ExSite® Enhanced 2 Series is purpose-built to monitor operations and control processes in hazardous
locations with risks of explosion due to the presence of flammable liquids, gases or dust. Rugged outdoor
cameras available in fixed, fixed compact, and PTZ, it meets stringent explosion proof and dust-ignition
proof requirements while complying with international standards (IECEx, ATEX, INMETRO, EAC Ex,
cULus, UKEx, KCs).
It provides to operators crisp and clear evidence with 30X optical zoom, with true WDR, and low light
capabilities for challenging lighting conditions common to hazardous areas. The ExSite® Enhanced 2
Series is built to survive in the harshest conditions, rated IP69 it protects from water, high wind, high and
low temperatures with an operating range of -40°to +60°C. It is also resistant to corrosive elements.
ExSite® Enhanced 2 Series cameras are easy to install and adaptable to most operational needs.
ExSite® Enhanced 2 Series cameras support a range of input power options. ExSite® Enhanced 2
Series cameras also come standard with wipers and sun shrouds, capturing desired video regardless of
the weather.
The ExSite® Enhanced 2 Series provides industry-leading image quality using a Full HD 1080p camera
producing up to 60 images per second. The camera’s image defog capability increases video quality in
poor visibility conditions and 3D noise filtering is available.
C5052S-B | 02/23
1
ExSite® Enhanced 2 Explosionproof PTZ Camera System
Product Specification, camera solutions
Video
ExSite® Enhanced 2 Series cameras provide flexible streaming options. The primary stream can be
compressed with efficient H.265, H.264 High or Main profiles, or MJPEG formats. It can be configured to
a variety of frame rates and variable bit rates to optimize image quality with bandwidth and storage
efficiency. Smart Compression is available on both H.264 and H.265, minimizing storage and bandwidth
utilization.
Open and Integrated
ExSite® Enhanced 2 Series cameras seamlessly connect to Pelco video management systems such as
VideoXpert®. ExSite® Enhanced 2 Series cameras integrate with major third-party systems through the
ONVIF Profile S, Profile G, and Profile T standards.
Standard Web Interface
Pelco cameras use a standard Web browser interface for easy remote setup and administration.
Controls are optimized for convenient one-step camera configuration for features including color,
exposure, flicker control, backlight compensation, and streaming.
Pelco Analytics
ExSite® Enhanced 2 Series cameras feature Pelco’s most advanced analytics technology.
Basic Analytics
ExSite® Enhanced 2 Series cameras feature basic video analytics including Simple Motion Detection
and Camera Sabotage.
Simple Motion Detection: These algorithms allow the camera to record or send an alarm when there is
motion detected in a selected zone or with the entire scene.
Camera Sabotage: An alarm is triggered if the lens is obstructed or when the camera is repositioned.
Pelco Smart Analytics
Pelco Smart Analytics uses object detection AI technologies delivering improved accuracy in both
perimeter protection and in crowded, indoor environments. Added processing power enables the
tracking and classification of over 50 objects. Objects are classified even when they remain stationary.
Pelco Smart Analytics go beyond people and vehicles to include car, truck, bus, motorcycle, and bicycle
classification. Ten different object behaviors can be recognized to create events integrated with many
VMS systems.
Objects DetectedBehavior Events
PeopleObjects in AreaObjects Enter Area
Vehicles with
Classification
Object LoiteringObjects Leave Area
Objects Crossing BeamObject Stops in Area
Object Appears or Enters AreaDirection Violated
Object Not Present in Area
Objects in Area: The event is triggered when the selected object type moves into the region of interest.
C5052S-B | 02/23
2
ExSite® Enhanced 2 Explosionproof PTZ Camera System
Product Specification, camera solutions
Object Loitering: The event is triggered when the selected object type moves into the region of interest
and then stays for an extended amount of time.
Objects Crossing Beam: The event is triggered when the specified number of objects have crossed the
directional beam that is configured over the camera’s field of view. The beam can be unidirectional or
bidirectional.
Object Appears or Enters Area: The event is triggered by each object that enters the region of interest.
This event can be used to count objects.
Object Not Present in Area: The event is triggered when no objects are present in the region of
interest.
Objects Enter Area: The event is triggered when the specified number of objects have entered the
region of interest.
Objects Leave Area: The event is triggered when the specified number of objects have left the region of
interest.
Object Stops in Area: The event is triggered when an object moves into a region of interest and then
stops moving for the specified threshold time.
Direction Violated: The event is triggered when an object moves in the prohibited direction of travel.
Pelco's Smart Compression Technology
Pelco’s Smart Compression Technology lowers bandwidth and storage requirements by up to 70%,
while reducing storage requirements. Our technology allows the user to make informed optimization
between storage savings and image quality.
Pelco’s Smart Compression Technology dynamically analyzes motion occurring within live video in realtime, to intelligently compress the information you don’t need, while retaining details with clear quality in
the areas that are important in the scene. By enabling Dynamic GOP, an added feature of Smart
Compression, the number of I-frames are automatically reduced in scenes with low motion. Based on the
complexity of scenes and motion occurring, such as a store room that has limited entry and exit, up to
70% bandwidth savings can be achieved.
