Peerless Industries PRS 274-W, PRS 274-S, PRS 274 User Manual

TECHNICAL D ATA SHEET -

page 1 of 2

PRS Series Projector Mount for InFocus™ LP-820 Projector

MODELS: PRS 274, PRS 274-S, PRS 274-W

The PRS Series Projector Mount is the most low profile mount available today and offers the easiest installation. It ships completely pre-assembled and offers unmatched versatility . It can be mounted to any common ceiling structure and is offered in multiple colors to complement any setting. It was specifically designed to save time and money when mounting projectors.

Features:

• +5°/-20° Pitch, +/-10° Roll, 360° Yaw (when attached to an extension column), +/-15° Yaw (when flush mounted), which enables the image to be perfectly aligned with the screen

• Mount completely pre-assembled to save you time

• Independent roll, pitch, and yaw adjustments provide easy image alignment

• Can be mounted directly to a single wood beam or concrete slab without disassembling the mount and without reinforcing the ceiling

• Can attach to 1 1/2" extension column, 3/4" extension column, or 3/8" threaded rod

• Armor Lock

™

security screws pre-installed for a secure installation in

minutes

• Quickly release the projector for maintenance with the simple turn of a knob

• Built in cord management access hole provides complete access to route cords through extension column to keep cords hidden

• 4 adjustment points allow a quick, simple installation

• Final security lock down is optional to use

• Easily and quickly attaches to projector-specific adapter plate

• Offered in black, white, and silver to complement any setting

• Low profile allows the projector to be close to the ceiling

• Offers the fastest installation to reduce installation time and costs

PRS

SERIES

GENERIC

ADAPTER

PLATE

PROJECTOR

MOUNT

Accessories:

• Ceiling Plates (various models available)

• Cord Wrap (ACC 852, ACC 852S, ACC 852W)

• Fixed and Adjustable length Extension Columns, 1 1/2" NPT (“EXT” or “ADJ” models)

• Fixed length Extension Columns, 3/4" NPT (“FLP” models)

• Armor Lock Plus™ security cable with Lock (ACC 020)

• Armor Lock Plus security cable (ACC 021)

• Side to Side Adjuster (ACC 830)

Dimensions:

For product dimensions, see page 2.

A R C H I T E C T S S P E C I F I C A T I O N S

The PRS Series Projector Mount shall be a Peerless model and shall be located where indicated on the plans. It shall feature 25°(+5°/-20°) pitch, 20°(+10°) roll, 360° yaw (when attached to an extension column), and +/-15° yaw (when flush mounted). It shall have a 25 lb load capacity. It shall have a quick release spring loaded screw for easy removal and installation of the projector. It shall be constructed of aluminum alloy finished in black, white, or silver. Assembly and installation shall be done according to instructions provided by the manufacturer.

Peerless Industries, Inc.

3215 W. North Ave. Melrose Park, IL 60160 708-865-8870 800-865-2112 Fax 708-865-2941

www.peerlessmounts.com

Peerless is a registered trademark and Armor Lock and Armor Lock Plus are trademarks of Peerless Industries, Inc.

All other brand and product names are trademarks or registered trademarks of their respective owners.

ISSUED: 02-27-06 SHEET NO: 056-9579-1

page 2 of 2

TECHNICAL DATA SHEET

MODEL # DIMENSIONS WEIGHT WEIGHT X Y Z CAP ACITY

P AP 274 10.00 x 9.25 x 1.00 1.3 1.1 7.13 2.48 3.25 25

TOP VIEW

P AP 274-S (254 x 235 x 25) (0.6) (0.5) (181) (63) (83) (11.3) P AP 274-W

PRS 274 12.25 x 9.63 x 4.00 3.2 2. 3 7.13 2.48 3.25 25 PRS 274-S (31 1 x 244 x 102) (1.5) (1.0) (181) (63) (83) (11.3) PRS 274-W

All dimensions shown above as in / (mm). All weights shown as lb / (kg).

FRONT VIEW

Note: Y is the dimension from the top of the adapter plate to the center of the lens on the projector.

MODELS: PRS 274, PRS 274-S, PRS 274-W

CARTON SHIPPING PRODUCT DIMENSIONS MAX LOAD

4.6

(117)

ROLL +10°