Peugeot 207 Dag 2005 Owner's Manual

FAMILIARISATION

INSTRUMENTS AND CONTROLS

1. Cruise control/speed limiter switch.

2. Steering wheel adjustments

control.

3. Lights and direction indicators

controls.

4. Instrument panel.

5. Driver’s air bag.

Horn.

6. Gear lever.

7. Handbrake.

8. Bonnet release control.

9. Exterior mirror controls.

Electric window controls. Rear electric windows deactivation

control.

10. Fuse box.

11. Headlamp height adjustment.

12. Side adjustable and closing vent.

13. Front door window de-icing vent.

14. Speaker (tweeter).

15. Windscreen de-icing vent.

INSTRUMENTS AND CONTROLS

1. Steering lock and ignition.

2. Audio equipment steering wheel

control.

3. Wipers/wash-wipe/trip computer

controls.

4. Hazard warning lights switch.

5. Fragrance diffuser.

6. Multifunction display.

Seat belt fastening status warning

lights.

7. Sunshine sensor.

8. Passenger air bag.

9. Glove box/Passenger air bag

disarming/Audio/video sockets.

10. Heated seat control.

11. Front ashtray/Lighter.

12. Rear parking assistance button.

Dynamic stability control

(ESP/ASR) button.

Central locking button. Alarm button.

Electric child lock button.

13. Heating/air conditioning controls.

14. CD changer.

15. Audio RD4 or RT3 GPS audio/

telephone.

16. Central adjustable and closing

vents.

FAMILIARISATION

OPEN

Remote control key

A. Unfolding/Folding the key. B. Unlocking the vehicle.

 64

Also... C. Normal locking

or Deadlocking

of the vehicle.

Fuel tank

1. Opening the fuel ﬁller ﬂap.

2. Opening and hooking the fuel ﬁller

cap.

Capacity of the tank: approximately 50 litres.

 77

Bonnet

A. Interior control. B. Exterior control. C. Bonnet strut.

 115

FAMILIARISATION

SITTING COMFORTABLY

Front seat adjustment Steering wheel adjustment

1. Unlocking the control.

2. Height and depth adjustment.

3. Locking the control.

 58

1. Forwards-backwards adjustment.

2. Height adjustment.

3. Seat back angle adjustment.

4. Head restraint height and angle

adjustment.

 52

Also...

5. Access to the rear seats

(3-door model).

6. Armrest.

7. Heated seat.

FAMILIARISATION

SITTING COMFORTABLY

Exterior mirrors adjustment

A. Selecting the mirror. B. Adjusting the position

of the mirror.

C. De-selecting the mirror.

 56

Also... D. Folding/Unfolding.

Interior mirror adjustment

1. Selecting the "day" position

of the mirror.

2. Directing the mirror.

 57

Front seat belt

1. Fastening.

2. Height adjustment.

 98

SEEING CLEARLY

Lights

Ring A Switching on "AUTO" mode

 Push the lever downwards and

release it.

Ring B

Lever A: windscreen wipers

2. Fast wipe.

1. Normal wipe. I. Intermittent wipe.

0. Park. AUTO  Automatic wiping

or single wipe.

Wash-wipe: pull the lever towards you.

 82

Wipers

Switching off "AUTO" mode

 Push the lever upwards and return it

to position "0".

 84

Ring B: rear wiper

 78  83

Lights off.

Automatic switching on of the lights.

Side lights.

Dipped/main beam headlamps.

Rear fog lamps.

Front and rear fog lamps.

Park.

Intermittent wipe.

Wash-wipe.

FAMILIARISATION

–

FAMILIARISATION

VENTILATION

Advice on interior settings

Heating or Manual air conditioning

I require...

Air distribution Air ﬂow

HEAT

COOL

DEMISTING

DE-ICING

Automatic air conditioning: use of the fully automatic mode by pressing the "AUTO" button is preferable.

Air recirculation/

Exterior air intake

Temperature Manual A/C

MONITORING

FAMILIARISATION

Instrument panel Controls bar

A. With the ignition on, the fuel gauge

needle should rise.

B. With the engine running, the

associated low level warning light should switch off.

C. With the ignition on, the oil level

indicator should display "OIL OK" for a few seconds.

If the levels are not correct, top up the level which is low.

 20

Warning lights

1. With the ignition on, the orange

and red warning lights come on.

2. With the engine running, these

warning lights should switch off.

