English
E
≪
English Version
≫
©Asahi Optical Co., Ltd.
PRODUCTNo.27640 ＭＺ-Ｓ
PRODUCTNo.27641 ＭＺ-Ｓ
QUARTZDATE(BLACK)
QUARTZDATE(SILVER)
Technical Service Section.
05:01 H.Y
[ INDEX ]
Page
[OUTLINE OF DISASSEMBLY & ASSEMBLY] ...........................................................................................2
OUTLINE .................................................................................................................................................. 2
CHART OF DISASSEMBLY & ASSEMBLY......................................................................................2
[PROCEDURES OF DSASSENMBLY & ASSEMBLY] .....................................................................3
1.EXTERNAL PARTS....………………………………………………………………………………3
2. MAIN BODY & FRONT COVER BLOCK.................................................................................... 11
3. MAIN P.C. BOARD (0-T100).........................................................................................................15
4.DISASSEMBLY & ASSEMBLY OF FRONT COVER BLOCK..................................................... 17
5.DISASSEMBLY & ASSEMBLY OF MAIN BODY........................................................................20
6.TOP COVER ASSY. (0-A301) .........................................................................................................23
7.BACK COVER ASSY.(0-A201)....................................................................................................... 26
8. DATA TABLE(SPECIFICATION) ..................................................................................................27
9. PROGRAMMED SOFT WARE FLOW CHART............................................................................28
10.T ABLE OF JIG, TOOLS AND TESTERS......................................................................................34
**** LIST OF MAIN ITEMS FOR ADJUSTMENT AND CHECK ****
**** LIST OF MAIN ITEMS FOR ADJUSTMENT AND CHECK ****
**** LIST OF MAIN ITEMS FOR ADJUSTMENT AND CHECK ******** LIST OF MAIN ITEMS FOR ADJUSTMENT AND CHECK ****
1-0. EXTERNAL PARTS .......................................................................................................................... 3
1-1. [ADJ·CHCK] POSITIONING LIGHT RECEIVING SENSOR ........................................................ 4
1-8. [CHCK]CHECKING QUIESCENCE CURRENT……………………………………………………..…6
1-9.[CHCK] CHECKING FUNCTION.....................................................................................................6
1-10.[ADJ·CHCK] ADJUSTME NT WITH PROGRAMME SOFT WARE…..…………………….……….8
1-11.[CHCK] SHUTTER SPEED· X TIME LUG.....................................................................................9
1-12.[CHCK]EXPOSURE·DXCORRESPONDENT……………………………………………………9
1-13.[CHCK] CHECKING DATA IMPRINTING……………………………………………………....9
1-14.[CHCK] CHECKING AF· PZ……………………………………………………………………….10
2-0. MAIN BODY AND FRONT COVER BLOCK............................................................................... 11
2-2.[CHCK] MECHANICAL BACK......................................................................................................12
3-0. MAIN P.C. BOARD (0-T100)..........................................................................................................15
3-2.[ADJ] 0-T100, INDICATING POSITION IN VIEW FINDER.........................................................15
3-3.[ADJ] 0-O100, INDICATING POSITION…………………………………………………….……15
4-0. DISASSEMBLY & ASSEMBLY OF FRONT COVER BLOCK....................................................17
4-4.[CHCK] CHECKING MIRROR FUNCTION.................................................................................. 17
4-6.[CHCK] CHECKING MIRROR ANGLE………………………….……………………………….18
4-10.[ADJ·CHCK] AF JOINT OPERATING STROKE..........................................................................19
4-12.[ADJ·CHCK]VIEWFINDER FOCUS PARLLUX ………………………………………………19
27640 -1/34-
y prop
OUTLINE OF DISASSEMBLY
& ASSEMBLY
OUTLINE
OUTLINE
OUTLINEOUTLINE
Follow the procedure and the notice whenever disassembling & assembling 27640(MZ-S).
Chart for disassembly & assembly.
Chart for disassembly & assembly.
Chart for disassembly & assembly.Chart for disassembly & assembly.
