Section:
46?
26,
1970
No.91-069
1/6
459-15
new
11-108
91-168
11-268
9I-I71
ones.
11-105
9I-O69
11-266
9I-I69
Remarks:
NO.16
087-15
637-35
171-35
111-92
engl.
Fastening
Thread
Fastening
Vibrating
binding screw
The
screw
guide,
screw
presser
old
for
No.91-069
lower
for
No.91-069
rocker
No.11-105
parts
lever,
225-15
can be replaced by the
467-15
106-35
w/
087-15
065-35
170-35
330-92
Fastening
Thread
Fastening
Vibrating
binding screw
screw
guide,
screw
presser
for
N0.9I-O69
lower
for
No.91-069
rocker
No.11-108
lever,
225-15
467-15
106-35
w/
'-f
Part Number Change
Section,
kej
To be
11-105
11-106
11-105
Remarks:
filed
225-I5
236-15
I77-I5
witfi
page:
Old
Binding
91.-169
screw
110-92; 9I-169 111-92
Fastening
Binding
91-169 135-12; 91-169 155-12
screw
Parts
screw
The
7
for
N0S.9I-O69
for
for
Nos.91-169
old
N0.9I-O69
parts
Change
102-12;
5't3-91
126-12;
can be replaced by the
No.:
11-108
11-108
11-108
"1-27
Dafe:
162
Mew
Parts
22^15
237-I5
I77-I5 Binding'screw for
new
Binding
91-169 110-92; 9I-I69 111^2
Fastening
91-169 135-12; 91-169 155-12
ones. ' '
screw
screw
for
June'26,
N0S.9I-O69
for
No.91-069
Nos.91-169
1,970
102-12;
5't3-91
126-12;
No.
17 engl.
••.
:v-.
Part Number Change
Section ;ji/3
To be filed with
9I-O69
137-55
9I-O69
138-15
11-205
959-55
I5-7I8
O5&-5I
11-105 177-15
9I-7OO
Remarks:
288^15
Stitch length dial •
Stitch length
fastening screw for
Bail bearing sealer for
Binding
End
The
N0.9I-I7O
All the other old
page:
Old
15
Parts
Change
No.
cam
No.91-069
screw
for
No.91-059
screw for No.91-069 ^72-91 .
158-15
No.91-069
A72-91
^72-91
following parts are not exchangeable:
722-45,
and
stitch
parts
can be exchanged by
length
cam
:
1-26
ZS't
1-28
718
91-170
9I-I7O
11-205 095-55 Fastening screw for
9I-I69
stitch
No.91-069
new
722-45
725-11
099-45
11-108
I77-I5
11-17;, 086-15
length dial
158-15bystitch
ones.
Date:
New
Stitch length dial
Stitch length
Lubricating nipple for
Binding
End
screw
N0.9I-O69
Aug.
Parts
cam
screw for
for
N0.9I-O69 472-91
157-55bystitch
length
cam
No.91-170
21, 1970
No.91-170
No.91-069
N0.9I-O69
725-11
1t72-91
^72-41
length dial
725-11.
No.
18 engl.
' ' ' V
-ۥ
:;•
j
,wr
>
15^-
1/^
M ^ I • i «
• Li
S • • • 1•
To
9I-O69
91-701
11-314
Remarks
--
••'
7'
1 •
'S
be filed with page:
Old
7't5-92'
378-15
280-15
Balance
No.91-701
No.11-314
wheel,
Fastening
for No.91-069 745-92
Fastening
The
old
balance
replaced by the
13
Ports
w/
378-15
280-15
screw
Set screw(M6x8)
Set screw(M6x8).
(H-6x8)
screw(M6x8)
wheel
new
ones.
Part Number
Change
can be replacedbythe
No.:
Change
1-27
318
9I-I7O
9I-IOO
9I-7OO
new
638-92
253-15
5IO-I5
ones.
Dote:
Balance
N0.9I-IOO
No.91-700
Fastening
fastening
The
old fastening
New
Ports
wheel,
253-15
510-15.
screw(M6x0.75),
screw(M6x0.75),
w/
screws
Section
'(57
Aug.
21,
1970-
-Set
screw(M6x0.75),
pointed
Set
screw(M6x0.75),
blunt
pointed
blunt
cannot be
.
-
No.
19 engl.
,
'•:.
>•-<••
#•
••p.
; '
•-•.•••->*rM.
1;
-
.A, .
r':;
^
(PFAFF)
Part Number Change
Section ; ji/5
467
To be filed with
91-069
721-12
Set collar for
set
(Thread = M5x5)
11-317
9I-O69
Remarks:
95O-I5
Fastening
for No.91-069 721-12
723-12^)vibrating
(on
shaft crank)
binding screw
Fastening
All other
page:
Old
screws
Pfaff
Parts
N0.9I-O69
No.11-3i7
screw
presser
'♦65
w/
screw
parts
950-15
(Thread
vibrating
usedasneedle
No.11-105
No.11-317
can be replaced by the
Change
yiMl,
= M
5x5)
shaft
vibrating
225-15
95&-15
No.:
w/
crank
1-26
3^3
1-25
6^
91-169
91-700
9I-O69
457-12
689-15
Set collarw/set
(Thread
for No.91-069 714-91 •
Fastening
for
724-12'')vibrating
(on
shaft
binding screw
cannotbereplacedbyfastening
new
ones.