If a warning light remains on, refer to the page concerned.

 21

Lighting of the indicator light indicates the status of the corresponding function.

A. Deactivation of the rear parking

assistance.

 112

B. Deactivation of the ESP/ASR

system.

 97

C. Central locking.

 73

D. Deactivation of the interior

protection alarm.

 68

E. Activation of the electric child lock.

 93

FAMILIARISATION

KEEPING YOUR PASSENGERS SAFE

Front passenger air bag Ignition switch

1. Open the glove box.

2. Insert the key.

3. Select position:

"ON" (activation), with front

passenger or "forwards facing" child seat,

"OFF" (deactivation), with

"rear facing" child seat".

4. Remove the key keeping

the switch in this position.

 101

Front and rear seat belts

A. Front left seat belt not fastened or

unfastened warning light lit in red.

B. Front right seat belt fastened

warning light lit in green.

C. Rear left seat belt fastened

warning light lit in green.

D. Rear centre seat belt unfastened

warning light lit in red.

E. Rear right seat belt fastened

warning light lit in green.

 99

START

1. Stop position.

2. Ignition position.

3. Starting position.

 66

DRIVING SAFELY

Speed limiter Instrument panel display

1. Selecting/Switching off

speed limiter mode.

2. Decrease the programmed value.

3. Increase the programmed value.

4. Speed limiter on/off.

The values must be set with the engine running.

 108

The cruise control or speed limiter mode appears on the instrument panel when it is selected.

1. Selecting/Switching off cruise

control mode.

2. Decrease the programmed value.

3. Increase the programmed value.

4. Cruise control on/off.

In order to be programmed or activated, the vehicle speed must be higher than 25 mph (40 km/h), with at least fourth gear engaged on the manual gearbox.

 110

Cruise control

Speed limiter

FAMILIARISATION

EXTERIOR FEATURES

Panoramic roof

This extensively glazed roof provides incomparable visibility and light in the passenger compartment.

 76

Directional lighting

This additional lighting automatically provides extended visibility when turning.

 81

Rear parking assistance

This equipment provides a warning when reversing by detecting obstacles located behind the vehicle.

 112

Tyre under-inﬂation detection

This equipment monitors the pressure in each tyre and warns you if a puncture or deﬂation occurs.

 95

INTERIOR FEATURES

FAMILIARISATION

Dual zone automatic air conditioning

This equipment permits the setting of a different level of comfort for the driver and front passenger. It then automatically controls this level in relation to the exterior climatic conditions.

 49

"2 Tronic" gearbox

This equipment provides perfect driving by combining a fully automatic mode, a manual mode and an auto-sequential mode which unites the advantages of the other two modes.

 105

Fragrance diffuser

This fragrance diffuser diffuses the perfume that you have selected throughout the passenger compartment by means of its location in the ventilation system.

 51

Audio and communication systems

This equipment beneﬁts from the latest technology: MP3 compatible audio RD4, Bluetooth hands-free kit, RT3 audio/telephone with navigation, JBL audio system.

RT3  151 RD4  174

WARNING LIGHTS AND INDICATORS

PETROL - DIESEL MANUAL GEARBOX OR "2 TRONIC" GEARBOX INSTRUMENT PANELS

Panel which groups together the vehicle operation dials and indicator lights.

Dials

1. Rev counter. Indicates the speed of rotation of

the engine (x 1 000 rpm).

2. Fuel gauge. Indicates the quantity of fuel

remaining in the tank.

3. Cooling temperature. Indicates the temperature of the

engine coolant (° Celsius).

4. Speedometer. Indicates the current speed of the

moving vehicle (km/h or mph).

5. Oil temperature. Indicates the temperature of the oil

in the engine (° Celsius).

6. Display.

7. Display zero reset button. Resets the selected function to

zero (trip distance recorder or service indicator).

8. Instrument panel lighting button.

Adjusts the brightness of the

lighting of the instruments and controls.

9. "2 Tronic" gearbox.

Indicates the programme selected

and the gear engaged.

Display

A. Speed limiter

or Cruise control. (km/h or mph) B. Trip distance recorder. (km or miles) C. Service indicator. (km or miles) then,

Engine oil level indicator.

then

Distance recorder.

(km or miles) These three functions are

displayed in succession when the ignition is switched on.

For further information, refer to the section which corresponds to the function and to the display associated with it.