1111.External Parts
.External Parts
.External Parts.External Parts
6.Top cover
6.Top cover
6.Top cover6.Top cover
7.Back cover
7.Back cover
7.Back cover7.Back cover
2222．．．．Body proper & Front cover
Body proper & Front cover
Body proper & Front coverBody proper & Front cover
Front cover block
Front cover block Body proper
Front cover blockFront cover block
Body proper
Body properBody proper
3.Main PC.B
3.Main PC.B
3.Main PC.B3.Main PC.B
5.Disassembly of
5.Disassembly of
5.Disassembly of 5.Disassembly of
Body proper
Body proper
Bod
erBody proper
4.Di
4.Disassembly &
sassembly &
4.Di4.Di
sassembly & sassembly &
assembly of Front
assembly of Front
assembly of Frontassembly of Front
cover.
cover.
cover. cover.
27640 -2/34-
Procedures
Procedures
ProceduresProcedures
of disassembly & assembly.
1. External Parts.
Parts numbers are described based for 27640(Black).
Refer to the Service Parts List for 27641(Silver).
[Note]
[Note] To prevent internal electronic circuit from being destroyed by the static electricity,
[Note][Note]
use anti-static matte and wrist strap.
[Preparation]
[Preparation] Remove eye cap FL, Hot shoe cover FL, Release socket cap, Sync. terminal,
[Preparation][Preparation]
Bottom cover F
[Disassembly]
[Disassembly]
[Disassembly][Disassembly]
1111----1.
1. Bottom cover (A401)
Bottom cover (A401)････Battery cap(0
1.1.
Bottom cover (A401)Bottom cover (A401)
1） Peel off A403(Country seal).
2） Unscrew 5 screws.
3） A401, 0-A412, D204, D205.
1111----2.
2. Top cover
Top cover（（（（0000----A301
2.2.
Top coverTop cover
1） Unscrew 6 screws •••Bottom side of Flash x1,Inside of
Battery chamber x１, Open back cover x1,
Both side of Eye piece lens x2, Left side of X terminal x1,
Front cover(A102) can be removed.
2） Peel off right hand side of Grip rubber, and remove Grip cover(A159).
Be careful not to make shortage the lead wires which are lying behind A159.
3） Discharge Main capacitor.
Lift top cover and discharge Main capacitor with
resistance of 100~1K.
Blue lead wire : (Xe+)•••On Flash PCB.
A35 Battery contact(－)•••Tightening position of
screw.
4） Red lead wire(No.21,X sync. terminal side)
5） 2 positions on connector（Lift both sides of white
portion for about 2mm, Flexi PCB. will be apart.）
[Note]
[Note] The durability of T100 connector is about
[Note][Note]
40 times. Be sure to handle very courteously.
6） 4 lead wires from Flash PCB(Q200).
7） Peel off PT(28X60)
8） Unsolder 7 lands on 0-T50 Flexi.
9） Remove 0-A301.
L-L,-S.
A301））））
A301A301
Battery cap(0----A412)
Battery cap(0Battery cap(0
A412)
A412)A412)
27640 -3/34-
1111----3.
3. P(Film chamber) side of Front
P(Film chamber) side of Front
3.3.
P(Film chamber) side of Front P(Film chamber) side of Front
cover(A153).
cover(A153).
cover(A153). cover(A153).
1 screw at side cover SW･･･
remove from X terminal side.
1111----4.
4. Front cover
Front cover（（（（A102
4.4.
Front coverFront cover
1111----5.
5. Back cover
Back cover（（（（0000----A201
5.5.
Back coverBack cover
A102））））
A102A102
A201））））
A201A201
1111----6.
6. Strap hook at Grip side
Strap hook at Grip side（（（（A12
6.6.
Strap hook at Grip sideStrap hook at Grip side
･･･
･･･1 screw.
･･････
A12））））
A12A12
1111----7.
7. Grip
Grip（（（（A150
7.7.
GripGrip
A150）、
）、3 screws
A150A150
）、）、
3 screws･･･
3 screws3 screws
･･･Unsolder
･･････
5 lands on 0-I230Flexi.PCB.
Install back cover to prevent shutter
curtains from being jammed.
[Assembling procedure]
[Assembling procedure]
[Assembling procedure][Assembling procedure]
1111----1. [Adj.
