Pentax PV-T150A User Manual
Specifications and Main Features
- Rating of voltage supply 240 Voltage at frequency of 50 Hertz
- Provides telecasting service which is SECAM Standard
- Cartridge Format: VHS
- Head configuration.
- 3 Video Heads (2 for SP/LP/EP, 1 for special effects)
- 2 Hi-Fi Audio Heads
- 1: Full Track Audio/Video Erase Head
- 1: Combination Head for Control Track, Audio Erase, One Audio Recording and Playback Head.
- Speed of Tape: -33.35 mm/sec (SP), -16.67 mm/sec (lp), -11.12 mm/sec (ep)
- Speed of the Magnetic Tape is 12.7 mm
- Channel 3 or 4 for RF Output Television
- Channels VHF 75 ohm and UHF 300 ohm for RF INPUTS
- RANGE OF TUNING LOW ON VHF: CH2: 54MHZ TO 88 MEGA HERTZ.
- VHF HIGH, CH7 ~ 13 (174 MHz — 216 MHz)
- VHF MID (CH A-2, A-1 (108 MHz — 174 MHz)
- UHF CHANNEL 14 - 83 470 - 890 MHZ
- CHANNEL for VHF SUPER - J-W 216-300MHZ
- Video Input : R 1 — 2 Vp-p 75 ohm unbalanced
- VIDEO OUTPUT : R 1 Vp-p 75 which is ohm unbalanced
- VIDEO REC S/N : in excess of 46 db around (SP): 230.
- Horizontal resolution.240 lines sp and 230 lines in ep/ch LP.
- Audio Input: Line: 316 mVrms (—7.8 dB) 50 kohm
- Audio Output: Line: -7.8 dB, 316mVrms, 1,000ohm
- Audio S/N Ratio: 42 dB (SP)
- Frequency Range: SP 100Hz to 8kHz
- NHiFi Audio Frequency Range: 20Hz - 20kHz
- Wow and Flutter: Less than 0.005% WRMS
- Power Consumption: 39W Nominal
- Cabinet Size: Cm 43.5 x 9.5 x 34.5
- Weight: 17.6 lbs (8.0 kg)
- Accessories:
- Batteries
- Coaxial cable w/ adaptor
- 300-ohm flat lead twin cable
- VHF antenna adaptor
- Remote control unit
Frequently Asked Questions
Q1: What is the type of power supply required for the PV-T150A?
A1: This model requires an Ac power supply of 120v 60hz.
Q2: Can a normal used VHS be inserted in this VTR?
A2: Yes, this model is VHS compliant, that is, it accepts VHS tapes
Q3: How many programs can be used in timer recording?
A3: How many programs can be used in timer recording is up to 4.
Q4: What is the max recording time with this device?
A4: Max recording is with T -160 tape, 8 hours in the EP mode.
Q5: In the specification does this VTR allow integration of stereo audio recording?
A5: Yes, integration of the stereo audio recording is supported as well as playback.
Q6: In the specification does this VTR allow integration of the ability to automatically rewind the tape?
A6: Yes, once the tape has reached its stopping point, automatic rewinding can be done.
Q7: How to connect other audio as well as video input sources?
A7: Connecting other types of audio and video can be done through the AUDIO IN and VIDEO IN jacks located at the rear of the VTR.
Q8: If I have no picture with the VTR during playback, what steps should be followed?
A8: Make sure that the VTR is set on the appropriate channel also the connections are made appropriately.
Q9: Can the VTR be operated using a remote control?
A9: Yes, The VTR is fitted with an infrared remote control unit that can be used for the VTR operations.
Q10: When does the VTR Hi-Fi indicator light?
A10: The light turns on while tapes recorded with Hi Fi Vhs sound when the stereo Hi Fi is used as the recording.
User Manual
Loading...