Technical Specifications
Camera/Optics
ItemDescription
Resolution
Sensor Type
Maximum Resolution (H x
V) and Aspect Ratio
Dynamic Range
2.0 MP
1/2.8” progressive scan CMOS
(16:9) 1920 × 1080
WDROff83 dB
WDROn
Active Noise Filtering3DNoise Filtering
C5052S-B | 02/23
Up to 120 dB
3
ExSite® Enhanced 2 Explosionproof PTZ Camera System
Product Specification, camera solutions
ItemDescription
Lens
Horizontal Angle of View
Vertical Angle of View
Light Sensitivity
Iris ControlP-Iris, Automatic, Open, Closed
Shutter RangeAutomatic, Manual (1/1 to 1/30,000 sec)
Day/Night CapabilitiesMechanical IR cut filter. Automatic, Manual
Flicker Correction60 Hz, 50 Hz
White BalanceAutomatic, Manual
Backlight CompensationOn/Off
F1.6, 4.3-129 mm (30x zoom) remote focus and zoom
(16:9) 3.1°-64°
(16:9) 1.7°-38°
Color (33 ms); 0.1 lux
Mono (33 ms); 0.03 lux
Video
ItemDescription
Frame Rate60 fps
Video EncodingH.264, H.265
Pelco
Smart Compression, Motion JPEG
Video StreamsMulti-stream H.264, Multi-stream H.265, Motion JPEG
Software Features
ItemDescription
Smart Compression
Technology
On Screen DisplaysYes
Privacy Zones3D, up to 64 zones
Presets500 named presets
Tours10 named tours
Digital DefogAdjustable/Off
Yes, lowers bandwidth and storage requirements by up to 70%.
C5052S-B | 02/23
4
ExSite® Enhanced 2 Explosionproof PTZ Camera System
Product Specification, camera solutions
Network
ItemDescription
Open APIONVIF compliance version 1.02, 2.00, Profile S, Profile G, and Profile T
2 MP 30XEXP2230-62-GExSite® Enhanced 2 PTZ, 2 MP x 30, T6, 24 VAC, with ONVIF G
remote storage
2 MP 30XEXP2230-65-GExSite® Enhanced 2 PTZ, 2 MP x 30, T6, 120 VAC, with ONVIF G
remote storage
2 MP 30XEXP2230-67-GExSite® Enhanced 2 PTZ, 2 MP x 30, T6, 230 VAC, with ONVIF G
remote storage
Mounting Accessories
MPXWBA
MPXCOL
MPXCW
MPXWBTA
Cabling
Wall bracket for use with EXP2230 cameras. AISI
316L stainless steel.
Pole mount adapter for use with EXP2230
cameras or explosion protected washers. For pole
diameters from 110 mm (4.3”) to 150 mm (5.9”).
Max load 50 kg (110 lb.). AISI 316L steel.
Corner mount adapter for use with MBXMP or
EXP2230 cameras. Max load 50 kg (110 lb.). AISI
316L stainless steel.
Parapet or ceiling mount bracket for use with
EXP2230 cameras. AISI 316L stainless steel.
ExSite® Enhanced 2 Explosionproof PTZ Camera System
Product Specification, camera solutions
Operating
TypeCertification
Reduction
3/4" NPT x
1/2" NPT
Barrier cable gland with unarmored cable
IECEx / ATEX
/ EAC Ex
Temp.
-100°C (148°F) /
+400°C
(+752°F)
Maximum
Diameter
of the
External
CablePart Number
-OCTEX1/2-3/4P ---
Sheath (A)
Maximum
Diameter
of the
Internal
Sheath (B)
Maximum
Diameter of
the
Conductors
Bundle (C)
Barrier cable gland with armored cable
Cable gland with gasket with unarmored cable
C5052S-B | 02/23
9
ExSite® Enhanced 2 Explosionproof PTZ Camera System
Product Specification, camera solutions
Operating
TypeCertification
Cable gland with gasket with armored cable
Conduit sealing fitting
Temp.
CablePart Number
Explosion-Proof Communication Box
Maximum
Diameter
of the
External
Sheath (A)
Maximum
Diameter
of the
Internal
Sheath (B)
Maximum
Diameter of
the
Conductors
Bundle (C)
A communication box includes a 3-port RJ45 and 1 SFP port Ethernet switch and 24 VAC output for
powering up to one of the following:
l
2x EXC2602 fixed compact cameras
l
2x EXF2230 fixed cameras with 2x washer pump
l
1x EXP2230 PTZ camera with 1x washer pump
MBA1S5A
MBA2S5A
MBA3S5A
MBX1MAA
MBX2MAA
MBX3MAA
MBXMP
Aluminum housing, 230 VAC input.
Aluminum housing, 24 VAC input.
Aluminum housing, 120 VAC input.
AISI 316L stainless steel housing, 230 VAC input.
AISI 316L stainless steel housing, 24 VAC input.
AISI 316L stainless steel housing, 120 VAC input.
Adapter plate for communication box to MPXCOL
or MPXCW mounts. AISI 316L stainless steel
housing.
