Penlon OMV Franks Service Manual

OMV 50

Service Instructions

created by the participants of the

CCBRT Anaesthesia Maintenance Training Course 2008

Step 1

Remove pointer.

(1 screw)

Step 2

Remove label and scale.

(2 screws)

Step 3

Remove cover.

(3 screws)

Step 4

Mark position of inlet or outlet cone.

Also mark the position of the rack.

Step 5

Remove the rack.

(2 brass screws)

Important: Open the 2 counter nuts and

screws from the sides first. Otherwise

you will demage the 2 brass screws.

Step 6

Remove inlet cone.

(4 screws)

Remove regulator assembly.

(2 guskets)