Peg-Perego Viaggio HBB, Viaggio HBB 120 Instructions For Use Manual

USA

EN Instructions for use

FIUS1201I145

WARNING:

Weight limits:

40 – 120 lbs

(18.2 – 54 kg)

Height limits:

39 - 55 inches

(99 – 140 cm)

• Do not install or use this child restraint until you read and understand all the instructions in this manual and the labels on the product. To avoid serious injuries to your baby, follow the instructions carefully. Keep the instruction manual in the dedicated pocket for future reference.

2

Table of Contents

Introduction .....................................................................3

Warning ......................................................................5

Safety information .........................................................8

Registration form ..........................................................9

Your car seat ...................................................................10

Product assembly prior to use .................................11

Product features ............................................................14

Vehicle seatbelts design and compatibility ........16

Installing the seat in the vehicle ..............................19

Securing the child in the seat ...................................23

Headrest height adjustment ....................................26

Backrest angle adjustment .......................................27

Using the booster without backrest ......................28

Cleaning and maintenance .......................................31

Replacement Parts .......................................................38

3

Introduction

Thank you for choosing

a PegPerego Viaggio HBB120 booster seat.

As with any other

PegPerego product, your

Viaggio HBB 120 has been

designed and certied by a dedicated team of engineers inside Peg Perego Research and Development Department.

Your Viaggio HBB 120

has been manufactured and assembled in a Peg Perego plant under certied quality procedures and using

rst quality materials of

certied tracked origins.

As with every car seat,

Viaggio HBB 120 is used

with a child inside a

vehicle,

travelling

fast on

highways or slow in the chaotic trac of today’s cities. This means that you need to use this car seat as a concerned parent, driving carefully when you have a child on board but also, before this, taking your time to explore the product, knowing all the features it has, the dierent possible uses, the proper and best installations. Go through this manual entirely, keeping your new product in sight, checking every point and understanding it. Install the product in your vehicle taking the necessary time and making tting trials

4

before using it with your child. Once you have read the manual, store it again in its proper pocket. This will make you sure that everybody looking after your child and using this seat will be able to look

for help in this manual. Should you see any malfunctioning feature, after taking the necessary

familiarization or if you see broken parts, do not hesitate to call Peg Perego Customer Service

@ 1-800-671-1701 for

help. Now that you know your new Viaggio HBB

120 , you are ready to

enjoy safe and happy journeys with your family and your children.

Introduction

5

Warning

• Do not install or use this child restraint until you read and understand all the instructions in this manual and the labels on the product. To avoid serious injuries to your baby, follow the instructions carefully. Keep the instruction manual in the dedicated pocket for future reference.

• Your child could be seriously injured if you do not follow instructions and warning labels correctly.

• Use only the vehicle's lap and shoulder belt system when restraining the child in this booster seat. Snugly adjust the belt around baby’s body making sure that the belt

lies at with no slack.

• This car seats meets or exceeds all applicable Federal Motor Vehicle Safety Standard 213 requirements for use in motor vehicles. This restraint is NOT certied for aircraft use since aircraft seats are normally equipped with lap belt only.

• Not all available models of seatbelts are approved for use with this product. Refer to the dedicated section in this manual for further details.

• Viaggio HBB120 can be secured to your vehicle by means of lower universal anchorage system (LATCH) for added stability. Refer to the dedicated section in this

6

manual for installation details and check your vehicle owner’s manual for further details.

• This car seat is designed to be installed on front facing vehicle seats only. Never use on seats looking sideways or rearward facing. Do not use in cars with door-mounted or motorized shoulder belts. Read your vehicle owner’s manual for additional information.

• According to accident statistics, children are safer when properly restrained in the rear seating positions.

• Complete and send in the registration form provided with this product right away. In case of an accident: if

this car seat is involved in a car accident, it may be no longer safe for use. You may need to get a new unit. Call customer service @ 1-800-671-1701 for help.

• Seat covers and pads provided in this product are part of the product and the certication program. The use of non approved covers or other accessories are not recommended .