C5052S-B | 02/23
10
ExSite® Enhanced 2 Explosionproof PTZ Camera System
Product Specification, camera solutions
MBXWRE
Wrench for opening communication boxes, MBX.
MPXCOLPole mount adapter for use with MBXMP or
EXP2230 PTZ cameras. For pole diameters from
110 mm (4.3”) to 150 mm (5.9”).
Max load 50 kg (110 lb.).
AISI 316L stainless steel.
MPXCWCorner mount adapter for use with MBXMP or
EXP2230 PTZ cameras. Max load 50 kg (110 lb.).
AISI 316L stainless steel.
Explosion-Proof Washer
A 10L (2.6 gal) tank with integrated manual pump and delivery up to 20m (66 ft), 24 VAC/VDC input.
WASEX2T4AT
WASEX2T4IC
WASEX2T4IN
WASEX2T4KC
ATEX certified solenoid valve.
IECEX certified solenoid valve.
INMETRO certified solenoid valve.
KCs certified solenoid valve (only 24 VDC).
WASEX2T4GOR
WASEX2T4UL
EAC Ex certified solenoid valve.
cULus certified solenoid valve.
NXCOLPole mount adapter for use with EXF2230
cameras or explosion protected washers. For pole
diameters from 110 mm (4.3”) to 150 mm (5.9”).
Max load 50 kg (110 lb.).
AISI 316L stainless steel.
NXCWCorner mount adapter for use with EXF2230
cameras or explosion protected washers. Max
load 50 kg (110 lb.).
AISI 316L stainless steel.
Certifications
Safety and Environmental Certifications
l
FCC Part 15
l
CE
l
cULus Listed
l
ICES-003
C5052S-B | 02/23
11
ExSite® Enhanced 2 Explosionproof PTZ Camera System
Product Specification, camera solutions
l
RCM
l
IP66, IP67, IP68, and IP69 and Type 4X and Type 6P
l
BIS certification: IS 13252(PART 1):2010 / IEC 60950-1:2005 (certification only valid for the
codes: EXP2230-67 and EXP2230-62)
l
Salt Spray: IEC 60068-2-52
l
Camera certified by Videotec s.r.l.: modelMPX
Hazardous Certifications
l
Tamb -40°C to +55°C or +70°C
l
Cable entry temperature:
–
+81°C with Tamb ≤ +70°C, +80°C with Tamb ≤ +69°C for cULus
–
+80°C for other certifications
l
cULus Hazardous Locations Listed E319666
–
CLASS I, DIVISION 2, GROUPS A, B, C and D, T6...T5
–
CLASS II, DIVISION 2, GROUPS F and G, T6...T5
–
CLASS I, ZONE 1, AEx db IIC T6...T5 Gb
–
Zone 21 AEx tb IIIC T85°C... T100°C Db
–
Ex db IIC T6...T5 Gb X
–
Ex tb IIIC T85°C...T100°C Db X
l
IECEx ULD 11.0005X
–
Ex db IIC T6...T5 Gb
–
Ex tb IIIC T85°C...T100°C Db
l
DEMKO 12 ATEX 1031198X
–
II 2 G Ex db IIC T6...T5 Gb
–
II 2 D Ex tb IIIC T85°C... T100°C Db
l
INMETRO UL-BR 13.0063X
–
Ex db IIC T6...T5 Gb
–
Ex tb IIIC T85°C...T100°C Db
l
EAC Ex RU C-IT.HA91.B.00274/22
–
1Ex db IIC T6...T5 Gb X
–
Ex tb IIIC T85°C...T100°C Db X
C5052S-B | 02/23
12
ExSite® Enhanced 2 Explosionproof PTZ Camera System
Product Specification, camera solutions
l
KCs 16-KA4BO-0313X 16-KA4BO-0314X
–
Ex db IIC T6...T5 Gb
–
Ex tb IIIC T85°C...T100°C Db
l
UK Ex UL21UKEX2216X
–
II 2 G Ex db IIC T6...T5 Gb
–
II 2D Ex tb IIIC T85°C...T100°C Db
Models and Certifications Matrix
ModelATEXIECExEAC ExUKExINMETROKCs
EXP2230-62YesYesYes
EXP2230-65
YesYesYes
EXP2230-67YesYesYes
EXP2230-62-G YesYesYes
EXP2230-65-G
YesYesYes
EXP2230-67-G YesYesYes
Yes
Yes
Yes
Yes
Yes
Yes
YesYesYes
YesYesYes
YesYesYes
YesYesYes
YesYesYes
YesYesYes
cULus
C5052S-B | 02/23
13
ExSite® Enhanced 2 Explosionproof PTZ Camera System
Product Specification, camera solutions
Pelco, Inc.
625 W. Alluvial Ave., Fresno, California 93711 United States
(800) 289-9100 Tel
(800) 289-9150 Fax
+1 (559) 292-1981 International Tel
+1 (559) 348-1120 International Fax
www.pelco.com
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication are trademarks of Pelco,
Inc. or its affiliates. ONVIF and the ONVIF logo are trademarks of ONVIF Inc. All other product names and services are the property of
their respective companies. Product specifications and availability are subject to change without notice.