Loading...
I N S T A L L A T I O N
TXB-N Spectra® IV IP
Communication Module
C3467M (4/10)
Important Notices
LEGAL NOTICE
SOME PELCO EQUIPMENT CONTAINS, AND THE SOFTWARE ENABLES, AUDIO/VISUAL AND RECORDING CAPABILITIES, THE IMPROPER USE OF WHICH MAY SUBJECT YOU TO CIVIL AND CRIMINAL PENALTIES. APPLICABLE LAWS REGARDING THE USE OF SUCH CAPABILITIES VARY BETWEEN JURISDICTIONS AND MAY REQUIRE, AMONG OTHER THINGS, EXPRESS WRITTEN CONSENT FROM RECORDED SUBJECTS. YOU ARE SOLELY RESPONSIBLE FOR INSURING STRICT COMPLIANCE WITH SUCH LAWS AND FOR STRICT ADHERENCE TO ANY/ALL RIGHTS OF PRIVACY AND PERSONALTY. USE OF THIS EQUIPMENT AND/OR SOFTWARE FOR ILLEGAL SURVEILLANCE OR MONITORING SHALL BE DEEMED UNAUTHORIZED USE IN VIOLATION OF THE END USER SOFTWARE AGREEMENT AND RESULT IN THE IMMEDIATE TERMINATION OF YOUR LICENSE RIGHTS THEREUNDER.
REGULATORY NOTICES
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
You may also find helpful the following booklet, prepared by the FCC: “How to Identify and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402.
Changes and modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission’s rules.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
OPEN SOURCE SOFTWARE NOTICE
This product includes certain open source or other software originated from third parties that is subject to the GNU General Public License (GPL), GNU Library/Lesser General Public License (LGPL) and different and/or additional copyright licenses, disclaimers and notices.
The exact terms of GPL, LGPL and some other licenses are provided to you with this product. Please refer to the exact terms of the GPL and LGPL at www.fsf.org (Free Software Foundation) and www.opensource.org (Open Source Initiative) regarding your rights under said license. You may obtain a complete corresponding machine-readable copy of the source code of such software under the GPL or LGPL by sending your request to digitalsupport@pelco.com and the subject line should read Source Code Request. You will then receive a link in the e-mail for you to download the source code.
This offer is valid for a period of three (3) years from the date of the distribution of this product by Pelco.
2 |
C3467M (4/10) |
Description
The TXB-N allows Spectra® IV and Spectra IV SE dome systems to transfer live video and data over an Internet protocol (IP) network. The IP module provides H.264, MJPEG, and MPEG-4 compression for use with most standard Web browsers. Once installed, the Spectra IV dome system retains all of the standard Spectra features, while adding IP connectivity.
NOTE: The TXB-N module is only compatible with Spectra IV dome systems that use version 1.07 or newer software. Dome systems with software older than version 1.07 do not have the capability to operate over an IP network.
MODELS
TXB-N-F Spectra IV IP communication module for in-ceiling back boxes
TXB-N-P Spectra IV IP communication module for pendant back boxes
Figure 1. TXB-N-F
Figure 2. TXB-N-P
C3467M (4/10) |
3 |
Installation
PARTS LIST
Qty Description
1TXB-N module
2MAC address label
1Resource Disk
1TXB-N Installation manual
1Spectra IV IP Operation/Configuration manual
1Device Utility Operation/Configuration manual
To access the back box PCB, use the following steps:
1.Turn off power to the dome system.
2.Remove the lower dome.
3.Remove the dome drive by pressing in the blue and red tabs on the sides of the dome drive. Gently rock the dome drive to release the blue tab first, and then release the red tab.
4.Open the hinged door to the box. Push the tab lock towards the back box wall of the unit and open the door (refer to Figure 3).
Figure 3. Spectra IV Back Box Interconnect Door
4 |
C3467M (4/10) |
Loading...