Pelco TF2000 Specsheet
PRODUCT SPECIFICATION
0.36
(0.91)
B
A
C
MOUNTING SCREW
TERMINALS
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
MODEL
TF2000
TF9000
B
2.98 (7.57)
3.10 (7.88)
C
1.91 (4.85)
2.20 (5.59)
A
2.36 (5.99)
2.75 (6.99)
TF2000
TF Series Power Supply
SINGLE 24 VAC CAMERA POWER SUPPLY, INDOOR
Product Features
• Cost Effective
• 20 or 50 VA Output
• Fuse Protection
• Class 2 Power Supply
The
TF Series Power Supply
that is ideal for use in fixed camera applications.
is a 24 VAC, Class 2 power supply
power solutions
To meet different installation requirements, two models are
available. The
TF2000
provides 20 VA output and the
provides 50 VA output.
These economical power supplies, which are for indoor use only,
plug into any 120 VAC duplex wall receptacle having a center screw.
A mounting screw in the top of the power supply replaces the screw
in the center of the receptacle cover to fasten the power supply
securely to the receptacle.
Two screw terminals on the power supply provide easy connection
of the 24 VAC output to one or more cameras.
A fuse inside the sealed unit provides protection against power
supply or camera failure.
TF9000
C656 / REVISED 1-06
International Standards
Organization Registered Firm;
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS
MODELS
TF2000 Indoor, camera power supply, 120 VAC input.
TF9000 Same as TF2000 except 50 VA output
ELECTRICAL
Input Voltage 120 VAC, 60 Hz
Output Voltage 24 VAC
Output Power
TF2000 20 VA
TF9000 50 VA
Overload Protection Internal fuse (non-serviceable)
Input Connectors Two blades
Output Connectors Two screw terminals
Recommended
Wiring Distances See chart below
The following are the recommended maximum distances (transformer to load)
and are calculated with a 10-percent voltage drop. (Ten percent is generally
the maximum allowable voltage drop for AC-powered devices.) Distances are
calculated in feet; values in parentheses are meters.
Recommended Wiring Distance Chart
Input
Voltage
24 V
AC 10
Total VA
Consumed
One fused, 24 VAC output, 20 VA
20 AWG
2
(0.5 mm
)
283
(86)
20
50
141
56
(42)
(17)
Wire Gauge
18 A
WG
(1.0 mm
451
(137)
225
(68)
90
(27)
16 A
(1.5 mm
716
358
143
WG
(218)
(109)
(43)
2
)
2
)
GENERAL
Construction Plastic
Finish Beige
Environment Indoor
Unit Weight
TF2000 0.80 lb (0.36 kg)
TF9000 1.70 lb (0.76 kg)
Shipping Weight
TF2000 1 lb (0.45 kg)
TF9000 2 lb (0.91 kg)
Pelco, Inc. W
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada Tel: (800) 289-9100 • FAX: (800) 289-9150
International Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120
www.pelco.com
orldwide Headquarters:
Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
Product specifications and availability subject to change without notice.
©Copyright 2006, Pelco, Inc. All rights reserved.
Loading...