WARNING LIGHTS AND INDICATORS

The indicator/warning light comes on continuously or ﬂashes.

Some indicator/warning lights may light in two different ways. Only by relating the type of lighting to the vehicle operating status can it be ascertained whether the situation is normal or whether a fault has occurred.

Indicator and warning lights

Visual indicators which inform the driver when a system comes into operation (operation or deactivation indicator lights) or of the occurrence of a fault (warning light).

Associated warnings

The lighting of certain indicator/warning lights may be accompanied by an audible signal and a message on the multifunction display.

Operation indicator lights

The lighting of one of the following indicator lights conﬁrms that the corresponding system has come into operation.

Left-hand direction indicator.

Handbrake applied.

Right-hand direction indicator.

Main beam headlamps.

Dipped headlamps.

Diesel engine pre-heating.

Wait until this switches off before operating the starter.

Front fog lamps.

Rear fog lamps.

When the ignition is switched on

The warning lights come on for a few seconds when the vehicle ignition is switched on.

When the engine is started, these warning lights should switch off.

If they remain on, before moving off, consult the warning light concerned.

WARNING LIGHTS AND INDICATORS

Deactivation indicator lights

The lighting of one of the following indicator lights conﬁrms that the corresponding system has been switched off intentionally.

Passenger air bag system disarmed.

The passenger air bag system is activated automatically when the vehicle is started.

A special switch, located in the glove box, permits the disarming of this system. This is conﬁrmed by continuous lighting of this indicator light.

Deactivation of the dynamic stability control (ESP).

The ESP system is activated

is started. A special button, located in the centre

of the fascia, permits the deactivation of this system. This is conﬁrmed by continuous lighting of this indicator light and of the indicator light on the button.

automatically when the vehicle

WARNING LIGHTS AND INDICATORS

Warning lights

When the engine is running or the vehicle is moving, the lighting of one of the following warning lights indicates the occurrence of a fault which requires action on the part of the driver.

Any fault resulting in the lighting of a warning light must be the subject of further diagnostics by reading the associated message on the multifunction display.

If a problem arises, do not hesitate to contact a PEUGEOT dealer.

Centralised alert.

Lighting of the centralised alert is associated with the lighting of another warning light:

- punctured wheel,

- braking,

- engine oil pressure,

- coolant temperature. It is imperative that the vehicle is stopped as soon as it is safe to do so.

Service.

Lighting of the service warning light indicates the occurrence of a problem in one of the systems

warning light. To identify the problem, consult the

message on the multifunction display. After checking:

- the remote control battery,

- the tyre inﬂation pressures,

- the engine oil level,

- the screenwash level,

- the condition of the bulbs, for other cases, contact a PEUGEOT dealer.

that the vehicle is stopped as soon as it is safe to do so.

Change the damaged wheel and have it repaired by a PEUGEOT dealer.

system. However, this does not prevent the

operation of the vehicle’s assisted braking.

which does not have a speciﬁc

Punctured tyre.

The lighting of this warning light indicates that one or more tyres are punctured. It is imperative

Anti-lock braking system (ABS).

The lighting of this warning light indicates the occurrence of a fault in the anti-lock braking

WARNING LIGHTS AND INDICATORS

Air bags.

The lighting of this warning

light indicates the occurrence

of a fault in one of the air bags (front, side or curtain) or pre-tensioning seat belt systems.

Dynamic stability control (ESP).

The ESP system is activated

automatically when the vehicle

is started. Unless the system has been deactivated,

continuous lighting of this warning light and ﬂashing of the indicator light on the button indicate the occurrence of a fault in this system.

Engine autodiagnostics

system.

The lighting of this warning light

indicates the occurrence of a fault in the engine management system.

Flashing of this warning light indicates the occurrence of a fault in the emission control system.

Engine oil pressure.

The lighting of this warning light

indicates the occurrence of a

fault in the engine lubrication circuit. It is imperative that the vehicle is stopped as soon as it is safe to do so.

Battery charge.

The lighting of this warning light indicates the occurrence of a

fault in the battery charging circuit (dirty or loose terminals, slack or cut alternator belt, ...).

Braking.

The lighting of this warning

light indicates the occurrence

of a fault in one of the braking systems:

- signiﬁcant drop in the level in the

circuit,

- electronic brake force distribution

(EBFD) faulty (if lit at the same time

as the ABS warning light). It is imperative that the vehicle is stopped as soon as it is safe to do so.