1. [Adj.････Conf.]
1. [Adj.1. [Adj.
[Preparation]
[Preparation] Pen light or similar one.
[Preparation][Preparation]
Conf.]Positioning of light receiving sensor
Conf.]Conf.]
1） Set the camera at mirror down condition(Original position).
2） Shut the light at eye piece portion by black tape.
3） Shine Pen-light on light sensor as shown in Fig.
Adjust positions of sensor by changing angles of Pen-light
st
until the light sensor pattern on 1
4） [Confirmation]
[Confirmation] The light sensor should position as shown in
[Confirmation] [Confirmation]
mirror become visible.
Fig. below and it should not be inclined.
0-I230
Pen-light
1
Sensor
st
Mirror
Center position of Sensor
AF Frame
0.6mm
5） [Adj.]
[Adj.] Remove M311. Adjust the position of sensor by loosening
[Adj.] [Adj.]
Center position of
retainer screws for sensor and moving whole assembly of sensor.
6） After adjustment is completed, apply screw lock to the 3 spots
on screws and light receiving sensor.
7） Install M311 while checking engagement.
Make sure that the smoother function of diopter lever.
[Reference]
[Reference]
[Reference][Reference]
Attaching brighter lens is advisable to assist better visibility.
(Example :FA 50mm f/1.4)
Torrelance:0.5±0.5mm
〔Actual size〕(0 ~1.0)
AF Frame
27640 -4/34-
1111----2. Grip
2. Grip（（（（A150
2. Grip2. Grip
1) Solder 5 lands on 0-I230.
2）3 Screws（A182 x2：Size1.7x3.5）
3) A12(Strap hook),1 screw･･･
Apply screw lock at the screw hole.
1111----3. Back cover assy.
3. Back cover assy.（（（（0000----A201
3. Back cover assy.3. Back cover assy.
1111----4. Body covering left
4. Body covering left（（（（A153
4. Body covering left4. Body covering left
1） A153･A7･･･Set A153 and AF mode SW to the AFS.
2） 1 screw(A184)･･･at the SW side.
1111----5. Front cover (A10
5. Front cover (A102)
5. Front cover (A105. Front cover (A10
1111----6.Top cover
6.Top cover（（（（0000----A301
6.Top cover6.Top cover
1） Solder 7 lands (0-T51)
2） Solder 4 lead wires (0-Q100)
(Viewing from rear side---In order Blue,
A150））））
A150A150
A301））））
A301A301
2)
2) 2)
A201））））
A201A201
A153））））
A153A153
0-I230
Brown, Black, Green)
3） Install A159.
4） Solder 2 lands on connector (T25, 0-T67). Insert Flexi.
horizontally and push in both white parts of it.
5） Solder red lead wire
(No.21 Sync. terminal side)
6） Install O-A301.
-1）Arranging lead wire and adhere PT(28x60)→
-2）6 screws(A61=1.7x13, A181=4.7x2.5, A187x3=1.7x5.5)
-3）Adhere A151(Grip rubber) very securely.
1111----7.Install tempor
7.Install temporally Bottom cover
7.Install tempor7.Install tempor
and Battery cover
and Battery cover
and Battery cover and Battery cover
for checking and adjustment.
for checking and adjustment.
for checking and adjustment.for checking and adjustment.
ally Bottom cover
ally Bottom coverally Bottom cover
27640 -5/34-
1111----8.[Check] Quiescence current
8.[Check] Quiescence current
8.[Check] Quiescence current8.[Check] Quiescence current
[Preparation]
[Preparation] Regulated power supply, Ampere meter(Circuit tester)
[Preparation][Preparation]
Power adaptor (Hand made : Modify Battery grip BG-10)
[Check]
[Check] Set regulated power supply DC5.5V(over 3A).
[Check][Check]
Make sure not exist any shortage or leakage in the circuit.
＊Quiescence current： Main SW/off / under 50μA.
Main SW/on（Light meter SW off）under 300μA.
1111----9.[Check] Checking function.
9.[Check] Checking function.
9.[Check] Checking function.9.[Check] Checking function.
