Pelco TW3001AR Specsheet
PRODUCT SPECIFICATION
video transmission
TW3001AR Single-Channel Video Receiver
ACTIVE VIDEO TRANSMISSION OVER UNSHIELDED TWISTED PAIR
Product Features
• Adaptive Technology Eliminates Manual Adjustments
• Full Motion Color/Black-White Video up to 4,000 Feet (1,219 meters)
• Supports Coaxitron® Control (PTZ Control Signals) up to 750 Feet
(228.6 meters)
• Compatible with All Pelco Twisted Pair Equipped Cameras,
Enclosures, and Domes
• Built-In Surge Suppression
• Easy Termination with Removable UTP Connector
• Supports NTSC, PAL, and SECAM
• Can Be Mounted Into a Pelco Fiber Rack
The
TW3001AR
is a single-channel active receiver that can receive
live video over unshielded twisted pair (UTP) cable.
The adaptive technology in the
TW3001AR
automatically adjusts
the low, medium, and high frequency components of the video signal
allowing for the best possible video transmission. The adaptive technology eliminates the need for manual adjustment by automatically
adjusting to provide the most favorable video transmission depending on cable length needed. The unit has been optimized for use with
Cat5e and Cat6 cable, although Cat3 and Cat5 cable can be used for
shorter distances.
The DIP switch on the bottom of the
TW3001AR
allows you to override the adaptive technology and manually select the cable distance.
You can select either 1,000 feet (304 meters), 2,000 feet
(609 meters), 3,000 feet (914 meters), or 4,000 feet (1,219 meters).
The LED on the front of the unit indicates the status of the receiver.
When it lights red there is no UTP video being received. A green light
means that UTP video is being received. A flashing amber light
means that there are pan/tilt/zoom (PTZ) and Coaxitron control
TW3001AR
SPECTRA lll
DOME
TW3001P
UTP CABLE
commands being received. The blue Pelco badge indicates there is
power whether you are using the 4-pin rack power connector or the
2-pin power connector. The
TW3001AR
has built-in surge
suppression.
The
TW3001AR
allows for multiple applications. For example, you
can connect the receiver to a matrix switcher, such as the CM6800,
and to passive devices, such as the TW3001P transceiver balun. The
transmission distance when using Cat5e ranges from 1,000 feet
(304 meters) to 4,000 feet (1,219 meters). For Coaxitron
devices, 750 feet (228 meters) is the maximum distance over UTP.
The receiver can be mounted into a fiber rack (RK5000PS-3U/
RK5000-3U), into the WM5001-3U wall mount base kit, or into the
supplied wall clip. Each receiver also has four rubber feet allowing
you to place it on a flat surface, such as a desk or shelf.
POWER SUPPLY
MONITOR
KBD300A
®
-control
C1666 / REVISED 1-07
CM6800
International Standards
Organization Registered Firm;
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS
MODEL
TW3001AR Active, single-channel video receiver
ELECTRICAL
Input Voltage 12 VDC or 24 VAC, 50-60Hz
Power Consumption 2.5 W
Wire Type Unshielded twisted pair (24 AWG maximum)
Wire Category Cat3 or better
Wire Distance 4,000 feet (1,219.2 meters) maximum using
Cable Type
Cat5e or Cat6
Maximum Distance
(with Coaxitron)
Maximum Distance
(video only)
Cat3e 750 ft (228.6 m) 1,500 ft (457.2 m)
e 750 ft (228.6 m) 3,000 ft (914.4 m)
Cat5
Cat5e 750 ft (228.6 m) 4,000 ft (1,219.2 m)
e 750 ft (228.6 m) 4,000 ft (1,219.2 m)
Cat6
DC Loop Resistance 52 ohms per 1,000 feet
Differential Capacitance 19pF/ft max
Transient Immunity 300 W peak pulse power (8/20 US)
VIDEO CHARACTERISTICS
Video Output 1 BNC
Format NTSC, PAL, SECAM
Frequency Response DC to 10 MHz
Common Mode/Differential
Mode Rejection >70 dB
OPTIONAL ACCESSORIES
WM5001-3U Wall mount base kit for single-width module
WM5001-3UEXP Wall mount expansion kit for single-width
module
RK5000-3U 19-inch rack mount chassis for 14 slots, no
power (3 RUs)
RK5000PS-3U 19-inch rack mount chassis for 12 slots, no
power (3 RUs)
EPS5000-120 External/redundant power supply, 1 RU,
120 W x 2
RK5001B-3U Blank filler panel, single width, for rack mount
MECHANICAL
Connectors
BNC Video output
4-Pin Connector Rack power
2-Pin Connector (2.5 mm) UTP input/output
2-Pin Connector (3.5 mm) Power
GENERAL
Construction Steel
Finish
Front Panel Gray metallic with black end caps
Chassis Black matte finish
Operating Temperature 32° to 167°F (0° to 75°C)
Relative Humidity 0 to 90%, noncondensing
Data Transmission Supports Coaxitron up to 750 feet
LED Indicators Pelco Badge
Dimensions 8.75" D x 1.08" W x 4.81" H
Unit Weight 1.0 lb (0.45 kg)
Shipping Weight 3 lb (1.36 kg)
(228.6 meters)
Status LED
(22.23 x 2.74 x 12.22 cm)
CERTIFICATIONS
• CE, Class A
• UL Listed
• UL Listed to Canadian safety standards
• FCC, Class A
Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada
International
www.pelco.com
Tel: (800) 289-9100 • FAX: (800) 289-9150
Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120
Pelco, the Pelco logo, and Coaxitron are registered trademarks of Pelco, Inc.
Product specifications and availability subject to change without notice.
©Copyright 2007, Pelco, Inc. All rights reserved.
Loading...