• EPS components (white soft foam located below the upholstered covers) are integrated in the product as safety related parts and should never be removed or severely damaged.

• Secure this car seat in the car even when not

Warning

7

occupied. This car seat is a heavy object that could cause severe damage to other occupants in case of an accident.

• Keep ngers away from moving parts.

Warning

8

Safety Informations

• Use Viaggio HBB120 in forward facing mode with children weighing in the range 40 – 120 lbs (18.2 – 54 kg) and whose height is between 39 and 55 inches ( 99 – 140 cm ).

• When placing your child in the seat, make sure that bulky jackets or covers are removed. This will make the use of seatbelts easier and therefore correct.

• Do not leave your child unattended in the vehicle, even for a short period. He/she could get tangled in the straps and be seriously injured or could move or tip the seat.

• Do not leave the car seat under direct sunlight for a prolonged time. The seat may become very hot and burn your child’s skin.

• When not in use, store the product in a proper place, away from light, moisture, excessive heat or cold.

• Do not place this car seat on countertops, tables or soft surfaces.

• Do not try to remove or add parts unless where explained in this manual; do not try to repair this product. In case of damage or defective components, call customer service @ 1-800-671-1701 for help.

• Do not leave loose objects, bags or luggage in the vehicle cockpit. In case of an accident they could suddenly move causing the occupants to be injured.

9

Registration Form

Important! Child restraints could be recalled for safety reasons. You must register this restraint to be reached in a recall. Send your name, address and the restraint's model number and manufacturing date to:

Peg Perego U.S.A., Inc. 3625 Independence Drive Fort Wayne, IN 46808 Or call 1-800-671-1701 (toll free)

For recall information, call the U.S. Government’s Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153) Or go to ttp://www.NHTSA.gov

Data required to ll the registration form (model number, model name, date of manufacturing, etc.) are indelibly printed on a label located in the picture shown here. Registration form is attached to the product cover. Detach the form, ll in and mail to PegPerego. No stamp is needed. We have already paid for it. Should the registration form be missing, please call Customer Service @ 1-800671-1701 for a replacement form.

10

Your car seat

Recline handleCup holder

Seat

Armrest Lap belt router

Backrest

Instruction

manual pocket

Shoulder belt router

Headrest adjustable handle

Latch connectors

Headrest

Latch strap

11

Product assembly prior to use

1. Always check the

product prior to assembly. The product is composed of an headrest (a) a backrest (b) and a seat (c). Backrest and headrest are factory assembled. To assemble correctly the product please follow the instructions carefully. In case of missing or malfunctioning parts, please contact our Customer Service @ 1-800-671-1701 for help.

12

Product assembly prior to use

2. Rotate the red stops

in the open position and slide the backrest in the housings located behind the seat as shown in the picture.

3. Keeping the product flat, close the red stops until a click is heard.

13

Product assembly prior to use

4. Rotate the backrest in

the elevated position (a)

until a loud click is heard.

The backrest will be free

to rotate between the

two stops as shown in the

picture (b). The product is

now ready for use.

IMPORTANT NOTE:

Viaggio HBB 120 is a

High Back Booster. Its

headrest and backrest

have been designed on

the experience made

in side impact dynamic

testing. Being designed

to elevate the seating

surface of your child,

it becomes extremely

important that your

child’s head, which

would lean close to a

glass vehicle window

in a backless booster, is

protected from injuries at all times. Always use this product with its backrest and headrest.

A

14

Product features

1. The product is

equipped with two integral cup holders, located at the side of the seat. To operate the cup holder, simply pull /push the part until it stops.

WARNING: never put hot liquids in the cup holder. Your child or a nearby occupant may become injured in case of a turn or sudden stop.

2. The product is equipped with a movable foot to adjust seat angle. The foot is spring loaded. To operate it, pull the handle located in front of the seat and rise the seat at the same time. The foot will pop out in the reclined position.