[Preparation]
[Preparation]：Supply the voltage.（Be careful not to insert battery up-side down,
[Preparation][Preparation]
Be careful---the polarity of the battery is opposite to other MZ series cameras.)
1). Main SW, Release SW, TV dial on.
1). Main SW, Release SW, TV dial on.
1). Main SW, Release SW, TV dial on.1). Main SW, Release SW, TV dial on.
-1）Av (F--) will appear on external LCD when Main SW turns on.
-2）Diaphragm actuate lever (0-G100) swings up completely when Main SW set to Pre-view.
-3）The indication (Right · Bottom) in viewfinder remains ON for about 10 seconds when
depressing release button halfway.
-4）The shutter should be released and the shutter curtain should open when releasing
shutter button setting at [bu].
2). Switching A/M
2). Switching A/M···· TV auto button.
2). Switching A/M2). Switching A/M
-1）Attach FA lens. “P” or “Av” on external LCD should indicate when depressing
TV auto button.
-2）“P” or “Av” should change when switching diaphragm ring A to Manual or vise-verse.
3). Tv dial
3). Tv dial・・・・HOLD lever.
3). Tv dial3). Tv dial
-1）When turning Tv dial to the left and right, indication of P（Av）to Tv（M）and
Tv value should change accordingly.
-2）When turning Tv dial and setting HOLD lever to right, HOLD indication should brink
and Tv·Av value should not change.
4). Drive lever.
4). Drive lever.
4). Drive lever.4). Drive lever.
Confirm the functions at each shooting modes by switching Drive lever.
5). Light metering SW lever
5). Light metering SW lever・・・・AE
5). Light metering SW lever5). Light metering SW lever
-1）“＊” in viewfinder should indicate when depressing AE-L button and setting
Auto exposure mode.
“＊” in viewfinder should disappear when depressing AE-L button again.
-2）“＊” in viewfinder should disappear when switching light meter mode while turning “＊”
6). LCD illumin
6). LCD illumination button.
6). LCD illumin6). LCD illumin
Green illumination on external LCD should turn on when depressing LCD illumination
button and it should turn off automatically after about 10 second later.
7). Exposure
7). Exposure compensation
7). Exposure 7). Exposure
-1）Xv at right hand side in viewfinder should turn on when Xv dial is set at other than “0”.
-2）AEB should indicate when AEB dial is set ±1/2・±1.
-3）When setting Xv dial at ISO・PF・D , the indication should turn on and Tv dial should be
able to set each functions accordingly.
HOLD lever.
HOLD lever.HOLD lever.
on in viewfinder. (Simple checking method for light metering mode SW)
TV auto button.
TV auto button. TV auto button.
AE----L button.
AEAE
ation button.
ation button.ation button.
compensation (Xv) dial
compensationcompensation
(Xv) dial・・・・Auto bracket( AEB)dial.
(Xv) dial (Xv) dial
L button.
L button.L button.
Auto bracket( AEB)dial.
Auto bracket( AEB)dial.Auto bracket( AEB)dial.
27640 -6/34-
8). Back cover SW
8). Back cover SW···· Winding
8). Back cover SW8). Back cover SW
Winding···· Rewinding
Winding Winding
Rewinding
Rewinding Rewinding
-1）The film should be wound and exposure counter advances to [1] when loading 36ex.
test film, close the back cover and turn the main SW on.
-2）Release shutter several times and check to see the advancing film，the film counter
advances properly.
When the film is advances 30 exposures, Film mark should brink and PCV should
start ringing.
-3）Check to see that the film should be rewound when depressing mid - roll rewind button.
-4）There should not exist any abnormal sound or noise when winding and rewinding film.
9). Flash discharging
9). Flash discharging ···· Mode switching.
9). Flash discharging 9). Flash discharging
-1）Flash mark should indicate when the flash is popped-up.
Mode switching.
Mode switching. Mode switching.
-2）Flash mode should change when turning Tv dial while depressing side button.
-3）Check the function of Red eye reduction mode・A Auto discharge mode.
10). AF check(Attach FA lens and set at AF.S mode. )
10). AF check(Attach FA lens and set at AF.S mode. )
10). AF check(Attach FA lens and set at AF.S mode. )10). AF check(Attach FA lens and set at AF.S mode. )
-1）When depressing AF button while lens front cover is covered with fingers,
the distance ring should move from closest distance to infinity ().