If the vehicle is moving, check that the handbrake has been released fully.

Low fuel level.

The lighting of this warning light indicates that there is enough

fuel left to drive approximately 30 miles (50 km). The capacity of the fuel tank is approximately 50 litres.

Low coolant level.

Flashing of this warning light

indicates a drop in the level

in the cooling system. It is imperative that the vehicle is stopped as soon as it is safe to do so.

Door open.

A door, the boot or the bonnet is still open:

- if the speed is below 6 mph (10 km/h), this warning light comes on continuously,

- if the speed is above 6 mph (10 km/h), this warning light comes on continuously, accompanied by an audible signal.

Seat belt not fastened/ unfastened.

The lighting of this warning light

indicates that the driver* and/or the front passenger has not fastened his seat belt or has unfastened it.

It also indicates that one or more rear passengers have unfastened their seat belt.

Power steering.

The lighting of this warning

light indicates the occurrence

of a fault in the electric power steering.

Presence of water in diesel.

The lighting of this warning light

indicates the presence of water

in the diesel ﬁlter.

There is a risk of damage to the injection system on Diesel engines.

Directional headlamps.

Flashing of this warning light indicates the occurrence of a fault in the directional headlamps system.

* According to country.

WARNING LIGHTS AND INDICATORS

Coolant temperature indicator

System which informs the driver of the changes in the temperature of the engine coolant while driving.

With the engine running, when the needle is:

- in zone A, the temperature is correct,

- in zone B, the temperature is too

high; the max temperature warning light 1 and the central STOP warning light come on, accompanied by an audible signal and a message on the multifunction display.

You MUST stop as soon as it is safe to do so.

Contact a PEUGEOT dealer.

After driving for a few minutes, the temperature and pressure in the cooling system increase.

To top up the level:

 wait for the engine to cool,  unscrew the cap by two turns to allow

the pressure to drop,

 when the pressure has dropped,

remove the cap,

 top up the level to the "MAX" mark.

Engine oil temperature indicator

System which informs the driver of the changes in the temperature of the engine oil while driving.

With the engine running, when the needle is:

- in zone C, the temperature is correct,

- in zone D, the temperature is too high;

the oil pressure warning light and the central STOP warning light come on, accompanied by an audible signal and a message on the multifunction display.

You MUST stop as soon as it is safe to do so.

Contact a PEUGEOT dealer.

WARNING LIGHTS AND INDICATORS

Service indicator

System which informs the driver when the next service is due, in accordance with the manufacturer’s servicing schedule.

The point at which the service is due is calculated from the last indicator zero reset. It is determined by two parameters:

- the distance travelled,

- the time elapsed since the last service.

More than 1 000 miles (km) remain before the next service is due

For 5 seconds after the ignition is switched on, the spanner symbolising the maintenance operations comes on. The distance recorder display line indicates the distance remaining before the next service is due.

Example: 4 800 miles (km) remain before the next service is due.

For 5 seconds after the ignition is switched on, the display indicates:

5 seconds after the ignition is switched on, the maintenance spanner is switched off; the distance recorder resumes its normal operation. The display then indicates the total and trip distances.

Less than 1 000 miles (km) remain before the next service is due

Example: 900 miles (km) remain before

the next service is due. For 5 seconds after the ignition is

switched on, the display indicates:

5 seconds after the ignition is switched on, the distance recorder resumes its normal operation. The maintenance spanner remains on to indicate that a service must be carried out soon.

WARNING LIGHTS AND INDICATORS

Service overdue

For 5 seconds after the ignition is switched on, the maintenance spanner ﬂashes to indicate that the service must be carried out as soon as possible.

Example: the service is overdue by 300 miles (km).

For 5 seconds after the ignition is switched on, the display indicates:

5 seconds after the ignition is switched on, the distance recorder resumes its normal operation. The maintenance

spanner remains lit.

The distance remaining may be weighted by the time factor, depending on the driver’s driving habits.

Therefore, the maintenance spanner may also come on if you have exceeded the two year service interval.

Service indicator zero reset

After each service, the service indicator must be reset to zero.

To do this, carry out the following procedure:

 switch off the ignition,  press and hold the trip distance

recorder zero reset button,

 switch on the ignition; the

distance recorder display begins a countdown,

 when the display indicates "=0",

release the button; the service spanner disappears.

Following this operation, if you wish to disconnect the battery, lock the vehicle and wait at least ﬁve minutes for the zero reset to be taken into account.