15

3. To return the foot to the original position, pull the lever again and push the seat downward.

Product features

16

Vehicle seatbelts design and compatibility

Viaggio HBB is designed to be installed with vehicle belts commonly fitted on most of the available cars. However, in the market there are several different types of vehicles manufactured in different periods. As a result, there are many different vehicle belt designs. Unfortunately, some may be unsuitable for a safe installation of Viaggio HBB. Please read carefully the list below and in case of problems or doubts, double check your vehicle owner’s manual or call PegPerego Customer Service @ 1-800-671-1701 for additional help.

17

Vehicle seatbelts design and compatibility

NON COMPATIBLE VEHICLE BELT DESIGNS

WARNING: do not use Viaggio HBB with the

following vehicle belt design:

1. Lap/motorized

shoulder belts. Belts mounted on the door

2. Lap belt only of any kind.

18

NO

Vehicle seatbelts design and compatibility

3. Side facing seats

4. Rear facing seats or seats that rotate in dierent

positions

For your child’s safety, always read your vehicle owner’s manual for further informations.

19

Installing the seat in the vehicle

1. Lean the child seat on

the selected vehicle seat in forward facing mode.

2. Primo Viaggio HBB120 is equipped with LATCH connectors to be used with your vehicle’s lower anchors. Connectors are stored in the back side of the seat. To use the connectors, push the central adjuster in the front of the seat and pull the connectors by hand out of the housing at the same time.

20

3. Attach the connectors to the vehicle’s lower anchors. An audible click is heard when the product is attached to the lower anchors. Pull the central strap (b) and push the product against the seat (c). Check that the product is attached by moving it sideways. Attaching the child seat with LATCH connectors to the vehicle seat means that it is possible to leave it in place even when not occupied.

4. To detach the product, push on the central adjuster to release the child seat and move it away from the vehicle seat. Expose the connectors red button and push the

Installing the seat in the vehicle

B

C

A

21

button in order to release the seat.

IMPORTANT NOTE:

use of LATCH connectors are recommended by PegPerego to achieve the best stability of the product in case of sudden stops or steep turns. Also, using the LATCH will give guarantee that the product is located in the correct position with respect to the vehicle belt attachment points. It must be pointed out that use of the LATCH connectors will not add to the safety of the product in case of an accident. This product is fully tested with and without the use of LATCH connectors

Installing the seat in the vehicle

PUSH

22

5. In case of lower anchors unavailability and whenever the product is used without LATCH connectors, make sure that the product leans firmly on the seat.

IMPORTANT NOTE:

in this case, make sure that the product is removed from the vehicle’s interior whenever it is not occupied by a child passenger or restraint the product with vehicle seatbelt. The seat is an heavy object that could cause severe damage to other occupants in case of an accident.

Installing the seat in the vehicle

23

Securing the child in the seat

1. Make sure that

your child is sitting comfortable in the seat, with the back fully against the backrest of the product. Pull the vehicle belt and make sure that the lap portion of it passes below both armrests.

2. Buckle the belt (an audible click is heard) and make sure that both lap and diagonal belt passes below the armrest located next to the seatbelt buckle. Pull on both lap and diagonal belt making sure that the belt is not entangled anywhere.

24

3. Tread the diagonal belt in the red router located below the headrest. To do this slide the belt from outside toward the center of the product. Check that the belt is not twisted when doing this operation.

Securing the child in the seat

25

Securing the child in the seat

4. Picture shows the

correct belt pattern

around the child in your

Primo Viaggio HBB 120.

26

1. Headrest is adjustable in 6 different positions. To adjust the backrest, pull the lever located behind and move the headrest up and down to the desired position. When the handle is released the headrest will lock in place. Move the headrest up and down to ensure that the lock is properly engaged.

2. With the child in the seat, adjust headrest height making sure that the belt passes at or above shoulder level. The headrest is properly set when the diagonal belt router is located at no more than 2 cm above shoulder level and the diagonal lies at the center of child’s chest.

2 cm

1

5

4

2

3

6

5

4

6

1

2

3

Headrest height adjustment

27

Backrest angle adjustment

1. For longer journeys,

the product can be used in a comfort position. This will guarantee that your child will sleep keeping the head gently leaned on the headrest and being kept protected by the side wings in case of a lateral impact. To reach the comfort position recline the seat as explained at page 15 by pulling the recline handle (a). Adjust the backrest of your vehicle’s seat following your vehicle owner’s manual (b). Viaggio HBB120 backrest will follow the vehicle backrest thanks to its free hinge.