-2）Assistance spot beam (continuous light) should work when depressing AF button
with lens front cap on and flash is popped-up.
-3）When turning Tv dial while pushing AF area mode lever to SEL, AF area switches
securely.
-4）AF area(point) should be fixed when the AF area mode lever is set to L.
6 divided AF area mode should work properly when mode lever switches A.
11). Lens mount index lamp.
11). Lens mount index lamp.
11). Lens mount index lamp.11). Lens mount index lamp.
Lens mount index lamp turns on when depressing mount lock button without lens
attached.
(It should be checked out in darker space.)
27640 -7/34-
1111----10.[Adjust
10.[Adjust････Check] Adjustment with programmed soft ware.
10.[Adjust10.[Adjust
Check] Adjustment with programmed soft ware.
Check] Adjustment with programmed soft ware.Check] Adjustment with programmed soft ware.
[Prepared]
[Prepared]（（（（Items with
[Prepared][Prepared]
□* 27640Programmed Software, □Personal computer, Display,
□Camera connecting cable for 27250, □Serial interface & cable, Buffer、
□AE standard lens for LX, □F8 Set ring, □Hexagonal driver 1.5 mm、
□Focus master lens for MEF（AF） or □Focus master lens for 2m,
□LX 1
□Shutter tester(measurable 1/6000sec.)
□A F sensor positioning jig： □Cross for 27250, □*Square for 27640, □*Cross for 27640
□* AF chart for 2m（Attached with Service manual, should used □Focus master lens for 2m,
□F/FA Lens 35-80mmF4-5.6(41280/41287),
□* Power source adapter(Hand made：modify Battery grip BG-10),
□* Temporarily Bottom cover and Battery cover, □ Regulated power supply,
□Battery(CR2)
1） Solder Camera adapter cable for 27250(MZ-5). (From left hand side, Orange, Red, Brown,
White, Yellow)
2） Insert Battery to the camera.
3） Adjust and check accordingly with Flow chart in 27640Program soft. (Page 28/34 to 33/34)
[Supplement]
[Supplement] Adjust shutter speed（1/6000Sec.）
[Supplement][Supplement]
Items with ““““****”””” means that exclusively use for 27640
Items with Items with
st
curtain reflector plate for TTL,
means that exclusively use for 27640））））
means that exclusively use for 27640 means that exclusively use for 27640
This adjustment must be done whenever replacing 0-T100 or 0-E000.
Procedure is identical with 27370(MZ-3).
1）Set the camera at consecutive mode at this stage and select the type of Shutter tester.
***** SHUTTER SPEED ADJUSTMENT *****
*SET DRIVE MODE SW OF CAMERA TO
CONSECUTIVE-FRAME MODE.
SHUTTER TESTER FOR 1/6000 SEC. ---[1]
SHUTTER TESTER [MODEL EF-5000] ---[2]
MAIN MENU ---[3]
Select [1] when the shutter tester is measurable shutter speed 1/6000 sec.
2）
(Example:EF-8000、7DF-50A1 for 645)
Select [2] when the shutter tester is measurable exposure values.
(Example:EF-5000 at EE mode)
3）Release the shutter several times and input the number accordingly with display on CRT.
（Refer to flow chart on Programmed soft ware.）
Refer to the Service manual for 27370 when using shutter tester 7DF-50A1 and EF-5000.
Refer and consult to operating manual for the other shutter testers.
27640 -8/34-
1111----11111.[Check] Shutter speeds, X
1.[Check] Shutter speeds, X----Time lug.
1.[Check] Shutter speeds, X1.[Check] Shutter speeds, X
[Jigs, Tools, Testers]
[Jigs, Tools, Testers] Shutter tester (1/6000sec. Measurable), AE master lens(ML-245).
[Jigs, Tools, Testers][Jigs, Tools, Testers]
1） Check manual shutter speeds.
[Note]
[Note] When measuring exposures not at the center of the aperture(1
[Note][Note]
use Shutter testers with master lens mounted and the light is slanted light or pin-point type.