WARNING LIGHTS AND INDICATORS

Engine oil level indicator

System which informs the driver of the validity or invalidity of the engine oil level.

This information is indicated for a few seconds when the ignition is switched on, after the service information.

The level read will only be correct if the vehicle is on level ground and the engine has been off for more than 15 minutes.

Oil level correct

Lack of oil

This is indicated by the ﬂashing of "OIL", linked with the service warning light, accompanied by an audible signal and a message on the multifunction display.

If the lack of oil is conﬁrmed by a check using the dipstick, it is essential that the level is topped up to prevent damage to the engine.

Oil level gauge fault

This is indicated by the ﬂashing of

"OIL --". Contact a PEUGEOT dealer.

Dipstick

Refer to the "Checks" section to locate the dipstick and the oil ﬁller cap on your engine.

There are 2 marks on the dipstick:

- A = max; never exceed

this level,

- B = min; top up the level

via the oil ﬁller cap, using the type of oil suited to your engine.

WARNING LIGHTS AND INDICATORS

Total distance recorder

System which measures the total distance travelled by the vehicle during its life.

The total and trip distances are displayed for thirty seconds when the ignition is switched off, when the driver’s door is opened and when the vehicle is locked or unlocked.

Trip distance recorder

System which measures a distance travelled during a day or other period until it is reset to zero by the driver.

 With the ignition on, press the button

until zeros appear.

Lighting rheostat

System for manual adjustment of the brightness of the instruments and controls in relation to the exterior brightness.

Activation

When the lights are on:

press the button to change the brightness



of the instruments and controls,

 when the lighting reaches the

minimum setting, release the button, then press again to increase it,

or  when the lighting reaches the

maximum setting, release the button, then press again to reduce it,



when the lighting reaches the level of

brightness required, release the button.

Deactivation

When the lights are off, or in day mode on vehicles ﬁtted with daytime lights, pressing the button does not have any effect.

CLOCK

Integrated system which displays the time with independent setting of the hours and minutes.

Button 1: setting of the hours. Button 2: setting of the minutes.

Setting

 Press the corresponding button

brieﬂy to obtain slow scrolling.

 Continue to press the corresponding

button to obtain rapid scrolling.

WARNING LIGHTS AND INDICATORS

MONOCHROME SCREEN A (without RD4 audio equipment)

Displays on the screen

This displays the following information:

- the time,

- the date,

- the outside temperature* (this ﬂashes if there is a risk of ice),

- the status of the accesses (doors, boot, ...),

- the trip computer (refer to the end of the section).

Warning messages (e.g.: "Emission control system faulty") or information messages (e.g.: "Boot open") may appear temporarily. These can be cleared by pressing the "ESC" button.

Controls General menu

 Press the "MENU" button to scroll

through the various menus of the general menu:

- vehicle conﬁguration,

- options,

- display settings,

There are three display control buttons:

- "ESC" to abandon the operation in

progress,

- "MENU" to scroll through the menus

or sub-menus,

- "OK" to select the menu or sub-menu

required.

- languages,

- units.

 Press the "OK" button to select the

menu required.

* With air conditioning only.

WARNING LIGHTS AND INDICATORS

Vehicle configuration

Once the "Vehicle conﬁguration" menu has been selected, you can activate or deactivate the following equipment:

- wiper linked with reverse gear (refer to the "Visibility" section),

- directional headlamps (refer to the "Visibility" section),

- "follow-me-home" lighting (refer to the "Visibility" section),

Options

Once the "Options" menu has been selected, you can start diagnostics of the status of the equipment (active, not active, faulty).

Display settings

Once the "Display settings" menu has been selected, you can gain access to the following settings:

- year,

- month,

- day,

- hour,

- minutes,

- 12 or 24 hour mode.

 Once you have selected a setting,

press the "OK" button to change its value.

 Wait for approximately ten seconds

without any action to allow the changed data to be recorded or press the "ESC" button to cancel.

The display then returns to the normal display.

Languages

Once the "Languages" menu has been selected, you can change the language used by the display (Français, Italiano, Nederlands, Portugues, PortuguesBrasil, Deutsch, English, Espanol).

Units

Once the "Units" menu has been selected, you can change the units of the following parameters:

- temperature (°C or °F),

- fuel consumption (l/100 km, mpg or km/l).

For safety reasons, conﬁguration

of the multifunction displays by the driver must take place when stationary.

