Pelco TW4008P, TW4016P, TW4032P Specsheet
PRODUCT SPECIFICATION
video transmission solutions
TW4000P Series Multichannel Video Transceivers
PASSIVE VIDEO TRANSMISSION OVER UNSHIELDED TWISTED PAIR
Product Features
• 8, 16, 32 Channel Versions Available
• No Power Required
• Built-In Surge Suppression
• Full Motion Color/Black-White Video up to 750 Feet (228.6 Meters)
• Supports Coaxitron® Control (PTZ Control Signals) up to
750 Feet (228.6 Meters)
• Compatible with All Pelco Twisted Pair Equipped Cameras,
Enclosures, and Domes
• Easy Termination with Screw Terminals
• Supports NTSC, PAL, and SECAM
• Rack Mountable
The
TW4000 Series
multichannel video transceivers can transmit
multiple video signals over unshielded twisted pair (UTP) cable.
The transceivers are available with 8, 16, or 32 channels and can be
mounted into an industry standard 19-inch (48.26 cm) wide
equipment rack.
SPECTRA®
COAXITRON
VIDEO
ONE TWISTED PAIR CABLE
FOR EACH VIDEO SOURCE
VIDEO COAXITRON
The transceivers can be used at the camera and monitoring locations.
They allow for easy connectivity with any video source or destination
device, such as cameras, monitors, and matrix switchers. These
transceivers will transmit video (color/black-white) and Coaxitron
(up-the-coax) PTZ control signals on the same pair of UTP wires.
CAMCLOSURE
TW4008P
TW4001P AS TRANSMITTER
TW4032P
®
®
MATRIX SWITCHER
IMPORTANT NOTE: PLEASE READ.
The network implementation is shown as a general representation only and is not intended to show a detailed network topology. Your actual network will differ, requiring changes
or perhaps additional network equipment to accommodate the system as illustrated. Please contact your local Pelco Representative to discuss your specific requirements.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C1682 / NEW 11-10-09
TECHNICAL SPECIFICATIONS
MODELS
TW4008P Passive, 8-channel video transceiver
TW4016P Passive, 16-channel video transceiver
TW4032P Passive, 32-channel video transceiver
ELECTRICAL/VIDEO
Power Source No power required
Wire Type Unshielded Twisted Pair (24 AWG maximum)
Wire Category Cat3 or better
Wire Impedance 100 ohms ± 20%
Wire Distance 750 ft (228.6 m) maximum using Cat5e or Cat6
Cable Type
Cat3 300 ft (91.44 m) 400 ft (121.92 m)
Cat5 500 ft (152.40 m) 650 ft (198.12 m)
Cat5e 750 ft (228.60 m) 750 ft (228.60 m)
Cat6 750 ft (228.60 m) 750 ft (228.60 m)
DC Loop Resistance 52 ohms per 1,000 ft (304.8 m)
Differential Capacitance 19pF/ft max
Transient Immunity 300 W peak pulse power (8/20 US)
Insertion Loss <1 dB; 0 to 8 MHz frequency range
Distance
(with Coaxitron)
Distance
(video only)
VIDEO CHARACTERISTICS
Video Input/Output 1 BNC; internally terminated in 75 ohms
Format NTSC, PAL, SECAM
Frequency Response DC to 10 MHz
Common Mode/Differential
Mode Rejection >60 dB typical
GENERAL
Construction Aluminum
Finish Black
Operating Temperature -40° to 185°F (-40° to 85°C)
Relative Humidity 0 to 90%, noncondensing
Data Transmission Supports Coaxitron up to 750 ft (228.6 m)
Dimensions 7.00" D x 17.50" W x 1.75" H
(17.78 x 44.45 x 4.44 cm)
Unit Weight
TW4008P 2.94 lb (1.33 kg)
TW4016P 3.10 lb (1.41 kg)
TW4032P 4.42 lb (2.00 kg)
Shipping Weight
TW4008P 5 lb (2.27 kg)
TW4016P 5 lb (2.27 kg)
TW4032P 6 lb (2.72 kg)
CERTIFICATIONS
•CE
• UL/cUL Listed
MECHANICAL
Connectors
BNC Video input/output
Screw Terminal UTP input/output
Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada
International
www.pelco.com
Tel: (800) 289-9100 • FAX: (800) 289-9150
Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120
Pelco, the Pelco logo, Spectra, Camclosure, and Coaxitron are registered trademarks of Pelco, Inc.
Product specifications and availability subject to change without notice.
©Copyright 2009, Pelco, Inc. All rights reserved.
Loading...