[Standard]
[Standard] Tolerated range of manual shutter speed.(Center of Aperture)
[Standard][Standard]
S.Speed(sec.) Exposure time(ms) Exposure value(EV)
1/6000
1/4000
1/2000
2）Set 1/180 sec. and check X time lug.
Parallel light(24mm running time)
st
1
1111----12.[Check] Exposure value
12.[Check] Exposure value・・・・DX correspondence.
12.[Check] Exposure value12.[Check] Exposure value
1）Set camera at Programmed auto mode and measure the exposure values.
[Preparation]
[Preparation] Shutter tester, Master lens for AE.(ML-245)
[Preparation][Preparation]
[Standard]
[Standard] Exposure Value(Master lens for AE、Aperture A position)
[Standard][Standard]
☆ Check other exposure mode if necessary.
2）Check DX correspondent.
[Preparation]
[Preparation] DX correspondent film（ISO400, 200, 100, and others.）
[Preparation][Preparation]
Load film and make sure that the LCD indication is matching with ISO of the film inside.
(Supplement：It can be checked with ISO 5000 film.(All contact pieces are closed.)
1111----13.[Check] Checking Data imprinting.
13.[Check] Checking Data imprinting.
13.[Check] Checking Data imprinting. 13.[Check] Checking Data imprinting.
[Testers]
[Testers] Regulated power supply.
[Testers][Testers]
1-13-1. Checking Data imprinting LED.(Back cover)
[Note]
[Note] Be sure not scratch on contact piece.
[Note][Note]
1） Apply 4.5V to the terminal⑨(+) and ⑧()
as shown in Fig.
2） Check 1 LED turns on by making contact terminals ① and ⑧().
3） Check LED by shorting between ②～⑦ accordingly.
1111----13
13----2. Checking Data imprinting.(Main body)
2. Checking Data imprinting.(Main body)
1313
2. Checking Data imprinting.(Main body)2. Checking Data imprinting.(Main body)
[Preparation]
[Preparation] Logic tester・Analogue(Needle indication)Circuit tester.
[Preparation][Preparation]
[Note]
[Note] Be sure not scratch on contact land.
[Note][Note]
1）Same as the indication in viewfinder, connect resister(1k-2.5k) temporary for checking.
2） Turn Main SW ON (All LED should turn ON) and check followings.
3） DC 5V should exist between land ⑧ and ⑨(+).
Check to see if 2～4V output exist when shorting between
the land ⑨(+) and ①～⑦.
･･･ Over－0.05 ms 1st･･･ Over 0.25 ms
nd
･･･ Over 0.8 ms 2nd･･･ Over 1.35 ms
2
Brightness(LV) Tolerated range(EV)
LV6～14 ＋0.70～－0.50
LV15
LV16
Time lug.
Time lug.Time lug.
st
and 2nd) , please
0.112～0.283 ±0.7
0.172～0.345 ±0.5（～1/3000sec.）
0.370～0.644 ±0.4（～30sec.）
Ref. Value(Spot beam、21mmRunning time)
DX correspondence.
DX correspondence.DX correspondence.
＋0.95～－0.25
＋1.20～±0.00
1k－2.5k
27640 -9/34-
1111----14.[Check] Checking AF
14.[Check] Checking AF···· PZ
14.[Check] Checking AF14.[Check] Checking AF
[Testers and Jigs]
[Testers and Jigs]
[Testers and Jigs][Testers and Jigs]
PZ
PZ PZ
Collimator(or Optical regulator for MEF), Focus master lens, FA power zoom lens
----1.[Check] AF focus position (Using FI focus indicator)
1.[Check] AF focus position (Using FI focus indicator)
1.[Check] AF focus position (Using FI focus indicator)1.[Check] AF focus position (Using FI focus indicator)
Normally, AF focus point is the center only. FI checking at 6 points can be done
by Programmed soft ware.
1） Set focus mode [MF] and mount focus master lens onto the camera body.
2） Set the camera at collimator.
3） Set collimator chart and the position of AF sensor are aligning horizontally.
(Procedures are same as the positioning of AF chart and AF sensor in AF adjustment.)