Date:
New
Parts
= M6x0.75),
screw
N0.9I-I69 457-12
presser
Pfaff.465
crank)
screw
No.9l-700
,
Aug.
24,
screw
No.91-700
(ThreadM6x0.75)
vibrating
usedasneedle
w/
No.11-108
225-15
689-15
1970
shaft
vibrating
689-15
crank
No.
20 engl.
U
I'
vV-j:'
:/;v,,
- •
v-.
•,
• • " •
:•
ii:
v,-v^-r»-S
Part Number
Change
Section:
•467 -
11/6
To
be filed with page:
13
Old
Parts
11-105
225-15
11-310
478-15
12-005195-15 Nut for No.11-310 478-15
9I-7OO
333-I5
Remarks
Binding
91-069 723-12
Stop
91-169 304-15
Fastening
screw
screw
for
screw
The
for
Nos.9l-069
Nos.91-069
for
old
parts
Change
418-12;
326-15;
No.91-069
633-91
can be replaced by the
No.:
-|_26
624
1-26
108
11-108
225-15
11-305
299-I5
9I-7OI" 664-15 Nut for No.11-305 299-15
9I-IOO
27O-I5
new
ones.
Date:
New
Parts
Rinding
91-069724-12
Stop,screw
91-169 304-15
Fastening
screw
for
screw
Aug.
for
Nos.91-069
Nos.91-069
for
N0.9I-O69
24,
1970
418-12;
326-15;
633-91
No.21engl.
• JV
%-.ii•
, •;;a
.
/^
-
•,
•r.:
Part Number Change
Section ;Iii/8
hhl
To be filed with
11-105
225-l55^Binding
11-105
12-610
22^15
230-45
Binding
91-069
91-069 547-11 and
set
Eirclip for
(see part
Remarks:
page:
Old
296-12;
screw
19
Parts
screw
for
screw
for
91-069
for
N0.9I-O69 097-05
N0.9I-I69
number
The
old
Change
N0.9I-O69
Nos.91-069
change
parts
417-05
28H1;
420-12;
352-05
No.
7)
can be replaced by the
No.:
11-108
11-108
12-610
new
Date:
New
225-15^)Binding
225-I5
240-45
ones.
Binding
91-069
91-069 547-11 and
set
Circlip for N0.9I-I69
screw
screw
296-12;
screw for N0.9I-O69 097-05
Parts
Aug.
for
N0.9I-O69
for
Nos.91-069
91-069
25,
420-12;
352-05
1970
417-05
284-91;
•
'
No.
22 engl.
W-
. • -
i'
•: • (
I • , '
Part Number Change
Section . jjj/g
467
To be filed with
11-220
91-169
11-105
172-155)End
132-I55)washer
(see Section
I7I-T5
Fastening
(see part
Remarks:
page:
Old
screw
for
19
Ports
for
No.91-169
No.91-169
II)
screw
for
number
change
The
152-15
171-15
No.91-169
No.7)
old
parts
Change
No.:
556-05
can be replaced by the
Dote:
1-26 585
11-178
l66-155^End
Deleted
No.11-178
11-108
I7I-I5 Fastening screw for
new
ones.
New
screw
when new
Aug.
Parts
for
No.91-169
end
screw
I66-I5isused.
No.91-169
25, 1970 .
172-05
556-05
.
No.
25 engl.
*f.'-- < •
•&'V:
•
••••. .
'.•-•'••!'
.•••
•
-.'
'
i-*-.
-. •
•;,•/>,*.
- j •
(PFAFF)
Part Number Change
Section; ni/IO
't67
• '''n>
To be filed with
11-105
17't-15
11-105 177-15
Remarks:
Binding
Binding
91-069
set
91-169059-15
page:
- • 4 "
Old
Ports
screw
for
No,91-069
screw for
2'»V-91;
screw for
The
old
Nos.91-069
91-069
Nos.91-069
parts
Change
No.:
55M2
Z^tJ-IZ;
5'>7-11
and
301-15;
can be replaced by the
Date:
New
11-108
I77-I5
II-IO8
new
I77-I5
ones, ' '
Binding
Binding
91-069
set
91-169 059-15
screw
screw
2Vit-91;
screw for Nos.91-069 301-15;
-
Ports
Aug.
for
No.91-059
for
N0S.9I-O69
91-069
25, 1970
5^7-11
55't-92.
2't3-12;
and
\
• "N
No.2hengl.
Wf'
3=- V-
sKs
••
m
ft"
••
Part Number
Change
Section:
467
IIl/H
ji§.'"ir^;';
To be filed with
91-047
373-04
feed
(subcl.-^/2)
91-048
076-04
Remarks:
Needle
(subcl.-6/2)
page:
Old
dog,
plate for
19
Parts
saw-tooth cut
\
No.91-047
The
old
parts
Change
No.:
375-04
can be replaced by the
1-26
91-047
91-058
new
601
547-04
048-04-
ones.
Dote:
New
Parts
Feed
dog,
saw-tooth cut
(subcl.-6/02)
Needle
plate for
(subcl.-6/02)
Aug.
25,
1970-
No.91-047
547-04
No.25engl.
Loading...