WARNING LIGHTS AND INDICATORS

MONOCHROME SCREEN A Controls

From the RD4 audio equipment control panel, you can:

 press the "MENU" button to gain

Displays on the screen

This displays the following information:

- the time,

- the date,

- the outside temperature* (this ﬂashes if there is a risk of ice),

- the status of the accesses (doors, boot, ...),

- the audio sources (radio, CD, ...),

- the trip computer (refer to the end of the section).

Warning messages (e.g.: "Emission control system faulty") or information messages (e.g.: "Boot open") may appear temporarily. These can be cleared by pressing the "ESC" button.

access to the general menu,

 press the "" or "" buttons to

scroll through the items on the screen,

 press the "MODE" button to change

the permanent application (trip computer, audio source, ...),

 press the "" or "" buttons to

change a setting value,

 press the "OK" button to conﬁrm, or

 press the "ESC" button to abandon

the operation in progress.

General menu

 Press the "MENU" button to gain

access to the general menu, then press the "" or "" buttons to scroll through the various menus:

- radio-CD,

- vehicle conﬁguration,

- options,

- display settings,

- languages,

- units.  Press the "OK" button to select the

menu required.

Radio-CD

With the RD4 audio equipment switched on, once the "Radio-CD" menu has been selected you can activate or deactivate the functions linked with use of the radio (RDS, REG), the CD or the CD changer (introscan, shufﬂe, CD repeat).

For further details concerning the "Radio-CD" application, refer to the RD4 part of the "Audio and Telematics" section.

* With air conditioning only.

WARNING LIGHTS AND INDICATORS

Vehicle conﬁguration

Once the "Vehicle Conﬁguration" menu has been selected, you can activate or deactivate the following equipment:

- wiper linked with reverse gear (refer to the "Visibility" section),

- directional headlamps (refer to the "Visibility" section),

- "follow-me-home" lighting (refer to the "Visibility" section).

Options

Once the "Options" menu has been selected, you can start diagnostics of the status of the equipment (active, not active, faulty).

Display settings

Once the "Display settings" menu has been selected, you can gain access to the following settings:

- year,

- month,

- day,

- hour,

- minutes,

- 12 or 24 hour mode.

 Once you have selected a setting,

press the "" or "" buttons to change its value.

 Press the "" or "" buttons to

switch respectively to the previous or next setting.

 Press the "OK" button to record

the change and return to the normal display or press the "ESC" button to cancel.

Languages

Once the "Languages" menu has been selected, you can change the language used by the display (Français, Italiano, Nederlands, Portugues, PortuguesBrasil, Deutsch, English, Espanol).

Units

Once the "Units" menu has been selected, you can change the units of the following parameters:

- temperature (°C or °F),

- fuel consumption (l/100km, mpg or km/l).

For safety reasons, the conﬁgura-

tion of the multifunction displays by the driver must take place when stationary.

WARNING LIGHTS AND INDICATORS

MONOCHROME SCREEN C General menu

Displays on the screen

This displays the following information:

- the time,

- the date,

- the outside temperature* (this ﬂashes if there is a risk of ice),

- the status of the accesses (doors, boot, ...),

- the audio sources (radio, CD, ...),

- the trip computer (refer to the end of the section).

Warning messages (e.g.: "Emission control system faulty") or information messages (e.g.: "Automatic switching on of the headlamps activated") may appear temporarily. These can be cleared by pressing the "ESC" button.

* With air conditioning only.

Controls

From the RD4 audio equipment control panel, you can:

 press the "MENU" button to gain

access to the general menu,

 press the "" or "" buttons to

scroll through the items on the screen,

 press the "MODE" button to change

the permanent application (trip computer, audio source, ...),

 press the "" or "" buttons to

change a setting value,

 press the "OK" button to conﬁrm, or

 press the "ESC" button to abandon

the operation in progress.

 Press the "MENU" button to gain

access to the general menu:

- audio functions,

- trip computer (refer to the end of the section),

- personalisation-conﬁguration,

- telephone (hands-free kit).

 Press the "" or "" buttons to

select the menu required, then conﬁrm by pressing the "OK" button.

"Audio functions" menu

With the RD4 audio equipment switched on, once this menu has been selected you can activate or deactivate the functions linked with use of the radio (RDS, REG, RadioText), the CD or the CD changer (introscan, shufﬂe, CD repeat).