4） Turn focus ring to right until it stops. Turn back slowly until in-focus mark turns on and
measure the focus position on master lens.(A)
Follow the same procedures from left side(B).
5） The center point between A . and B. should be in between －0.05～＋0.06mm.
（A+B）／2 = －0.05～＋0.06mm.
6） All 6 AF areas should be checked.
-2.[Check] AF mode
2.[Check] AF mode
2.[Check] AF mode2.[Check] AF mode
Check the function of MF・AF.C・AF.S with FA lens attached and switch AF mode lever.
----3.[Check
3.[Check]]]] PZ(Power Zoom)
3.[Check3.[Check
PZ(Power Zoom)
PZ(Power Zoom) PZ(Power Zoom)
Attach power zoom lens and check the function of power zoom.
1111----15.Bottom cov
15.Bottom cover (A401)
15.Bottom cov15.Bottom cov
er (A401) •••• Battery cover (0
er (A401) er (A401)
Battery cover (0----A412)
Battery cover (0 Battery cover (0
A412)
A412)A412)
W115
(0.2)
Remove temporally bottom cover.
1） D204,D205,0-A412.
2） A401･PT(7x15)･･･W115(t=0.2)：Temporally use→
3） 5 Screws(A186 x2 1.7X4.5, A187 x2 1.7X5.5, A188 x1
7X7.5)
4） [Check
[Check]]]] Check mechanical back.
[Check[Check
(The mechanical back may change by tightening A401.)
5） Attach Country seal(A403).
6） Install back covers and caps whatever removed
at disassembly.
27640 -10/34-
2.
2.
Main Body and Front cover block.
Main Body and Front cover block.
2.2.
Main Body and Front cover block.Main Body and Front cover block.
[Sequence of disassembly]
[Sequence of disassembly]
[Sequence of disassembly][Sequence of disassembly]
2222----1.
1. Bottom base plate(0
Bottom base plate(0----D201)
1.1.
Bottom base plate(0Bottom base plate(0
D201)
D201)D201)
1) 8 Screws, peel off 2 Flexi. from DT.
2) Unsolder 2lead wires(Black and Red)
from N300(PCV buzzer).
2222----2.
2. Removal of T100 Flexi, Lead wires.
Removal of T100 Flexi, Lead wires.
2.2.
Removal of T100 Flexi, Lead wires. Removal of T100 Flexi, Lead wires.
1) Bottom side･･･10 lead wires,2 Flexi.(when
replacing T100), 1 screw from bottom.
2) Unsolder 9 contacts on DX contact, 3 lands on T64.
(A37,A36)
Black
Red
DT(4x10)
PT(9x15)
0-T100(8) Blue White Red
T81 (5)
(0-I220) Black (N300)
(0-S300) Pink White
Orange Red Black (0-S250)
Gray
(0-S300)
T301(7)
1.7x4.0
3) 2 lead wires (Yellow, Purple) on Top.
4) Unsolder Red lead wire from X terminal,
1 Screw.
5) Unsolder 11 flex lands and lift up flexi. board.
6) Top grip side･･･2 Lead wires (Red, Black) from
0-S200, 1 lead wire(Black) from A35.
Unsolder 3 flexi. lands on 0-T27.
Unsolder 2 lands on 0-I240, remove 1 screw.
Unsolder contact piece of A34.
7) Unsolder 4 lands on Q200.
8) Top portion of Mount ring.
Unsolder 5 lands on T81,
Unhook flexi.
2222----3. O
3. O----I220(Mount SW)
I220(Mount SW) ･･･Remove one screw at the mount ring bottom left hand side.
3. O3. O
I220(Mount SW)I220(Mount SW)
TY-CNL-D1.7x4.0 0-I240(2)
0-T27(3)
A34 Black (A35) 0-Q200
T81 (5)
0-D201
R110/R120 (9)
T64 (3)
TY-CNL-D
DT(5x7) 0-J100(6) T61(11) Red
Black
Yellow Purple TY-CNL-D
(0-S200) Red, Black
T71
TY-CNL-D 0-I220
1.7x5.0
1.7x4.0
Gray
Orange
(0-G100)
27640 -11/34-
Loading...