A

B

28

Using Viaggio HBB without backrest

Your Viaggio HBB has been designed to have a removable high back backrest. The backrest will provide protection to your child’s head and shoulders in a side collision.

Please, use Viaggio HBB without its backrest only under the following conditions:

1 – when really needed

2 – when the diagonal belt lies on the shoulder, away from your child’s neck and below ear level, as shown in the picture.

29

To remove the backrest:

Rotate the red stops in the open position and slide the backrest out of its housing.

Using Viaggio HBB without backrest

30

Using Viaggio HBB without backrest

1. Make sure that

your child is sitting comfortably in the seat, with the back fully against the vehicle seat backrest. Pull the belt and make sure that the lap portion of it passes below both armrests.

2. Buckle the belt (an audible click is heard) and make sure that both lap and diagonal belt pass below the armrest located next to the seatbelt buckle. Pull on both lap and diagonal belt making sure that the belt is not entangled anywhere.

31

Cleaning and maintenance

Your product requires a minimum of cleaning and maintenance. Do not clean with harsh products or solvents. Keep moving parts clean. In case, clean plastic parts with a damp cloth. Do not use water with harness and latching mechanisms. Protect the product from extreme cold, water, rain and sun exposure. Prolonged exposures to these elements can change the colors in the material but also change their mechanical properties. Store the product in a dry area if not used for long periods. The upholstery is likely to be removed and cleaned frequently. Follow the procedure below to remove the fabric and reassemble it properly. Check the product features before disassembly and make sure that the same features are still working once the product is set up for use again. Extra care is required when removing padding to avoid breaking the white EPS panels on the product. All the upholstered covers (seat, backrest and headrest) can be machine washed at 87° F (30° C)

32

Cleaning and maintenance

1. To remove the seat

upholstery: recline backrest until it lies flat; undo plastic hooks starting with rear of the seat (a and b); undo snap buttons located under the armrest (c and d; pay attention to hold the button properly in order to avoid ripping the upholstery apart); undo plastic hooks in the front part of the seat cover (e, f and g).

2. Remove plastic hook plates from the pocket located under the seat.

33

Cleaning and maintenance

3. To remove the

backrest upholstery, undo the plastic cover first unsnapping it from the top, as shown in the picture.

4. Undo the elastic bands from the hooks located in the backrest structure. Before undoing the hooks for the first time make sure that the correct pattern is understood.

34

Cleaning and maintenance

5. Remove the backrest

upholstery from bottom first. Then free the shoulder cover from its structure.

6. Remove the headrest plastic cover unsnapping it from below as shown in the picture (a). Undo elastic hooks from the headrest structure (b).

A

B

35

Cleaning and maintenance

7. Remove headrest

upholstery.

8. To refit the backrest upholstery in place, first fit the shoulder cones and then the bottom part.

36

Cleaning and maintenance

9. Attach the elastic

hooks in the center lower structure of the backrest.

10. Put the backrest plastic cover in place as shown in the picture (lower part first, then upper snaps).

37

Cleaning and maintenance

11. Put the headrest

plastic cover in place as shown in the picture (upper part first, then lower snaps).

38

1) ASPI0148NF

2) SPST7164NF

3) BRIVIA•

4) BSCVIA•

5) BSAVIA•

1

2

3

4

5

Replacement Parts

NOTE: Spare parts available in different

colors* to be specified when ordering.

USA

EN Instructions for use

FIUS1201I145

WARNING:

Weight limits:

40 – 120 lbs

(18.2 – 54 kg)

Height limits:

39 - 55 inches

(99 – 140 cm)

• Do not install or use this child restraint until you read and understand all the instructions in this manual and the labels on the product. To avoid serious injuries to your baby, follow the instructions carefully. Keep the instruction manual in the dedicated pocket for future reference.