For further details concerning the "Audio functions" application, refer to the RD4 part of the "Audio and Telematics" section.

"Trip computer" menu

Once this menu has been selected, you can consult information concerning the status of the vehicle (warnings log, status of the functions, ...).

WARNING LIGHTS AND INDICATORS

"Personalisation-Configuration" menu

Once this menu has been selected, you can gain access to the following functions:

- deﬁne the vehicle parameters,

- display conﬁguration,

- selection of the language.

Deﬁne the vehicle parameters

Once this menu has been selected, you can activate or deactivate the following equipment:

- wiper linked with reverse gear (refer to the "Visibility" section),

- directional headlamps (refer to the "Visibility" section),

- "follow-me-home" lighting (refer to the "Visibility" section).

Example: setting of the duration of the "follow-me-home" lighting

 Press the "" or "" buttons, then

the "OK" button to select the menu required.

 Press the "" or "" buttons,

then the "OK" button to select the "Follow-me-home lighting" line.

 Press the "" or "" buttons to

set the value required (15, 30 or 60 seconds), then press the "OK" button to conﬁrm.

 Press the "" or "" buttons, then

the "OK" button to select the "OK" box and conﬁrm or press the "ESC" button to cancel.

Display conﬁguration

Once this menu has been selected, you can gain access to the following settings:

- brightness-video setting,

- date and time setting,

- selection of the units.

Selection of the language

Once this menu has been selected, you can change the language used by the display (Deutsch, English, Espanol, Français, Italiano, Nederlands, Portugues, Portugues-Brasil).

"Telephone" menu

With the RD4 audio equipment switched on, once this menu has been selected you can conﬁgure your Bluetooth hands-free kit (matching), consult the various telephone directories (calls log, services, ...) and manage your communications (pick up, hang up, call waiting, secret mode, ...).

For further details concerning the "Telephone" application, refer to the RD4 part of the "Audio and Telematics" section.

For safety reasons, the conﬁgura-

tion of the multifunction displays by the driver must take place when stationary.

WARNING LIGHTS AND INDICATORS

MONOCHROME SCREEN CT Displays on the screen

When the ignition is switched on, this displays the following information automatically and directly:

- the time,

- the date,

- the outside temperature (if there is a risk of ice, you are warned by a message).

Warning messages (e.g.: "Fuel level low") and vehicle function status messages (e.g.: "Automatic switching on of the headlamps activated") may appear temporarily. These can be cleared by pressing the "ESC" button.

COLOUR SCREEN DT

General menu

When the RT3 GPS audio/telephone is switched on, select the menu which corresponds to the following applications:

- the satellite navigation system and the trafﬁc information,

- the audio sources (radio, CD, ...),

- the trip computer (consumption, route, ...),

- the directories,

- the telephone,

- the conﬁguration of the screen and the setting of the parameters of the vehicle’s equipment,

- the guidance on the map*,

- the displaying of a video*.

Controls

From the RT3 GPS audio/telephone control panel, to select one of the applications:

 press the "MENU" button to gain

access to the general menu,

 turn the dial to move the selection,  press the dial to conﬁrm the

selection,

or  press the "ESC" button to abandon

the operation in progress and return to the previous display.

For further details concerning these applications, refer to the RT3 part of the "Audio and Telematics" section.

* With colour screen DT only.

WARNING LIGHTS AND INDICATORS

"Conﬁguration" menu

Press the "MENU" button on the



RT3 GPS audio/telephone to gain access to the general menu.

 Turn the dial to select the

"Conﬁguration" menu, then press

it to conﬁrm.

Once this menu has been selected, you can gain access to the following functions:

Deﬁne the vehicle parameters

Once the "Deﬁne the vehicle parameters" menu has been selected, you can activate or deactivate certain driving and comfort equipment:

- wiper linked with reverse gear (refer to the "Visibility" section),

- directional headlamps (refer to the "Visibility" section),

- "follow-me-home" lighting and duration (refer to the "Visibility" section).

Example: setting the duration of the "follow-me-home" lighting

 Turn the dial to select the "Lighting

conﬁguration" menu, then press it

to conﬁrm.

 Select the line "Duration of the

"follow-me-home" lighting" then conﬁrm.

 Select the duration then press the

dial.

 Turn the dial to set the value required

(15, 30 or 60 seconds), then press the dial.

 Select the "OK" box, then conﬁrm.

+ 172 hidden pages